[PATCH v3 03/10] spmi: add generic SPMI controller bindingdocumentation

From: Josh Cartwright
Date: Mon Oct 28 2013 - 15:16:31 EST


Signed-off-by: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/spmi/spmi.txt | 41 +++++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spmi/spmi.txt

diff --git a/Documentation/devicetree/bindings/spmi/spmi.txt b/Documentation/devicetree/bindings/spmi/spmi.txt
new file mode 100644
index 0000000..32a180d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/spmi.txt
@@ -0,0 +1,41 @@
+System Power Management Interface (SPMI) Controller
+
+This document defines a generic set of bindings for use by SPMI controllers. A
+controller is modelled in device tree as a node with zero or more child nodes,
+each representing a unique slave on the bus.
+
+Required properties:
+- #address-cells : must be set to 2
+- #size-cells : must be set to 0
+
+Child nodes:
+
+An SPMI controller node can contain zero or more child nodes representing slave
+devices on the bus. Child 'reg' properties are specified as an address, type
+pair. The address must be in the range 0-15 (4 bits). The type must be one of
+SPMI_USID or SPMI_GSID (1) for Unique Slave ID or Group Slave ID respectively.
+These are the identifiers "statically assigned by the system integrator", as
+per the SPMI spec.
+
+Each child node must have one and only one 'reg' entry of type SPMI_USID.
+
+#include <dt-bindings/spmi/spmi.h>
+
+ controller@.. {
+ compatible = "...";
+ reg = <...>;
+
+ #address-cells = <2>;
+ #size-cells <0>;
+
+ child@0 {
+ compatible = "...";
+ reg = <0 SPMI_USID>;
+ };
+
+ child@7 {
+ compatible = "...";
+ reg = <7 SPMI_USID
+ 3 SPMI_GSID>;
+ };
+ };
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/