Re: [PATCH 2/2] s390/mm,tlb: race of lazy TLB flush vs. recreationof TLB entries

[Martin Schwidefsky]

On Fri, 15 Nov 2013 11:57:01 +0000
Catalin Marinas <catalin.marinas@xxxxxxx> wrote:

> On Fri, Nov 15, 2013 at 11:17:36AM +0000, Martin Schwidefsky wrote:
> > On Fri, 15 Nov 2013 12:10:00 +0100
> > Martin Schwidefsky <schwidefsky@xxxxxxxxxx> wrote:
> > 
> > > On Fri, 15 Nov 2013 10:44:37 +0000
> > > Catalin Marinas <catalin.marinas@xxxxxxx> wrote:
> > > > 1. thread-A running with mm-A
> > > > 2. context_switch() to thread-B1 causing a switch_mm(mm-B)
> > > > 3. switch_mm(mm-B) sets thread-B1's TIF_TLB_WAIT but does _not_ call
> > > >    update_mm(mm-B). Hardware still using mm-A
> > > > 4. scheduler unlocks and is about to call finish_mm_switch(mm-B)
> > > > 5. interrupt and preemption before finish_mm_switch(mm-B)
> > > > 6. context_switch() to thread-B2 causing a switch_mm(mm-B) (note here
> > > >    that thread-B1 and thread-B2 have the same mm-B)
> > > > 7. switch_mm() as in this patch exits early because prev == next
> > > > 8. finish_mm_switch(mm-B) is indeed called but TIF_TLB_WAIT is not set
> > > >    for thread-B2, therefore no call to update_mm(mm-B)
> > > > 
> > > > So after point 8, you get thread-B2 running (and possibly returning to
> > > > user space) with mm-A. Do you see a problem here?
> > > 
> > > Oh, now I get it. Thanks for the patience, this is indeed a problem.
> > > And I concur, a per-mm flag is the 'obvious' solution.
> > 
> > Having said that and looking at the code I find this to be not as obvious
> > any more. If you have multiple cpus using a per-mm flag can get you into
> > trouble:
> > 
> > 1. cpu #1 calls switch_mm and finds that irqs are disabled.
> >    mm->context.switch_pending is set
> > 2. cpu #2 calls switch_mm for the same mm and finds that irqs are disabled.
> >    mm->context.switch_pending is set again
> > 3. cpu #1 reaches finish_arch_post_lock_switch and finds switch_pending == 1
> > 4. cpu #1 zeroes mm->switch_pending and calls cpu_switch_mm
> > 5. cpu #2 reaches finish_arch_post_lock_switch and finds switch_pending == 0
> > 6. cpu #2 continues with the old mm
> > 
> > This is a race, no?
> 
> Yes, but we only use this on ARMv5 and earlier and there is no SMP
> support.
> 
> On arm64 however, I need to fix that and you made a good point. In my
> (not yet public) patch, the switch_pending is cleared after all the
> IPIs have been acknowledged but it needs some more thinking. A solution
> could be to always do the cpu_switch_mm() in finish_mm_switch() without
> any checks but this requires that any switch_mm() call from the kernel
> needs to be paired with finish_mm_switch(). So your first patch comes in
> handy (but I still need to figure out a quick arm64 fix for cc stable).
 
I am currently thinking about the following solution for s390: keep the
TIF_TLB_FLUSH bit per task but do a preempt_disable() in switch_mm()
if the switch is incomplete. This pairs with a preempt_enable() in
finish_switch_mm() after the update_mm has been done.

-- 
blue skies,
   Martin.

"Reality continues to ruin my life." - Calvin.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/