[PATCH v2 7/7] extcon: arizona: Improve headphone detection error handling
From: Charles Keepax
Date: Thu Nov 14 2013 - 09:27:36 EST
In several places the return value of regmap operations is not checked
whilst handling headphone detection. This patch adds checks for these
return values. Additionally, failing to read/write a register is a
serious enough error we should abort the headphone detection process so
correct a couple of cases where this was not the case.
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
drivers/extcon/extcon-arizona.c | 82 ++++++++++++++++++++++++++++----------
1 files changed, 60 insertions(+), 22 deletions(-)
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index d71a738..321dcc9 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -399,22 +399,32 @@ static int arizona_hpdet_read_ip1(struct arizona_extcon_info *info)
ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read HP value: %d\n", ret);
- return -EAGAIN;
+ return ret;
}
- regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, &range);
+ ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, &range);
range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to read HP range: %d\n", ret);
+ return ret;
+ }
if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
(val < 100 || val >= 0x3fb)) {
range++;
dev_dbg(arizona->dev, "Moving to HPDET range %d\n", range);
- regmap_update_bits(arizona->regmap,
- ARIZONA_HEADPHONE_DETECT_1,
- ARIZONA_HP_IMPEDANCE_RANGE_MASK,
- range <<
- ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
+ ret = regmap_update_bits(arizona->regmap,
+ ARIZONA_HEADPHONE_DETECT_1,
+ ARIZONA_HP_IMPEDANCE_RANGE_MASK,
+ range <<
+ ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to move range (%d): %d\n",
+ range, ret);
+ return ret;
+ }
return -EAGAIN;
}
@@ -454,7 +464,11 @@ static int arizona_hpdet_read_ip2(struct arizona_extcon_info *info)
/* Convert to ohms, the value is in 0.5 ohm increments */
val /= 2;
- regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, &range);
+ ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, &range);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to read HP range: %d\n", ret);
+ return ret;
+ }
range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK)
>> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
@@ -465,11 +479,17 @@ static int arizona_hpdet_read_ip2(struct arizona_extcon_info *info)
dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n",
arizona_hpdet_c_ranges[range].min,
arizona_hpdet_c_ranges[range].max);
- regmap_update_bits(arizona->regmap,
+ ret = regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
ARIZONA_HP_IMPEDANCE_RANGE_MASK,
range <<
ARIZONA_HP_IMPEDANCE_RANGE_SHIFT);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to move range (%d): %d\n",
+ range, ret);
+ return ret;
+ }
return -EAGAIN;
}
@@ -519,6 +539,7 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading,
{
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;
+ int ret;
/*
* If we're using HPDET for accessory identification we need
@@ -531,18 +552,30 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading,
if (id_gpio && info->num_hpdet_res == 1) {
dev_dbg(arizona->dev, "Measuring mic\n");
- regmap_update_bits(arizona->regmap,
- ARIZONA_ACCESSORY_DETECT_MODE_1,
- ARIZONA_ACCDET_MODE_MASK |
- ARIZONA_ACCDET_SRC,
- ARIZONA_ACCDET_MODE_HPR |
- info->micd_modes[0].src);
+ ret = regmap_update_bits(arizona->regmap,
+ ARIZONA_ACCESSORY_DETECT_MODE_1,
+ ARIZONA_ACCDET_MODE_MASK |
+ ARIZONA_ACCDET_SRC,
+ ARIZONA_ACCDET_MODE_HPR |
+ info->micd_modes[0].src);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to change HPDET source: %d\n",
+ ret);
+ return ret;
+ }
gpio_set_value_cansleep(id_gpio, 1);
- regmap_update_bits(arizona->regmap,
- ARIZONA_HEADPHONE_DETECT_1,
- ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+ ret = regmap_update_bits(arizona->regmap,
+ ARIZONA_HEADPHONE_DETECT_1,
+ ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to re-enable HPDET: %d\n",
+ ret);
+ return ret;
+ }
return -EAGAIN;
}
@@ -575,10 +608,15 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading,
}
/* Make sure everything is reset back to the real polarity */
- regmap_update_bits(arizona->regmap,
- ARIZONA_ACCESSORY_DETECT_MODE_1,
- ARIZONA_ACCDET_SRC,
- info->micd_modes[0].src);
+ ret = regmap_update_bits(arizona->regmap,
+ ARIZONA_ACCESSORY_DETECT_MODE_1,
+ ARIZONA_ACCDET_SRC,
+ info->micd_modes[0].src);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to reset polarity: %d\n",
+ ret);
+ return ret;
+ }
}
return 0;
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/