Re: Terrible performance of sequential O_DIRECT 4k writes in SANenvironment. ~3 times slower then Solars 10 with the same HBA/Storage.

[Sergey Meirovich]

Hi Jan,

On 10 January 2014 11:36, Jan Kara <jack@xxxxxxx> wrote:
> On Thu 09-01-14 12:11:16, Sergey Meirovich wrote:
...
>> I've done preallocation on fnic/XtremIO as Christoph suggested.
>>
>> [root@dca-poc-gtsxdb3 mnt]# sysbench --max-requests=0
>> --file-extra-flags=direct  --test=fileio --num-threads=4
>> --file-total-size=10G --file-io-mode=async --file-async-backlog=1024
>> --file-rw-ratio=1 --file-fsync-freq=0 --max-requests=0
>> --file-test-mode=seqwr --max-time=100 --file-block-size=4K prepare
>> sysbench 0.4.12:  multi-threaded system evaluation benchmark
>>
>> 128 files, 81920Kb each, 10240Mb total
>> Creating files for the test...
>> [root@dca-poc-gtsxdb3 mnt]# du -k test_file.* | awk '{print $1}' |sort |uniq
>> 81920
>> [root@dca-poc-gtsxdb3 mnt]# fallocate -l 81920k test_file.*
>>
>>              Results: 13.042Mb/sec 3338.73 Requests/sec
>>
>> Probably sysbench is still triggering append DIO scenario. Will say
>> simple wrapper over io_submit() against already preallocated (and even
>> filled with data) file provide much better throughput if your theory
>> is valid?
>   So I was experimenting a bit. "sysbench prepare" seems to always do
> synchronous IO from a single thread in the 'prepare' phase regardless of
> the arguments. So there the reported throughput isn't really relevant.
>
> In the 'run' phase it obeys the arguments and indeed when I run fallocate
> to preallocate files during 'run' phase, it significantly helps the
> throughput (from 20 MB/s to 55 MB/s on my SATA drive).

Sorry, Jan. Seems that I presented my findings in a previous mail in
ambiguous style . I know that prepare phase of sysbench is
synchronous/probably buffered (because I saw 512k chunks sent down to
HBA)? IO. I played with blocktrace and have seen that myself during
prepare:

[root@dca-poc-gtsxdb3 mnt]# sysbench --max-requests=0
--file-extra-flags=direct  --test=fileio --num-threads=4
--file-total-size=10G --file-io-mode=async --file-async-backlog=1024
--file-rw-ratio=1 --file-fsync-freq=0 --max-requests=0
--file-test-mode=seqwr --max-time=100 --file-block-size=4K prepare
...

Leads to:

[root@dca-poc-gtsxdb3 mnt]# blktrace -d /dev/sdg -o - | blkparse -i -
| grep 'D  W'
  8,96  14      604    53.129805520 28114  D  WS 1116160 + 1024 [sysbench]
  8,96  14      607    53.129843345 28114  D  WS 1120256 + 1024 [sysbench]
  8,96  14      610    53.129873782 28114  D  WS 1124352 + 1024 [sysbench]
  8,96  14      613    53.129903703 28114  D  WS 1128448 + 1024 [sysbench]
  8,96  14      616    53.130957213 28114  D  WS 1132544 + 1024 [sysbench]
  8,96  14      619    53.130988835 28114  D  WS 1136640 + 1024 [sysbench]
  8,96  14      622    53.131018854 28114  D  WS 1140736 + 1024 [sysbench]
...

That result  "13.042Mb/sec 3338.73 Requests/sec" was from run phase
and before it fallocate had been made.

blktrace from run phase looks very different. 4k as expected.
[root@dca-poc-gtsxdb3 ~]# blktrace -d /dev/sdg -o - | blkparse -i -  |
grep 'D  W'
  8,96   5        3     0.000001874 28212  D  WS 1847296 + 8 [sysbench]
  8,96   5        7     0.001213728 28212  D  WS 1847304 + 8 [sysbench]
  8,96   5       11     0.002779304 28212  D  WS 1847312 + 8 [sysbench]
  8,96   5       15     0.004486445 28212  D  WS 1847320 + 8 [sysbench]
  8,96   5       19     0.006012133 28212  D  WS 22691864 + 8 [sysbench]
  8,96   5       23     0.007781553 28212  D  WS 22691896 + 8 [sysbench]
  8,96   5       27     0.009043404 28212  D  WS 22691928 + 8 [sysbench]
  8,96   5       31     0.010546829 28212  D  WS 22691960 + 8 [sysbench]
  8,96   5       35     0.012214468 28212  D  WS 22691992 + 8 [sysbench]
  8,96   5       39     0.013792616 28212  D  WS 22692024 + 8 [sysbench]
...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/