Re: [PATCH] x86, microcode, Fix long microcode load time when firmwarefile is missing [v2]

From: Prarit Bhargava
Date: Mon Oct 28 2013 - 11:12:28 EST




On 10/28/2013 11:05 AM, Takashi Iwai wrote:
> At Mon, 28 Oct 2013 08:06:08 -0400,
> Prarit Bhargava wrote:
>>
>> If no firmware is found on the system that matches the processor, the
>> microcode module can take hours to load. For example on recent kernels
>> when loading the microcode module on an Intel system:
>>
>> [ 239.532116] microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x413
>> [ 299.693447] microcode: CPU1 sig=0x306e4, pf=0x1, revision=0x413
>> [ 359.821972] microcode: CPU2 sig=0x306e4, pf=0x1, revision=0x413
>> [ 419.960263] microcode: CPU3 sig=0x306e4, pf=0x1, revision=0x413
>> [ 480.090024] microcode: CPU4 sig=0x306e4, pf=0x1, revision=0x413
>> ...
>> [ 2825.151364] microcode: CPU43 sig=0x306e4, pf=0x1, revision=0x413
>> [ 2885.280863] microcode: CPU44 sig=0x306e4, pf=0x1, revision=0x413
>> [ 2945.410719] microcode: CPU45 sig=0x306e4, pf=0x1, revision=0x413
>> [ 3005.540541] microcode: CPU46 sig=0x306e4, pf=0x1, revision=0x413
>> [ 3065.670405] microcode: CPU47 sig=0x306e4, pf=0x1, revision=0x413
>> ...
>> etc.
>>
>> Similarly there is a 60 second "hang" when loading the AMD module, which
>> isn't as bad as the Intel situation. This is because the AMD microcode
>> loader only attempts to look for the firmware on the boot_cpu and, if
>> found, loads the microcode on each cpu. This patch does the same for the
>> Intel microcode, and it obviously peeds up the module load if there is no
>> microcode update available.
>>
>> After making this change, the old microcode loading code and the new
>> loading code can be cleaned up and unified in the core code.
>>
>> This patch was tested on several systems (both AMD and Intel) with the
>> microcode in place and without, as well as on several different OSes.
>
> Does simply disabling CONFIG_FW_LOADER_USER_HELPER work without your
> patch?
>
> If yes, it's an infamous udev issue. An easier solution would be to
> create a function that does only the direct f/w loading without
> usermode helper, and call it in the microcode driver.

Thanks Takashi, I thought about doing something similar but didn't know if
!waiting was a good idea here. I'll give this a shot.

P.

>
> An untested quick fix patch is attached below.
>
>
> Takashi
>
> ---
> diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
> index af99f71..539a01a 100644
> --- a/arch/x86/kernel/microcode_amd.c
> +++ b/arch/x86/kernel/microcode_amd.c
> @@ -430,7 +430,7 @@ static enum ucode_state request_microcode_amd(int cpu, struct device *device,
> if (c->x86 >= 0x15)
> snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86);
>
> - if (request_firmware(&fw, (const char *)fw_name, device)) {
> + if (request_firmware_direct(&fw, (const char *)fw_name, device)) {
> pr_err("failed to load file %s\n", fw_name);
> goto out;
> }
> diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
> index 5fb2ceb..a276fa7 100644
> --- a/arch/x86/kernel/microcode_intel.c
> +++ b/arch/x86/kernel/microcode_intel.c
> @@ -278,7 +278,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device,
> sprintf(name, "intel-ucode/%02x-%02x-%02x",
> c->x86, c->x86_model, c->x86_mask);
>
> - if (request_firmware(&firmware, name, device)) {
> + if (request_firmware_direct(&firmware, name, device)) {
> pr_debug("data file %s load failed\n", name);
> return UCODE_NFOUND;
> }
> diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
> index 10a4467..f30f381 100644
> --- a/drivers/base/firmware_class.c
> +++ b/drivers/base/firmware_class.c
> @@ -1054,7 +1054,7 @@ static int assign_firmware_buf(struct firmware *fw, struct device *device,
> /* called from request_firmware() and request_firmware_work_func() */
> static int
> _request_firmware(const struct firmware **firmware_p, const char *name,
> - struct device *device, bool uevent, bool nowait)
> + struct device *device, bool uevent, bool nowait, bool fallback)
> {
> struct firmware *fw;
> long timeout;
> @@ -1086,7 +1086,7 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
> }
> }
>
> - if (!fw_get_filesystem_firmware(device, fw->priv))
> + if (!fw_get_filesystem_firmware(device, fw->priv) && fallback)
> ret = fw_load_from_user_helper(fw, name, device,
> uevent, nowait, timeout);
>
> @@ -1134,12 +1134,25 @@ request_firmware(const struct firmware **firmware_p, const char *name,
>
> /* Need to pin this module until return */
> __module_get(THIS_MODULE);
> - ret = _request_firmware(firmware_p, name, device, true, false);
> + ret = _request_firmware(firmware_p, name, device, true, false, true);
> module_put(THIS_MODULE);
> return ret;
> }
> EXPORT_SYMBOL(request_firmware);
>
> +#ifdef CONFIG_FW_LOADER_USER_HELPER
> +int request_firmware_direct(const struct firmware **firmware_p,
> + const char *name, struct device *device)
> +{
> + int ret;
> + __module_get(THIS_MODULE);
> + ret = _request_firmware(firmware_p, name, device, true, false, false);
> + module_put(THIS_MODULE);
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(request_firmware_direct);
> +#endif
> +
> /**
> * release_firmware: - release the resource associated with a firmware image
> * @fw: firmware resource to release
> @@ -1173,7 +1186,7 @@ static void request_firmware_work_func(struct work_struct *work)
> fw_work = container_of(work, struct firmware_work, work);
>
> _request_firmware(&fw, fw_work->name, fw_work->device,
> - fw_work->uevent, true);
> + fw_work->uevent, true, true);
> fw_work->cont(fw, fw_work->context);
> put_device(fw_work->device); /* taken in request_firmware_nowait() */
>
> diff --git a/include/linux/firmware.h b/include/linux/firmware.h
> index e154c10..5952933 100644
> --- a/include/linux/firmware.h
> +++ b/include/linux/firmware.h
> @@ -68,4 +68,11 @@ static inline void release_firmware(const struct firmware *fw)
>
> #endif
>
> +#ifdef CONFIG_FW_LOADER_USER_HELPER
> +int request_firmware_direct(const struct firmware **fw, const char *name,
> + struct device *device);
> +#else
> +#define request_firmware_direct request_firmware
> +#endif
> +
> #endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/