[PATCH] Power: ab8500: Fixed coding style issues
From: Jesper Falk
Date: Sun Jan 05 2014 - 19:50:34 EST
Fixed coding style.
Signed-off-by: Jesper Falk <jesperfalk94@xxxxxxxxx>
---
drivers/power/ab8500_bmdata.c | 114 ++++++++++++++++++++---------------------
drivers/power/ab8500_btemp.c | 8 ++-
drivers/power/ab8500_charger.c | 10 ++--
drivers/power/ab8500_fg.c | 38 +++++++++-----
4 files changed, 88 insertions(+), 82 deletions(-)
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
index d298645..570c87e 100644
--- a/drivers/power/ab8500_bmdata.c
+++ b/drivers/power/ab8500_bmdata.c
@@ -430,10 +430,10 @@ static const struct abx500_maxim_parameters ab8500_maxi_params = {
};
static const struct abx500_maxim_parameters abx540_maxi_params = {
- .ena_maxi = true,
- .chg_curr = 3000,
- .wait_cycles = 10,
- .charger_curr_step = 200,
+ .ena_maxi = true,
+ .chg_curr = 3000,
+ .wait_cycles = 10,
+ .charger_curr_step = 200,
};
static const struct abx500_bm_charger_parameters chg = {
@@ -448,19 +448,19 @@ static const struct abx500_bm_charger_parameters chg = {
* AB8500 values
*/
static int ab8500_charge_output_curr_map[] = {
- 100, 200, 300, 400, 500, 600, 700, 800,
- 900, 1000, 1100, 1200, 1300, 1400, 1500, 1500,
+ 100, 200, 300, 400, 500, 600, 700, 800,
+ 900, 1000, 1100, 1200, 1300, 1400, 1500, 1500,
};
static int ab8540_charge_output_curr_map[] = {
- 0, 0, 0, 75, 100, 125, 150, 175,
- 200, 225, 250, 275, 300, 325, 350, 375,
- 400, 425, 450, 475, 500, 525, 550, 575,
- 600, 625, 650, 675, 700, 725, 750, 775,
- 800, 825, 850, 875, 900, 925, 950, 975,
- 1000, 1025, 1050, 1075, 1100, 1125, 1150, 1175,
- 1200, 1225, 1250, 1275, 1300, 1325, 1350, 1375,
- 1400, 1425, 1450, 1500, 1600, 1700, 1900, 2000,
+ 0, 0, 0, 75, 100, 125, 150, 175,
+ 200, 225, 250, 275, 300, 325, 350, 375,
+ 400, 425, 450, 475, 500, 525, 550, 575,
+ 600, 625, 650, 675, 700, 725, 750, 775,
+ 800, 825, 850, 875, 900, 925, 950, 975,
+ 1000, 1025, 1050, 1075, 1100, 1125, 1150, 1175,
+ 1200, 1225, 1250, 1275, 1300, 1325, 1350, 1375,
+ 1400, 1425, 1450, 1500, 1600, 1700, 1900, 2000,
};
/*
@@ -468,19 +468,19 @@ static int ab8540_charge_output_curr_map[] = {
* AB8500 values
*/
static int ab8500_charge_input_curr_map[] = {
- 50, 98, 193, 290, 380, 450, 500, 600,
- 700, 800, 900, 1000, 1100, 1300, 1400, 1500,
+ 50, 98, 193, 290, 380, 450, 500, 600,
+ 700, 800, 900, 1000, 1100, 1300, 1400, 1500,
};
static int ab8540_charge_input_curr_map[] = {
- 25, 50, 75, 100, 125, 150, 175, 200,
- 225, 250, 275, 300, 325, 350, 375, 400,
- 425, 450, 475, 500, 525, 550, 575, 600,
- 625, 650, 675, 700, 725, 750, 775, 800,
- 825, 850, 875, 900, 925, 950, 975, 1000,
- 1025, 1050, 1075, 1100, 1125, 1150, 1175, 1200,
- 1225, 1250, 1275, 1300, 1325, 1350, 1375, 1400,
- 1425, 1450, 1475, 1500, 1500, 1500, 1500, 1500,
+ 25, 50, 75, 100, 125, 150, 175, 200,
+ 225, 250, 275, 300, 325, 350, 375, 400,
+ 425, 450, 475, 500, 525, 550, 575, 600,
+ 625, 650, 675, 700, 725, 750, 775, 800,
+ 825, 850, 875, 900, 925, 950, 975, 1000,
+ 1025, 1050, 1075, 1100, 1125, 1150, 1175, 1200,
+ 1225, 1250, 1275, 1300, 1325, 1350, 1375, 1400,
+ 1425, 1450, 1475, 1500, 1500, 1500, 1500, 1500,
};
struct abx500_bm_data ab8500_bm_data = {
@@ -513,42 +513,42 @@ struct abx500_bm_data ab8500_bm_data = {
.maxi = &ab8500_maxi_params,
.chg_params = &chg,
.fg_params = &fg,
- .chg_input_curr = ab8500_charge_input_curr_map,
- .n_chg_in_curr = ARRAY_SIZE(ab8500_charge_input_curr_map),
+ .chg_input_curr = ab8500_charge_input_curr_map,
+ .n_chg_in_curr = ARRAY_SIZE(ab8500_charge_input_curr_map),
};
struct abx500_bm_data ab8540_bm_data = {
- .temp_under = 3,
- .temp_low = 8,
- .temp_high = 43,
- .temp_over = 48,
- .main_safety_tmr_h = 4,
- .temp_interval_chg = 20,
- .temp_interval_nochg = 120,
- .usb_safety_tmr_h = 4,
- .bkup_bat_v = BUP_VCH_SEL_2P6V,
- .bkup_bat_i = BUP_ICH_SEL_150UA,
- .no_maintenance = false,
- .capacity_scaling = false,
- .adc_therm = ABx500_ADC_THERM_BATCTRL,
- .chg_unknown_bat = false,
- .enable_overshoot = false,
- .fg_res = 100,
- .cap_levels = &cap_levels,
- .bat_type = bat_type_thermistor,
- .n_btypes = ARRAY_SIZE(bat_type_thermistor),
- .batt_id = 0,
- .interval_charging = 5,
- .interval_not_charging = 120,
- .temp_hysteresis = 3,
- .gnd_lift_resistance = 0,
- .maxi = &abx540_maxi_params,
- .chg_params = &chg,
- .fg_params = &fg,
- .chg_output_curr = ab8540_charge_output_curr_map,
- .n_chg_out_curr = ARRAY_SIZE(ab8540_charge_output_curr_map),
- .chg_input_curr = ab8540_charge_input_curr_map,
- .n_chg_in_curr = ARRAY_SIZE(ab8540_charge_input_curr_map),
+ .temp_under = 3,
+ .temp_low = 8,
+ .temp_high = 43,
+ .temp_over = 48,
+ .main_safety_tmr_h = 4,
+ .temp_interval_chg = 20,
+ .temp_interval_nochg = 120,
+ .usb_safety_tmr_h = 4,
+ .bkup_bat_v = BUP_VCH_SEL_2P6V,
+ .bkup_bat_i = BUP_ICH_SEL_150UA,
+ .no_maintenance = false,
+ .capacity_scaling = false,
+ .adc_therm = ABx500_ADC_THERM_BATCTRL,
+ .chg_unknown_bat = false,
+ .enable_overshoot = false,
+ .fg_res = 100,
+ .cap_levels = &cap_levels,
+ .bat_type = bat_type_thermistor,
+ .n_btypes = ARRAY_SIZE(bat_type_thermistor),
+ .batt_id = 0,
+ .interval_charging = 5,
+ .interval_not_charging = 120,
+ .temp_hysteresis = 3,
+ .gnd_lift_resistance = 0,
+ .maxi = &abx540_maxi_params,
+ .chg_params = &chg,
+ .fg_params = &fg,
+ .chg_output_curr = ab8540_charge_output_curr_map,
+ .n_chg_out_curr = ARRAY_SIZE(ab8540_charge_output_curr_map),
+ .chg_input_curr = ab8540_charge_input_curr_map,
+ .n_chg_in_curr = ARRAY_SIZE(ab8540_charge_input_curr_map),
};
int ab8500_bm_of_probe(struct device *dev,
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 7f9a454..6ef7d92 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -84,7 +84,7 @@ struct ab8500_btemp_ranges {
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
* @fg: Pointer to the struct fg
- * @bm: Platform specific battery management information
+ * @bm: Platform specific battery management information
* @btemp_psy: Structure for BTEMP specific battery properties
* @events: Structure for information about events triggered
* @btemp_ranges: Battery temperature range structure
@@ -946,9 +946,8 @@ static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data)
switch (ext->type) {
case POWER_SUPPLY_TYPE_MAINS:
/* AC disconnected */
- if (!ret.intval && di->events.ac_conn) {
+ if (!ret.intval && di->events.ac_conn)
di->events.ac_conn = false;
- }
/* AC connected */
else if (ret.intval && !di->events.ac_conn) {
di->events.ac_conn = true;
@@ -958,9 +957,8 @@ static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data)
break;
case POWER_SUPPLY_TYPE_USB:
/* USB disconnected */
- if (!ret.intval && di->events.usb_conn) {
+ if (!ret.intval && di->events.usb_conn)
di->events.usb_conn = false;
- }
/* USB connected */
else if (ret.intval && !di->events.usb_conn) {
di->events.usb_conn = true;
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 19110aa..481e304 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -236,7 +236,7 @@ struct ab8500_charger_max_usb_in_curr {
* Counter for current stepping sessions
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @bm: Platform specific battery management information
+ * @bm: Platform specific battery management information
* @flags: Structure for information about events triggered
* @usb_state: Structure for usb stack information
* @max_usb_in_curr: Max USB charger input current
@@ -385,17 +385,15 @@ static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
/* write back the changed fallback bit value to register */
ret = abx500_set_register_interruptible(di->dev, bank, reg, val);
- if (ret) {
+ if (ret)
dev_err(di->dev, "%d write failed\n", __LINE__);
- }
disable_otp:
if (is_ab8500(di->parent)) {
/* disable the set OTP registers again */
ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
- if (ret) {
+ if (ret)
dev_err(di->dev, "%d write failed\n", __LINE__);
- }
}
}
@@ -2397,7 +2395,7 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work)
return;
}
- dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__);
+ dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__);
di->vbus_detected = true;
ret = ab8500_charger_read_usb_type(di);
if (ret) {
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index 3cb4178..13d6903 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -185,7 +185,7 @@ struct inst_curr_result_list {
* @avg_cap: Average capacity filter
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @bm: Platform specific battery management information
+ * @bm: Platform specific battery management information
* @fg_psy: Structure that holds the FG specific battery properties
* @fg_wq: Work queue for running the FG algorithm
* @fg_periodic_work: Work to run the FG algorithm periodically
@@ -821,7 +821,8 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work)
queue_work(di->fg_wq, &di->fg_work);
dev_dbg(di->dev, "fg_res: %d, fg_samples: %d, gasg: %d, accu_charge: %d\n",
- di->bm->fg_res, di->fg_samples, val, di->accu_charge);
+ di->bm->fg_res, di->fg_samples, val,
+ di->accu_charge);
return;
exit:
dev_err(di->dev,
@@ -1884,9 +1885,9 @@ static void ab8500_fg_low_bat_work(struct work_struct *work)
dev_warn(di->dev, "Shut down pending...\n");
} else {
/*
- * Else we need to re-schedule this check to be able to detect
- * if the voltage increases again during charging or
- * due to decreasing load.
+ * Else we need to re-schedule this check to be able to
+ * detect if the voltage increases again during charging
+ * or due to decreasing load.
*/
di->low_bat_cnt--;
dev_warn(di->dev, "Battery voltage still LOW\n");
@@ -2735,7 +2736,8 @@ static ssize_t ab8505_powercut_restart_write(struct device *dev,
}
ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
- AB8505_RTC_PCUT_RESTART_REG, (u8)reg_value);
+ AB8505_RTC_PCUT_RESTART_REG,
+ (u8)reg_value);
if (ret < 0)
dev_err(dev, "Failed to set AB8505_RTC_PCUT_RESTART_REG\n");
@@ -2757,7 +2759,8 @@ static ssize_t ab8505_powercut_timer_read(struct device *dev,
di = to_ab8500_fg_device_info(psy);
ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
- AB8505_RTC_PCUT_TIME_REG, ®_value);
+ AB8505_RTC_PCUT_TIME_REG,
+ ®_value);
if (ret < 0) {
dev_err(dev, "Failed to read AB8505_RTC_PCUT_TIME_REG\n");
@@ -2782,7 +2785,8 @@ static ssize_t ab8505_powercut_restart_counter_read(struct device *dev,
di = to_ab8500_fg_device_info(psy);
ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
- AB8505_RTC_PCUT_RESTART_REG, ®_value);
+ AB8505_RTC_PCUT_RESTART_REG,
+ ®_value);
if (ret < 0) {
dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
@@ -2807,7 +2811,8 @@ static ssize_t ab8505_powercut_read(struct device *dev,
di = to_ab8500_fg_device_info(psy);
ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
- AB8505_RTC_PCUT_CTL_STATUS_REG, ®_value);
+ AB8505_RTC_PCUT_CTL_STATUS_REG,
+ ®_value);
if (ret < 0)
goto fail;
@@ -2836,7 +2841,8 @@ static ssize_t ab8505_powercut_write(struct device *dev,
}
ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
- AB8505_RTC_PCUT_CTL_STATUS_REG, (u8)reg_value);
+ AB8505_RTC_PCUT_CTL_STATUS_REG,
+ (u8)reg_value);
if (ret < 0)
dev_err(dev, "Failed to set AB8505_RTC_PCUT_CTL_STATUS_REG\n");
@@ -2858,7 +2864,8 @@ static ssize_t ab8505_powercut_flag_read(struct device *dev,
di = to_ab8500_fg_device_info(psy);
ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
- AB8505_RTC_PCUT_CTL_STATUS_REG, ®_value);
+ AB8505_RTC_PCUT_CTL_STATUS_REG,
+ ®_value);
if (ret < 0) {
dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
@@ -2883,7 +2890,8 @@ static ssize_t ab8505_powercut_debounce_read(struct device *dev,
di = to_ab8500_fg_device_info(psy);
ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
- AB8505_RTC_PCUT_DEBOUNCE_REG, ®_value);
+ AB8505_RTC_PCUT_DEBOUNCE_REG,
+ ®_value);
if (ret < 0) {
dev_err(dev, "Failed to read AB8505_RTC_PCUT_DEBOUNCE_REG\n");
@@ -2914,7 +2922,8 @@ static ssize_t ab8505_powercut_debounce_write(struct device *dev,
}
ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
- AB8505_RTC_PCUT_DEBOUNCE_REG, (u8)reg_value);
+ AB8505_RTC_PCUT_DEBOUNCE_REG,
+ (u8)reg_value);
if (ret < 0)
dev_err(dev, "Failed to set AB8505_RTC_PCUT_DEBOUNCE_REG\n");
@@ -2935,7 +2944,8 @@ static ssize_t ab8505_powercut_enable_status_read(struct device *dev,
di = to_ab8500_fg_device_info(psy);
ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
- AB8505_RTC_PCUT_CTL_STATUS_REG, ®_value);
+ AB8505_RTC_PCUT_CTL_STATUS_REG,
+ ®_value);
if (ret < 0) {
dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
--
1.8.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/