On Wednesday 08 January 2014, Boris BREZILLON wrote:--- /dev/nullOne small request: Can we try to avoid the "NFC" name here? I think it's
+++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt
@@ -0,0 +1,71 @@
+Allwinner NAND Flash Controller (NFC)
+
+Required properties:
+- compatible : "allwinner,sun4i-nfc".
+- reg : shall contain registers location and length for data and reg.
+- interrupts : shall define the NFC interrupt.
+- #address-cells: shall be set to 1. Encode the nand CS.
+- #size-cells : shall be set to 0.
+- clocks : shall reference NFC clocks.
+- clock-names : NFC internal clock names. Shall contain :
+ * "ahb_clk" : AHB gating clock
+ * "sclk" : NFC clock
+
too overloaded and people may confuse it with near-field communication,
which I'm sure will be supported in sunxi based devices at some point.
It doesn't hurt to also mention that the function block is called
nfc, but I think references to it are better named "nand", which is
less confusing.
Arnd