[PATCH v3 02/03] ARM: shmobile: Remove CMT, TMU and STI Kconfig entries

[Magnus Damm]

From: Magnus Damm <damm@xxxxxxxxxxxxx>

Now when drivers/clocksource/Kconfig has been
updated with entires for CMT, TMU and STI
it is safe to remove these from mach-shmobile.

Also select timers per SoC via SYS_SUPPORTS_xxx.

Signed-off-by: Magnus Damm <damm@xxxxxxxxxxxxx>
---

 arch/arm/mach-shmobile/Kconfig |   35 +++++++++++++++++------------------
 1 file changed, 17 insertions(+), 18 deletions(-)

--- 0001/arch/arm/mach-shmobile/Kconfig
+++ work/arch/arm/mach-shmobile/Kconfig	2013-12-04 22:04:05.000000000 +0900
@@ -23,13 +23,16 @@ comment "SH-Mobile System Type"
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
+	select SYS_SUPPORTS_STI
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
+	select SYS_SUPPORTS_MTU2
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_CMT
 
 comment "SH-Mobile Board Type"
 
@@ -59,6 +62,8 @@ config ARCH_SH7372
 	select ARM_CPU_SUSPEND if PM || CPU_IDLE
 	select CPU_V7
 	select SH_CLK_CPG
+	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_TMU
 
 config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
@@ -68,6 +73,8 @@ config ARCH_SH73A0
 	select I2C
 	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_TMU
 
 config ARCH_R8A73A4
 	bool "R-Mobile APE6 (R8A73A40)"
@@ -78,6 +85,8 @@ config ARCH_R8A73A4
 	select RENESAS_IRQC
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
+	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_TMU
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
@@ -86,6 +95,8 @@ config ARCH_R8A7740
 	select CPU_V7
 	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_TMU
 
 config ARCH_R8A7778
 	bool "R-Car M1A (R8A77781)"
@@ -95,6 +106,7 @@ config ARCH_R8A7778
 	select ARM_GIC
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
+	select SYS_SUPPORTS_TMU
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
@@ -105,6 +117,7 @@ config ARCH_R8A7779
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_TMU
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
@@ -113,6 +126,7 @@ config ARCH_R8A7790
 	select CPU_V7
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_CMT
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
@@ -121,6 +135,7 @@ config ARCH_R8A7791
 	select CPU_V7
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_CMT
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
@@ -128,6 +143,7 @@ config ARCH_EMEV2
 	select ARM_GIC
 	select CPU_V7
 	select USE_OF
+	select SYS_SUPPORTS_STI
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
@@ -135,6 +151,7 @@ config ARCH_R7S72100
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
+	select SYS_SUPPORTS_MTU2
 
 comment "SH-Mobile Board Type"
 
@@ -329,24 +346,6 @@ config SHMOBILE_TIMER_HZ
 	  to select a HZ value such as 128 that can evenly divide RCLK.
 	  A HZ value that does not divide evenly may cause timer drift.
 
-config SH_TIMER_CMT
-	bool "CMT timer driver"
-	default y
-	help
-	  This enables build of the CMT timer driver.
-
-config SH_TIMER_TMU
-	bool "TMU timer driver"
-	default y
-	help
-	  This enables build of the TMU timer driver.
-
-config EM_TIMER_STI
-	bool "STI timer driver"
-	default y
-	help
-	  This enables build of the STI timer driver.
-
 endmenu
 
 endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/