Re: [PATCH 1/9] ARM: at91/dt: add rm9200 spi0 chip select pins definitions

From: boris brezillon
Date: Wed Nov 20 2013 - 11:00:30 EST


On 20/11/2013 15:56, Jean-Christophe PLAGNIOL-VILLARD wrote:
On 13:02 Wed 28 Aug , Boris BREZILLON wrote:
Add spi0 cs pinctrl pins definitions.

Signed-off-by: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
---
arch/arm/boot/dts/at91rm9200.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index f770655..69b76c7 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -486,6 +486,26 @@
AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA1 periph A SPI0_MOSI pin */
AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A SPI0_SPCK pin */
};
+
+ pinctrl_spi0_cs0: spi0_cs0-0 {
+ atmel,pins =
+ <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A SPI0_NPCS0 pin */
+ };
+
+ pinctrl_spi0_cs1: spi0_cs1-0 {
+ atmel,pins =
+ <AT91_PIOA 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA4 GPIO SPI0_NPCS1 pin */
+ };
+
+ pinctrl_spi0_cs2: spi0_cs2-0 {
+ atmel,pins =
+ <AT91_PIOA 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA5 GPIO SPI0_NPCS2 pin */
+ };
+
+ pinctrl_spi0_cs3: spi0_cs3-0 {
+ atmel,pins =
+ <AT91_PIOA 6 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA6 GPIO SPI0_NPCS3 pin */
+ };
nack the pin are not multidrive there is only one master
Right, this is a mistake.

But the pins should be configured as OUTPUT with HIGH level
(see http://lxr.free-electrons.com/source/arch/arm/mach-at91/at91rm9200_devices.c#L589).


Best Regards,
J.
};
pioA: gpio@fffff400 {
--
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/