Re: [Patch V5] drivers: power: Add support for bq24735 charger

[Stephen Warren]

On 10/14/2013 12:26 PM, Rhyland Klein wrote:
> On 10/14/2013 2:21 PM, Stephen Warren wrote:
>> On 10/11/2013 03:15 PM, Rhyland Klein wrote:
>>> From: Darbha Sriharsha <dsriharsha@xxxxxxxxxx>
>>>
>>> Adds support for the bq24735 charger chipset. The bq24735 is a
>>> high-efficiency, synchronous battery charger.
>>>
>>> It allows control of the charging current, input current, and the charger
>>> voltage DAC's through SMBus.
>>
>> Please CC the DT bindings maintainers on patches that add DT bindings.
> 
> Oops, sorry, will do in the future.
> 
>>
>>> diff --git a/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power_supply/ti,bq24735.txt
>>
>>> +Optional properties :
>>
>>> + - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
>>> +   presence.
>>
>> Is that actually a property of the BQ24735 chip itself (i.e. is it an
>> output signal from the chip), or part of the board/system?
> 
> The gpio itself is actually what the IRQ line is tied to from the
> bq24735 -> tegra (in this case). In other words this is a Host GPIO that
> is configured as an input and connected to the bq24735.

Ok, so this is the ACOK output pin? In that case, it's fine. It might be
worth mentioning that explicitly though.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/