Re: [PATCH 4/6] pinctrl: single: Add support for wake-up interrupts
From: Tony Lindgren
Date: Thu Oct 10 2013 - 12:00:33 EST
* Roger Quadros <rogerq@xxxxxx> [131010 06:32]:
>
> I tried testing this with the USB EHCI driver, but I'm not getting wake up interrupts
> while the system is still running and only the EHCI controller is runtime suspended.
>
> It seems we need to somehow call _reconfigure_io_chain() to update the daisy chain
> whenever the pad wakeup_enable bit is changed.
Sounds like this is on omap3? Have you tried calling pcs_soc->rearm() in the
pcs_irq_handle() like the comments there suggest? At least for me that keeps
the wake-up interrupts continuously running on omap3 instead of just idle modes.
Now on omap4, I've noticed the wake up interrupts are on all the time based on tests
with the serial driver.
> I think pcs_irq_set_wake() is where need to control system wakeup behaviour for the irq.
> This is where we should be able to change WAKEUP_EN bit of the pad
> to enable/disable system wakeup for that pad and also call _reconfigure_io_chain().
Well the irq_set_wake() should only be needed for suspend and resume. For runtime PM
the wake-events should be always enabled by default as pointed out by Alan Stern
a while back.
> This would mean that we don't really need to set WAKEUP_EN for the pads in the DTS file.
Well for runtime PM, we should also do the automatic handling if configured.
But how to do that best is still open..
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/