Re: [BUG] [ tip/sched/core ] System unresponsive after booting

[Daniel Lezcano]

On 01/15/2014 01:04 PM, Peter Zijlstra wrote:
> On Wed, Jan 15, 2014 at 09:27:34AM +0100, Daniel Lezcano wrote:
> > Hi all,
> >
> > I use the tip/sched/core branch.
> >
> > After git pulling yesterday, my host is unresponsive after booting the OS.
> >
> >   * It boots normally
> >   * It sends info to the console
> >   * The graphics does not work
> >   * The terminals show the prompt, I can enter the username but after
> > pressing enter, it does not give the password prompt
> >   * sysrq works more or less, I can't get the process stack but it receives
> > the command
> >
> > It is like no new process can be created.
> >
> > I have a dual Xeon processor E5325 (2 x 4 cores).
> >
> > After git bisecting, the following patch seems to introduce the bug.
> >
> > commit d50dde5a10f305253cbc3855307f608f8a3c5f73
>
> OK, so my headless WSM-EP boots just fine. Obviously it cannot confirm
> if graphics works, but I can ssh in and work on it without bother.
>
> I can even log in on the serial console without problems.
>
> I tried both tip/master and tip/sched/core.
>
> Would you happen to have a .config for me to try?

I was able to reduce the scope and reproduce the issue.

AFAICT, that happens with rsyslogd. When login in a tty, the login 
command sends a message through /dev/log. But rsyslogd is never woken up 
and blocked in poll_schedule_timeout. The login process is blocked in 
unix_wait_for_peer.

I can strace rsyslogd at startup. The two last sched_setscheduler calls 
fail.

> grep sched trace.out

3570  sched_getparam(3570, { 0 })       = 0
3570  sched_getscheduler(3570)          = 0 (SCHED_OTHER)
3570  sched_get_priority_min(SCHED_OTHER) = 0
3570  sched_get_priority_max(SCHED_OTHER) = 0
3571  sched_get_priority_min(SCHED_OTHER) = 0
3571  sched_get_priority_max(SCHED_OTHER) = 0
3571  sched_get_priority_min(SCHED_OTHER) = 0
3571  sched_get_priority_max(SCHED_OTHER) = 0
3571  sched_setscheduler(3572, SCHED_OTHER, { 0 } <unfinished ...>
3571  <... sched_setscheduler resumed> ) = 0
3571  sched_get_priority_min(SCHED_OTHER <unfinished ...>
3571  <... sched_get_priority_min resumed> ) = 0
3571  sched_get_priority_max(SCHED_OTHER <unfinished ...>
3571  <... sched_get_priority_max resumed> ) = 0
3571  sched_setscheduler(3573, SCHED_OTHER, { 0 } <unfinished ...>
3571  <... sched_setscheduler resumed> ) = -1 EPERM (Operation not 
permitted)
3571  sched_get_priority_min(SCHED_OTHER <unfinished ...>
3571  <... sched_get_priority_min resumed> ) = 0
3571  sched_get_priority_max(SCHED_OTHER <unfinished ...>
3571  <... sched_get_priority_max resumed> ) = 0
3571  sched_setscheduler(3574, SCHED_OTHER, { 0 } <unfinished ...>
3571  <... sched_setscheduler resumed> ) = -1 EPERM (Operation not 
permitted)

The same strace but on a kernel which does not hang. The calls to 
sched_setscheduler do not fail.

3292  sched_getparam(3292, { 0 })       = 0
3292  sched_getscheduler(3292)          = 0 (SCHED_OTHER)
3292  sched_get_priority_min(SCHED_OTHER) = 0
3292  sched_get_priority_max(SCHED_OTHER) = 0
3293  sched_get_priority_min(SCHED_OTHER) = 0
3293  sched_get_priority_max(SCHED_OTHER) = 0
3293  sched_get_priority_min(SCHED_OTHER) = 0
3293  sched_get_priority_max(SCHED_OTHER) = 0
3293  sched_setscheduler(3294, SCHED_OTHER, { 0 } <unfinished ...>
3293  <... sched_setscheduler resumed> ) = 0
3293  sched_get_priority_min(SCHED_OTHER <unfinished ...>
3293  <... sched_get_priority_min resumed> ) = 0
3293  sched_get_priority_max(SCHED_OTHER <unfinished ...>
3293  <... sched_get_priority_max resumed> ) = 0
3293  sched_setscheduler(3295, SCHED_OTHER, { 0 } <unfinished ...>
3293  <... sched_setscheduler resumed> ) = 0
3293  sched_get_priority_min(SCHED_OTHER <unfinished ...>
3293  <... sched_get_priority_min resumed> ) = 0
3293  sched_get_priority_max(SCHED_OTHER <unfinished ...>
3293  <... sched_get_priority_max resumed> ) = 0
3293  sched_setscheduler(3296, SCHED_OTHER, { 0 } <unfinished ...>
3293  <... sched_setscheduler resumed> ) = 0

The EPERM error comes from kernel/sched/core.c:3303

...
		if (fair_policy(policy)) {
			if (!can_nice(p, attr->sched_nice))
				return -EPERM;
		}
...


But I don't know why this is leading to block a process or making 
rsyslogd being not woken up by a packet coming in the af_unix socket.

I hope that helps

  -- Daniel


--
 <http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/