Re: [PATCH v2 7/9] phy: add Broadcom Kona USB2 PHY DT binding

From: Arend van Spriel
Date: Fri Nov 01 2013 - 16:54:36 EST


On 11/01/2013 08:45 PM, Matt Porter wrote:
Add a binding that describes the Broadcom Kona USB2 PHY found
on the BCM281xx family of SoCs.

Signed-off-by: Matt Porter <matt.porter@xxxxxxxxxx>
---
.../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++
1 file changed, 15 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
new file mode 100644
index 0000000..db309e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
@@ -0,0 +1,15 @@
+BROADCOM KONA USB2 PHY
+
+Required properties:
+ - compatible: brcm,kona-usb2-phy
+ - regs: offset and length of the PHY registers
+ - #phy-cells: must be 0
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+
+ usbphy: usbphy@3f130000 {
+ compatible = "brcm,kona-usb2-phy";
+ reg = <0x3f130000 0x28>;

I expect 'regs' iso 'reg' in this example.

Regards,
Arend

+ #phy-cells = <0>;
+ };



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/