[PATCH v3 3/3] ata: ahci_platform: runtime resume the device before use

[Roger Quadros]

On OMAP platforms the device needs to be runtime resumed before
it can be accessed. The OMAP HWMOD framework takes care of
enabling the module and its resources based on the
device's runtime PM state.

In this patch we runtime resume during .probe() and runtime suspend
during .remove() (i.e. ahci_host_stop()).

We also update the runtime PM state during .resume().

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Signed-off-by: Balaji T K <balajitk@xxxxxx>
---
 drivers/ata/ahci_platform.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index f61093b..04c4ac2 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/libata.h>
 #include <linux/ahci_platform.h>
+#include <linux/pm_runtime.h>
 #include "ahci.h"
 
 static void ahci_host_stop(struct ata_host *host);
@@ -142,6 +143,9 @@ static int ahci_probe(struct platform_device *pdev)
 		}
 	}
 
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
 	hpriv->phy = devm_phy_get(dev, "sata-phy");
 	if (IS_ERR(hpriv->phy)) {
 		dev_dbg(dev, "can't get sata-phy\n");
@@ -269,6 +273,9 @@ static void ahci_host_stop(struct ata_host *host)
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
+
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -340,6 +347,11 @@ static int ahci_resume(struct device *dev)
 
 	ata_host_resume(host);
 
+	/* We resumed so update PM runtime state */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
 	return 0;
 
 disable_unprepare_clk:
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/