[PATCH 12/12] arm: dts: keystone: add AEMIF/NAND device entry

From: Khoronzhuk, Ivan
Date: Mon Nov 11 2013 - 12:13:52 EST


Add AEMIF/NAND device entry.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
---
arch/arm/boot/dts/keystone.dts | 63 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 63 insertions(+)

diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dts
index 100bdf5..998da98 100644
--- a/arch/arm/boot/dts/keystone.dts
+++ b/arch/arm/boot/dts/keystone.dts
@@ -179,5 +179,68 @@
interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
};
+
+ aemif@021000A00 {
+ compatible = "ti,keystone-aemif";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&clkaemif>;
+ clock-names = "aemif";
+ clock-ranges;
+
+ reg = <0x2100A00 0x00000100>;
+ ranges = <0 0 0x30000000 0x10000000
+ 1 0 0x21000A00 0x00000100>;
+
+ nand:cs0 {
+ compatible = "ti,davinci-cs";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ /* all timings in nanoseconds */
+ ti,davinci-cs-ta = <12>;
+ ti,davinci-cs-rhold = <6>;
+ ti,davinci-cs-rstrobe = <23>;
+ ti,davinci-cs-rsetup = <9>;
+ ti,davinci-cs-whold = <8>;
+ ti,davinci-cs-wstrobe = <23>;
+ ti,davinci-cs-wsetup = <8>;
+
+ nand@0,0 {
+ compatible = "ti,keystone-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x4000000
+ 1 0 0x0000100>;
+
+ ti,davinci-chipselect = <0>;
+ ti,davinci-mask-ale = <0x2000>;
+ ti,davinci-mask-cle = <0x4000>;
+ ti,davinci-mask-chipsel = <0>;
+ nand-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "params";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "ubifs";
+ reg = <0x180000 0x7E80000>;
+ };
+ };
+ };
+ };
};
};
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/