Re: [PATCH] PCI: add quirk for 3ware 9650SE controller

From: Jiri Kosina
Date: Wed Oct 30 2013 - 06:27:34 EST

Next message: P J P: "Re: [Patch] Read CONFIG_RD_ variables for initramfs compression"
Previous message: Masami Hiramatsu: "Re: [PATCH v4 2/3] Support for perf to probe into SDT markers:"
Next in thread: Bjorn Helgaas: "Re: [PATCH] PCI: add quirk for 3ware 9650SE controller"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, 27 Sep 2013, Jiri Kosina wrote:

> > It's nice to have a pointer to, e.g., a bugzilla.kernel.org bug report
> > with info such as dmesg logs, lspci output, etc., for future reference.
>
> It's a customer-reported issue, so I am gathering permission to make this
> information public (I don't think that'll be an issue).
>
> I'll send up a followup afterwards.

Attached is dmesg output leading to timeouts (that are cured by my
original patch in this thread) and lspci.

Please let me know if there is anything else I could do, or if you are
going to proceed with my patch adding the quirk.

Thanks,

--
Jiri Kosina
SUSE Labs[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 3.0.58-0.6.6-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Tue Feb 19 11:07:00 UTC 2013 (1576ecd)

[ 0.000000] Command line: root=/dev/disk/by-id/scsi-3600050e0fc071e00f8ea000069410000-part1 resume=/dev/disk/by-id/scsi-3600050e0fc071e00f8ea000069410000-part5 splash=silent crashkernel=256M-:128M showopts console=tty0 console=ttyS0,115200 vga=0x314 scsi_mod.scsi_logging_level=9411

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c800 (usable)

[ 0.000000] BIOS-e820: 000000000009c800 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000009f91a000 (usable)

[ 0.000000] BIOS-e820: 000000009f91a000 - 000000009f9d1000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000009f9d1000 - 000000009fa32000 (usable)

[ 0.000000] BIOS-e820: 000000009fa32000 - 000000009fa9a000 (reserved)

[ 0.000000] BIOS-e820: 000000009fa9a000 - 000000009fab4000 (usable)

[ 0.000000] BIOS-e820: 000000009fab4000 - 000000009fb1a000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000009fb1a000 - 000000009fb26000 (usable)

[ 0.000000] BIOS-e820: 000000009fb26000 - 000000009fb3a000 (ACPI data)

[ 0.000000] BIOS-e820: 000000009fb3a000 - 000000009fc00000 (usable)

[ 0.000000] BIOS-e820: 000000009fc00000 - 00000000b0000000 (reserved)

[ 0.000000] BIOS-e820: 00000000ffe00000 - 00000000ffe0c000 (reserved)

[ 0.000000] BIOS-e820: 0000000100000000 - 0000000460000000 (usable)

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] DMI 2.5 present.

[ 0.000000] No AGP bridge found

[ 0.000000] last_pfn = 0x460000 max_arch_pfn = 0x400000000

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] last_pfn = 0x9fc00 max_arch_pfn = 0x400000000

[ 0.000000] found SMP MP-table at [ffff8800000fdc80] fdc80

[ 0.000000] init_memory_mapping: 0000000000000000-000000009fc00000

[ 0.000000] init_memory_mapping: 0000000100000000-0000000460000000

[ 0.000000] RAMDISK: 378e4000 - 37ff0000

[ 0.000000] Reserving 128MB of memory at 752MB for crashkernel (System RAM: 17920MB)

[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL )

[ 0.000000] ACPI: XSDT 000000009fb39120 00084 (v01 INTEL S5000PSL 00000000 INTL 01000013)

[ 0.000000] ACPI: FACP 000000009fb37000 000F4 (v03 INTEL S5000PSL 00000000 INTL 01000013)

[ 0.000000] ACPI: DSDT 000000009fb30000 05809 (v02 INTEL S5000PSL 00000001 INTL 01000013)

[ 0.000000] ACPI: FACS 000000009fab4000 00040

[ 0.000000] ACPI: APIC 000000009fb36000 000C8 (v01 INTEL S5000PSL 00000000 INTL 01000013)

[ 0.000000] ACPI: SPCR 000000009fb2f000 00050 (v01 INTEL S5000PSL 00000000 INTL 01000013)

[ 0.000000] ACPI: HPET 000000009fb2e000 00038 (v01 INTEL S5000PSL 00000001 INTL 01000013)

[ 0.000000] ACPI: MCFG 000000009fb2d000 0003C (v01 INTEL S5000PSL 00000001 INTL 01000013)

[ 0.000000] ACPI: SSDT 000000009fb2c000 00A14 (v02 INTEL EIST 00004000 INTL 20060317)

[ 0.000000] ACPI: SSDT 000000009fb2b000 00193 (v02 INTEL IPMI 00004000 INTL 20060317)

[ 0.000000] ACPI: SSDT 000000009fb2a000 002D4 (v02 INTEL CST 00004000 INTL 20060317)

[ 0.000000] ACPI: HEST 000000009fb29000 000A8 (v01 INTEL S5000PSL 00000001 INTL 00000001)

[ 0.000000] ACPI: BERT 000000009fb28000 00030 (v01 INTEL S5000PSL 00000001 INTL 00000001)

[ 0.000000] ACPI: ERST 000000009fb27000 00230 (v01 INTEL S5000PSL 00000001 INTL 00000001)

[ 0.000000] ACPI: EINJ 000000009fb26000 00130 (v01 INTEL S5000PSL 00000001 INTL 00000001)

[ 0.000000] No NUMA configuration found

[ 0.000000] Faking a node at 0000000000000000-0000000460000000

[ 0.000000] Initmem setup node 0 0000000000000000-0000000460000000

[ 0.000000] NODE_DATA [000000045ffd9000 - 000000045fffffff]

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0x00000010 -> 0x00001000

[ 0.000000] DMA32 0x00001000 -> 0x00100000

[ 0.000000] Normal 0x00100000 -> 0x00460000

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[7] active PFN ranges

[ 0.000000] 0: 0x00000010 -> 0x0000009c

[ 0.000000] 0: 0x00000100 -> 0x0009f91a

[ 0.000000] 0: 0x0009f9d1 -> 0x0009fa32

[ 0.000000] 0: 0x0009fa9a -> 0x0009fab4

[ 0.000000] 0: 0x0009fb1a -> 0x0009fb26

[ 0.000000] 0: 0x0009fb3a -> 0x0009fc00

[ 0.000000] 0: 0x00100000 -> 0x00460000

[ 0.000000] ACPI: PM-Timer IO Port: 0x408

[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])

[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs

[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000

[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 0000000000100000

[ 0.000000] PM: Registered nosave memory: 000000009f91a000 - 000000009f9d1000

[ 0.000000] PM: Registered nosave memory: 000000009fa32000 - 000000009fa9a000

[ 0.000000] PM: Registered nosave memory: 000000009fab4000 - 000000009fb1a000

[ 0.000000] PM: Registered nosave memory: 000000009fb26000 - 000000009fb3a000

[ 0.000000] PM: Registered nosave memory: 000000009fc00000 - 00000000b0000000

[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000ffe00000

[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 00000000ffe0c000

[ 0.000000] PM: Registered nosave memory: 00000000ffe0c000 - 0000000100000000

[ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4fe00000)

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88045fc00000 s73728 r8192 d20480 u262144

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4130030

[ 0.000000] Policy zone: Normal

[ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-3600050e0fc071e00f8ea000069410000-part1 resume=/dev/disk/by-id/scsi-3600050e0fc071e00f8ea000069410000-part5 splash=silent crashkernel=256M-:128M showopts console=tty0 console=ttyS0,115200 vga=0x314 scsi_mod.scsi_logging_level=9411

[ 0.000000] bootsplash: silent mode.

[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[ 0.000000] Checking aperture...

[ 0.000000] No AGP bridge found

[ 0.000000] Memory: 16317736k/18350080k available (4419k kernel code, 1579060k absent, 453284k reserved, 7676k data, 1344k init)

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.

[ 0.000000] NR_IRQS:262400 nr_irqs:1152 16

[ 0.000000] Extended CMOS year: 2000

[ 0.000000] Console: colour dummy device 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] console [ttyS0] enabled

[ 0.000000] allocated 134217728 bytes of page_cgroup

[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[ 0.000000] Fast TSC calibration using PIT

[ 0.000000] Detected 2327.672 MHz processor.

[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4655.34 BogoMIPS (lpj=9310688)

[ 0.014789] pid_max: default: 32768 minimum: 301

[ 0.016511] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved

kdb_cmd[0]: defcmd archkdb "" "First line arch debugging"

kdb_cmd[8]: defcmd archkdbcpu "" "archkdb with only tasks on cpus"

kdb_cmd[15]: defcmd archkdbshort "" "archkdb with less detailed backtrace"

kdb_cmd[22]: defcmd archkdbcommon "" "Common arch debugging"

[ 0.036309] Security Framework initialized

[ 0.040030] AppArmor: AppArmor initialized

[ 0.045409] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)

[ 0.058181] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[ 0.065493] Mount-cache hash table entries: 256

[ 0.068247] Initializing cgroup subsys cpuacct

[ 0.072011] Initializing cgroup subsys memory

[ 0.076033] Initializing cgroup subsys devices

[ 0.080008] Initializing cgroup subsys freezer

[ 0.084007] Initializing cgroup subsys net_cls

[ 0.088007] Initializing cgroup subsys blkio

[ 0.092016] Initializing cgroup subsys perf_event

[ 0.096092] CPU: Physical Processor ID: 0

[ 0.100008] CPU: Processor Core ID: 0

[ 0.104009] mce: CPU supports 6 MCE banks

[ 0.108015] CPU0: Thermal monitoring enabled (TM2)

[ 0.112010] using mwait in idle threads.

[ 0.120666] ACPI: Core revision 20110413

[ 0.128564] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.175161] CPU0: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz stepping 07

[ 0.184010] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.

[ 0.186907] PEBS disabled due to CPU errata.

[ 0.188014] ... version: 2

[ 0.192012] ... bit width: 40

[ 0.196012] ... generic registers: 2

[ 0.200013] ... value mask: 000000ffffffffff

[ 0.204013] ... max period: 000000007fffffff

[ 0.208013] ... fixed-purpose events: 3

[ 0.212013] ... event mask: 0000000700000003

[ 0.216406] NMI watchdog enabled, takes one hw-pmu counter.

[ 0.220193] Booting Node 0, Processors #1

[ 0.240043] NMI watchdog enabled, takes one hw-pmu counter.

[ 0.244193] #2

[ 0.340040] NMI watchdog enabled, takes one hw-pmu counter.

[ 0.344175] #3

[ 0.360040] NMI watchdog enabled, takes one hw-pmu counter.

[ 0.364187] #4

[ 0.380076] NMI watchdog enabled, takes one hw-pmu counter.

[ 0.384241] #5

[ 0.400043] NMI watchdog enabled, takes one hw-pmu counter.

[ 0.404197] #6

[ 0.420045] NMI watchdog enabled, takes one hw-pmu counter.

[ 0.424174] #7 Ok.

[ 0.440046] NMI watchdog enabled, takes one hw-pmu counter.

[ 0.444056] Brought up 8 CPUs

[ 0.448031] Total of 8 processors activated (37241.80 BogoMIPS).

[ 0.460347] devtmpfs: initialized

[ 0.469738] PM: Registering ACPI NVS region at 9f91a000 (749568 bytes)

[ 0.472054] PM: Registering ACPI NVS region at 9fab4000 (417792 bytes)

[ 0.476228] print_constraints: dummy:

[ 0.480058] Time: 15:53:17 Date: 04/09/13

[ 0.484230] NET: Registered protocol family 16

[ 0.488197] ACPI: bus type pci registered

[ 0.492118] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xa0000000-0xafffffff] (base 0xa0000000)

[ 0.496033] PCI: MMCONFIG at [mem 0xa0000000-0xafffffff] reserved in E820

[ 0.555786] PCI: Using configuration type 1 for base access

[ 0.556923] bio: create slab <bio-0> at 0

[ 0.565658] ACPI: Executed 1 blocks of module-level executable AML code

[ 0.568324] ACPI: Actual Package length (6) is larger than NumElements field (2), truncated

[ 0.572037]

[ 0.573638] ACPI: Actual Package length (6) is larger than NumElements field (2), truncated

[ 0.580037]

[ 0.584149] ACPI: Actual Package length (6) is larger than NumElements field (2), truncated

[ 0.588038]

[ 0.589639] ACPI: Actual Package length (6) is larger than NumElements field (2), truncated

[ 0.596038]

[ 0.600146] ACPI: Actual Package length (6) is larger than NumElements field (2), truncated

[ 0.604039]

[ 0.605640] ACPI: Actual Package length (6) is larger than NumElements field (2), truncated

[ 0.612039]

[ 0.616148] ACPI: Actual Package length (6) is larger than NumElements field (2), truncated

[ 0.620040]

[ 0.621643] ACPI: Actual Package length (6) is larger than NumElements field (2), truncated

[ 0.624040]

[ 0.629582] ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110413/dsopcode-236)

[ 0.634311] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff880446c97ec0), AE_AML_BUFFER_LIMIT (20110413/psparse-536)

[ 0.646507] ACPI: Interpreter enabled

[ 0.648043] ACPI: (supports S0 S1 S4 S5)

[ 0.653172] ACPI: Using IOAPIC for interrupt routing

[ 0.661795] ACPI: No dock devices found.

[ 0.664045] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.673148] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.683832] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0ca1]

[ 0.684045] pci_root PNP0A03:00: host bridge window [io 0x0ca4-0x0cf7]

[ 0.688044] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]

[ 0.692045] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]

[ 0.696045] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000fffff]

[ 0.700045] pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xfdffffff]

[ 0.704045] pci_root PNP0A03:00: host bridge window [mem 0xfe700000-0xfe7003ff]

[ 0.708046] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]

[ 0.718380] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'

[ 0.720143] pci 0000:00:02.0: PCI bridge to [bus 01-06]

[ 0.729051] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'

[ 0.737510] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'

[ 0.744138] pci 0000:01:00.0: PCI bridge to [bus 02-04]

[ 0.749194] pci 0000:02:00.0: PCI bridge to [bus 03-03]

[ 0.767619] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'

[ 0.768281] pci 0000:02:02.0: PCI bridge to [bus 04-04]

[ 0.785193] pci 0000:01:00.3: PCI bridge to [bus 05-06]

[ 0.813745] pci 0000:05:02.0: PCI bridge to [bus 06-06]

[ 0.816956] pci 0000:00:03.0: PCI bridge to [bus 07-07]

[ 0.828065] pci 0000:00:04.0: PCI bridge to [bus 08-08]

[ 0.832090] pci 0000:00:05.0: PCI bridge to [bus 09-09]

[ 0.836089] pci 0000:00:06.0: PCI bridge to [bus 0a-0a]

[ 0.840089] pci 0000:00:07.0: PCI bridge to [bus 0b-0b]

[ 0.844101] pci 0000:00:1c.0: PCI bridge to [bus 0c-0c]

[ 0.848262] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)

[ 0.853054] pci0000:00: Requesting ACPI _OSC control (0x1d)

[ 0.856057] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d

[ 0.860054] ACPI _OSC control for PCIe not granted, disabling ASPM

[ 0.874266] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)

[ 0.880122] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)

[ 0.885448] ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)

[ 0.889437] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)

[ 0.893439] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11)

[ 0.897439] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11)

[ 0.901442] ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)

[ 0.905440] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)

[ 0.909480] vgaarb: device added: PCI:0000:0d:0c.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.912059] vgaarb: loaded

[ 0.916130] PCI: Using ACPI for IRQ routing

[ 0.927684] NetLabel: Initializing

[ 0.928059] NetLabel: domain hash size = 128

[ 0.932059] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.936073] NetLabel: unlabeled traffic allowed by default

[ 0.940063] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

[ 0.944062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[ 0.948993] hpet0: 3 comparators, 64-bit 14.318180 MHz counter

[ 0.976092] Switching to clocksource hpet

[ 0.981202] Switched to NOHz mode on CPU #4

[ 0.981462] Switched to NOHz mode on CPU #6

[ 0.981721] Switched to NOHz mode on CPU #1

[ 0.981941] Switched to NOHz mode on CPU #3

[ 0.983696] Switched to NOHz mode on CPU #2

[ 0.983869] Switched to NOHz mode on CPU #5

[ 0.983909] Switched to NOHz mode on CPU #0

[ 0.984029] Switched to NOHz mode on CPU #7

[ 1.014710] AppArmor: AppArmor Filesystem Enabled

[ 1.019476] pnp: PnP ACPI init

[ 1.022553] ACPI: bus type pnp registered

[ 1.029213] system 00:01: [mem 0xa0000000-0xafffffff] has been reserved

[ 1.035839] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved

[ 1.042455] system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved

[ 1.049412] system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved

[ 1.056369] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved

[ 1.062979] system 00:01: [mem 0xfe600000-0xfe6fffff] has been reserved

[ 1.069590] system 00:01: [mem 0xfe000000-0xfe01ffff] has been reserved

[ 1.076199] system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved

[ 1.083615] system 00:06: [io 0x0500-0x053f] has been reserved

[ 1.089536] system 00:06: [io 0x0400-0x047f] has been reserved

[ 1.095461] system 00:06: [io 0x0800-0x087f] has been reserved

[ 1.101376] system 00:06: [io 0x0ca0-0x0caf] could not be reserved

[ 1.107640] system 00:06: [io 0x0161] has been reserved

[ 1.112950] system 00:06: [io 0x0162] has been reserved

[ 1.119497] pnp: PnP ACPI: found 14 devices

[ 1.123684] ACPI: ACPI bus type pnp unregistered

[ 1.134417] pci 0000:08:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]

[ 1.143033] pci 0000:0d:0c.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]

[ 1.152701] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbaf00000-0xbb0fffff]

[ 1.159578] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbb100000-0xbb2fffff 64bit pref]

[ 1.167403] pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff]

[ 1.173587] pci 0000:02:00.0: PCI bridge to [bus 03-03]

[ 1.178808] pci 0000:02:00.0: bridge window [io disabled]

[ 1.184511] pci 0000:02:00.0: bridge window [mem disabled]

[ 1.190175] pci 0000:02:00.0: bridge window [mem pref disabled]

[ 1.196357] pci 0000:02:02.0: PCI bridge to [bus 04-04]

[ 1.201584] pci 0000:02:02.0: bridge window [io 0x4000-0x4fff]

[ 1.207720] pci 0000:02:02.0: bridge window [mem 0xba000000-0xba8fffff]

[ 1.214513] pci 0000:02:02.0: bridge window [mem pref disabled]

[ 1.220648] pci 0000:01:00.0: PCI bridge to [bus 02-04]

[ 1.225877] pci 0000:01:00.0: bridge window [io 0x4000-0x4fff]

[ 1.232015] pci 0000:01:00.0: bridge window [mem 0xba000000-0xba8fffff]

[ 1.238805] pci 0000:01:00.0: bridge window [mem pref disabled]

[ 1.244943] pci 0000:05:02.0: PCI bridge to [bus 06-06]

[ 1.250170] pci 0000:05:02.0: bridge window [io 0x3000-0x3fff]

[ 1.256354] pci 0000:05:02.0: bridge window [mem 0xba900000-0xba9fffff]

[ 1.263185] pci 0000:05:02.0: bridge window [mem pref disabled]

[ 1.269419] pci 0000:01:00.3: PCI bridge to [bus 05-06]

[ 1.274644] pci 0000:01:00.3: bridge window [io 0x3000-0x3fff]

[ 1.280781] pci 0000:01:00.3: bridge window [mem 0xba900000-0xbaafffff]

[ 1.287570] pci 0000:01:00.3: bridge window [mem pref disabled]

[ 1.293714] pci 0000:00:02.0: PCI bridge to [bus 01-06]

[ 1.298943] pci 0000:00:02.0: bridge window [io 0x3000-0x4fff]

[ 1.305034] pci 0000:00:02.0: bridge window [mem 0xba000000-0xbabfffff]

[ 1.311817] pci 0000:00:02.0: bridge window [mem pref disabled]

[ 1.317908] pci 0000:00:03.0: PCI bridge to [bus 07-07]

[ 1.323129] pci 0000:00:03.0: bridge window [io disabled]

[ 1.328788] pci 0000:00:03.0: bridge window [mem disabled]

[ 1.334443] pci 0000:00:03.0: bridge window [mem pref disabled]

[ 1.340537] pci 0000:08:00.0: BAR 6: assigned [mem 0xbad20000-0xbad3ffff pref]

[ 1.347761] pci 0000:00:04.0: PCI bridge to [bus 08-08]

[ 1.352984] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]

[ 1.359076] pci 0000:00:04.0: bridge window [mem 0xbad00000-0xbadfffff]

[ 1.365866] pci 0000:00:04.0: bridge window [mem 0xb8000000-0xb9ffffff 64bit pref]

[ 1.373605] pci 0000:00:05.0: PCI bridge to [bus 09-09]

[ 1.378835] pci 0000:00:05.0: bridge window [io disabled]

[ 1.384494] pci 0000:00:05.0: bridge window [mem disabled]

[ 1.390150] pci 0000:00:05.0: bridge window [mem pref disabled]

[ 1.396241] pci 0000:00:06.0: PCI bridge to [bus 0a-0a]

[ 1.401464] pci 0000:00:06.0: bridge window [io disabled]

[ 1.407122] pci 0000:00:06.0: bridge window [mem disabled]

[ 1.412779] pci 0000:00:06.0: bridge window [mem pref disabled]

[ 1.418870] pci 0000:00:07.0: PCI bridge to [bus 0b-0b]

[ 1.424097] pci 0000:00:07.0: bridge window [io disabled]

[ 1.429758] pci 0000:00:07.0: bridge window [mem disabled]

[ 1.435416] pci 0000:00:07.0: bridge window [mem pref disabled]

[ 1.441510] pci 0000:00:1c.0: PCI bridge to [bus 0c-0c]

[ 1.446741] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]

[ 1.452833] pci 0000:00:1c.0: bridge window [mem 0xbaf00000-0xbb0fffff]

[ 1.459617] pci 0000:00:1c.0: bridge window [mem 0xbb100000-0xbb2fffff 64bit pref]

[ 1.467358] pci 0000:0d:0c.0: BAR 6: assigned [mem 0xbac20000-0xbac3ffff pref]

[ 1.474579] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]

[ 1.479804] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]

[ 1.485896] pci 0000:00:1e.0: bridge window [mem 0xbac00000-0xbacfffff]

[ 1.492687] pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xb7ffffff 64bit pref]

[ 1.500452] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.507207] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.514052] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.520948] pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 1.528066] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.534771] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.541476] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.548181] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.554888] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.561594] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 1.568724] NET: Registered protocol family 2

[ 1.573625] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)

[ 1.583779] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)

[ 1.595364] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[ 1.602614] TCP: Hash tables configured (established 524288 bind 65536)

[ 1.609233] TCP reno registered

[ 1.612401] UDP hash table entries: 8192 (order: 6, 262144 bytes)

[ 1.618660] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)

[ 1.625739] NET: Registered protocol family 1

[ 1.630177] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[ 1.636895] pci 0000:00:1d.0: PCI INT A disabled

[ 1.641527] pci 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22

[ 1.648244] pci 0000:00:1d.1: PCI INT B disabled

[ 1.652872] pci 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23

[ 1.659583] pci 0000:00:1d.2: PCI INT C disabled

[ 1.664214] pci 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22

[ 1.670924] pci 0000:00:1d.3: PCI INT D disabled

[ 1.675553] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[ 1.682391] pci 0000:00:1d.7: PCI INT A disabled

[ 1.687011] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]

[ 1.693775] Unpacking initramfs...

[ 1.826090] Freeing initrd memory: 7216k freed

[ 1.834056] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[ 1.840532] Placing 64MB software IO TLB between ffff88009b91a000 - ffff88009f91a000

[ 1.848304] software IO TLB at phys 0x9b91a000 - 0x9f91a000

[ 1.855206] audit: initializing netlink socket (disabled)

[ 1.860659] type=2000 audit(1365522796.860:1): initialized

[ 1.889271] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 1.898869] VFS: Disk quotas dquot_6.5.2

[ 1.902882] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 1.909505] msgmni has been set to 7971

[ 1.913597] alg: No test for stdrng (krng)

[ 1.917803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 1.925271] io scheduler noop registered

[ 1.929207] io scheduler deadline registered

[ 1.933590] io scheduler cfq registered (default)

[ 1.941066] vesafb: mode is 800x600x16, linelength=1600, pages=16

[ 1.947175] vesafb: scrolling: redraw

[ 1.950839] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

[ 1.956910] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90012680000, using 1875k, total 16384k

[ 1.966392] bootsplash 3.2.0-2010/03/31: looking for picture...

[ 1.966394] bootsplash: silentjpeg size 62784 bytes

[ 1.973068] bootsplash: ...found (800x600, 32557 bytes, v3).

[ 2.039455] Console: switching to colour frame buffer device 96x33

[ 2.095362] fb0: VESA VGA frame buffer device

[ 2.099880] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled

[ 2.106347] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 2.148103] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 2.180650] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 2.249155] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 2.255081] Non-volatile memory driver v1.3

[ 2.259277] Linux agpgart interface v0.103

[ 2.263508] Fixed MDIO Bus: probed

[ 2.267000] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

[ 2.278376] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 2.283414] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 2.288632] mousedev: PS/2 mouse device common for all mice

[ 2.294380] cpuidle: using governor ladder

[ 2.298515] cpuidle: using governor menu

[ 2.302473] EFI Variables Facility v0.08 2004-May-17

[ 2.307781] TCP cubic registered

[ 2.311069] Registering the dns_resolver key type

[ 2.354426] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[ 2.363156] registered taskstats version 1

[ 2.373012] Magic number: 9:592:891

[ 2.378973] Freeing unused kernel memory: 1344k freed

[ 2.384536] Write protecting the kernel read-only data: 10240k

[ 2.394861] Freeing unused kernel memory: 1708k freed

[ 2.403205] Freeing unused kernel memory: 1008k freed

doing fast boot

[ 2.465761] SCSI subsystem initialized

[ 2.477850] ata_piix 0000:00:1f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20

[ 2.485410] scsi0 : ata_piix

[ 2.485415] Error handler scsi_eh_0 sleeping

[ 2.492953] scsi1 : ata_piix

[ 2.492957] Error handler scsi_eh_1 sleeping

[ 2.501332] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50b0 irq 14

[ 2.508348] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50b8 irq 15

[ 2.515365] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20

[ 2.515422] Error handler scsi_eh_0 waking up

[ 2.515606] Error handler scsi_eh_1 waking up

[ 2.531334] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

[ 2.536951] scsi2 : ata_piix

[ 2.536955] Error handler scsi_eh_2 sleeping

[ 2.544297] scsi3 : ata_piix

[ 2.544301] Error handler scsi_eh_3 sleeping

[ 2.552498] ata3: SATA max UDMA/133 cmd 0x50c8 ctl 0x50e4 bmdma 0x50a0 irq 20

[ 2.559662] ata4: SATA max UDMA/133 cmd 0x50c0 ctl 0x50e0 bmdma 0x50a8 irq 20

[ 2.566920] Error handler scsi_eh_2 waking up

[ 2.566963] Error handler scsi_eh_3 waking up

[ 2.680172] ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33

[ 2.680181] Error handler scsi_eh_1 sleeping

[ 2.704219] ata1.00: configured for UDMA/33

[ 2.709864] Error handler scsi_eh_0 sleeping

[ 2.709958] scsi 0:0:0:0: Send:

[ 2.709982] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 24 00

[ 2.714866] scsi 0:0:0:0: Done: SUCCESS

[ 2.714870] scsi 0:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK

[ 2.714874] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 24 00

[ 2.714927] scsi 0:0:0:0: Send:

[ 2.714930] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00

[ 2.718873] scsi 0:0:0:0: Done: SUCCESS

[ 2.718876] scsi 0:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK

[ 2.718880] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00

[ 2.718925] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5

[ 2.732124] Error handler scsi_eh_3 sleeping

[ 2.786482] Error handler scsi_eh_2 sleeping

[ 2.803907] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.

[ 2.811372] 3w-9xxx 0000:08:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32

[ 2.818544] Error handler scsi_eh_4 sleeping

[ 2.884077] Refined TSC clocksource calibration: 2327.499 MHz.

[ 2.889963] Switching to clocksource tsc

[ 3.096026] scsi4 : 3ware 9000 Storage Controller

[ 3.100828] 3w-9xxx: scsi4: Found a 3ware 9000 Storage Controller at 0xbad00000, IRQ: 32.

[ 3.357006] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1

[ 3.444028] 3w-9xxx: scsi4: Firmware FE9X 4.10.00.027, BIOS BE9X 4.08.00.004, Ports: 8.

[ 3.452146] scsi 4:0:0:0: Send:

[ 3.455432] scsi 4:0:0:0: CDB: Inquiry: 12 00 00 00 24 00

[ 24.800020] scsi 4:0:0:0: Done: TIMEOUT

[ 24.803903] scsi 4:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK

[ 24.804015] scsi 4:0:0:0: CDB: Inquiry: 12 00 00 00 24 00

[ 24.816159] Error handler scsi_eh_4 waking up

[ 24.820556] Total of 1 commands on 1 devices require eh work

[ 24.826249] scsi 4:0:0:0: WARNING: (0x06:0x002C): Command (0x12) timed out, resetting card.

[ 49.932014] scsi 4:0:0:0: Send:

[ 49.935314] scsi 4:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00

gwstslesvmh02:~ # lspci -vvv

00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub (rev b1)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 0

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-

Address: fee00000 Data: 0000

Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited

ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited

ClockPM- Surprise+ LLActRep+ BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-

RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol+

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev b1) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=01, subordinate=06, sec-latency=0

I/O behind bridge: 00003000-00004fff

Memory behind bridge: ba000000-babfffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-

Address: fee00000 Data: 0000

Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited

ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #2, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited

ClockPM- Surprise+ LLActRep+ BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-

RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

Kernel modules: shpchp

00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev b1) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=07, subordinate=07, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-

Address: fee00000 Data: 0000

Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited

ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #3, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited

ClockPM- Surprise+ LLActRep+ BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

Kernel modules: shpchp

00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev b1) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=08, subordinate=08, sec-latency=0

I/O behind bridge: 00002000-00002fff

Memory behind bridge: bad00000-badfffff

Prefetchable memory behind bridge: 00000000b8000000-00000000b9ffffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-

Address: fee00000 Data: 0000

Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited

ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #4, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited

ClockPM- Surprise+ LLActRep+ BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

Slot #6, PowerLimit 25.000W; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

Control: AttnInd Off, PwrInd On, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet+ Interlock-

Changed: MRL- PresDet- LinkState-

RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

Kernel modules: shpchp

00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev b1) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=09, subordinate=09, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-

Address: fee00000 Data: 0000

Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited

ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited

ClockPM- Surprise+ LLActRep+ BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

Kernel modules: shpchp

00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 (rev b1) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-

Address: fee00000 Data: 0000

Capabilities: [6c] Express (v1) Root Port (Slot+), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited

ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #6, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited

ClockPM- Surprise+ LLActRep+ BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-

Slot #5, PowerLimit 25.000W; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

Control: AttnInd Off, PwrInd On, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock-

Changed: MRL- PresDet+ LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

Kernel modules: shpchp

00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev b1) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-

Address: fee00000 Data: 0000

Capabilities: [6c] Express (v1) Root Port (Slot-), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited

ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #7, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited

ClockPM- Surprise+ LLActRep+ BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

Kernel modules: shpchp

00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA Engine (rev b1)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 72

Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] MSI: Enable+ Count=1/1 Maskable- 64bit-

Address: fee0100c Data: 4159

Capabilities: [6c] Express (v1) Root Complex Integrated Endpoint, MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM L1 Enabled; Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-

Kernel driver in use: ioatdma

Kernel modules: ioatdma

00:10.0 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Kernel driver in use: i5000_edac

Kernel modules: i5k_amb, i5000_edac

00:10.1 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Kernel modules: i5k_amb, i5000_edac

00:10.2 Host bridge: Intel Corporation 5000 Series Chipset FSB Registers (rev b1)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Kernel modules: i5k_amb, i5000_edac

00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev b1)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev b1)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0

I/O behind bridge: 00006000-00006fff

Memory behind bridge: baf00000-bb0fffff

Prefetchable memory behind bridge: 00000000bb100000-00000000bb2fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00

DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited

ExtTag+ RBE- FLReset-

DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <4us

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+

Slot #4, PowerLimit 25.000W; Interlock- NoCompl-

SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-

Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-

SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-

Changed: MRL- PresDet- LinkState-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-

Address: feeff00c Data: 4141

Capabilities: [90] Subsystem: Intel Corporation Device 3476

Capabilities: [a0] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [100 v1] Virtual Channel

Caps: LPEVC=0 RefClk=100ns PATEntryBits=1

Arb: Fixed+ WRR32- WRR64- WRR128-

Ctrl: ArbSelect=Fixed

Status: InProgress-

VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-

Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff

Status: NegoPending- InProgress-

VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-

Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-

Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00

Status: NegoPending- InProgress-

Capabilities: [180 v1] Root Complex Link

Desc: PortNumber=01 ComponentID=02 EltType=Config

Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+

Addr: 00000000fed1c001

Kernel driver in use: pcieport

Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) (prog-if 00 [UHCI])

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 23

Region 4: I/O ports at 5080 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.1 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) (prog-if 00 [UHCI])

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin B routed to IRQ 22

Region 4: I/O ports at 5060 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.2 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) (prog-if 00 [UHCI])

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin C routed to IRQ 23

Region 4: I/O ports at 5040 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.3 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 (rev 09) (prog-if 00 [UHCI])

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin D routed to IRQ 22

Region 4: I/O ports at 5020 [size=32]

Kernel driver in use: uhci_hcd

Kernel modules: uhci-hcd

00:1d.7 USB controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) (prog-if 20 [EHCI])

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 23

Region 0: Memory at bae00400 (32-bit, non-prefetchable) [size=1K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] Debug port: BAR=1 offset=00a0

Kernel driver in use: ehci_hcd

Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) (prog-if 01 [Subtractive decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=32

I/O behind bridge: 00001000-00001fff

Memory behind bridge: bac00000-bacfffff

Prefetchable memory behind bridge: 00000000b0000000-00000000b7ffffff

Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+

Capabilities: [50] Subsystem: Intel Corporation Device 3476

00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) (prog-if 8a [Master SecP PriP])

Subsystem: Intel Corporation Device 3476

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin A routed to IRQ 20

Region 0: I/O ports at 01f0 [size=8]

Region 1: I/O ports at 03f4 [size=1]

Region 2: I/O ports at 0170 [size=8]

Region 3: I/O ports at 0374 [size=1]

Region 4: I/O ports at 50b0 [size=16]

Kernel driver in use: ata_piix

Kernel modules: ata_generic, pata_acpi, ata_piix

00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 09) (prog-if 8f [Master SecP SecO PriP PriO])

Subsystem: Intel Corporation Device 3476

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0

Interrupt: pin B routed to IRQ 20

Region 0: I/O ports at 50c8 [size=8]

Region 1: I/O ports at 50e4 [size=4]

Region 2: I/O ports at 50c0 [size=8]

Region 3: I/O ports at 50e0 [size=4]

Region 4: I/O ports at 50a0 [size=16]

Region 5: Memory at bae00000 (32-bit, non-prefetchable) [size=1K]

Capabilities: [70] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Kernel driver in use: ata_piix

Kernel modules: ata_generic, pata_acpi, ata_piix

00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Interrupt: pin B routed to IRQ 20

Region 4: I/O ports at 5000 [size=32]

Kernel driver in use: i801_smbus

Kernel modules: i2c-i801

01:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=01, secondary=02, subordinate=04, sec-latency=0

I/O behind bridge: 00004000-00004fff

Memory behind bridge: ba000000-ba8fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [44] Express (v1) Upstream Port, MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-SlotPowerLimit 0.000W

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 4096 bytes

DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-

LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

Capabilities: [70] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [80] Subsystem: Intel Corporation Device 3476

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

Kernel modules: shpchp

01:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=01, secondary=05, subordinate=06, sec-latency=48

I/O behind bridge: 00003000-00003fff

Memory behind bridge: ba900000-baafffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-

MaxPayload 128 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-

LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-

Capabilities: [6c] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [80] Subsystem: Intel Corporation Device 3476

Capabilities: [d8] PCI-X bridge device

Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv

Status: Dev=00:00.3 64bit- 133MHz- SCD- USC- SCO- SRD-

Upstream: Capacity=65535 CommitmentLimit=65535

Downstream: Capacity=65535 CommitmentLimit=65535

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UESvrt: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-

Kernel modules: shpchp

02:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=02, secondary=03, subordinate=03, sec-latency=0

I/O behind bridge: 0000f000-00000fff

Memory behind bridge: fff00000-000fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [44] Express (v1) Downstream Port (Slot-), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 4096 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0 unlimited, L1 unlimited

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Capabilities: [70] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [80] Subsystem: Intel Corporation Device 3476

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

Kernel modules: shpchp

02:02.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 (rev 01) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Bus: primary=02, secondary=04, subordinate=04, sec-latency=0

I/O behind bridge: 00004000-00004fff

Memory behind bridge: ba000000-ba8fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [44] Express (v1) Downstream Port (Slot-), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us

ExtTag- RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 128 bytes, MaxReadReq 4096 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 unlimited, L1 unlimited

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Capabilities: [70] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [80] Subsystem: Intel Corporation Device 3476

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Kernel driver in use: pcieport

Kernel modules: shpchp

04:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 70

Region 0: Memory at ba820000 (32-bit, non-prefetchable) [size=128K]

Region 1: Memory at ba400000 (32-bit, non-prefetchable) [size=4M]

Region 2: I/O ports at 4020 [size=32]

Capabilities: [c8] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-

Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+

Address: 00000000fee0400c Data: 4169

Capabilities: [e0] Express (v1) Endpoint, MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us

ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-

LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM unknown, Latency L0 <128ns, L1 <64us

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-

Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-41-52-5c

Kernel driver in use: e1000e

Kernel modules: e1000e

04:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)

Subsystem: Intel Corporation Intel S5000PSLSATA Server Board

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin B routed to IRQ 71

Region 0: Memory at ba800000 (32-bit, non-prefetchable) [size=128K]

Region 1: Memory at ba000000 (32-bit, non-prefetchable) [size=4M]

Region 2: I/O ports at 4000 [size=32]

Capabilities: [c8] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-

Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+

Address: 00000000fee0400c Data: 4179

Capabilities: [e0] Express (v1) Endpoint, MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us

ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 512 bytes

DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-

LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM unknown, Latency L0 <128ns, L1 <64us

ClockPM- Surprise- LLActRep- BwNot-

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-

Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-41-52-5c

Kernel driver in use: e1000e

Kernel modules: e1000e

05:01.0 Ethernet controller: Intel Corporation 82542 Gigabit Ethernet Controller (Fiber) (rev 03)

Subsystem: Intel Corporation PRO/1000 Gigabit Server Adapter

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 32 (63750ns min), Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 25

Region 0: Memory at baa00000 (32-bit, non-prefetchable) [size=128K]

Capabilities: [dc] Power Management version 1

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Kernel driver in use: e1000

Kernel modules: e1000

05:02.0 PCI bridge: Pericom Semiconductor PI7C21P100 PCI to PCI Bridge (rev 01) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 32, Cache Line Size: 64 bytes

Bus: primary=05, secondary=06, subordinate=06, sec-latency=64

I/O behind bridge: 00003000-00003fff

Memory behind bridge: ba900000-ba9fffff

Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff

Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-

BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-

PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

Capabilities: [80] PCI-X bridge device

Secondary Status: 64bit+ 133MHz+ SCD- USC+ SCO- SRD- Freq=133MHz

Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-

Upstream: Capacity=32 CommitmentLimit=32

Downstream: Capacity=32 CommitmentLimit=32

Capabilities: [90] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Kernel modules: shpchp

06:04.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (Copper) (rev 03)

Subsystem: Intel Corporation PRO/1000 GT Quad Port Server Adapter

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (63750ns min), Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 26

Region 0: Memory at ba900000 (64-bit, non-prefetchable) [size=128K]

Region 4: I/O ports at 30c0 [size=64]

Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-

Capabilities: [e4] PCI-X non-bridge device

Command: DPERE- ERO+ RBC=2048 OST=1

Status: Dev=06:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-

Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Kernel driver in use: e1000

Kernel modules: e1000

06:04.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (Copper) (rev 03)

Subsystem: Intel Corporation PRO/1000 GT Quad Port Server Adapter

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (63750ns min), Cache Line Size: 64 bytes

Interrupt: pin B routed to IRQ 27

Region 0: Memory at ba920000 (64-bit, non-prefetchable) [size=128K]

Region 4: I/O ports at 3080 [size=64]

Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-

Capabilities: [e4] PCI-X non-bridge device

Command: DPERE- ERO+ RBC=2048 OST=1

Status: Dev=06:04.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-

Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Kernel driver in use: e1000

Kernel modules: e1000

06:06.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (Copper) (rev 03)

Subsystem: Intel Corporation PRO/1000 GT Quad Port Server Adapter

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (63750ns min), Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 24

Region 0: Memory at ba940000 (64-bit, non-prefetchable) [size=128K]

Region 4: I/O ports at 3040 [size=64]

Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-

Capabilities: [e4] PCI-X non-bridge device

Command: DPERE- ERO+ RBC=2048 OST=1

Status: Dev=06:06.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-

Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Kernel driver in use: e1000

Kernel modules: e1000

06:06.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (Copper) (rev 03)

Subsystem: Intel Corporation PRO/1000 GT Quad Port Server Adapter

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 64 (63750ns min), Cache Line Size: 64 bytes

Interrupt: pin B routed to IRQ 25

Region 0: Memory at ba960000 (64-bit, non-prefetchable) [size=128K]

Region 4: I/O ports at 3000 [size=64]

Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-

Capabilities: [e4] PCI-X non-bridge device

Command: DPERE- ERO+ RBC=2048 OST=1

Status: Dev=06:06.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-

Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+

Address: 0000000000000000 Data: 0000

Kernel driver in use: e1000

Kernel modules: e1000

08:00.0 RAID bus controller: 3ware Inc 9650SE SATA-II RAID PCIe (rev 01)

Subsystem: 3ware Inc 9650SE SATA-II RAID PCIe

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+

Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 0, Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 32

Region 0: Memory at b8000000 (64-bit, prefetchable) [size=32M]

Region 2: Memory at bad00000 (64-bit, non-prefetchable) [size=4K]

Region 4: I/O ports at 2000 [size=256]

Expansion ROM at bad20000 [disabled] [size=128K]

Capabilities: [40] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [50] MSI: Enable+ Count=1/32 Maskable- 64bit+

Address: 00000000fec80020 Data: 0008

Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00

DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us

ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-

RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+

MaxPayload 128 bytes, MaxReadReq 512 bytes

DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-

LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <64us

ClockPM- Surprise- LLActRep+ BwNot-

LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt-

Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-

UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+

AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-

Kernel driver in use: 3w-9xxx

Kernel modules: 3w-9xxx

0d:0c.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller])

Subsystem: Intel Corporation S5000PSLSATA Server Board

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B+ DisINTx-

Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

Latency: 32 (2000ns min), Cache Line Size: 64 bytes

Interrupt: pin A routed to IRQ 11

Region 0: Memory at b0000000 (32-bit, prefetchable) [size=128M]

Region 1: I/O ports at 1000 [size=256]

Region 2: Memory at bac00000 (32-bit, non-prefetchable) [size=64K]

Expansion ROM at bac20000 [disabled] [size=128K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

Kernel modules: radeonfb

Next message: P J P: "Re: [Patch] Read CONFIG_RD_ variables for initramfs compression"
Previous message: Masami Hiramatsu: "Re: [PATCH v4 2/3] Support for perf to probe into SDT markers:"
Next in thread: Bjorn Helgaas: "Re: [PATCH] PCI: add quirk for 3ware 9650SE controller"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]