[PATCH v2 1/9] net: stmmac: support max-speed device tree property

[srinivas.kandagatla]

From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>

This patch adds support to "max-speed" property which is a standard
Ethernet device tree property. max-speed specifies maximum speed
(specified in megabits per second) supported the device.

Depending on the clocking schemes some of the boards can only support
few link speeds, so having a way to limit the link speed in the mac
driver would allow such setups to work reliably.

Without this patch there is no way to tell the driver to limit the
link speed.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |    4 +++-
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |    4 ++++
 include/linux/stmmac.h                             |    1 +
 3 files changed, 8 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ecdc8ab..15192c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -776,6 +776,7 @@ static int stmmac_init_phy(struct net_device *dev)
 	char phy_id_fmt[MII_BUS_ID_SIZE + 3];
 	char bus_id[MII_BUS_ID_SIZE];
 	int interface = priv->plat->interface;
+	int max_speed = priv->plat->max_speed;
 	priv->oldlink = 0;
 	priv->speed = 0;
 	priv->oldduplex = -1;
@@ -800,7 +801,8 @@ static int stmmac_init_phy(struct net_device *dev)
 
 	/* Stop Advertising 1000BASE Capability if interface is not GMII */
 	if ((interface == PHY_INTERFACE_MODE_MII) ||
-	    (interface == PHY_INTERFACE_MODE_RMII))
+	    (interface == PHY_INTERFACE_MODE_RMII) ||
+		(max_speed < 1000 &&  max_speed > 0))
 		phydev->advertising &= ~(SUPPORTED_1000baseT_Half |
 					 SUPPORTED_1000baseT_Full);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 38bd1f4..9377ee6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -42,6 +42,10 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
 	*mac = of_get_mac_address(np);
 	plat->interface = of_get_phy_mode(np);
 
+	/* Get max speed of operation from device tree */
+	if (of_property_read_u32(np, "max-speed", &plat->max_speed))
+		plat->max_speed = -1;
+
 	plat->bus_id = of_alias_get_id(np, "ethernet");
 	if (plat->bus_id < 0)
 		plat->bus_id = 0;
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index bb5deb0..33ace71 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -110,6 +110,7 @@ struct plat_stmmacenet_data {
 	int force_sf_dma_mode;
 	int force_thresh_dma_mode;
 	int riwt_off;
+	int max_speed;
 	void (*fix_mac_speed)(void *priv, unsigned int speed);
 	void (*bus_setup)(void __iomem *ioaddr);
 	int (*init)(struct platform_device *pdev);
-- 
1.7.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/