Re: [PATCH] omapdss: Add new panel driver for Topolly td028ttec1 LCD.

From: Belisko Marek
Date: Fri Oct 11 2013 - 04:59:40 EST


Hi Tomi,

On Fri, Oct 11, 2013 at 10:17 AM, Tomi Valkeinen <tomi.valkeinen@xxxxxx> wrote:
> On 11/10/13 10:42, Dr. H. Nikolaus Schaller wrote:
>
>> I am not sure if there is a SPI driver for a McBSP port [1]? And to make that
>> work (reliably) and tested it might need a lot of work for us. At least I think
>> such a change (e.g. setting up clock polarity etc.) is not done in some minutes.
>> And the only feedback we have from the panel is "does not work"/"works". I.e.
>> if we are not lucky that it works immediately we have no real means to debug.
>>
>> IMHO it also gives more flexibility to board designers to choose GPIOs instead
>> of enforcing some SPI interface by the driver (and encapsulate this arguable
>> protocol in the driver). Maybe some board has 3 spare GPIOs but neither
>> McBSPs nor McSPIs available.
>
> This has been an interesting thread, I've learnt a lot =).
>
> I still think the panel driver should not handle this, but there should
> be a separate spi bitbang driver for it.
>
> I understand you're not enthusiastic going that way, as the current
> version works for you. However, when using DT, we need to think how to
> represent the hardware in the device tree data, and it has to be right
> from the beginning.
>
> That's why I won't allow representing this panel as having 4 gpios in
> the DT data, because that is not correct. The panel has 3 pins. But
> then, the panel does allow reading, which could be implemented using 4
> gpios as you have done. This data should be in the spi-bitbang data, and
> the panel should just use the standard SPI framework.
I disagree. There are different drivers which pass in platform data
gpios (encoder-tfp410.c or encoder-tpd12s015.c)
and those must be covered by DT then. I cannot see problem why to have
for td028 panel 3 or 4 gpios defined in DT.
>
> Using SPI framework does not mean you should use McBSP or McSPI. It's up
> to you how the 3-wire SPI is implemented on the SoC side, the panel
> would just work in all the cases.
>
> Tomi
>
>

BR,

marek

--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/