Re: [PATCHv6 1/3] Input: twl4030-pwrbutton - add device tree support

From: Peter Ujfalusi
Date: Fri Oct 25 2013 - 08:45:40 EST


On 10/24/2013 05:48 PM, Sebastian Reichel wrote:
> Add device tree support for twl4030 power button driver.
>
> Signed-off-by: Sebastian Reichel <sre@xxxxxxxxxx>
> ---
> .../devicetree/bindings/input/twl4030-pwrbutton.txt | 21 +++++++++++++++++++++
> drivers/input/misc/twl4030-pwrbutton.c | 16 ++++++++++++----
> 2 files changed, 33 insertions(+), 4 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
>
> diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
> new file mode 100644
> index 0000000..4375646
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
> @@ -0,0 +1,21 @@
> +Texas Instruments TWL family (twl4030) pwrbutton module
> +
> +This module is part of the TWL4030. For more details about the whole
> +chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
> +
> +This module provides a simple power button event via an Interrupt.
> +
> +Required properties:
> +- compatible: should be one of the following
> + - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
> +- interrupt: should be one of the following
> + - <8>: For controllers compatible with twl4030
> +
> +Example:
> +
> +&twl {
> + twl_pwrbutton: pwrbutton {
> + compatible = "ti,twl4030-pwrbutton";
> + interrupts = <8>;
> + };
> +};
> diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
> index b9a05fd..a3a0fe3 100644
> --- a/drivers/input/misc/twl4030-pwrbutton.c
> +++ b/drivers/input/misc/twl4030-pwrbutton.c
> @@ -52,7 +52,7 @@ static irqreturn_t powerbutton_irq(int irq, void *_pwr)
> return IRQ_HANDLED;
> }
>
> -static int __init twl4030_pwrbutton_probe(struct platform_device *pdev)
> +static int twl4030_pwrbutton_probe(struct platform_device *pdev)
> {
> struct input_dev *pwr;
> int irq = platform_get_irq(pdev, 0);
> @@ -106,16 +106,24 @@ static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#if IS_ENABLED(CONFIG_OF)

You don't need to do this.

> +static const struct of_device_id twl4030_pwrbutton_dt_match_table[] = {
> + { .compatible = "ti,twl4030-pwrbutton" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
> +#endif
> +
> static struct platform_driver twl4030_pwrbutton_driver = {
> + .probe = twl4030_pwrbutton_probe,
> .remove = __exit_p(twl4030_pwrbutton_remove),
> .driver = {
> .name = "twl4030_pwrbutton",
> .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(twl4030_pwrbutton_dt_match_table),

If you try to compile this driver with config !CONFIG_OF it will not work in
this way.

> },
> };
> -
> -module_platform_driver_probe(twl4030_pwrbutton_driver,
> - twl4030_pwrbutton_probe);
> +module_platform_driver(twl4030_pwrbutton_driver);
>
> MODULE_ALIAS("platform:twl4030_pwrbutton");
> MODULE_DESCRIPTION("Triton2 Power Button");
>


--
Péter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/