Re: [PATCH] net: mv643xx_eth: Add missing phy_addr_set in DT mode

[Sebastian Hesselbarth]

On 11/05/2013 11:12 PM, Arnaud Ebalard wrote:
> Hi Jason,
>
> Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx> writes:
>
> > Commit cc9d4598 'net: mv643xx_eth: use of_phy_connect if phy_node
> > present' made the call to phy_scan optional, if the DT has a link to
> > the phy node.
> >
> > However phy_scan has the side effect of calling phy_addr_set, which
> > writes the phy MDIO address to the ethernet controller. If phy_addr_set
> > is not called, and the bootloader has not set the correct address then
> > the driver will fail to function.
>
> Thanks *a lot* for fixing this one! I had the issue on my ReadyNAS 102
> (Armada 370 based) which I had put on a todo list and temporarily

Erm, just to make sure: Armada 370 isn't using mv643xx_eth but mvneta,
are you sure it is (was) related to Jason's fix?

Sebastian

> workarounded by including a 'ping whatever' call in my u-boot env in
> order to force it to do the init. Without it, I was unable to properly
> use the interface. With your fix, after multiple reboots to test it,
> everything works as expected. So, FWIW:
>
> Tested-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/