[PATCH 4/6] usb: gadget: gr_udc: Use of_property_read_u32_index to access arrays

[Andreas Larsson]

Use an appropriate accessor function for property arrays to make the code nicer
and make the code correct if it would ever run on little endian architectures.
Suggested by Mark Rutland.

Signed-off-by: Andreas Larsson <andreas@xxxxxxxxxxx>
---
 drivers/usb/gadget/gr_udc.c |   12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c
index e471db3..8df35fc 100644
--- a/drivers/usb/gadget/gr_udc.c
+++ b/drivers/usb/gadget/gr_udc.c
@@ -2026,9 +2026,7 @@ static int gr_udc_init(struct gr_udc *dev)
 	u32 dmactrl_val;
 	int i;
 	int ret = 0;
-	u32 *bufsizes;
 	u32 bufsize;
-	int len;
 
 	gr_set_address(dev, 0);
 
@@ -2039,19 +2037,17 @@ static int gr_udc_init(struct gr_udc *dev)
 	INIT_LIST_HEAD(&dev->ep_list);
 	gr_set_ep0state(dev, GR_EP0_DISCONNECT);
 
-	bufsizes = (u32 *)of_get_property(np, "epobufsizes", &len);
-	len /= sizeof(u32);
 	for (i = 0; i < dev->nepo; i++) {
-		bufsize = (bufsizes && i < len) ? bufsizes[i] : 1024;
+		if (of_property_read_u32_index(np, "epobufsizes", i, &bufsize))
+			bufsize = 1024;
 		ret = gr_ep_init(dev, i, 0, bufsize);
 		if (ret)
 			return ret;
 	}
 
-	bufsizes = (u32 *)of_get_property(np, "epibufsizes", &len);
-	len /= sizeof(u32);
 	for (i = 0; i < dev->nepi; i++) {
-		bufsize = (bufsizes && i < len) ? bufsizes[i] : 1024;
+		if (of_property_read_u32_index(np, "epibufsizes", i, &bufsize))
+			bufsize = 1024;
 		ret = gr_ep_init(dev, i, 1, bufsize);
 		if (ret)
 			return ret;
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/