[PATCH v2 0/2] Qualcomm Universal Peripheral (QUP) I2C controller

[Bjorn Andersson]

Picking up Ivans i2c-qup submission from a few months back, as I've now
tested and corrected some minor things. I also introduced changes based
on the review of v1.

Changes from v1:
 - Cleaned up device tree binding example.
 - Refrased device tree bindings.
 - Following changes in the i2c framework.
 - Use the core clock to calculate divider for the bus clock, instead of
   explicitly setting it.
 - Remove explicit pinctrl settting.
 - Split/renamed qup_i2c_enable(bool) into enable/disable functions.
 - Return value was overwritten on error in write_one/read_one.
 - Initialize the i2c core every time, so that we actually can execute
   more than 1 transmission per xfer.

Ivan T. Ivanov (2):
  i2c: qup: Add device tree bindings information
  i2c: New bus driver for the QUP I2C controller

 .../devicetree/bindings/i2c/qcom,i2c-qup.txt       |  41 +
 drivers/i2c/busses/Kconfig                         |  10 +
 drivers/i2c/busses/Makefile                        |   1 +
 drivers/i2c/busses/i2c-qup.c                       | 897 +++++++++++++++++++++
 4 files changed, 949 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
 create mode 100644 drivers/i2c/busses/i2c-qup.c

-- 
1.8.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/