[RFC 0/4] DT support for rx51-audio

From: Sebastian Reichel
Date: Sun Oct 27 2013 - 17:25:10 EST


Hi,

This patchset adds DT support in rx51-audio. I tested it on the Nokia N900
and was able to play sound with aplay using earphones and earspeaker. The
Loudspeakers did not work. I don't know the reason.

The patchset consists of 4 patches:

1. convert rx51-audio to snd_soc_register_card()
2. init audio in rx51 platform file
3. add some DT helpers to ASoC core
4. add DT support to rx51-audio

Please note, that the patch is RFC level for now. For example non DT boot
does not work, because I did not yet add pdata in boardcode.

Proposed DTS node would look like this:

sound: rx51-audio {
compatible = "nokia,rx51-audio";

ti,mcbsp = <&mcbsp2>;
ti,codec = <&tlv320aic3x>;
ti,codec_aux = <&tlv320aic3x_aux>;
ti,headset_amp = <&tpa6130a2>;

tvout-selection-gpio = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
jack-detection-gpio = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
eci-sw-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
speaker-amp-gpio = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
};

-- Sebastian

Pali RohÃr (2):
ASoC: omap: rx51: Use snd_soc_register_card
ARM: OMAP: rx51: Register audio device

Sebastian Reichel (2):
ASoC: Allow Aux Codecs to be specified using DT
ASoC: RX-51: Add DT support to sound driver

.../devicetree/bindings/sound/nokia,rx51.txt | 28 +++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/mach-omap2/board-rx51-peripherals.c | 11 ++
include/sound/rx51.h | 18 ++
include/sound/soc.h | 13 +-
sound/soc/omap/omap-mcbsp.c | 5 +-
sound/soc/omap/omap-mcbsp.h | 2 +-
sound/soc/omap/rx51.c | 212 +++++++++++++++------
sound/soc/soc-core.c | 68 +++++--
9 files changed, 277 insertions(+), 81 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/nokia,rx51.txt
create mode 100644 include/sound/rx51.h

--
1.8.4.rc3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/