Re: [PATCH 0/63] Basic scheduler support for automatic NUMAbalancing V9
From: Ingo Molnar
Date: Wed Oct 09 2013 - 12:30:01 EST
full crashlog attached.
Ingo
Linux version 3.12.0-rc4-01668-gfd71a04-dirty (mingo@earth5) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #229484 Wed Oct 9 16:59:58 CEST 2013
KERNEL supported cpus:
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
CPU: vendor_id 'AuthenticAMD' unknown, using generic init.
CPU: Your system may be unstable.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS
BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
console [earlyser0] enabled
debug: ignoring loglevel setting.
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x037fffff]
Base memory trampoline at [b009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x3f800000-0x3fbfffff]
[mem 0x3f800000-0x3fbfffff] page 4k
BRK [0x0335b000, 0x0335bfff] PGTABLE
init_memory_mapping: [mem 0x38000000-0x3f7fffff]
[mem 0x38000000-0x3f7fffff] page 4k
BRK [0x0335c000, 0x0335cfff] PGTABLE
BRK [0x0335d000, 0x0335dfff] PGTABLE
BRK [0x0335e000, 0x0335efff] PGTABLE
BRK [0x0335f000, 0x0335ffff] PGTABLE
BRK [0x03360000, 0x03360fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x37ffffff]
[mem 0x00100000-0x37ffffff] page 4k
init_memory_mapping: [mem 0x3fc00000-0x3ffeffff]
[mem 0x3fc00000-0x3ffeffff] page 4k
0MB HIGHMEM available.
1023MB LOWMEM available.
mapped low ram: 0 - 3fff0000
low ram: 0 - 3fff0000
Zone ranges:
Normal [mem 0x00001000-0x3ffeffff]
HighMem empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x3ffeffff]
On node 0 totalpages: 262030
free_area_init_node: node 0, pgdat b2cac760, node_mem_map ef214024
Normal zone: 2304 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 262030 pages, LIFO batch:31
Using APIC driver default
SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
No local APIC present or hardware disabled
APIC: disable apic facility
APIC: switched to apic NOOP
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic_noop.c:113 noop_apic_read+0x29/0x3f()
CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0-rc4-01668-gfd71a04-dirty #229484
b286bb7c b2b4def8 b235a604 b2b4df28 b1028784 b286ec98 00000000 00000000
b286bb7c 00000071 b1015bba b1015bba 00000071 00000000 b2dc0000 b2b4df38
b102882f 00000009 00000000 b2b4df40 b1015bba b2b4df48 b10142e8 b2b4df58
Call Trace:
[<b235a604>] dump_stack+0x16/0x18
[<b1028784>] warn_slowpath_common+0x73/0x89
[<b1015bba>] ? noop_apic_read+0x29/0x3f
[<b102882f>] warn_slowpath_null+0x1d/0x1f
[<b1015bba>] noop_apic_read+0x29/0x3f
[<b10142e8>] read_apic_id+0x14/0x1f
[<b2d0ed8d>] init_apic_mappings+0xea/0x140
[<b2d080f3>] setup_arch+0xa45/0xab3
[<b23557b4>] ? printk+0x38/0x3a
[<b2d057e7>] start_kernel+0xb9/0x354
[<b2d05384>] i386_start_kernel+0x12e/0x131
---[ end trace a7919e7f17c0a725 ]---
nr_irqs_gsi: 16
e820: [mem 0x40000000-0xdfffffff] available for PCI devices
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259726
Kernel command line: root=/dev/sda1 earlyprintk=ttyS0,115200,keep console=ttyS0,115200 debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 3
sysrq: sysrq always enabled.
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 1000788K/1048120K available (19921K kernel code, 1764K rwdata, 8020K rodata, 732K init, 5700K bss, 47332K reserved, 0K highmem)
virtual kernel memory layout:
fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf07f0000 - 0xff7fe000 ( 240 MB)
lowmem : 0xb0000000 - 0xefff0000 (1023 MB)
.init : 0xb2d05000 - 0xb2dbc000 ( 732 kB)
.data : 0xb237475f - 0xb2d040e0 (9790 kB)
.text : 0xb1000000 - 0xb237475f (19921 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
NR_IRQS:2304 nr_irqs:256 16
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic_noop.c:119 noop_apic_write+0x26/0x3b()
CPU: 0 PID: 0 Comm: swapper Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484
b286bb7c b2b4df4c b235a604 b2b4df7c b1028784 b286ec98 00000000 00000000
b286bb7c 00000077 b1015b7c b1015b7c 00000077 b2d91900 b2b54460 b2b4df8c
b102882f 00000009 00000000 b2b4df94 b1015b7c b2b4df9c b2d0eb47 b2b4dfb4
Call Trace:
[<b235a604>] dump_stack+0x16/0x18
[<b1028784>] warn_slowpath_common+0x73/0x89
[<b1015b7c>] ? noop_apic_write+0x26/0x3b
[<b102882f>] warn_slowpath_null+0x1d/0x1f
[<b1015b7c>] noop_apic_write+0x26/0x3b
[<b2d0eb47>] init_bsp_APIC+0x64/0xb4
[<b2d081bc>] init_ISA_irqs+0x16/0x46
[<b2d0821c>] native_init_IRQ+0xa/0x1ae
[<b2d08210>] init_IRQ+0x24/0x26
[<b2d0591f>] start_kernel+0x1f1/0x354
[<b2d054d3>] ? repair_env_string+0x5e/0x5e
[<b2d05384>] i386_start_kernel+0x12e/0x131
---[ end trace a7919e7f17c0a726 ]---
CPU 0 irqstacks, hard=b008c000 soft=b008e000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 3551 kB
per task-struct memory footprint: 1152 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: A-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-B-A deadlock: A-B-B-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-B-C-C-A deadlock: A-B-B-C-C-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-C-A-B-C deadlock: A-B-C-A-B-C deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-B-C-C-D-D-A deadlock: A-B-B-C-C-D-D-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-C-D-B-D-D-A deadlock: A-B-C-D-B-D-D-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
A-B-C-D-B-C-D-A deadlock: A-B-C-D-B-C-D-A deadlock:failed|failed|failed|failed| ok | ok |failed|failed|failed|failed|failed|failed|
double unlock: double unlock: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
initialize held: initialize held: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
bad unlock order: bad unlock order: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: recursive read-lock: | | ok | ok | | |failed|failed|
recursive read-lock #2: recursive read-lock #2: | | ok | ok | | |failed|failed|
mixed read-write-lock: mixed read-write-lock: | |failed|failed| | |failed|failed|
mixed write-read-lock: mixed write-read-lock: | |failed|failed| | |failed|failed|
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12: hard-irqs-on + irq-safe-A/12:failed|failed|failed|failed| ok | ok |
soft-irqs-on + irq-safe-A/12: soft-irqs-on + irq-safe-A/12:failed|failed|failed|failed| ok | ok |
hard-irqs-on + irq-safe-A/21: hard-irqs-on + irq-safe-A/21:failed|failed|failed|failed| ok | ok |
soft-irqs-on + irq-safe-A/21: soft-irqs-on + irq-safe-A/21:failed|failed|failed|failed| ok | ok |
sirq-safe-A => hirqs-on/12: sirq-safe-A => hirqs-on/12:failed|failed|failed|failed| ok | ok |
sirq-safe-A => hirqs-on/21: sirq-safe-A => hirqs-on/21:failed|failed|failed|failed| ok | ok |
hard-safe-A + irqs-on/12: hard-safe-A + irqs-on/12:failed|failed|failed|failed| ok | ok |
soft-safe-A + irqs-on/12: soft-safe-A + irqs-on/12:failed|failed|failed|failed| ok | ok |
hard-safe-A + irqs-on/21: hard-safe-A + irqs-on/21:failed|failed|failed|failed| ok | ok |
soft-safe-A + irqs-on/21: soft-safe-A + irqs-on/21:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/123: hard-safe-A + unsafe-B #1/123:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/123: soft-safe-A + unsafe-B #1/123:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/132: hard-safe-A + unsafe-B #1/132:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/132: soft-safe-A + unsafe-B #1/132:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/213: hard-safe-A + unsafe-B #1/213:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/213: soft-safe-A + unsafe-B #1/213:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/231: hard-safe-A + unsafe-B #1/231:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/231: soft-safe-A + unsafe-B #1/231:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/312: hard-safe-A + unsafe-B #1/312:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/312: soft-safe-A + unsafe-B #1/312:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #1/321: hard-safe-A + unsafe-B #1/321:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #1/321: soft-safe-A + unsafe-B #1/321:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/123: hard-safe-A + unsafe-B #2/123:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/123: soft-safe-A + unsafe-B #2/123:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/132: hard-safe-A + unsafe-B #2/132:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/132: soft-safe-A + unsafe-B #2/132:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/213: hard-safe-A + unsafe-B #2/213:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/213: soft-safe-A + unsafe-B #2/213:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/231: hard-safe-A + unsafe-B #2/231:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/231: soft-safe-A + unsafe-B #2/231:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/312: hard-safe-A + unsafe-B #2/312:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/312: soft-safe-A + unsafe-B #2/312:failed|failed|failed|failed| ok | ok |
hard-safe-A + unsafe-B #2/321: hard-safe-A + unsafe-B #2/321:failed|failed|failed|failed| ok | ok |
soft-safe-A + unsafe-B #2/321: soft-safe-A + unsafe-B #2/321:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/123: hard-irq lock-inversion/123:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/123: soft-irq lock-inversion/123:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/132: hard-irq lock-inversion/132:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/132: soft-irq lock-inversion/132:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/213: hard-irq lock-inversion/213:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/213: soft-irq lock-inversion/213:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/231: hard-irq lock-inversion/231:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/231: soft-irq lock-inversion/231:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/312: hard-irq lock-inversion/312:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/312: soft-irq lock-inversion/312:failed|failed|failed|failed| ok | ok |
hard-irq lock-inversion/321: hard-irq lock-inversion/321:failed|failed|failed|failed| ok | ok |
soft-irq lock-inversion/321: soft-irq lock-inversion/321:failed|failed|failed|failed| ok | ok |
hard-irq read-recursion/123: hard-irq read-recursion/123: ok | ok |
soft-irq read-recursion/123: soft-irq read-recursion/123: ok | ok |
hard-irq read-recursion/132: hard-irq read-recursion/132: ok | ok |
soft-irq read-recursion/132: soft-irq read-recursion/132: ok | ok |
hard-irq read-recursion/213: hard-irq read-recursion/213: ok | ok |
soft-irq read-recursion/213: soft-irq read-recursion/213: ok | ok |
hard-irq read-recursion/231: hard-irq read-recursion/231: ok | ok |
soft-irq read-recursion/231: soft-irq read-recursion/231: ok | ok |
hard-irq read-recursion/312: hard-irq read-recursion/312: ok | ok |
soft-irq read-recursion/312: soft-irq read-recursion/312: ok | ok |
hard-irq read-recursion/321: hard-irq read-recursion/321: ok | ok |
soft-irq read-recursion/321: soft-irq read-recursion/321: ok | ok |
--------------------------------------------------------------------------
| Wound/wait tests |
---------------------
ww api failures: ww api failures: ok | ok | ok | ok | ok | ok |
ww contexts mixing: ww contexts mixing:failed|failed| ok | ok |
finishing ww context: finishing ww context: ok | ok | ok | ok | ok | ok | ok | ok |
locking mismatches: locking mismatches: ok | ok | ok | ok | ok | ok |
EDEADLK handling: EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
spinlock nest unlocked: spinlock nest unlocked: ok | ok |
-----------------------------------------------------
|block | try |context|
-----------------------------------------------------
context: context:failed|failed| ok | ok | ok | ok |
try: try:failed|failed| ok | ok |failed|failed|
block: block:failed|failed| ok | ok |failed|failed|
spinlock: spinlock:failed|failed| ok | ok |failed|failed|
--------------------------------------------------------
141 out of 253 testcases failed, as expected. |
----------------------------------------------------
tsc: Fast TSC calibration using PIT
tsc: Detected 2010.210 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.42 BogoMIPS (lpj=2010210)
4020.42 BogoMIPS (lpj=2010210)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
mce: CPU supports 5 MCE banks
mce: unknown CPU type - not enabling MCE support
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: -1
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: -1
CPU: CPU: AuthenticAMD AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (fam: 0f, model: 23 (fam: 0f, model: 23, stepping: 02)
, stepping: 02)
calling set_real_mode_permissions+0x0/0x7c @ 1
initcall set_real_mode_permissions+0x0/0x7c returned 0 after 0 usecs
calling trace_init_flags_sys_exit+0x0/0x11 @ 1
initcall trace_init_flags_sys_exit+0x0/0x11 returned 0 after 0 usecs
calling trace_init_flags_sys_enter+0x0/0x11 @ 1
initcall trace_init_flags_sys_enter+0x0/0x11 returned 0 after 0 usecs
calling init_hw_perf_events+0x0/0x4bb @ 1
Performance Events: Performance Events: no PMU driver, software events only.
no PMU driver, software events only.
initcall init_hw_perf_events+0x0/0x4bb returned 0 after 1953 usecs
calling register_trigger_all_cpu_backtrace+0x0/0x13 @ 1
initcall register_trigger_all_cpu_backtrace+0x0/0x13 returned 0 after 0 usecs
calling spawn_ksoftirqd+0x0/0x17 @ 1
initcall spawn_ksoftirqd+0x0/0x17 returned 0 after 0 usecs
calling init_workqueues+0x0/0x2cf @ 1
initcall init_workqueues+0x0/0x2cf returned 0 after 0 usecs
calling relay_init+0x0/0x7 @ 1
initcall relay_init+0x0/0x7 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x18c @ 1
initcall tracer_alloc_buffers+0x0/0x18c returned 0 after 976 usecs
calling init_events+0x0/0x5d @ 1
initcall init_events+0x0/0x5d returned 0 after 0 usecs
calling init_trace_printk+0x0/0x7 @ 1
initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs
calling event_trace_memsetup+0x0/0x5a @ 1
initcall event_trace_memsetup+0x0/0x5a returned 0 after 0 usecs
calling init_ftrace_syscalls+0x0/0x5e @ 1
initcall init_ftrace_syscalls+0x0/0x5e returned 0 after 976 usecs
calling dynamic_debug_init+0x0/0x22c @ 1
initcall dynamic_debug_init+0x0/0x22c returned 0 after 2929 usecs
enabled ExtINT on CPU#0
No ESR for 82489DX.
Using local APIC timer interrupts.
calibrating APIC timer ...
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/time/clockevents.c:49 clockevent_delta2ns+0x53/0xb7()
CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484
b2879283 b2879283 b010dedc b010dedc b235a604 b235a604 b010df0c b010df0c b1028784 b1028784 b286ec98 b286ec98 00000000 00000000 00000001 00000001
b2879283 b2879283 00000031 00000031 b10613a9 b10613a9 b10613a9 b10613a9 00000031 00000031 00000000 00000000 b2b5a120 b2b5a120 b010df1c b010df1c
b102882f b102882f 00000009 00000009 00000000 00000000 b010df34 b010df34 b10613a9 b10613a9 00000000 00000000 00000000 00000000 7fffffff 7fffffff
Call Trace:
[<b235a604>] dump_stack+0x16/0x18
[<b1028784>] warn_slowpath_common+0x73/0x89
[<b10613a9>] ? clockevent_delta2ns+0x53/0xb7
[<b102882f>] warn_slowpath_null+0x1d/0x1f
[<b10613a9>] clockevent_delta2ns+0x53/0xb7
[<b2d0e6fe>] setup_boot_APIC_clock+0x1e4/0x3d1
[<b2d0ef11>] APIC_init_uniprocessor+0xef/0xfb
[<b2d05c2a>] kernel_init_freeable+0x5a/0x178
[<b1047d39>] ? finish_task_switch.constprop.64+0x28/0x9d
[<b2350e9e>] kernel_init+0xb/0xc3
[<b23735d7>] ret_from_kernel_thread+0x1b/0x28
[<b2350e93>] ? rest_init+0xb7/0xb7
---[ end trace a7919e7f17c0a727 ]---
..... delta 0
..... mult: 1
..... calibration result: 0
..... CPU clock speed is 2009.0995 MHz.
..... host bus clock speed is 0.0000 MHz.
APIC frequency too slow, disabling apic timer
devtmpfs: initialized
calling init_mmap_min_addr+0x0/0x11 @ 1
initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
calling net_ns_init+0x0/0x142 @ 1
initcall net_ns_init+0x0/0x142 returned 0 after 0 usecs
calling reboot_init+0x0/0x7 @ 1
initcall reboot_init+0x0/0x7 returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x1e @ 1
initcall init_lapic_sysfs+0x0/0x1e returned 0 after 0 usecs
calling wq_sysfs_init+0x0/0x11 @ 1
initcall wq_sysfs_init+0x0/0x11 returned 0 after 0 usecs
calling ksysfs_init+0x0/0x7a @ 1
initcall ksysfs_init+0x0/0x7a returned 0 after 0 usecs
calling pm_init+0x0/0x7a @ 1
initcall pm_init+0x0/0x7a returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0xf @ 1
initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
calling init_wakeup_tracer+0x0/0x1d @ 1
initcall init_wakeup_tracer+0x0/0x1d returned 0 after 0 usecs
calling event_trace_enable+0x0/0xf1 @ 1
initcall event_trace_enable+0x0/0xf1 returned 0 after 2929 usecs
calling init_zero_pfn+0x0/0x25 @ 1
initcall init_zero_pfn+0x0/0x25 returned 0 after 0 usecs
calling memory_failure_init+0x0/0x91 @ 1
initcall memory_failure_init+0x0/0x91 returned 0 after 0 usecs
calling fsnotify_init+0x0/0x2c @ 1
initcall fsnotify_init+0x0/0x2c returned 0 after 0 usecs
calling filelock_init+0x0/0x48 @ 1
initcall filelock_init+0x0/0x48 returned 0 after 0 usecs
calling init_aout_binfmt+0x0/0x13 @ 1
initcall init_aout_binfmt+0x0/0x13 returned 0 after 0 usecs
calling init_misc_binfmt+0x0/0x28 @ 1
initcall init_misc_binfmt+0x0/0x28 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x13 @ 1
initcall init_elf_binfmt+0x0/0x13 returned 0 after 0 usecs
calling debugfs_init+0x0/0x4c @ 1
initcall debugfs_init+0x0/0x4c returned 0 after 0 usecs
calling securityfs_init+0x0/0x43 @ 1
initcall securityfs_init+0x0/0x43 returned 0 after 0 usecs
calling calibrate_xor_blocks+0x0/0x189 @ 1
xor: measuring software checksum speed
pIII_sse : 3716.000 MB/sec
prefetch64-sse: 4840.000 MB/sec
xor: using function: prefetch64-sse (4840.000 MB/sec)
initcall calibrate_xor_blocks+0x0/0x189 returned 0 after 23437 usecs
calling prandom_init+0x0/0x85 @ 1
initcall prandom_init+0x0/0x85 returned 0 after 0 usecs
calling test_atomic64+0x0/0x629 @ 1
atomic64 test passed for i386+ platform with CX8 and with SSE
initcall test_atomic64+0x0/0x629 returned 0 after 976 usecs
calling sfi_sysfs_init+0x0/0xc3 @ 1
initcall sfi_sysfs_init+0x0/0xc3 returned 0 after 0 usecs
calling virtio_init+0x0/0x22 @ 1
initcall virtio_init+0x0/0x22 returned 0 after 0 usecs
calling regulator_init+0x0/0x69 @ 1
regulator-dummy: no parameters
initcall regulator_init+0x0/0x69 returned 0 after 976 usecs
calling early_resume_init+0x0/0x1c3 @ 1
RTC time: 20:27:31, date: 10/05/13
initcall early_resume_init+0x0/0x1c3 returned 0 after 976 usecs
calling bsp_pm_check_init+0x0/0x11 @ 1
initcall bsp_pm_check_init+0x0/0x11 returned 0 after 0 usecs
calling sock_init+0x0/0x89 @ 1
initcall sock_init+0x0/0x89 returned 0 after 0 usecs
calling netpoll_init+0x0/0x39 @ 1
initcall netpoll_init+0x0/0x39 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x197 @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x197 returned 0 after 976 usecs
calling olpc_init+0x0/0xfc @ 1
initcall olpc_init+0x0/0xfc returned 0 after 0 usecs
calling bdi_class_init+0x0/0x3c @ 1
initcall bdi_class_init+0x0/0x3c returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0xf @ 1
initcall kobject_uevent_init+0x0/0xf returned 0 after 976 usecs
calling gpiolib_sysfs_init+0x0/0x78 @ 1
initcall gpiolib_sysfs_init+0x0/0x78 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x14 @ 1
initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs
calling pci_driver_init+0x0/0xf @ 1
initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
calling backlight_class_init+0x0/0x4c @ 1
initcall backlight_class_init+0x0/0x4c returned 0 after 0 usecs
calling video_output_class_init+0x0/0x14 @ 1
initcall video_output_class_init+0x0/0x14 returned 0 after 0 usecs
calling anatop_regulator_init+0x0/0x11 @ 1
initcall anatop_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling tty_class_init+0x0/0x2b @ 1
initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xc9 @ 1
initcall vtconsole_class_init+0x0/0xc9 returned 0 after 976 usecs
calling wakeup_sources_debugfs_init+0x0/0x2f @ 1
initcall wakeup_sources_debugfs_init+0x0/0x2f returned 0 after 0 usecs
calling regmap_initcall+0x0/0xc @ 1
initcall regmap_initcall+0x0/0xc returned 0 after 0 usecs
calling syscon_init+0x0/0x11 @ 1
initcall syscon_init+0x0/0x11 returned 0 after 0 usecs
calling hsi_init+0x0/0xf @ 1
initcall hsi_init+0x0/0xf returned 0 after 976 usecs
calling i2c_init+0x0/0x35 @ 1
initcall i2c_init+0x0/0x35 returned 0 after 0 usecs
calling arch_kdebugfs_init+0x0/0x2b4 @ 1
initcall arch_kdebugfs_init+0x0/0x2b4 returned 0 after 0 usecs
calling init_pit_clocksource+0x0/0x15 @ 1
initcall init_pit_clocksource+0x0/0x15 returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x56 @ 1
initcall mtrr_if_init+0x0/0x56 returned 0 after 0 usecs
calling kdump_buf_page_init+0x0/0x38 @ 1
initcall kdump_buf_page_init+0x0/0x38 returned 0 after 0 usecs
calling olpc_ec_init_module+0x0/0x11 @ 1
initcall olpc_ec_init_module+0x0/0x11 returned 0 after 0 usecs
calling pci_arch_init+0x0/0x55 @ 1
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x55 returned 0 after 1953 usecs
calling topology_init+0x0/0x13 @ 1
Missing cpus node, bailing out
initcall topology_init+0x0/0x13 returned 0 after 976 usecs
calling mtrr_init_finialize+0x0/0x30 @ 1
initcall mtrr_init_finialize+0x0/0x30 returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x2be @ 1
initcall param_sysfs_init+0x0/0x2be returned 0 after 37109 usecs
calling pm_sysrq_init+0x0/0x16 @ 1
initcall pm_sysrq_init+0x0/0x16 returned 0 after 0 usecs
calling default_bdi_init+0x0/0x78 @ 1
initcall default_bdi_init+0x0/0x78 returned 0 after 0 usecs
calling init_bio+0x0/0xee @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xee returned 0 after 976 usecs
calling fsnotify_notification_init+0x0/0x9c @ 1
initcall fsnotify_notification_init+0x0/0x9c returned 0 after 0 usecs
calling cryptomgr_init+0x0/0xf @ 1
initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
calling cryptd_init+0x0/0x80 @ 1
initcall cryptd_init+0x0/0x80 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x1d @ 1
initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2f @ 1
initcall blk_ioc_init+0x0/0x2f returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x2a @ 1
initcall blk_softirq_init+0x0/0x2a returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x2a @ 1
initcall blk_iopoll_setup+0x0/0x2a returned 0 after 0 usecs
calling genhd_device_init+0x0/0x6a @ 1
initcall genhd_device_init+0x0/0x6a returned 0 after 0 usecs
calling blk_dev_integrity_init+0x0/0x2f @ 1
initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 usecs
calling raid6_select_algo+0x0/0x1e9 @ 1
raid6: mmxx1 1648 MB/s
raid6: mmxx2 2992 MB/s
raid6: sse1x1 464 MB/s
raid6: sse1x2 757 MB/s
raid6: sse2x1 777 MB/s
raid6: sse2x2 1312 MB/s
raid6: int32x1 347 MB/s
raid6: int32x2 546 MB/s
raid6: int32x4 718 MB/s
raid6: int32x8 714 MB/s
raid6: using algorithm mmxx2 (2992 MB/s)
raid6: using intx1 recovery algorithm
initcall raid6_select_algo+0x0/0x1e9 returned 0 after 177734 usecs
calling gpiolib_debugfs_init+0x0/0x2a @ 1
initcall gpiolib_debugfs_init+0x0/0x2a returned 0 after 0 usecs
calling max7300_init+0x0/0x11 @ 1
initcall max7300_init+0x0/0x11 returned 0 after 0 usecs
calling max732x_init+0x0/0x11 @ 1
initcall max732x_init+0x0/0x11 returned 0 after 0 usecs
calling mcp23s08_init+0x0/0x11 @ 1
initcall mcp23s08_init+0x0/0x11 returned 0 after 0 usecs
calling pca953x_init+0x0/0x11 @ 1
initcall pca953x_init+0x0/0x11 returned 0 after 0 usecs
calling pcf857x_init+0x0/0x11 @ 1
initcall pcf857x_init+0x0/0x11 returned 0 after 0 usecs
calling sx150x_init+0x0/0x11 @ 1
initcall sx150x_init+0x0/0x11 returned 0 after 0 usecs
calling tc3589x_gpio_init+0x0/0x11 @ 1
initcall tc3589x_gpio_init+0x0/0x11 returned 0 after 0 usecs
calling gpio_twl4030_init+0x0/0x11 @ 1
initcall gpio_twl4030_init+0x0/0x11 returned 0 after 0 usecs
calling wm8350_gpio_init+0x0/0x11 @ 1
initcall wm8350_gpio_init+0x0/0x11 returned 0 after 0 usecs
calling pwm_debugfs_init+0x0/0x2a @ 1
initcall pwm_debugfs_init+0x0/0x2a returned 0 after 0 usecs
calling pwm_sysfs_init+0x0/0x14 @ 1
initcall pwm_sysfs_init+0x0/0x14 returned 0 after 0 usecs
calling pci_slot_init+0x0/0x3d @ 1
initcall pci_slot_init+0x0/0x3d returned 0 after 0 usecs
calling fbmem_init+0x0/0x96 @ 1
initcall fbmem_init+0x0/0x96 returned 0 after 0 usecs
calling pnp_init+0x0/0xf @ 1
initcall pnp_init+0x0/0xf returned 0 after 0 usecs
calling regulator_fixed_voltage_init+0x0/0x11 @ 1
initcall regulator_fixed_voltage_init+0x0/0x11 returned 0 after 0 usecs
calling pm8607_regulator_init+0x0/0x11 @ 1
initcall pm8607_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling ad5398_init+0x0/0x11 @ 1
initcall ad5398_init+0x0/0x11 returned 0 after 0 usecs
calling as3711_regulator_init+0x0/0x11 @ 1
initcall as3711_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling da903x_regulator_init+0x0/0x11 @ 1
initcall da903x_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling gpio_regulator_init+0x0/0x11 @ 1
initcall gpio_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling isl6271a_init+0x0/0x11 @ 1
initcall isl6271a_init+0x0/0x11 returned 0 after 0 usecs
calling lp3972_module_init+0x0/0x11 @ 1
initcall lp3972_module_init+0x0/0x11 returned 0 after 0 usecs
calling lp8755_init+0x0/0x11 @ 1
initcall lp8755_init+0x0/0x11 returned 0 after 0 usecs
calling max1586_pmic_init+0x0/0x11 @ 1
initcall max1586_pmic_init+0x0/0x11 returned 0 after 0 usecs
calling max8649_init+0x0/0x11 @ 1
initcall max8649_init+0x0/0x11 returned 0 after 0 usecs
calling max8660_init+0x0/0x11 @ 1
initcall max8660_init+0x0/0x11 returned 0 after 0 usecs
calling max8998_pmic_init+0x0/0x11 @ 1
initcall max8998_pmic_init+0x0/0x11 returned 0 after 0 usecs
calling tps51632_init+0x0/0x11 @ 1
initcall tps51632_init+0x0/0x11 returned 0 after 0 usecs
calling pcf50633_regulator_init+0x0/0x11 @ 1
initcall pcf50633_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling tps6105x_regulator_init+0x0/0x11 @ 1
initcall tps6105x_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling tps62360_init+0x0/0x11 @ 1
initcall tps62360_init+0x0/0x11 returned 0 after 0 usecs
calling tps_65023_init+0x0/0x11 @ 1
initcall tps_65023_init+0x0/0x11 returned 0 after 0 usecs
calling tps65090_regulator_init+0x0/0x11 @ 1
initcall tps65090_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling tps65217_regulator_init+0x0/0x11 @ 1
initcall tps65217_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling tps65910_init+0x0/0x11 @ 1
initcall tps65910_init+0x0/0x11 returned 0 after 0 usecs
calling twlreg_init+0x0/0x11 @ 1
initcall twlreg_init+0x0/0x11 returned 0 after 0 usecs
calling wm831x_dcdc_init+0x0/0x8a @ 1
initcall wm831x_dcdc_init+0x0/0x8a returned 0 after 0 usecs
calling wm831x_isink_init+0x0/0x30 @ 1
initcall wm831x_isink_init+0x0/0x30 returned 0 after 0 usecs
calling wm831x_ldo_init+0x0/0x6a @ 1
initcall wm831x_ldo_init+0x0/0x6a returned 0 after 0 usecs
calling wm8350_regulator_init+0x0/0x11 @ 1
initcall wm8350_regulator_init+0x0/0x11 returned 0 after 0 usecs
calling misc_init+0x0/0xad @ 1
initcall misc_init+0x0/0xad returned 0 after 0 usecs
calling tifm_init+0x0/0x8c @ 1
initcall tifm_init+0x0/0x8c returned 0 after 0 usecs
calling pm860x_i2c_init+0x0/0x30 @ 1
initcall pm860x_i2c_init+0x0/0x30 returned 0 after 0 usecs
calling pm800_i2c_init+0x0/0x11 @ 1
initcall pm800_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling tc3589x_init+0x0/0x11 @ 1
initcall tc3589x_init+0x0/0x11 returned 0 after 0 usecs
calling wm8400_module_init+0x0/0x30 @ 1
initcall wm8400_module_init+0x0/0x30 returned 0 after 0 usecs
calling wm831x_i2c_init+0x0/0x30 @ 1
initcall wm831x_i2c_init+0x0/0x30 returned 0 after 0 usecs
calling wm8350_i2c_init+0x0/0x11 @ 1
initcall wm8350_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling tps6105x_init+0x0/0x11 @ 1
initcall tps6105x_init+0x0/0x11 returned 0 after 0 usecs
calling tps6507x_i2c_init+0x0/0x11 @ 1
initcall tps6507x_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling tps65217_init+0x0/0x11 @ 1
initcall tps65217_init+0x0/0x11 returned 0 after 0 usecs
calling tps65910_i2c_init+0x0/0x11 @ 1
initcall tps65910_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling da903x_init+0x0/0x11 @ 1
initcall da903x_init+0x0/0x11 returned 0 after 0 usecs
calling lp8788_init+0x0/0x11 @ 1
initcall lp8788_init+0x0/0x11 returned 0 after 0 usecs
calling max77693_i2c_init+0x0/0x11 @ 1
initcall max77693_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling max8998_i2c_init+0x0/0x11 @ 1
initcall max8998_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling pcf50633_init+0x0/0x11 @ 1
initcall pcf50633_init+0x0/0x11 returned 0 after 0 usecs
calling tps65090_init+0x0/0x11 @ 1
initcall tps65090_init+0x0/0x11 returned 0 after 0 usecs
calling lm3533_i2c_init+0x0/0x11 @ 1
initcall lm3533_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling as3711_i2c_init+0x0/0x11 @ 1
initcall as3711_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling init_scsi+0x0/0x80 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x80 returned 0 after 976 usecs
calling ata_init+0x0/0x2a1 @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x2a1 returned 0 after 976 usecs
calling phy_init+0x0/0x28 @ 1
initcall phy_init+0x0/0x28 returned 0 after 0 usecs
calling init_pcmcia_cs+0x0/0x32 @ 1
initcall init_pcmcia_cs+0x0/0x32 returned 0 after 0 usecs
calling usb_init+0x0/0x146 @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x146 returned 0 after 3906 usecs
calling usb_phy_gen_xceiv_init+0x0/0x11 @ 1
initcall usb_phy_gen_xceiv_init+0x0/0x11 returned 0 after 0 usecs
calling usb_udc_init+0x0/0x45 @ 1
initcall usb_udc_init+0x0/0x45 returned 0 after 0 usecs
calling serio_init+0x0/0x2e @ 1
initcall serio_init+0x0/0x2e returned 0 after 0 usecs
calling gameport_init+0x0/0x2e @ 1
initcall gameport_init+0x0/0x2e returned 0 after 0 usecs
calling input_init+0x0/0xf9 @ 1
initcall input_init+0x0/0xf9 returned 0 after 0 usecs
calling tca6416_keypad_init+0x0/0x11 @ 1
initcall tca6416_keypad_init+0x0/0x11 returned 0 after 0 usecs
calling tca8418_keypad_init+0x0/0x11 @ 1
initcall tca8418_keypad_init+0x0/0x11 returned 0 after 0 usecs
calling rtc_init+0x0/0x44 @ 1
initcall rtc_init+0x0/0x44 returned 0 after 0 usecs
calling i2c_gpio_init+0x0/0x30 @ 1
initcall i2c_gpio_init+0x0/0x30 returned 0 after 0 usecs
calling videodev_init+0x0/0x7f @ 1
Linux video capture interface: v2.00
initcall videodev_init+0x0/0x7f returned 0 after 976 usecs
calling init_dvbdev+0x0/0xc2 @ 1
initcall init_dvbdev+0x0/0xc2 returned 0 after 0 usecs
calling pps_init+0x0/0xa6 @ 1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
initcall pps_init+0x0/0xa6 returned 0 after 1953 usecs
calling ptp_init+0x0/0x8c @ 1
PTP clock support registered
initcall ptp_init+0x0/0x8c returned 0 after 976 usecs
calling power_supply_class_init+0x0/0x35 @ 1
initcall power_supply_class_init+0x0/0x35 returned 0 after 0 usecs
calling hwmon_init+0x0/0xea @ 1
initcall hwmon_init+0x0/0xea returned 0 after 976 usecs
calling mmc_init+0x0/0x80 @ 1
initcall mmc_init+0x0/0x80 returned 0 after 0 usecs
calling leds_init+0x0/0x32 @ 1
initcall leds_init+0x0/0x32 returned 0 after 0 usecs
calling iio_init+0x0/0x85 @ 1
initcall iio_init+0x0/0x85 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x44 @ 1
PCI: Probing PCI hardware
PCI: root bus 00: using default resources
PCI: Probing PCI hardware (bus 00)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
pci 0000:00:01.0: [10de:0050] type 00 class 0x060100
pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io 0xe400-0xe41f]
pci 0000:00:01.1: reg 0x20: [io 0x4c00-0x4c3f]
pci 0000:00:01.1: reg 0x24: [io 0x4c40-0x4c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xda004000-0xda004fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xfeb00000-0xfeb000ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: [10de:0059] type 00 class 0x040100
pci 0000:00:04.0: reg 0x10: [io 0xdc00-0xdcff]
pci 0000:00:04.0: reg 0x14: [io 0xe000-0xe0ff]
pci 0000:00:04.0: reg 0x18: [mem 0xda003000-0xda003fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
pci 0000:00:07.0: reg 0x10: [io 0x09f0-0x09f7]
pci 0000:00:07.0: reg 0x14: [io 0x0bf0-0x0bf3]
pci 0000:00:07.0: reg 0x18: [io 0x0970-0x0977]
pci 0000:00:07.0: reg 0x1c: [io 0x0b70-0x0b73]
pci 0000:00:07.0: reg 0x20: [io 0xd800-0xd80f]
pci 0000:00:07.0: reg 0x24: [mem 0xda002000-0xda002fff]
pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
pci 0000:00:08.0: reg 0x10: [io 0x09e0-0x09e7]
pci 0000:00:08.0: reg 0x14: [io 0x0be0-0x0be3]
pci 0000:00:08.0: reg 0x18: [io 0x0960-0x0967]
pci 0000:00:08.0: reg 0x1c: [io 0x0b60-0x0b63]
pci 0000:00:08.0: reg 0x20: [io 0xc400-0xc40f]
pci 0000:00:08.0: reg 0x24: [mem 0xda001000-0xda001fff]
pci 0000:00:09.0: [10de:005c] type 01 class 0x060401
pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000
pci 0000:00:0a.0: reg 0x10: [mem 0xda000000-0xda000fff]
pci 0000:00:0a.0: reg 0x14: [io 0xb000-0xb007]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:00:09.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci 0000:00:0b.0: PCI bridge to [bus 04]
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0d.0: PCI bridge to [bus 02]
pci 0000:01:00.0: [1002:5b60] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:01:00.0: reg 0x14: [io 0xa000-0xa0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xd9000000-0xd900ffff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:5b70] type 00 class 0x038000
pci 0000:01:00.1: reg 0x10: [mem 0xd9010000-0xd901ffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:0e.0: PCI bridge to [bus 01]
pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 05
pci 0000:00:00.0: default IRQ router [10de:005e]
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
initcall pci_subsys_init+0x0/0x44 returned 0 after 85937 usecs
calling proto_init+0x0/0xf @ 1
initcall proto_init+0x0/0xf returned 0 after 0 usecs
calling net_dev_init+0x0/0x197 @ 1
initcall net_dev_init+0x0/0x197 returned 0 after 0 usecs
calling neigh_init+0x0/0xa4 @ 1
initcall neigh_init+0x0/0xa4 returned 0 after 0 usecs
calling fib_rules_init+0x0/0xbd @ 1
initcall fib_rules_init+0x0/0xbd returned 0 after 0 usecs
calling genl_init+0x0/0x76 @ 1
initcall genl_init+0x0/0x76 returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x76 @ 1
initcall cipso_v4_init+0x0/0x76 returned 0 after 0 usecs
calling irda_init+0x0/0x88 @ 1
NET: Registered protocol family 23
initcall irda_init+0x0/0x88 returned 0 after 976 usecs
calling bt_init+0x0/0x89 @ 1
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
initcall bt_init+0x0/0x89 returned 0 after 5859 usecs
calling atm_init+0x0/0xd0 @ 1
NET: Registered protocol family 8
NET: Registered protocol family 20
initcall atm_init+0x0/0xd0 returned 0 after 1953 usecs
calling cfg80211_init+0x0/0xd7 @ 1
cfg80211: Calling CRDA to update world regulatory domain
initcall cfg80211_init+0x0/0xd7 returned 0 after 1953 usecs
calling wireless_nlevent_init+0x0/0xf @ 1
initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs
calling ieee80211_init+0x0/0xa @ 1
initcall ieee80211_init+0x0/0xa returned 0 after 0 usecs
calling netlbl_init+0x0/0x7d @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x7d returned 0 after 3906 usecs
calling wpan_phy_class_init+0x0/0x33 @ 1
initcall wpan_phy_class_init+0x0/0x33 returned 0 after 0 usecs
calling nfc_init+0x0/0x8f @ 1
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
initcall nfc_init+0x0/0x8f returned 0 after 1953 usecs
calling nfc_hci_init+0x0/0xa @ 1
initcall nfc_hci_init+0x0/0xa returned 0 after 0 usecs
calling nmi_warning_debugfs+0x0/0x24 @ 1
initcall nmi_warning_debugfs+0x0/0x24 returned 0 after 0 usecs
calling clocksource_done_booting+0x0/0x3b @ 1
Switched to clocksource pit
initcall clocksource_done_booting+0x0/0x3b returned 0 after 1025 usecs
calling tracer_init_debugfs+0x0/0x158 @ 1
initcall tracer_init_debugfs+0x0/0x158 returned 0 after 608 usecs
calling init_trace_printk_function_export+0x0/0x33 @ 1
initcall init_trace_printk_function_export+0x0/0x33 returned 0 after 14 usecs
calling event_trace_init+0x0/0x1bb @ 1
initcall event_trace_init+0x0/0x1bb returned 0 after 98030 usecs
calling init_uprobe_trace+0x0/0x59 @ 1
initcall init_uprobe_trace+0x0/0x59 returned 0 after 28 usecs
calling init_pipe_fs+0x0/0x3d @ 1
initcall init_pipe_fs+0x0/0x3d returned 0 after 103 usecs
calling eventpoll_init+0x0/0x10d @ 1
initcall eventpoll_init+0x0/0x10d returned 0 after 42 usecs
calling anon_inode_init+0x0/0x52 @ 1
initcall anon_inode_init+0x0/0x52 returned 0 after 62 usecs
calling fscache_init+0x0/0x193 @ 1
FS-Cache: Loaded
initcall fscache_init+0x0/0x193 returned 0 after 1112 usecs
calling cachefiles_init+0x0/0x99 @ 1
CacheFiles: Loaded
initcall cachefiles_init+0x0/0x99 returned 0 after 1510 usecs
calling tomoyo_initerface_init+0x0/0x17c @ 1
initcall tomoyo_initerface_init+0x0/0x17c returned 0 after 200 usecs
calling aa_create_aafs+0x0/0xa7 @ 1
initcall aa_create_aafs+0x0/0xa7 returned 0 after 4 usecs
calling blk_scsi_ioctl_init+0x0/0x288 @ 1
initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 4 usecs
calling dynamic_debug_init_debugfs+0x0/0x6a @ 1
initcall dynamic_debug_init_debugfs+0x0/0x6a returned 0 after 26 usecs
calling pnp_system_init+0x0/0xf @ 1
initcall pnp_system_init+0x0/0xf returned 0 after 39 usecs
calling pnpbios_init+0x0/0x337 @ 1
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xb00fc550
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc580, dseg 0xf0000
pnp 00:00: [irq 2]
pnp 00:00: [io 0x0020-0x0021]
pnp 00:00: [io 0x00a0-0x00a1]
pnp 00:00: Plug and Play BIOS device, IDs PNP0000 (active)
pnp 00:01: [dma 4]
pnp 00:01: [io 0x0000-0x000f]
pnp 00:01: [io 0x0081-0x0083]
pnp 00:01: [io 0x0087]
pnp 00:01: [io 0x0089-0x008b]
pnp 00:01: [io 0x008f-0x0091]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: Plug and Play BIOS device, IDs PNP0200 (active)
pnp 00:02: [irq 0]
pnp 00:02: [io 0x0040-0x0043]
pnp 00:02: Plug and Play BIOS device, IDs PNP0100 (active)
pnp 00:03: [irq 8]
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: Plug and Play BIOS device, IDs PNP0b00 (active)
pnp 00:04: [irq 1]
pnp 00:04: [io 0x0060]
pnp 00:04: [io 0x0064]
pnp 00:04: Plug and Play BIOS device, IDs PNP0303 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play BIOS device, IDs PNP0800 (active)
pnp 00:06: [irq 13]
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: Plug and Play BIOS device, IDs PNP0c04 (active)
pnp 00:07: [mem 0x00000000-0x0009ffff]
pnp 00:07: [mem 0xfffe0000-0xffffffff]
pnp 00:07: [mem 0xfec00000-0xfec0ffff]
pnp 00:07: [mem 0xfee00000-0xfeefffff]
pnp 00:07: [mem 0xfefffc00-0xfeffffff]
pnp 00:07: [mem 0x00100000-0x00ffffff]
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0xfffe0000-0xffffffff] has been reserved
system 00:07: [mem 0xfec00000-0xfec0ffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:07: [mem 0xfefffc00-0xfeffffff] has been reserved
system 00:07: [mem 0x00100000-0x00ffffff] could not be reserved
system 00:07: Plug and Play BIOS device, IDs PNP0c01 (active)
pnp 00:08: [mem 0x000f0000-0x000f3fff]
pnp 00:08: [mem 0x000f4000-0x000f7fff]
pnp 00:08: [mem 0x000f8000-0x000fbfff]
pnp 00:08: [mem 0x000fc000-0x000fffff]
system 00:08: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:08: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:08: Plug and Play BIOS device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0290-0x029f]
pnp 00:09: [io 0x04d0-0x04d1]
pnp 00:09: [io 0x0cf8-0x0cff]
pnp 00:09: Plug and Play BIOS device, IDs PNP0a03 (active)
pnp 00:0b: [irq 4]
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: Plug and Play BIOS device, IDs PNP0501 (active)
pnp 00:0c: [dma 2]
pnp 00:0c: [io 0x03f0-0x03f5]
pnp 00:0c: [io 0x03f7]
pnp 00:0c: [irq 6]
pnp 00:0c: Plug and Play BIOS device, IDs PNP0700 (active)
pnp 00:0e: [dma 3]
pnp 00:0e: [irq 7]
pnp 00:0e: [io 0x0378-0x037f]
pnp 00:0e: [io 0x0778-0x077f]
pnp 00:0e: Plug and Play BIOS device, IDs PNP0401 (active)
pnp 00:0f: [irq 10]
pnp 00:0f: [io 0x0330-0x0333]
pnp 00:0f: Plug and Play BIOS device, IDs PNPb006 (active)
pnp 00:10: [io 0x0201]
pnp 00:10: Plug and Play BIOS device, IDs PNPb02f (active)
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
initcall pnpbios_init+0x0/0x337 returned 0 after 76635 usecs
calling chr_dev_init+0x0/0xc3 @ 1
initcall chr_dev_init+0x0/0xc3 returned 0 after 5687 usecs
calling firmware_class_init+0x0/0x109 @ 1
initcall firmware_class_init+0x0/0x109 returned 0 after 29 usecs
calling init_pcmcia_bus+0x0/0x5e @ 1
initcall init_pcmcia_bus+0x0/0x5e returned 0 after 55 usecs
calling thermal_init+0x0/0xb5 @ 1
initcall thermal_init+0x0/0xb5 returned 0 after 85 usecs
calling ssb_modinit+0x0/0x3f @ 1
initcall ssb_modinit+0x0/0x3f returned 0 after 39 usecs
calling pcibios_assign_resources+0x0/0x8f @ 1
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:0b.0: PCI bridge to [bus 04]
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0d.0: PCI bridge to [bus 02]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
pci 0000:00:0e.0: PCI bridge to [bus 01]
pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
initcall pcibios_assign_resources+0x0/0x8f returned 0 after 16287 usecs
calling sysctl_core_init+0x0/0x23 @ 1
initcall sysctl_core_init+0x0/0x23 returned 0 after 36 usecs
calling inet_init+0x0/0x26f @ 1
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 3, 40960 bytes)
UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
initcall inet_init+0x0/0x26f returned 0 after 8885 usecs
calling ipv4_offload_init+0x0/0x4e @ 1
initcall ipv4_offload_init+0x0/0x4e returned 0 after 11 usecs
calling af_unix_init+0x0/0x4d @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x4d returned 0 after 1086 usecs
calling ipv6_offload_init+0x0/0x6b @ 1
initcall ipv6_offload_init+0x0/0x6b returned 0 after 4 usecs
calling init_sunrpc+0x0/0x64 @ 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
initcall init_sunrpc+0x0/0x64 returned 0 after 4243 usecs
calling pci_apply_final_quirks+0x0/0x10f @ 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
initcall pci_apply_final_quirks+0x0/0x10f returned 0 after 74263 usecs
calling populate_rootfs+0x0/0x93 @ 1
initcall populate_rootfs+0x0/0x93 returned 0 after 307 usecs
calling pci_iommu_init+0x0/0x34 @ 1
initcall pci_iommu_init+0x0/0x34 returned 0 after 4 usecs
calling i8259A_init_ops+0x0/0x20 @ 1
initcall i8259A_init_ops+0x0/0x20 returned 0 after 4 usecs
calling sbf_init+0x0/0xc9 @ 1
initcall sbf_init+0x0/0xc9 returned 0 after 4 usecs
calling init_tsc_clocksource+0x0/0xac @ 1
initcall init_tsc_clocksource+0x0/0xac returned 0 after 24 usecs
calling add_rtc_cmos+0x0/0x84 @ 1
initcall add_rtc_cmos+0x0/0x84 returned 0 after 5 usecs
calling i8237A_init_ops+0x0/0x11 @ 1
initcall i8237A_init_ops+0x0/0x11 returned 0 after 4 usecs
calling cache_sysfs_init+0x0/0x1c4 @ 1
initcall cache_sysfs_init+0x0/0x1c4 returned 0 after 4 usecs
calling thermal_throttle_init_device+0x0/0xb8 @ 1
initcall thermal_throttle_init_device+0x0/0xb8 returned 0 after 4 usecs
calling amd_ibs_init+0x0/0x1ce @ 1
initcall amd_ibs_init+0x0/0x1ce returned -19 after 4 usecs
calling cpuid_init+0x0/0xe7 @ 1
initcall cpuid_init+0x0/0xe7 returned 0 after 188 usecs
calling ioapic_init_ops+0x0/0x11 @ 1
initcall ioapic_init_ops+0x0/0x11 returned 0 after 4 usecs
calling add_pcspkr+0x0/0x3c @ 1
initcall add_pcspkr+0x0/0x3c returned 0 after 67 usecs
calling start_periodic_check_for_corruption+0x0/0x54 @ 1
Scanning for low memory corruption every 60 seconds
initcall start_periodic_check_for_corruption+0x0/0x54 returned 0 after 1177 usecs
calling add_bus_probe+0x0/0x21 @ 1
initcall add_bus_probe+0x0/0x21 returned 0 after 4 usecs
calling sysfb_init+0x0/0x80 @ 1
initcall sysfb_init+0x0/0x80 returned 0 after 57 usecs
calling start_pageattr_test+0x0/0x4b @ 1
initcall start_pageattr_test+0x0/0x4b returned 0 after 104 usecs
calling pt_dump_init+0x0/0x6d @ 1
initcall pt_dump_init+0x0/0x6d returned 0 after 19 usecs
calling aes_init+0x0/0xf @ 1
initcall aes_init+0x0/0xf returned 0 after 196 usecs
calling init+0x0/0xf @ 1
initcall init+0x0/0xf returned 0 after 178 usecs
calling init+0x0/0xf @ 1
initcall init+0x0/0xf returned 0 after 55 usecs
calling aesni_init+0x0/0x32 @ 1
initcall aesni_init+0x0/0x32 returned -19 after 4 usecs
calling crc32c_intel_mod_init+0x0/0x24 @ 1
initcall crc32c_intel_mod_init+0x0/0x24 returned -19 after 4 usecs
calling crc32_pclmul_mod_init+0x0/0x31 @ 1
PCLMULQDQ-NI instructions are not detected.
initcall crc32_pclmul_mod_init+0x0/0x31 returned -19 after 798 usecs
calling net5501_init+0x0/0x104 @ 1
initcall net5501_init+0x0/0x104 returned 0 after 4 usecs
calling goldfish_init+0x0/0x3f @ 1
initcall goldfish_init+0x0/0x3f returned 0 after 65 usecs
calling iris_init+0x0/0xb1 @ 1
The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
initcall iris_init+0x0/0xb1 returned -19 after 1113 usecs
calling olpc_create_platform_devices+0x0/0x1c @ 1
initcall olpc_create_platform_devices+0x0/0x1c returned 0 after 4 usecs
calling scx200_init+0x0/0x23 @ 1
NatSemi SCx200 Driver
initcall scx200_init+0x0/0x23 returned 0 after 1028 usecs
calling proc_execdomains_init+0x0/0x27 @ 1
initcall proc_execdomains_init+0x0/0x27 returned 0 after 14 usecs
calling ioresources_init+0x0/0x44 @ 1
initcall ioresources_init+0x0/0x44 returned 0 after 19 usecs
calling uid_cache_init+0x0/0x81 @ 1
initcall uid_cache_init+0x0/0x81 returned 0 after 27 usecs
calling init_posix_timers+0x0/0x1dd @ 1
initcall init_posix_timers+0x0/0x1dd returned 0 after 16 usecs
calling init_posix_cpu_timers+0x0/0x9b @ 1
initcall init_posix_cpu_timers+0x0/0x9b returned 0 after 4 usecs
calling init_sched_debug_procfs+0x0/0x30 @ 1
initcall init_sched_debug_procfs+0x0/0x30 returned 0 after 12 usecs
calling irq_gc_init_ops+0x0/0x11 @ 1
initcall irq_gc_init_ops+0x0/0x11 returned 0 after 4 usecs
calling irq_debugfs_init+0x0/0x30 @ 1
initcall irq_debugfs_init+0x0/0x30 returned 0 after 16 usecs
calling irq_pm_init_ops+0x0/0x11 @ 1
initcall irq_pm_init_ops+0x0/0x11 returned 0 after 17 usecs
calling timekeeping_init_ops+0x0/0x11 @ 1
initcall timekeeping_init_ops+0x0/0x11 returned 0 after 4 usecs
calling init_clocksource_sysfs+0x0/0x58 @ 1
initcall init_clocksource_sysfs+0x0/0x58 returned 0 after 108 usecs
calling init_timer_list_procfs+0x0/0x30 @ 1
initcall init_timer_list_procfs+0x0/0x30 returned 0 after 12 usecs
calling alarmtimer_init+0x0/0x168 @ 1
initcall alarmtimer_init+0x0/0x168 returned 0 after 109 usecs
calling clockevents_init_sysfs+0x0/0x7a @ 1
initcall clockevents_init_sysfs+0x0/0x7a returned 0 after 150 usecs
calling lockdep_proc_init+0x0/0x4a @ 1
initcall lockdep_proc_init+0x0/0x4a returned 0 after 19 usecs
calling futex_init+0x0/0x61 @ 1
initcall futex_init+0x0/0x61 returned 0 after 17 usecs
calling init_rttest+0x0/0x139 @ 1
Initializing RT-Tester: OK
initcall init_rttest+0x0/0x139 returned 0 after 1478 usecs
calling proc_dma_init+0x0/0x27 @ 1
initcall proc_dma_init+0x0/0x27 returned 0 after 12 usecs
calling kallsyms_init+0x0/0x2a @ 1
initcall kallsyms_init+0x0/0x2a returned 0 after 18 usecs
calling backtrace_regression_test+0x0/0xdb @ 1
====[ backtrace testing ]===========
Testing a backtrace from process context.
The following trace is a kernel self test and not a bug!
CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484
b1069b79 b1069b79 b010debc b010debc b235a604 b235a604 b010def8 b010def8 b1069ba8 b1069ba8 b2871e98 b2871e98 00000282 00000282 00d17a94 00d17a94
00000976 00000976 b2c82480 b2c82480 000006aa 000006aa b010def8 b010def8 b105c5f4 b105c5f4 00000001 00000001 00000000 00000000 00000000 00000000
b1069b79 b1069b79 000006aa 000006aa b010df78 b010df78 b2d05af4 b2d05af4 b2cc09a0 b2cc09a0 b2864daa b2864daa b1069b79 b1069b79 00000001 00000001
Call Trace:
[<b1069b79>] ? backtrace_test_irq_callback+0x14/0x14
[<b235a604>] dump_stack+0x16/0x18
[<b1069ba8>] backtrace_regression_test+0x2f/0xdb
[<b105c5f4>] ? ktime_get+0x58/0xc6
[<b1069b79>] ? backtrace_test_irq_callback+0x14/0x14
[<b2d05af4>] do_one_initcall+0x72/0x14e
[<b1069b79>] ? backtrace_test_irq_callback+0x14/0x14
[<b103eedc>] ? parse_args+0x243/0x384
[<b1038bed>] ? __usermodehelper_set_disable_depth+0x3c/0x42
[<b2d05ca6>] kernel_init_freeable+0xd6/0x178
[<b2d05475>] ? loglevel+0x2b/0x2b
[<b2350e9e>] kernel_init+0xb/0xc3
[<b23735d7>] ret_from_kernel_thread+0x1b/0x28
[<b2350e93>] ? rest_init+0xb7/0xb7
Testing a backtrace from irq context.
The following trace is a kernel self test and not a bug!
CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484
00000006 00000006 b012feb8 b012feb8 b235a604 b235a604 b012fec0 b012fec0 b1069b6d b1069b6d b012fecc b012fecc b102be74 b102be74 00000040 00000040
b012ff0c b012ff0c b102ba58 b102ba58 b012fedc b012fedc 00000046 00000046 b1049660 b1049660 b012ff58 b012ff58 00000286 00000286 b012ff48 b012ff48
04208040 04208040 fffb712d fffb712d 0000000a 0000000a 00000100 00000100 00000001 00000001 b0055a20 b0055a20 b2b5db40 b2b5db40 b01137a0 b01137a0
Call Trace:
[<b235a604>] dump_stack+0x16/0x18
[<b1069b6d>] backtrace_test_irq_callback+0x8/0x14
[<b102be74>] tasklet_action+0x65/0x6a
[<b102ba58>] __do_softirq+0xa9/0x1e8
[<b1049660>] ? complete+0x42/0x4a
[<b102bbae>] run_ksoftirqd+0x17/0x3a
[<b1046629>] smpboot_thread_fn+0x101/0x117
[<b1046528>] ? lg_global_unlock+0x29/0x29
[<b1040519>] kthread+0x8e/0x9a
[<b23735d7>] ret_from_kernel_thread+0x1b/0x28
[<b104048b>] ? __kthread_unpark+0x29/0x29
Testing a saved backtrace.
The following trace is a kernel self test and not a bug!
[<b100a677>] save_stack_trace+0x2a/0x44
[<b100a677>] save_stack_trace+0x2a/0x44
[<b1069c37>] backtrace_regression_test+0xbe/0xdb
[<b1069c37>] backtrace_regression_test+0xbe/0xdb
[<b2d05af4>] do_one_initcall+0x72/0x14e
[<b2d05af4>] do_one_initcall+0x72/0x14e
[<b2d05ca6>] kernel_init_freeable+0xd6/0x178
[<b2d05ca6>] kernel_init_freeable+0xd6/0x178
[<b2350e9e>] kernel_init+0xb/0xc3
[<b2350e9e>] kernel_init+0xb/0xc3
[<b23735d7>] ret_from_kernel_thread+0x1b/0x28
[<b23735d7>] ret_from_kernel_thread+0x1b/0x28
[<ffffffff>] 0xffffffff
[<ffffffff>] 0xffffffff
====[ end of backtrace testing ]====
initcall backtrace_regression_test+0x0/0xdb returned 0 after 95106 usecs
calling audit_init+0x0/0x14c @ 1
audit: initializing netlink socket (disabled)
type=2000 audit(1381004849.342:1): initialized
initcall audit_init+0x0/0x14c returned 0 after 2452 usecs
calling audit_watch_init+0x0/0x31 @ 1
initcall audit_watch_init+0x0/0x31 returned 0 after 13 usecs
calling audit_tree_init+0x0/0x42 @ 1
initcall audit_tree_init+0x0/0x42 returned 0 after 10 usecs
calling hung_task_init+0x0/0x56 @ 1
initcall hung_task_init+0x0/0x56 returned 0 after 44 usecs
calling utsname_sysctl_init+0x0/0x11 @ 1
initcall utsname_sysctl_init+0x0/0x11 returned 0 after 19 usecs
calling init_mmio_trace+0x0/0xf @ 1
initcall init_mmio_trace+0x0/0xf returned 0 after 5 usecs
calling init_blk_tracer+0x0/0x54 @ 1
initcall init_blk_tracer+0x0/0x54 returned 0 after 6 usecs
calling perf_event_sysfs_init+0x0/0x91 @ 1
initcall perf_event_sysfs_init+0x0/0x91 returned 0 after 184 usecs
calling init_uprobes+0x0/0x4f @ 1
initcall init_uprobes+0x0/0x4f returned 0 after 18 usecs
calling init_per_zone_wmark_min+0x0/0x9a @ 1
initcall init_per_zone_wmark_min+0x0/0x9a returned 0 after 68 usecs
calling kswapd_init+0x0/0x13 @ 1
initcall kswapd_init+0x0/0x13 returned 0 after 46 usecs
calling extfrag_debug_init+0x0/0x7d @ 1
initcall extfrag_debug_init+0x0/0x7d returned 0 after 40 usecs
calling setup_vmstat+0x0/0x8a @ 1
initcall setup_vmstat+0x0/0x8a returned 0 after 35 usecs
calling mm_sysfs_init+0x0/0x22 @ 1
initcall mm_sysfs_init+0x0/0x22 returned 0 after 8 usecs
calling slab_proc_init+0x0/0x2a @ 1
initcall slab_proc_init+0x0/0x2a returned 0 after 11 usecs
calling init_reserve_notifier+0x0/0x7 @ 1
initcall init_reserve_notifier+0x0/0x7 returned 0 after 4 usecs
calling init_admin_reserve+0x0/0x25 @ 1
initcall init_admin_reserve+0x0/0x25 returned 0 after 4 usecs
calling init_user_reserve+0x0/0x25 @ 1
initcall init_user_reserve+0x0/0x25 returned 0 after 4 usecs
calling proc_vmalloc_init+0x0/0x2a @ 1
initcall proc_vmalloc_init+0x0/0x2a returned 0 after 12 usecs
calling ksm_init+0x0/0x15b @ 1
initcall ksm_init+0x0/0x15b returned 0 after 114 usecs
calling slab_proc_init+0x0/0x7 @ 1
initcall slab_proc_init+0x0/0x7 returned 0 after 3 usecs
calling cpucache_init+0x0/0xcc @ 1
initcall cpucache_init+0x0/0xcc returned 0 after 4 usecs
calling hugepage_init+0x0/0x125 @ 1
initcall hugepage_init+0x0/0x125 returned 0 after 146 usecs
calling pfn_inject_init+0x0/0x131 @ 1
initcall pfn_inject_init+0x0/0x131 returned 0 after 95 usecs
calling fcntl_init+0x0/0x2f @ 1
initcall fcntl_init+0x0/0x2f returned 0 after 15 usecs
calling proc_filesystems_init+0x0/0x27 @ 1
initcall proc_filesystems_init+0x0/0x27 returned 0 after 12 usecs
calling dio_init+0x0/0x32 @ 1
initcall dio_init+0x0/0x32 returned 0 after 14 usecs
calling fsnotify_mark_init+0x0/0x46 @ 1
initcall fsnotify_mark_init+0x0/0x46 returned 0 after 253 usecs
calling inotify_user_setup+0x0/0x78 @ 1
initcall inotify_user_setup+0x0/0x78 returned 0 after 25 usecs
calling fanotify_user_setup+0x0/0x5a @ 1
initcall fanotify_user_setup+0x0/0x5a returned 0 after 24 usecs
calling aio_setup+0x0/0x8a @ 1
initcall aio_setup+0x0/0x8a returned 0 after 30 usecs
calling proc_locks_init+0x0/0x27 @ 1
initcall proc_locks_init+0x0/0x27 returned 0 after 12 usecs
calling init_mbcache+0x0/0x11 @ 1
initcall init_mbcache+0x0/0x11 returned 0 after 4 usecs
calling dquot_init+0x0/0xfb @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
initcall dquot_init+0x0/0xfb returned 0 after 1600 usecs
calling init_v1_quota_format+0x0/0xf @ 1
initcall init_v1_quota_format+0x0/0xf returned 0 after 12 usecs
calling init_v2_quota_format+0x0/0x1d @ 1
initcall init_v2_quota_format+0x0/0x1d returned 0 after 4 usecs
calling proc_cmdline_init+0x0/0x27 @ 1
initcall proc_cmdline_init+0x0/0x27 returned 0 after 12 usecs
calling proc_consoles_init+0x0/0x27 @ 1
initcall proc_consoles_init+0x0/0x27 returned 0 after 11 usecs
calling proc_cpuinfo_init+0x0/0x27 @ 1
initcall proc_cpuinfo_init+0x0/0x27 returned 0 after 12 usecs
calling proc_devices_init+0x0/0x27 @ 1
initcall proc_devices_init+0x0/0x27 returned 0 after 13 usecs
calling proc_interrupts_init+0x0/0x27 @ 1
initcall proc_interrupts_init+0x0/0x27 returned 0 after 11 usecs
calling proc_loadavg_init+0x0/0x27 @ 1
initcall proc_loadavg_init+0x0/0x27 returned 0 after 12 usecs
calling proc_meminfo_init+0x0/0x27 @ 1
initcall proc_meminfo_init+0x0/0x27 returned 0 after 11 usecs
calling proc_stat_init+0x0/0x27 @ 1
initcall proc_stat_init+0x0/0x27 returned 0 after 12 usecs
calling proc_uptime_init+0x0/0x27 @ 1
initcall proc_uptime_init+0x0/0x27 returned 0 after 11 usecs
calling proc_version_init+0x0/0x27 @ 1
initcall proc_version_init+0x0/0x27 returned 0 after 11 usecs
calling proc_softirqs_init+0x0/0x27 @ 1
initcall proc_softirqs_init+0x0/0x27 returned 0 after 11 usecs
calling proc_kcore_init+0x0/0x7e @ 1
initcall proc_kcore_init+0x0/0x7e returned 0 after 20 usecs
calling proc_kmsg_init+0x0/0x2a @ 1
initcall proc_kmsg_init+0x0/0x2a returned 0 after 12 usecs
calling proc_page_init+0x0/0x4a @ 1
initcall proc_page_init+0x0/0x4a returned 0 after 19 usecs
calling configfs_init+0x0/0xa8 @ 1
initcall configfs_init+0x0/0xa8 returned 0 after 23 usecs
calling init_devpts_fs+0x0/0x52 @ 1
initcall init_devpts_fs+0x0/0x52 returned 0 after 82 usecs
calling init_reiserfs_fs+0x0/0x70 @ 1
initcall init_reiserfs_fs+0x0/0x70 returned 0 after 27 usecs
calling init_ext3_fs+0x0/0x76 @ 1
initcall init_ext3_fs+0x0/0x76 returned 0 after 48 usecs
calling init_ext2_fs+0x0/0x76 @ 1
initcall init_ext2_fs+0x0/0x76 returned 0 after 38 usecs
calling ext4_init_fs+0x0/0x1e6 @ 1
initcall ext4_init_fs+0x0/0x1e6 returned 0 after 161 usecs
calling journal_init+0x0/0xeb @ 1
initcall journal_init+0x0/0xeb returned 0 after 67 usecs
calling journal_init+0x0/0x120 @ 1
initcall journal_init+0x0/0x120 returned 0 after 87 usecs
calling init_ramfs_fs+0x0/0x45 @ 1
initcall init_ramfs_fs+0x0/0x45 returned 0 after 4 usecs
calling init_fat_fs+0x0/0x4c @ 1
initcall init_fat_fs+0x0/0x4c returned 0 after 26 usecs
calling init_vfat_fs+0x0/0xf @ 1
initcall init_vfat_fs+0x0/0xf returned 0 after 4 usecs
calling init_msdos_fs+0x0/0xf @ 1
initcall init_msdos_fs+0x0/0xf returned 0 after 4 usecs
calling init_iso9660_fs+0x0/0x66 @ 1
initcall init_iso9660_fs+0x0/0x66 returned 0 after 16 usecs
calling init_nfs_fs+0x0/0x159 @ 1
initcall init_nfs_fs+0x0/0x159 returned 0 after 432 usecs
calling init_nfs_v2+0x0/0x11 @ 1
initcall init_nfs_v2+0x0/0x11 returned 0 after 13 usecs
calling init_nfs_v4+0x0/0x40 @ 1
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
initcall init_nfs_v4+0x0/0x40 returned 0 after 3527 usecs
calling init_nfsd+0x0/0x113 @ 1
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
initcall init_nfsd+0x0/0x113 returned 0 after 1421 usecs
calling init_nlm+0x0/0x3d @ 1
initcall init_nlm+0x0/0x3d returned 0 after 30 usecs
calling init_nls_cp437+0x0/0xf @ 1
initcall init_nls_cp437+0x0/0xf returned 0 after 13 usecs
calling init_nls_cp737+0x0/0xf @ 1
initcall init_nls_cp737+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp775+0x0/0xf @ 1
initcall init_nls_cp775+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp850+0x0/0xf @ 1
initcall init_nls_cp850+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp852+0x0/0xf @ 1
initcall init_nls_cp852+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp855+0x0/0xf @ 1
initcall init_nls_cp855+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp857+0x0/0xf @ 1
initcall init_nls_cp857+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp863+0x0/0xf @ 1
initcall init_nls_cp863+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp865+0x0/0xf @ 1
initcall init_nls_cp865+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp866+0x0/0xf @ 1
initcall init_nls_cp866+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp869+0x0/0xf @ 1
initcall init_nls_cp869+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp936+0x0/0xf @ 1
initcall init_nls_cp936+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp949+0x0/0xf @ 1
initcall init_nls_cp949+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp950+0x0/0xf @ 1
initcall init_nls_cp950+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp1250+0x0/0xf @ 1
initcall init_nls_cp1250+0x0/0xf returned 0 after 17 usecs
calling init_nls_ascii+0x0/0xf @ 1
initcall init_nls_ascii+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_1+0x0/0xf @ 1
initcall init_nls_iso8859_1+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_2+0x0/0xf @ 1
initcall init_nls_iso8859_2+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_4+0x0/0xf @ 1
initcall init_nls_iso8859_4+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_6+0x0/0xf @ 1
initcall init_nls_iso8859_6+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_7+0x0/0xf @ 1
initcall init_nls_iso8859_7+0x0/0xf returned 0 after 4 usecs
calling init_nls_cp1255+0x0/0xf @ 1
initcall init_nls_cp1255+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_9+0x0/0xf @ 1
initcall init_nls_iso8859_9+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_13+0x0/0xf @ 1
initcall init_nls_iso8859_13+0x0/0xf returned 0 after 4 usecs
calling init_nls_iso8859_15+0x0/0xf @ 1
initcall init_nls_iso8859_15+0x0/0xf returned 0 after 4 usecs
calling init_nls_utf8+0x0/0x1f @ 1
initcall init_nls_utf8+0x0/0x1f returned 0 after 4 usecs
calling init_nls_macceltic+0x0/0xf @ 1
initcall init_nls_macceltic+0x0/0xf returned 0 after 4 usecs
calling init_nls_maccroatian+0x0/0xf @ 1
initcall init_nls_maccroatian+0x0/0xf returned 0 after 4 usecs
calling init_nls_maccyrillic+0x0/0xf @ 1
initcall init_nls_maccyrillic+0x0/0xf returned 0 after 4 usecs
calling init_nls_macgreek+0x0/0xf @ 1
initcall init_nls_macgreek+0x0/0xf returned 0 after 4 usecs
calling init_nls_maciceland+0x0/0xf @ 1
initcall init_nls_maciceland+0x0/0xf returned 0 after 17 usecs
calling init_nls_macinuit+0x0/0xf @ 1
initcall init_nls_macinuit+0x0/0xf returned 0 after 4 usecs
calling init_nls_macromanian+0x0/0xf @ 1
initcall init_nls_macromanian+0x0/0xf returned 0 after 4 usecs
calling init_cifs+0x0/0x45a @ 1
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
initcall init_cifs+0x0/0x45a returned 0 after 2218 usecs
calling init_ncp_fs+0x0/0x66 @ 1
initcall init_ncp_fs+0x0/0x66 returned 0 after 23 usecs
calling init_ntfs_fs+0x0/0x23c @ 1
NTFS driver 2.1.30 [Flags: R/W DEBUG].
initcall init_ntfs_fs+0x0/0x23c returned 0 after 998 usecs
calling init_autofs4_fs+0x0/0x24 @ 1
initcall init_autofs4_fs+0x0/0x24 returned 0 after 102 usecs
calling fuse_init+0x0/0x19d @ 1
fuse init (API version 7.22)
initcall fuse_init+0x0/0x19d returned 0 after 1317 usecs
calling cuse_init+0x0/0x93 @ 1
initcall cuse_init+0x0/0x93 returned 0 after 90 usecs
calling init_udf_fs+0x0/0x66 @ 1
initcall init_udf_fs+0x0/0x66 returned 0 after 18 usecs
calling init_xfs_fs+0x0/0xcf @ 1
SGI XFS with security attributes, realtime, debug enabled
initcall init_xfs_fs+0x0/0xcf returned 0 after 1705 usecs
calling init_v9fs+0x0/0xf3 @ 1
9p: Installing v9fs 9p2000 file system support
FS-Cache: Netfs '9p' registered for caching
initcall init_v9fs+0x0/0xf3 returned 0 after 1137 usecs
calling init_btrfs_fs+0x0/0x11f @ 1
bio: create slab <bio-1> at 1
Btrfs loaded, assert=on
btrfs: selftest: Running btrfs free space cache tests
btrfs: selftest: Running extent only tests
btrfs: selftest: Running bitmap only tests
btrfs: selftest: Running bitmap and extent tests
btrfs: selftest: Free space cache tests finished
initcall init_btrfs_fs+0x0/0x11f returned 0 after 6991 usecs
calling init_ceph+0x0/0x146 @ 1
FS-Cache: Netfs 'ceph' registered for caching
ceph: loaded (mds proto 32)
initcall init_ceph+0x0/0x146 returned 0 after 2158 usecs
calling init_mqueue_fs+0x0/0x9e @ 1
initcall init_mqueue_fs+0x0/0x9e returned 0 after 115 usecs
calling key_proc_init+0x0/0x37 @ 1
initcall key_proc_init+0x0/0x37 returned 0 after 13 usecs
calling crypto_wq_init+0x0/0x41 @ 1
initcall crypto_wq_init+0x0/0x41 returned 0 after 50 usecs
calling crypto_algapi_init+0x0/0xc @ 1
initcall crypto_algapi_init+0x0/0xc returned 0 after 27 usecs
calling skcipher_module_init+0x0/0x11 @ 1
initcall skcipher_module_init+0x0/0x11 returned 0 after 3 usecs
calling chainiv_module_init+0x0/0xf @ 1
initcall chainiv_module_init+0x0/0xf returned 0 after 5 usecs
calling eseqiv_module_init+0x0/0xf @ 1
initcall eseqiv_module_init+0x0/0xf returned 0 after 4 usecs
calling seqiv_module_init+0x0/0xf @ 1
initcall seqiv_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_user_init+0x0/0x42 @ 1
initcall crypto_user_init+0x0/0x42 returned 0 after 26 usecs
calling crypto_cmac_module_init+0x0/0xf @ 1
initcall crypto_cmac_module_init+0x0/0xf returned 0 after 4 usecs
calling hmac_module_init+0x0/0xf @ 1
initcall hmac_module_init+0x0/0xf returned 0 after 4 usecs
calling vmac_module_init+0x0/0xf @ 1
initcall vmac_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_xcbc_module_init+0x0/0xf @ 1
initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_null_mod_init+0x0/0x41 @ 1
initcall crypto_null_mod_init+0x0/0x41 returned 0 after 289 usecs
calling md4_mod_init+0x0/0xf @ 1
initcall md4_mod_init+0x0/0xf returned 0 after 184 usecs
calling md5_mod_init+0x0/0xf @ 1
initcall md5_mod_init+0x0/0xf returned 0 after 176 usecs
calling rmd128_mod_init+0x0/0xf @ 1
initcall rmd128_mod_init+0x0/0xf returned 0 after 210 usecs
calling rmd160_mod_init+0x0/0xf @ 1
initcall rmd160_mod_init+0x0/0xf returned 0 after 229 usecs
calling rmd256_mod_init+0x0/0xf @ 1
initcall rmd256_mod_init+0x0/0xf returned 0 after 198 usecs
calling rmd320_mod_init+0x0/0xf @ 1
initcall rmd320_mod_init+0x0/0xf returned 0 after 214 usecs
calling sha1_generic_mod_init+0x0/0xf @ 1
initcall sha1_generic_mod_init+0x0/0xf returned 0 after 175 usecs
calling sha256_generic_mod_init+0x0/0x14 @ 1
initcall sha256_generic_mod_init+0x0/0x14 returned 0 after 351 usecs
calling sha512_generic_mod_init+0x0/0x14 @ 1
initcall sha512_generic_mod_init+0x0/0x14 returned 0 after 545 usecs
calling wp512_mod_init+0x0/0x14 @ 1
initcall wp512_mod_init+0x0/0x14 returned 0 after 1128 usecs
calling crypto_ecb_module_init+0x0/0xf @ 1
initcall crypto_ecb_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_cbc_module_init+0x0/0xf @ 1
initcall crypto_cbc_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_pcbc_module_init+0x0/0xf @ 1
initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_module_init+0x0/0xf @ 1
initcall crypto_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_module_init+0x0/0xf @ 1
initcall crypto_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_ctr_module_init+0x0/0x33 @ 1
initcall crypto_ctr_module_init+0x0/0x33 returned 0 after 4 usecs
calling crypto_gcm_module_init+0x0/0x95 @ 1
initcall crypto_gcm_module_init+0x0/0x95 returned 0 after 5 usecs
calling crypto_ccm_module_init+0x0/0x4d @ 1
initcall crypto_ccm_module_init+0x0/0x4d returned 0 after 4 usecs
calling des_generic_mod_init+0x0/0x14 @ 1
initcall des_generic_mod_init+0x0/0x14 returned 0 after 249 usecs
calling fcrypt_mod_init+0x0/0xf @ 1
initcall fcrypt_mod_init+0x0/0xf returned 0 after 111 usecs
calling serpent_mod_init+0x0/0x14 @ 1
initcall serpent_mod_init+0x0/0x14 returned 0 after 250 usecs
calling aes_init+0x0/0xf @ 1
initcall aes_init+0x0/0xf returned 0 after 133 usecs
calling camellia_init+0x0/0xf @ 1
initcall camellia_init+0x0/0xf returned 0 after 126 usecs
calling cast5_mod_init+0x0/0xf @ 1
initcall cast5_mod_init+0x0/0xf returned 0 after 137 usecs
calling cast6_mod_init+0x0/0xf @ 1
initcall cast6_mod_init+0x0/0xf returned 0 after 139 usecs
calling arc4_init+0x0/0x14 @ 1
initcall arc4_init+0x0/0x14 returned 0 after 605 usecs
calling tea_mod_init+0x0/0x14 @ 1
initcall tea_mod_init+0x0/0x14 returned 0 after 329 usecs
calling anubis_mod_init+0x0/0xf @ 1
initcall anubis_mod_init+0x0/0xf returned 0 after 168 usecs
calling deflate_mod_init+0x0/0xf @ 1
initcall deflate_mod_init+0x0/0xf returned 0 after 527 usecs
calling zlib_mod_init+0x0/0xf @ 1
initcall zlib_mod_init+0x0/0xf returned 0 after 727 usecs
calling michael_mic_init+0x0/0xf @ 1
initcall michael_mic_init+0x0/0xf returned 0 after 234 usecs
calling crc32c_mod_init+0x0/0xf @ 1
initcall crc32c_mod_init+0x0/0xf returned 0 after 306 usecs
calling crc32_mod_init+0x0/0xf @ 1
alg: No test for crc32 (crc32-table)
initcall crc32_mod_init+0x0/0xf returned 0 after 609 usecs
calling crct10dif_mod_init+0x0/0xf @ 1
initcall crct10dif_mod_init+0x0/0xf returned 0 after 142 usecs
calling crypto_authenc_module_init+0x0/0xf @ 1
initcall crypto_authenc_module_init+0x0/0xf returned 0 after 4 usecs
calling crypto_authenc_esn_module_init+0x0/0xf @ 1
initcall crypto_authenc_esn_module_init+0x0/0xf returned 0 after 4 usecs
calling lzo_mod_init+0x0/0xf @ 1
initcall lzo_mod_init+0x0/0xf returned 0 after 107 usecs
calling lz4_mod_init+0x0/0xf @ 1
alg: No test for lz4 (lz4-generic)
initcall lz4_mod_init+0x0/0xf returned 0 after 271 usecs
calling lz4hc_mod_init+0x0/0xf @ 1
alg: No test for lz4hc (lz4hc-generic)
initcall lz4hc_mod_init+0x0/0xf returned 0 after 946 usecs
calling krng_mod_init+0x0/0xf @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0xf returned 0 after 1546 usecs
calling prng_mod_init+0x0/0x14 @ 1
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
initcall prng_mod_init+0x0/0x14 returned 0 after 8854 usecs
calling ghash_mod_init+0x0/0xf @ 1
initcall ghash_mod_init+0x0/0xf returned 0 after 198 usecs
calling af_alg_init+0x0/0x35 @ 1
NET: Registered protocol family 38
initcall af_alg_init+0x0/0x35 returned 0 after 1229 usecs
calling algif_hash_init+0x0/0xf @ 1
initcall algif_hash_init+0x0/0xf returned 0 after 13 usecs
calling asymmetric_key_init+0x0/0xf @ 1
Key type asymmetric registered
initcall asymmetric_key_init+0x0/0xf returned 0 after 1527 usecs
calling proc_genhd_init+0x0/0x44 @ 1
initcall proc_genhd_init+0x0/0x44 returned 0 after 27 usecs
calling bsg_init+0x0/0x154 @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
initcall bsg_init+0x0/0x154 returned 0 after 1127 usecs
calling noop_init+0x0/0xf @ 1
io scheduler noop registered (default)
initcall noop_init+0x0/0xf returned 0 after 928 usecs
calling deadline_init+0x0/0xf @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0xf returned 0 after 889 usecs
calling cfq_init+0x0/0x8b @ 1
io scheduler cfq registered
initcall cfq_init+0x0/0x8b returned 0 after 1019 usecs
calling test_kstrtox_init+0x0/0xb32 @ 1
initcall test_kstrtox_init+0x0/0xb32 returned -22 after 63 usecs
calling btree_module_init+0x0/0x2f @ 1
initcall btree_module_init+0x0/0x2f returned 0 after 18 usecs
calling crc_t10dif_mod_init+0x0/0x35 @ 1
initcall crc_t10dif_mod_init+0x0/0x35 returned 0 after 5 usecs
calling crc32test_init+0x0/0x339 @ 1
crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8
crc32: self tests passed, processed 225944 bytes in 0 nsec
crc32c: CRC_LE_BITS = 8
crc32c: self tests passed, processed 225944 bytes in 0 nsec
initcall crc32test_init+0x0/0x339 returned 0 after 6803 usecs
calling libcrc32c_mod_init+0x0/0x24 @ 1
initcall libcrc32c_mod_init+0x0/0x24 returned 0 after 5 usecs
calling init_kmp+0x0/0xf @ 1
initcall init_kmp+0x0/0xf returned 0 after 13 usecs
calling init_bm+0x0/0xf @ 1
initcall init_bm+0x0/0xf returned 0 after 4 usecs
calling init_fsm+0x0/0xf @ 1
initcall init_fsm+0x0/0xf returned 0 after 4 usecs
calling audit_classes_init+0x0/0x4f @ 1
initcall audit_classes_init+0x0/0x4f returned 0 after 28 usecs
calling err_inject_init+0x0/0x1e @ 1
initcall err_inject_init+0x0/0x1e returned 0 after 25 usecs
calling digsig_init+0x0/0x36 @ 1
initcall digsig_init+0x0/0x36 returned 0 after 5 usecs
calling rbtree_test_init+0x0/0x208 @ 1
rbtree testingrbtree testing -> 20477 cycles
-> 20477 cycles
augmented rbtree testingaugmented rbtree testing -> 28701 cycles
-> 28701 cycles
initcall rbtree_test_init+0x0/0x208 returned -11 after 2519126 usecs
calling bgpio_driver_init+0x0/0x11 @ 1
initcall bgpio_driver_init+0x0/0x11 returned 0 after 40 usecs
calling adnp_i2c_driver_init+0x0/0x11 @ 1
initcall adnp_i2c_driver_init+0x0/0x11 returned 0 after 52 usecs
calling adp5588_gpio_driver_init+0x0/0x11 @ 1
initcall adp5588_gpio_driver_init+0x0/0x11 returned 0 after 25 usecs
calling amd_gpio_init+0x0/0x155 @ 1
initcall amd_gpio_init+0x0/0x155 returned -19 after 19 usecs
calling bt8xxgpio_pci_driver_init+0x0/0x16 @ 1
initcall bt8xxgpio_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling cs5535_gpio_driver_init+0x0/0x11 @ 1
initcall cs5535_gpio_driver_init+0x0/0x11 returned 0 after 27 usecs
calling grgpio_driver_init+0x0/0x11 @ 1
initcall grgpio_driver_init+0x0/0x11 returned 0 after 27 usecs
calling ichx_gpio_driver_init+0x0/0x11 @ 1
initcall ichx_gpio_driver_init+0x0/0x11 returned 0 after 26 usecs
calling it8761e_gpio_init+0x0/0x180 @ 1
initcall it8761e_gpio_init+0x0/0x180 returned -19 after 46 usecs
calling ttl_driver_init+0x0/0x11 @ 1
initcall ttl_driver_init+0x0/0x11 returned 0 after 27 usecs
calling kempld_gpio_driver_init+0x0/0x11 @ 1
initcall kempld_gpio_driver_init+0x0/0x11 returned 0 after 27 usecs
calling lnw_gpio_init+0x0/0x16 @ 1
initcall lnw_gpio_init+0x0/0x16 returned 0 after 40 usecs
calling ioh_gpio_driver_init+0x0/0x16 @ 1
initcall ioh_gpio_driver_init+0x0/0x16 returned 0 after 32 usecs
calling pch_gpio_driver_init+0x0/0x16 @ 1
initcall pch_gpio_driver_init+0x0/0x16 returned 0 after 33 usecs
calling sch_gpio_driver_init+0x0/0x11 @ 1
initcall sch_gpio_driver_init+0x0/0x11 returned 0 after 33 usecs
calling sdv_gpio_driver_init+0x0/0x16 @ 1
initcall sdv_gpio_driver_init+0x0/0x16 returned 0 after 33 usecs
calling timbgpio_platform_driver_init+0x0/0x11 @ 1
initcall timbgpio_platform_driver_init+0x0/0x11 returned 0 after 26 usecs
calling ts5500_dio_driver_init+0x0/0x11 @ 1
initcall ts5500_dio_driver_init+0x0/0x11 returned 0 after 27 usecs
calling gpo_twl6040_driver_init+0x0/0x11 @ 1
initcall gpo_twl6040_driver_init+0x0/0x11 returned 0 after 27 usecs
calling vx855gpio_driver_init+0x0/0x11 @ 1
initcall vx855gpio_driver_init+0x0/0x11 returned 0 after 33 usecs
calling pca9685_i2c_driver_init+0x0/0x11 @ 1
initcall pca9685_i2c_driver_init+0x0/0x11 returned 0 after 26 usecs
calling twl_pwmled_driver_init+0x0/0x11 @ 1
initcall twl_pwmled_driver_init+0x0/0x11 returned 0 after 27 usecs
calling pci_proc_init+0x0/0x64 @ 1
initcall pci_proc_init+0x0/0x64 returned 0 after 222 usecs
calling pci_hotplug_init+0x0/0x4f @ 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x4f returned 0 after 500 usecs
calling cpcihp_generic_init+0x0/0x428 @ 1
cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
cpcihp_generic: not configured, disabling.
initcall cpcihp_generic_init+0x0/0x428 returned -22 after 2431 usecs
calling shpcd_init+0x0/0x5f @ 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x5f returned 0 after 750 usecs
calling fb_console_init+0x0/0x108 @ 1
initcall fb_console_init+0x0/0x108 returned 0 after 66 usecs
calling pm860x_backlight_driver_init+0x0/0x11 @ 1
initcall pm860x_backlight_driver_init+0x0/0x11 returned 0 after 27 usecs
calling bd6107_driver_init+0x0/0x11 @ 1
initcall bd6107_driver_init+0x0/0x11 returned 0 after 31 usecs
calling da903x_backlight_driver_init+0x0/0x11 @ 1
initcall da903x_backlight_driver_init+0x0/0x11 returned 0 after 27 usecs
calling gpio_backlight_driver_init+0x0/0x11 @ 1
initcall gpio_backlight_driver_init+0x0/0x11 returned 0 after 26 usecs
calling lm3533_bl_driver_init+0x0/0x11 @ 1
initcall lm3533_bl_driver_init+0x0/0x11 returned 0 after 27 usecs
calling lm3630_i2c_driver_init+0x0/0x11 @ 1
initcall lm3630_i2c_driver_init+0x0/0x11 returned 0 after 26 usecs
calling lp8788_bl_driver_init+0x0/0x11 @ 1
initcall lp8788_bl_driver_init+0x0/0x11 returned 0 after 27 usecs
calling ot200_backlight_driver_init+0x0/0x11 @ 1
initcall ot200_backlight_driver_init+0x0/0x11 returned 0 after 27 usecs
calling pandora_backlight_driver_init+0x0/0x11 @ 1
initcall pandora_backlight_driver_init+0x0/0x11 returned 0 after 26 usecs
calling kb3886_init+0x0/0xa @ 1
initcall kb3886_init+0x0/0xa returned -19 after 4 usecs
calling tps65217_bl_driver_init+0x0/0x11 @ 1
initcall tps65217_bl_driver_init+0x0/0x11 returned 0 after 27 usecs
calling arcfb_init+0x0/0x66 @ 1
initcall arcfb_init+0x0/0x66 returned -6 after 4 usecs
calling pm2fb_init+0x0/0x120 @ 1
initcall pm2fb_init+0x0/0x120 returned 0 after 40 usecs
calling i740fb_init+0x0/0x99 @ 1
initcall i740fb_init+0x0/0x99 returned 0 after 34 usecs
calling matroxfb_init+0x0/0x24b @ 1
initcall matroxfb_init+0x0/0x24b returned 0 after 49 usecs
calling i2c_matroxfb_init+0x0/0x29 @ 1
initcall i2c_matroxfb_init+0x0/0x29 returned 0 after 4 usecs
calling rivafb_init+0x0/0x18e @ 1
rivafb_setup START
initcall rivafb_init+0x0/0x18e returned 0 after 516 usecs
calling nvidiafb_init+0x0/0x288 @ 1
nvidiafb_setup START
initcall nvidiafb_init+0x0/0x288 returned 0 after 842 usecs
calling aty128fb_init+0x0/0x111 @ 1
initcall aty128fb_init+0x0/0x111 returned 0 after 38 usecs
calling savagefb_init+0x0/0x5e @ 1
initcall savagefb_init+0x0/0x5e returned 0 after 41 usecs
calling neofb_init+0x0/0x11d @ 1
initcall neofb_init+0x0/0x11d returned 0 after 34 usecs
calling tdfxfb_init+0x0/0x105 @ 1
initcall tdfxfb_init+0x0/0x105 returned 0 after 33 usecs
calling imsttfb_init+0x0/0xdd @ 1
initcall imsttfb_init+0x0/0xdd returned 0 after 34 usecs
calling vt8623fb_init+0x0/0x6c @ 1
initcall vt8623fb_init+0x0/0x6c returned 0 after 33 usecs
calling tridentfb_init+0x0/0x1db @ 1
initcall tridentfb_init+0x0/0x1db returned 0 after 36 usecs
calling vmlfb_init+0x0/0x82 @ 1
vmlfb: initializing
initcall vmlfb_init+0x0/0x82 returned 0 after 679 usecs
calling cr_pll_init+0x0/0xd3 @ 1
Could not find Carillo Ranch MCH device.
initcall cr_pll_init+0x0/0xd3 returned -19 after 1266 usecs
calling s3fb_init+0x0/0xf1 @ 1
initcall s3fb_init+0x0/0xf1 returned 0 after 34 usecs
calling arkfb_init+0x0/0x6c @ 1
initcall arkfb_init+0x0/0x6c returned 0 after 33 usecs
calling hecubafb_init+0x0/0x11 @ 1
initcall hecubafb_init+0x0/0x11 returned 0 after 33 usecs
calling n411_init+0x0/0x7f @ 1
no IO addresses supplied
initcall n411_init+0x0/0x7f returned -22 after 1501 usecs
calling hgafb_init+0x0/0x6f @ 1
hgafb: HGA card not detected.
hgafb: probe of hgafb.0 failed with error -22
initcall hgafb_init+0x0/0x6f returned 0 after 2499 usecs
calling sstfb_init+0x0/0x176 @ 1
initcall sstfb_init+0x0/0x176 returned 0 after 40 usecs
calling s1d13xxxfb_init+0x0/0x28 @ 1
initcall s1d13xxxfb_init+0x0/0x28 returned 0 after 27 usecs
calling sm501fb_driver_init+0x0/0x11 @ 1
initcall sm501fb_driver_init+0x0/0x11 returned 0 after 26 usecs
calling ufx_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver smscufx
initcall ufx_driver_init+0x0/0x16 returned 0 after 670 usecs
calling carminefb_init+0x0/0x33 @ 1
initcall carminefb_init+0x0/0x33 returned 0 after 33 usecs
calling ssd1307fb_driver_init+0x0/0x11 @ 1
initcall ssd1307fb_driver_init+0x0/0x11 returned 0 after 40 usecs
calling ipmi_init_msghandler_mod+0x0/0xc @ 1
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 1071 usecs
calling init_ipmi_devintf+0x0/0xf3 @ 1
ipmi device interface
initcall init_ipmi_devintf+0x0/0xf3 returned 0 after 1022 usecs
calling init_ipmi_si+0x0/0x4e6 @ 1
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machineipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
Switched to clocksource tsc
ipmi_si: Adding default-specified smic state machineipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machineipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
initcall init_ipmi_si+0x0/0x4e6 returned -19 after 82793 usecs
calling ipmi_wdog_init+0x0/0x117 @ 1
IPMI Watchdog: driver initialized
initcall ipmi_wdog_init+0x0/0x117 returned 0 after 5941 usecs
calling ipmi_poweroff_init+0x0/0x7f @ 1
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
initcall ipmi_poweroff_init+0x0/0x7f returned 0 after 12394 usecs
calling pnpbios_thread_init+0x0/0x6c @ 1
initcall pnpbios_thread_init+0x0/0x6c returned 0 after 31 usecs
calling isapnp_init+0x0/0x5de @ 1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
initcall isapnp_init+0x0/0x5de returned 0 after 359039 usecs
calling virtio_mmio_init+0x0/0x11 @ 1
initcall virtio_mmio_init+0x0/0x11 returned 0 after 23 usecs
calling virtio_pci_driver_init+0x0/0x16 @ 1
initcall virtio_pci_driver_init+0x0/0x16 returned 0 after 30 usecs
calling virtio_balloon_driver_init+0x0/0xf @ 1
initcall virtio_balloon_driver_init+0x0/0xf returned 0 after 21 usecs
calling regulator_virtual_consumer_driver_init+0x0/0x11 @ 1
initcall regulator_virtual_consumer_driver_init+0x0/0x11 returned 0 after 24 usecs
calling regulator_userspace_consumer_driver_init+0x0/0x11 @ 1
initcall regulator_userspace_consumer_driver_init+0x0/0x11 returned 0 after 23 usecs
calling pm800_regulator_driver_init+0x0/0x11 @ 1
initcall pm800_regulator_driver_init+0x0/0x11 returned 0 after 23 usecs
calling da9210_regulator_driver_init+0x0/0x11 @ 1
initcall da9210_regulator_driver_init+0x0/0x11 returned 0 after 22 usecs
calling lp3971_i2c_driver_init+0x0/0x11 @ 1
initcall lp3971_i2c_driver_init+0x0/0x11 returned 0 after 21 usecs
calling pfuze_driver_init+0x0/0x11 @ 1
initcall pfuze_driver_init+0x0/0x11 returned 0 after 29 usecs
calling wm8994_ldo_driver_init+0x0/0x11 @ 1
initcall wm8994_ldo_driver_init+0x0/0x11 returned 0 after 23 usecs
calling pty_init+0x0/0x357 @ 1
initcall pty_init+0x0/0x357 returned 0 after 34834 usecs
calling sysrq_init+0x0/0xb6 @ 1
initcall sysrq_init+0x0/0xb6 returned 0 after 20 usecs
calling gsm_init+0x0/0x141 @ 1
initcall gsm_init+0x0/0x141 returned 0 after 44 usecs
calling serial8250_init+0x0/0x15a @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
initcall serial8250_init+0x0/0x15a returned 0 after 42661 usecs
calling serial_pci_driver_init+0x0/0x16 @ 1
initcall serial_pci_driver_init+0x0/0x16 returned 0 after 77 usecs
calling dw8250_platform_driver_init+0x0/0x11 @ 1
initcall dw8250_platform_driver_init+0x0/0x11 returned 0 after 25 usecs
calling ulite_init+0x0/0x87 @ 1
initcall ulite_init+0x0/0x87 returned 0 after 53 usecs
calling altera_uart_init+0x0/0x35 @ 1
initcall altera_uart_init+0x0/0x35 returned 0 after 52 usecs
calling asc_init+0x0/0x43 @ 1
STMicroelectronics ASC driver initialized
initcall asc_init+0x0/0x43 returned 0 after 7345 usecs
calling init_kgdboc+0x0/0x15 @ 1
initcall init_kgdboc+0x0/0x15 returned 0 after 1 usecs
calling timbuart_platform_driver_init+0x0/0x11 @ 1
initcall timbuart_platform_driver_init+0x0/0x11 returned 0 after 24 usecs
calling altera_jtaguart_init+0x0/0x35 @ 1
initcall altera_jtaguart_init+0x0/0x35 returned 0 after 43 usecs
calling hsu_pci_init+0x0/0x2b1 @ 1
initcall hsu_pci_init+0x0/0x2b1 returned 0 after 210 usecs
calling pch_uart_module_init+0x0/0x3a @ 1
initcall pch_uart_module_init+0x0/0x3a returned 0 after 68 usecs
calling xuartps_init+0x0/0x35 @ 1
initcall xuartps_init+0x0/0x35 returned 0 after 45 usecs
calling rp2_uart_init+0x0/0x3a @ 1
initcall rp2_uart_init+0x0/0x3a returned 0 after 106 usecs
calling lpuart_serial_init+0x0/0x43 @ 1
serial: Freescale lpuart driver
initcall lpuart_serial_init+0x0/0x43 returned 0 after 5667 usecs
calling nozomi_init+0x0/0x100 @ 1
Initializing Nozomi driver 2.1d
initcall nozomi_init+0x0/0x100 returned 0 after 5696 usecs
calling rand_initialize+0x0/0x25 @ 1
initcall rand_initialize+0x0/0x25 returned 0 after 43 usecs
calling init+0x0/0xf3 @ 1
initcall init+0x0/0xf3 returned 0 after 77 usecs
calling raw_init+0x0/0x135 @ 1
initcall raw_init+0x0/0x135 returned 0 after 160 usecs
calling lp_init_module+0x0/0x210 @ 1
lp: driver loaded but no devices found
initcall lp_init_module+0x0/0x210 returned 0 after 6790 usecs
calling dtlk_init+0x0/0x1d1 @ 1
DoubleTalk PC - not found
initcall dtlk_init+0x0/0x1d1 returned -19 after 4597 usecs
calling applicom_init+0x0/0x484 @ 1
Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
ac.o: No PCI boards found.
ac.o: For an ISA board you must supply memory and irq parameters.
initcall applicom_init+0x0/0x484 returned -6 after 27475 usecs
calling i8k_init+0x0/0x30d @ 1
initcall i8k_init+0x0/0x30d returned -19 after 0 usecs
calling timeriomem_rng_driver_init+0x0/0x11 @ 1
initcall timeriomem_rng_driver_init+0x0/0x11 returned 0 after 24 usecs
calling mod_init+0x0/0x1dc @ 1
initcall mod_init+0x0/0x1dc returned -19 after 111 usecs
calling mod_init+0x0/0x11a @ 1
initcall mod_init+0x0/0x11a returned -19 after 11 usecs
calling mod_init+0x0/0x9a @ 1
initcall mod_init+0x0/0x9a returned -19 after 8 usecs
calling mod_init+0x0/0x48 @ 1
initcall mod_init+0x0/0x48 returned -19 after 0 usecs
calling virtio_rng_driver_init+0x0/0xf @ 1
initcall virtio_rng_driver_init+0x0/0xf returned 0 after 21 usecs
calling rng_init+0x0/0xf @ 1
initcall rng_init+0x0/0xf returned 0 after 136 usecs
calling ppdev_init+0x0/0xba @ 1
ppdev: user-space parallel port driver
initcall ppdev_init+0x0/0xba returned 0 after 6789 usecs
calling pc8736x_gpio_init+0x0/0x2dd @ 1
platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
platform pc8736x_gpio.0: no device found
initcall pc8736x_gpio_init+0x0/0x2dd returned -19 after 18607 usecs
calling nsc_gpio_init+0x0/0x14 @ 1
nsc_gpio initializing
initcall nsc_gpio_init+0x0/0x14 returned 0 after 3910 usecs
calling tlclk_init+0x0/0x1d9 @ 1
telclk_interrupt = 0xf non-mcpbl0010 hw.
initcall tlclk_init+0x0/0x1d9 returned -6 after 7128 usecs
calling mwave_init+0x0/0x1e5 @ 1
smapi::smapi_init, ERROR invalid usSmapiID
mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
mwave: mwavedd::mwave_init: Error: Failed to initialize board data
mwave: mwavedd::mwave_init: Error: Failed to initialize
initcall mwave_init+0x0/0x1e5 returned -5 after 44250 usecs
calling agp_init+0x0/0x32 @ 1
Linux agpgart interface v0.103
initcall agp_init+0x0/0x32 returned 0 after 5434 usecs
calling agp_ali_init+0x0/0x27 @ 1
initcall agp_ali_init+0x0/0x27 returned 0 after 37 usecs
calling agp_intel_init+0x0/0x27 @ 1
initcall agp_intel_init+0x0/0x27 returned 0 after 34 usecs
calling agp_nvidia_init+0x0/0x27 @ 1
initcall agp_nvidia_init+0x0/0x27 returned 0 after 36 usecs
calling agp_sis_init+0x0/0x27 @ 1
initcall agp_sis_init+0x0/0x27 returned 0 after 31 usecs
calling agp_serverworks_init+0x0/0x27 @ 1
initcall agp_serverworks_init+0x0/0x27 returned 0 after 29 usecs
calling agp_via_init+0x0/0x27 @ 1
initcall agp_via_init+0x0/0x27 returned 0 after 33 usecs
calling synclink_cs_init+0x0/0x103 @ 1
SyncLink PC Card driver $Revision: 4.34 $, tty major#242
initcall synclink_cs_init+0x0/0x103 returned 0 after 9837 usecs
calling cmm_init+0x0/0xa7 @ 1
initcall cmm_init+0x0/0xa7 returned 0 after 53 usecs
calling cm4040_init+0x0/0xa7 @ 1
initcall cm4040_init+0x0/0xa7 returned 0 after 55 usecs
calling hangcheck_init+0x0/0xab @ 1
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
initcall hangcheck_init+0x0/0xab returned 0 after 21193 usecs
calling init_tis+0x0/0x9d @ 1
initcall init_tis+0x0/0x9d returned 0 after 32 usecs
calling tpm_tis_i2c_driver_init+0x0/0x11 @ 1
initcall tpm_tis_i2c_driver_init+0x0/0x11 returned 0 after 35 usecs
calling init_nsc+0x0/0x570 @ 1
initcall init_nsc+0x0/0x570 returned -19 after 10 usecs
calling init_inf+0x0/0xf @ 1
initcall init_inf+0x0/0xf returned 0 after 23 usecs
calling i810fb_init+0x0/0x33e @ 1
initcall i810fb_init+0x0/0x33e returned 0 after 31 usecs
calling parport_default_proc_register+0x0/0x16 @ 1
initcall parport_default_proc_register+0x0/0x16 returned 0 after 24 usecs
calling parport_pc_init+0x0/0x336 @ 1
IT8712 SuperIO detected.
parport_pc 00:0e: reported by Plug and Play BIOS
parport0: PC-style at 0x378parport0: PC-style at 0x378 (0x778) (0x778), irq 7, irq 7 [ [PCSPPPCSPP,TRISTATE,TRISTATE]
]
lp0: using parport0 (interrupt-driven).
initcall parport_pc_init+0x0/0x336 returned 0 after 110351 usecs
calling parport_serial_init+0x0/0x16 @ 1
initcall parport_serial_init+0x0/0x16 returned 0 after 35 usecs
calling parport_cs_driver_init+0x0/0xf @ 1
initcall parport_cs_driver_init+0x0/0xf returned 0 after 24 usecs
calling axdrv_init+0x0/0x11 @ 1
initcall axdrv_init+0x0/0x11 returned 0 after 25 usecs
calling topology_sysfs_init+0x0/0x19 @ 1
initcall topology_sysfs_init+0x0/0x19 returned 0 after 10 usecs
calling isa_bus_init+0x0/0x33 @ 1
initcall isa_bus_init+0x0/0x33 returned 0 after 43 usecs
calling floppy_init+0x0/0x13 @ 1
initcall floppy_init+0x0/0x13 returned 0 after 15 usecs
calling loop_init+0x0/0x129 @ 1
loop: module loaded
initcall loop_init+0x0/0x129 returned 0 after 5479 usecs
calling cpqarray_init+0x0/0x26d @ 1
Compaq SMART2 Driver (v 2.6.0)
initcall cpqarray_init+0x0/0x26d returned -19 after 5496 usecs
calling cciss_init+0x0/0x9b @ 1
HP CISS Driver (v 3.6.26)
calling 1_floppy_async_init+0x0/0xa @ 6
Floppy drive(s):Floppy drive(s): fd0 is 1.44M fd0 is 1.44M
initcall cciss_init+0x0/0x9b returned 0 after 18234 usecs
calling pkt_init+0x0/0x169 @ 1
initcall pkt_init+0x0/0x169 returned 0 after 181 usecs
calling osdblk_init+0x0/0x7a @ 1
initcall osdblk_init+0x0/0x7a returned 0 after 27 usecs
calling mm_init+0x0/0x168 @ 1
MM: desc_per_page = 128
initcall mm_init+0x0/0x168 returned 0 after 4250 usecs
calling nbd_init+0x0/0x323 @ 1
nbd: registered device at major 43
initcall nbd_init+0x0/0x323 returned 0 after 10245 usecs
calling init+0x0/0x8b @ 1
initcall init+0x0/0x8b returned 0 after 39 usecs
calling carm_init+0x0/0x16 @ 1
initcall carm_init+0x0/0x16 returned 0 after 37 usecs
calling mtip_init+0x0/0x13e @ 1
mtip32xx Version 1.2.6os3
initcall mtip_init+0x0/0x13e returned 0 after 4670 usecs
calling ibmasm_init+0x0/0x69 @ 1
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
initcall ibmasm_init+0x0/0x69 returned 0 after 10344 usecs
calling dummy_irq_init+0x0/0x75 @ 1
dummy-irq: no IRQ given. Use irq=N
initcall dummy_irq_init+0x0/0x75 returned -5 after 6280 usecs
calling ics932s401_driver_init+0x0/0x11 @ 1
initcall ics932s401_driver_init+0x0/0x11 returned 0 after 28 usecs
calling lkdtm_module_init+0x0/0x1b4 @ 1
lkdtm: No crash points registered, enable through debugfs
initcall lkdtm_module_init+0x0/0x1b4 returned 0 after 10005 usecs
calling tifm_7xx1_driver_init+0x0/0x16 @ 1
initcall tifm_7xx1_driver_init+0x0/0x16 returned 0 after 39 usecs
calling phantom_init+0x0/0xed @ 1
Phantom Linux Driver, version n0.9.8, init OK
initcall phantom_init+0x0/0xed returned 0 after 7975 usecs
calling bh1780_driver_init+0x0/0x11 @ 1
initcall bh1780_driver_init+0x0/0x11 returned 0 after 30 usecs
calling apds990x_driver_init+0x0/0x11 @ 1
initcall apds990x_driver_init+0x0/0x11 returned 0 after 29 usecs
calling ioc4_init+0x0/0x16 @ 1
initcall ioc4_init+0x0/0x16 returned 0 after 30 usecs
calling enclosure_init+0x0/0x14 @ 1
initcall enclosure_init+0x0/0x14 returned 0 after 22 usecs
calling init_kgdbts+0x0/0x15 @ 1
initcall init_kgdbts+0x0/0x15 returned 0 after 0 usecs
calling cs5535_mfgpt_init+0x0/0x11 @ 1
initcall cs5535_mfgpt_init+0x0/0x11 returned 0 after 32 usecs
calling ilo_init+0x0/0x82 @ 1
initcall ilo_init+0x0/0x82 returned 0 after 78 usecs
calling isl29020_driver_init+0x0/0x11 @ 1
initcall isl29020_driver_init+0x0/0x11 returned 0 after 30 usecs
calling tsl2550_driver_init+0x0/0x11 @ 1
initcall tsl2550_driver_init+0x0/0x11 returned 0 after 22 usecs
calling ds1682_driver_init+0x0/0x11 @ 1
initcall ds1682_driver_init+0x0/0x11 returned 0 after 21 usecs
calling at24_init+0x0/0x43 @ 1
initcall at24_init+0x0/0x43 returned 0 after 22 usecs
calling eeprom_driver_init+0x0/0x11 @ 1
initcall eeprom_driver_init+0x0/0x11 returned 0 after 21 usecs
calling cb710_init_module+0x0/0x16 @ 1
initcall cb710_init_module+0x0/0x16 returned 0 after 32 usecs
calling kim_platform_driver_init+0x0/0x11 @ 1
initcall kim_platform_driver_init+0x0/0x11 returned 0 after 24 usecs
calling fsa9480_i2c_driver_init+0x0/0x11 @ 1
initcall fsa9480_i2c_driver_init+0x0/0x11 returned 0 after 22 usecs
calling vmci_drv_init+0x0/0xcf @ 1
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=60)
Initialized host personality
initcall vmci_drv_init+0x0/0xcf returned 0 after 24080 usecs
calling sm501_base_init+0x0/0x22 @ 1
initcall sm501_base_init+0x0/0x22 returned 0 after 58 usecs
calling cros_ec_driver_init+0x0/0x11 @ 1
initcall cros_ec_driver_init+0x0/0x11 returned 0 after 23 usecs
calling rtsx_pci_driver_init+0x0/0x16 @ 1
initcall rtsx_pci_driver_init+0x0/0x16 returned 0 after 39 usecs
calling pasic3_driver_init+0x0/0x14 @ 1
initcall pasic3_driver_init+0x0/0x14 returned -19 after 44 usecs
calling htcpld_core_init+0x0/0x24 @ 1
initcall htcpld_core_init+0x0/0x24 returned -19 after 63 usecs
calling ti_tscadc_driver_init+0x0/0x11 @ 1
initcall ti_tscadc_driver_init+0x0/0x11 returned 0 after 24 usecs
calling wm8994_i2c_driver_init+0x0/0x11 @ 1
initcall wm8994_i2c_driver_init+0x0/0x11 returned 0 after 57 usecs
calling twl_driver_init+0x0/0x11 @ 1
initcall twl_driver_init+0x0/0x11 returned 0 after 41 usecs
calling twl4030_madc_driver_init+0x0/0x11 @ 1
initcall twl4030_madc_driver_init+0x0/0x11 returned 0 after 34 usecs
calling twl4030_audio_driver_init+0x0/0x11 @ 1
initcall twl4030_audio_driver_init+0x0/0x11 returned 0 after 24 usecs
calling twl6040_driver_init+0x0/0x11 @ 1
initcall twl6040_driver_init+0x0/0x11 returned 0 after 22 usecs
calling timberdale_pci_driver_init+0x0/0x16 @ 1
initcall timberdale_pci_driver_init+0x0/0x16 returned 0 after 30 usecs
calling kempld_init+0x0/0x5f @ 1
initcall kempld_init+0x0/0x5f returned -19 after 0 usecs
calling lpc_sch_driver_init+0x0/0x16 @ 1
initcall lpc_sch_driver_init+0x0/0x16 returned 0 after 36 usecs
calling lpc_ich_driver_init+0x0/0x16 @ 1
initcall lpc_ich_driver_init+0x0/0x16 returned 0 after 49 usecs
calling rdc321x_sb_driver_init+0x0/0x16 @ 1
initcall rdc321x_sb_driver_init+0x0/0x16 returned 0 after 30 usecs
calling cmodio_pci_driver_init+0x0/0x16 @ 1
initcall cmodio_pci_driver_init+0x0/0x16 returned 0 after 37 usecs
calling vx855_pci_driver_init+0x0/0x16 @ 1
initcall vx855_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling si476x_core_driver_init+0x0/0x11 @ 1
initcall si476x_core_driver_init+0x0/0x11 returned 0 after 22 usecs
calling cs5535_mfd_driver_init+0x0/0x16 @ 1
initcall cs5535_mfd_driver_init+0x0/0x16 returned 0 after 37 usecs
calling vprbrd_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver viperboard
initcall vprbrd_driver_init+0x0/0x16 returned 0 after 8989 usecs
calling nfcwilink_driver_init+0x0/0x11 @ 1
initcall nfcwilink_driver_init+0x0/0x11 returned 0 after 23 usecs
calling scsi_tgt_init+0x0/0x9d @ 1
FDC 0 is a post-1991 82077
initcall scsi_tgt_init+0x0/0x9d returned 0 after 5476 usecs
calling raid_init+0x0/0xf @ 1
initcall raid_init+0x0/0xf returned 0 after 23 usecs
calling spi_transport_init+0x0/0x79 @ 1
initcall spi_transport_init+0x0/0x79 returned 0 after 46 usecs
calling fc_transport_init+0x0/0x71 @ 1
initcall fc_transport_init+0x0/0x71 returned 0 after 93 usecs
calling iscsi_transport_init+0x0/0x199 @ 1
Loading iSCSI transport class v2.0-870.
initcall iscsi_transport_init+0x0/0x199 returned 0 after 7239 usecs
calling sas_transport_init+0x0/0x9f @ 1
initcall sas_transport_init+0x0/0x9f returned 0 after 127 usecs
calling sas_class_init+0x0/0x38 @ 1
initcall sas_class_init+0x0/0x38 returned 0 after 14 usecs
calling srp_transport_init+0x0/0x33 @ 1
initcall srp_transport_init+0x0/0x33 returned 0 after 43 usecs
calling scsi_dh_init+0x0/0x35 @ 1
initcall scsi_dh_init+0x0/0x35 returned 0 after 1 usecs
calling rdac_init+0x0/0x85 @ 1
rdac: device handler registered
initcall rdac_init+0x0/0x85 returned 0 after 5661 usecs
calling hp_sw_init+0x0/0xf @ 1
hp_sw: device handler registered
initcall hp_sw_init+0x0/0xf returned 0 after 5773 usecs
calling clariion_init+0x0/0x32 @ 1
emc: device handler registered
initcall clariion_init+0x0/0x32 returned 0 after 5434 usecs
calling alua_init+0x0/0x32 @ 1
alua: device handler registered
initcall alua_init+0x0/0x32 returned 0 after 5603 usecs
calling libfc_init+0x0/0x37 @ 1
initcall libfc_init+0x0/0x37 returned 0 after 152 usecs
calling libfcoe_init+0x0/0x23 @ 1
initcall libfcoe_init+0x0/0x23 returned 0 after 37 usecs
calling fnic_init_module+0x0/0x25d @ 1
fnic: Cisco FCoE HBA Driver, ver 1.5.0.23
fnic: Successfully Initialized Trace Buffer
initcall fnic_init_module+0x0/0x25d returned 0 after 15159 usecs
calling bnx2fc_mod_init+0x0/0x255 @ 1
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.14 (Mar 08, 2013)
initcall 1_floppy_async_init+0x0/0xa returned 0 after 1339307 usecs
initcall bnx2fc_mod_init+0x0/0x255 returned 0 after 24511 usecs
calling iscsi_sw_tcp_init+0x0/0x43 @ 1
iscsi: registered transport (tcp)
initcall iscsi_sw_tcp_init+0x0/0x43 returned 0 after 5942 usecs
calling arcmsr_module_init+0x0/0x16 @ 1
initcall arcmsr_module_init+0x0/0x16 returned 0 after 35 usecs
calling init_this_scsi_driver+0x0/0xc6 @ 1
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 389 usecs
calling aha152x_init+0x0/0x615 @ 1
initcall aha152x_init+0x0/0x615 returned -19 after 67 usecs
calling ahc_linux_init+0x0/0x5a @ 1
initcall ahc_linux_init+0x0/0x5a returned 0 after 52 usecs
calling ahd_linux_init+0x0/0x6c @ 1
initcall ahd_linux_init+0x0/0x6c returned 0 after 55 usecs
calling aac_init+0x0/0x76 @ 1
Adaptec aacraid driver 1.2-0[30200]-ms
initcall aac_init+0x0/0x76 returned 0 after 6836 usecs
calling aic94xx_init+0x0/0x12d @ 1
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
initcall aic94xx_init+0x0/0x12d returned 0 after 10762 usecs
calling pm8001_init+0x0/0x9a @ 1
initcall pm8001_init+0x0/0x9a returned 0 after 58 usecs
calling ips_module_init+0x0/0x2f3 @ 1
initcall ips_module_init+0x0/0x2f3 returned -19 after 65 usecs
calling init_this_scsi_driver+0x0/0xc6 @ 1
scsi: <fdomain> Detection failed (no card)
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 7465 usecs
calling init_this_scsi_driver+0x0/0xc6 @ 1
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 3 usecs
calling init_this_scsi_driver+0x0/0xc6 @ 1
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 1 usecs
calling init_this_scsi_driver+0x0/0xc6 @ 1
NCR53c406a: no available ports found
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 6450 usecs
calling init_this_scsi_driver+0x0/0xc6 @ 1
sym53c416.c: Version 1.0.0-ac
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 5277 usecs
calling qla1280_init+0x0/0x16 @ 1
initcall qla1280_init+0x0/0x16 returned 0 after 30 usecs
calling qla2x00_module_init+0x0/0x242 @ 1
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
initcall qla2x00_module_init+0x0/0x242 returned 0 after 13430 usecs
calling tcm_qla2xxx_init+0x0/0x29d @ 1
initcall tcm_qla2xxx_init+0x0/0x29d returned 0 after 94 usecs
calling qla4xxx_module_init+0x0/0xcc @ 1
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
initcall qla4xxx_module_init+0x0/0xcc returned 0 after 10868 usecs
calling lpfc_init+0x0/0xf0 @ 1
Emulex LightPulse Fibre Channel SCSI driver 8.3.42
Copyright(c) 2004-2013 Emulex. All rights reserved.
initcall lpfc_init+0x0/0xf0 returned 0 after 18119 usecs
calling bfad_init+0x0/0xab @ 1
Brocade BFA FC/FCOE SCSI driver - version: 3.2.21.1
initcall bfad_init+0x0/0xab returned 0 after 9048 usecs
calling init_this_scsi_driver+0x0/0xc6 @ 1
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 2 usecs
calling dmx3191d_init+0x0/0x16 @ 1
initcall dmx3191d_init+0x0/0x16 returned 0 after 38 usecs
calling hpsa_init+0x0/0x16 @ 1
initcall hpsa_init+0x0/0x16 returned 0 after 43 usecs
calling sym2_init+0x0/0xe0 @ 1
initcall sym2_init+0x0/0xe0 returned 0 after 39 usecs
calling init_this_scsi_driver+0x0/0xc6 @ 1
Failed initialization of WD-7000 SCSI card!
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 28676 usecs
calling init_this_scsi_driver+0x0/0xc6 @ 1
initcall init_this_scsi_driver+0x0/0xc6 returned -19 after 30939 usecs
calling dc395x_module_init+0x0/0x16 @ 1
initcall dc395x_module_init+0x0/0x16 returned 0 after 31 usecs
calling dc390_module_init+0x0/0x8f @ 1
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
initcall dc390_module_init+0x0/0x8f returned 0 after 22071 usecs
calling megaraid_init+0x0/0xae @ 1
initcall megaraid_init+0x0/0xae returned 0 after 57 usecs
calling megasas_init+0x0/0x18e @ 1
megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
initcall megasas_init+0x0/0x18e returned 0 after 9887 usecs
calling _scsih_init+0x0/0x154 @ 1
mpt2sas version 16.100.00.00 loaded
initcall _scsih_init+0x0/0x154 returned 0 after 6401 usecs
calling _scsih_init+0x0/0x154 @ 1
mpt3sas version 02.100.00.00 loaded
initcall _scsih_init+0x0/0x154 returned 0 after 6407 usecs
calling ufshcd_pci_driver_init+0x0/0x16 @ 1
initcall ufshcd_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling ufshcd_pltfrm_driver_init+0x0/0x11 @ 1
initcall ufshcd_pltfrm_driver_init+0x0/0x11 returned 0 after 34 usecs
calling gdth_init+0x0/0x7a5 @ 1
GDT-HA: Storage RAID Controller Driver. Version: 3.05
initcall gdth_init+0x0/0x7a5 returned 0 after 9365 usecs
calling initio_init_driver+0x0/0x16 @ 1
initcall initio_init_driver+0x0/0x16 returned 0 after 31 usecs
calling inia100_init+0x0/0x16 @ 1
initcall inia100_init+0x0/0x16 returned 0 after 30 usecs
calling tw_init+0x0/0x2d @ 1
3ware Storage Controller device driver for Linux v1.26.02.003.
initcall tw_init+0x0/0x2d returned 0 after 10888 usecs
calling twa_init+0x0/0x2d @ 1
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
initcall twa_init+0x0/0x2d returned 0 after 11728 usecs
calling imm_driver_init+0x0/0x26 @ 1
imm: Version 2.05 (for Linux 2.4.0)
initcall imm_driver_init+0x0/0x26 returned 0 after 6646 usecs
calling init_nsp32+0x0/0x3d @ 1
nsp32: loading...
initcall init_nsp32+0x0/0x3d returned 0 after 3265 usecs
calling ipr_init+0x0/0x3f @ 1
ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012)
initcall ipr_init+0x0/0x3f returned 0 after 12748 usecs
calling hptiop_module_init+0x0/0x35 @ 1
RocketRAID 3xxx/4xxx Controller driver v1.8
initcall hptiop_module_init+0x0/0x35 returned 0 after 7669 usecs
calling stex_init+0x0/0x2d @ 1
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
initcall stex_init+0x0/0x2d returned 0 after 9360 usecs
calling libcxgbi_init_module+0x0/0x17a @ 1
Clocksource tsc unstable (delta = 2830721179 ns)
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
initcall libcxgbi_init_module+0x0/0x17a returned 0 after 23559 usecs
calling cxgb4i_init_module+0x0/0x40 @ 1
Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4
iscsi: registered transport (cxgb4i)
initcall cxgb4i_init_module+0x0/0x40 returned 0 after 13588 usecs
calling beiscsi_module_init+0x0/0x75 @ 1
iscsi: registered transport (be2iscsi)
In beiscsi_module_init, tt=b2bf7600
initcall beiscsi_module_init+0x0/0x75 returned 0 after 13100 usecs
calling esas2r_init+0x0/0x287 @ 1
esas2r: driver will not be loaded because no ATTO esas2r devices were found
initcall esas2r_init+0x0/0x287 returned -1 after 13052 usecs
calling pmcraid_init+0x0/0x126 @ 1
initcall pmcraid_init+0x0/0x126 returned 0 after 87 usecs
calling init+0x0/0xc4 @ 1
initcall init+0x0/0xc4 returned 0 after 411 usecs
calling pvscsi_init+0x0/0x35 @ 1
VMware PVSCSI driver - version 1.0.2.0-k
initcall pvscsi_init+0x0/0x35 returned 0 after 7164 usecs
calling init_sd+0x0/0x14b @ 1
initcall init_sd+0x0/0x14b returned 0 after 83 usecs
calling init_sg+0x0/0xaf @ 1
initcall init_sg+0x0/0xaf returned 0 after 40 usecs
calling init_ch_module+0x0/0xab @ 1
SCSI Media Changer driver v0.25
initcall init_ch_module+0x0/0xab returned 0 after 5817 usecs
calling osd_uld_init+0x0/0xbe @ 1
osd: LOADED open-osd 0.2.1
initcall osd_uld_init+0x0/0xbe returned 0 after 4758 usecs
calling ahci_pci_driver_init+0x0/0x16 @ 1
initcall ahci_pci_driver_init+0x0/0x16 returned 0 after 54 usecs
calling ahci_driver_init+0x0/0x11 @ 1
initcall ahci_driver_init+0x0/0x11 returned 0 after 27 usecs
calling sil24_pci_driver_init+0x0/0x16 @ 1
initcall sil24_pci_driver_init+0x0/0x16 returned 0 after 33 usecs
calling ahci_highbank_driver_init+0x0/0x11 @ 1
initcall ahci_highbank_driver_init+0x0/0x11 returned 0 after 39 usecs
calling imx_ahci_driver_init+0x0/0x11 @ 1
initcall imx_ahci_driver_init+0x0/0x11 returned 0 after 24 usecs
calling qs_ata_pci_driver_init+0x0/0x16 @ 1
initcall qs_ata_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling piix_init+0x0/0x24 @ 1
initcall piix_init+0x0/0x24 returned 0 after 40 usecs
calling mv_init+0x0/0x3c @ 1
initcall mv_init+0x0/0x3c returned 0 after 66 usecs
calling nv_pci_driver_init+0x0/0x16 @ 1
sata_nv 0000:00:07.0: version 3.5
sata_nv 0000:00:07.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 11
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 11
sata_nv 0000:00:08.0: setting latency timer to 64
calling 2_async_port_probe+0x0/0x49 @ 6
calling 3_async_port_probe+0x0/0x49 @ 91
async_waiting @ 91
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 5
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 5
initcall nv_pci_driver_init+0x0/0x16 returned 0 after 97585 usecs
calling pdc_ata_pci_driver_init+0x0/0x16 @ 1
initcall pdc_ata_pci_driver_init+0x0/0x16 returned 0 after 41 usecs
calling sis_pci_driver_init+0x0/0x16 @ 1
initcall sis_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling k2_sata_pci_driver_init+0x0/0x16 @ 1
initcall k2_sata_pci_driver_init+0x0/0x16 returned 0 after 32 usecs
calling uli_pci_driver_init+0x0/0x16 @ 1
initcall uli_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling svia_pci_driver_init+0x0/0x16 @ 1
initcall svia_pci_driver_init+0x0/0x16 returned 0 after 32 usecs
calling vsc_sata_pci_driver_init+0x0/0x16 @ 1
initcall vsc_sata_pci_driver_init+0x0/0x16 returned 0 after 38 usecs
calling ali_init+0x0/0x40 @ 1
initcall ali_init+0x0/0x40 returned 0 after 36 usecs
calling amd_pci_driver_init+0x0/0x16 @ 1
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
initcall amd_pci_driver_init+0x0/0x16 returned 0 after 44162 usecs
calling atp867x_driver_init+0x0/0x16 @ 1
initcall atp867x_driver_init+0x0/0x16 returned 0 after 40 usecs
calling cmd64x_pci_driver_init+0x0/0x16 @ 1
initcall cmd64x_pci_driver_init+0x0/0x16 returned 0 after 32 usecs
calling cs5535_pci_driver_init+0x0/0x16 @ 1
initcall cs5535_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling cs5536_pci_driver_init+0x0/0x16 @ 1
initcall cs5536_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling efar_pci_driver_init+0x0/0x16 @ 1
initcall efar_pci_driver_init+0x0/0x16 returned 0 after 33 usecs
calling hpt36x_pci_driver_init+0x0/0x16 @ 1
initcall hpt36x_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling hpt37x_pci_driver_init+0x0/0x16 @ 1
initcall hpt37x_pci_driver_init+0x0/0x16 returned 0 after 39 usecs
calling hpt3x2n_pci_driver_init+0x0/0x16 @ 1
initcall hpt3x2n_pci_driver_init+0x0/0x16 returned 0 after 32 usecs
calling it821x_pci_driver_init+0x0/0x16 @ 1
initcall it821x_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling jmicron_pci_driver_init+0x0/0x16 @ 1
initcall jmicron_pci_driver_init+0x0/0x16 returned 0 after 39 usecs
calling marvell_pci_driver_init+0x0/0x16 @ 1
initcall marvell_pci_driver_init+0x0/0x16 returned 0 after 32 usecs
calling ninja32_pci_driver_init+0x0/0x16 @ 1
initcall ninja32_pci_driver_init+0x0/0x16 returned 0 after 32 usecs
calling oldpiix_pci_driver_init+0x0/0x16 @ 1
initcall oldpiix_pci_driver_init+0x0/0x16 returned 0 after 39 usecs
calling optidma_pci_driver_init+0x0/0x16 @ 1
initcall optidma_pci_driver_init+0x0/0x16 returned 0 after 40 usecs
calling pdc2027x_pci_driver_init+0x0/0x16 @ 1
initcall pdc2027x_pci_driver_init+0x0/0x16 returned 0 after 32 usecs
calling pdc202xx_pci_driver_init+0x0/0x16 @ 1
initcall pdc202xx_pci_driver_init+0x0/0x16 returned 0 after 33 usecs
calling radisys_pci_driver_init+0x0/0x16 @ 1
initcall radisys_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling rdc_pci_driver_init+0x0/0x16 @ 1
initcall rdc_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling sc1200_pci_driver_init+0x0/0x16 @ 1
initcall sc1200_pci_driver_init+0x0/0x16 returned 0 after 39 usecs
calling sch_pci_driver_init+0x0/0x16 @ 1
initcall sch_pci_driver_init+0x0/0x16 returned 0 after 38 usecs
calling serverworks_pci_driver_init+0x0/0x16 @ 1
initcall serverworks_pci_driver_init+0x0/0x16 returned 0 after 32 usecs
calling sis_pci_driver_init+0x0/0x16 @ 1
initcall sis_pci_driver_init+0x0/0x16 returned 0 after 40 usecs
calling ata_tosh_pci_driver_init+0x0/0x16 @ 1
initcall ata_tosh_pci_driver_init+0x0/0x16 returned 0 after 32 usecs
calling triflex_pci_driver_init+0x0/0x16 @ 1
initcall triflex_pci_driver_init+0x0/0x16 returned 0 after 32 usecs
calling via_pci_driver_init+0x0/0x16 @ 1
initcall via_pci_driver_init+0x0/0x16 returned 0 after 33 usecs
calling cmd640_pci_driver_init+0x0/0x16 @ 1
initcall cmd640_pci_driver_init+0x0/0x16 returned 0 after 38 usecs
calling isapnp_init+0x0/0xf @ 1
initcall isapnp_init+0x0/0xf returned 0 after 29 usecs
calling mpiix_pci_driver_init+0x0/0x16 @ 1
initcall mpiix_pci_driver_init+0x0/0x16 returned 0 after 31 usecs
calling ns87410_pci_driver_init+0x0/0x16 @ 1
initcall ns87410_pci_driver_init+0x0/0x16 returned 0 after 32 usecs
calling opti_pci_driver_init+0x0/0x16 @ 1
initcall opti_pci_driver_init+0x0/0x16 returned 0 after 33 usecs
calling pata_platform_driver_init+0x0/0x11 @ 1
initcall pata_platform_driver_init+0x0/0x11 returned 0 after 34 usecs
calling pata_of_platform_driver_init+0x0/0x11 @ 1
initcall pata_of_platform_driver_init+0x0/0x11 returned 0 after 25 usecs
calling rz1000_pci_driver_init+0x0/0x16 @ 1
initcall rz1000_pci_driver_init+0x0/0x16 returned 0 after 39 usecs
calling ata_generic_pci_driver_init+0x0/0x16 @ 1
initcall ata_generic_pci_driver_init+0x0/0x16 returned 0 after 34 usecs
calling legacy_init+0x0/0x874 @ 1
initcall legacy_init+0x0/0x874 returned -19 after 14 usecs
calling target_core_init_configfs+0x0/0x394 @ 1
calling 4_async_port_probe+0x0/0x49 @ 93
calling 5_async_port_probe+0x0/0x49 @ 109
async_waiting @ 109
calling 6_async_port_probe+0x0/0x49 @ 112
calling 7_async_port_probe+0x0/0x49 @ 113
async_waiting @ 113
Switched to clocksource pit
Rounding down aligned max_sectors from 4294967295 to 4294967288
initcall target_core_init_configfs+0x0/0x394 returned 0 after 39537 usecs
calling iblock_module_init+0x0/0xf @ 1
initcall iblock_module_init+0x0/0xf returned 0 after 4 usecs
calling fileio_module_init+0x0/0xf @ 1
initcall fileio_module_init+0x0/0xf returned 0 after 4 usecs
calling tcm_loop_fabric_init+0x0/0x38f @ 1
initcall tcm_loop_fabric_init+0x0/0x38f returned 0 after 132 usecs
calling iscsi_target_init_module+0x0/0x21e @ 1
initcall iscsi_target_init_module+0x0/0x21e returned 0 after 2380 usecs
calling hsc_init+0x0/0x66 @ 1
HSI/SSI char device loaded
initcall hsc_init+0x0/0x66 returned 0 after 1828 usecs
calling bonding_init+0x0/0x97 @ 1
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
initcall bonding_init+0x0/0x97 returned 0 after 1577 usecs
calling eql_init_module+0x0/0x6a @ 1
eql: Equalizer2002: Simon Janes (simon@xxxxxxx) and David S. Miller (davem@xxxxxxxxxx)
initcall eql_init_module+0x0/0x6a returned 0 after 1500 usecs
calling macvlan_init_module+0x0/0x31 @ 1
initcall macvlan_init_module+0x0/0x31 returned 0 after 4 usecs
calling macvtap_init+0x0/0xc7 @ 1
initcall macvtap_init+0x0/0xc7 returned 0 after 33 usecs
calling net_olddevs_init+0x0/0x50 @ 1
LocalTalk card not found; 220 = ff, 240 = ff.
initcall net_olddevs_init+0x0/0x50 returned 0 after 1451 usecs
calling cicada_init+0x0/0x14 @ 1
initcall cicada_init+0x0/0x14 returned 0 after 49 usecs
calling qs6612_init+0x0/0xf @ 1
initcall qs6612_init+0x0/0xf returned 0 after 24 usecs
calling smsc_init+0x0/0x14 @ 1
initcall smsc_init+0x0/0x14 returned 0 after 119 usecs
calling broadcom_init+0x0/0x14 @ 1
initcall broadcom_init+0x0/0x14 returned 0 after 253 usecs
calling bcm87xx_init+0x0/0x14 @ 1
initcall bcm87xx_init+0x0/0x14 returned 0 after 46 usecs
calling icplus_init+0x0/0x14 @ 1
initcall icplus_init+0x0/0x14 returned 0 after 152 usecs
calling et1011c_init+0x0/0xf @ 1
initcall et1011c_init+0x0/0xf returned 0 after 23 usecs
calling ns_init+0x0/0xf @ 1
initcall ns_init+0x0/0xf returned 0 after 24 usecs
calling ste10Xp_init+0x0/0x14 @ 1
initcall ste10Xp_init+0x0/0x14 returned 0 after 53 usecs
calling ksphy_init+0x0/0x14 @ 1
initcall ksphy_init+0x0/0x14 returned 0 after 261 usecs
calling atheros_init+0x0/0x14 @ 1
initcall atheros_init+0x0/0x14 returned 0 after 72 usecs
calling mdio_mux_gpio_driver_init+0x0/0x11 @ 1
initcall mdio_mux_gpio_driver_init+0x0/0x11 returned 0 after 40 usecs
calling mdio_mux_mmioreg_driver_init+0x0/0x11 @ 1
initcall mdio_mux_mmioreg_driver_init+0x0/0x11 returned 0 after 29 usecs
calling team_module_init+0x0/0x80 @ 1
initcall team_module_init+0x0/0x80 returned 0 after 54 usecs
calling bc_init_module+0x0/0xf @ 1
initcall bc_init_module+0x0/0xf returned 0 after 22 usecs
calling rr_init_module+0x0/0xf @ 1
initcall rr_init_module+0x0/0xf returned 0 after 4 usecs
calling rnd_init_module+0x0/0xf @ 1
initcall rnd_init_module+0x0/0xf returned 0 after 4 usecs
calling ab_init_module+0x0/0xf @ 1
initcall ab_init_module+0x0/0xf returned 0 after 4 usecs
calling lb_init_module+0x0/0xf @ 1
initcall lb_init_module+0x0/0xf returned 0 after 4 usecs
calling virtio_net_driver_init+0x0/0xf @ 1
initcall virtio_net_driver_init+0x0/0xf returned 0 after 27 usecs
calling nlmon_register+0x0/0xf @ 1
initcall nlmon_register+0x0/0xf returned 0 after 4 usecs
calling ipddp_init_module+0x0/0xed @ 1
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@xxxxxxxxxxxxxxxxx>
initcall ipddp_init_module+0x0/0xed returned 0 after 3465 usecs
calling can_dev_init+0x0/0x2c @ 1
CAN device driver interface
initcall can_dev_init+0x0/0x2c returned 0 after 1019 usecs
calling esd_usb2_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver esd_usb2
initcall esd_usb2_driver_init+0x0/0x16 returned 0 after 839 usecs
calling kvaser_usb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver kvaser_usb
initcall kvaser_usb_driver_init+0x0/0x16 returned 0 after 1178 usecs
calling usb_8dev_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usb_8dev
initcall usb_8dev_driver_init+0x0/0x16 returned 0 after 1813 usecs
calling softing_driver_init+0x0/0x11 @ 1
initcall softing_driver_init+0x0/0x11 returned 0 after 29 usecs
calling sja1000_init+0x0/0x1e @ 1
sja1000 CAN netdevice driver
initcall sja1000_init+0x0/0x1e returned 0 after 1189 usecs
calling sja1000_isa_init+0x0/0x14f @ 1
sja1000_isa: insufficient parameters supplied
initcall sja1000_isa_init+0x0/0x14f returned -22 after 1137 usecs
calling sp_driver_init+0x0/0x11 @ 1
initcall sp_driver_init+0x0/0x11 returned 0 after 30 usecs
calling ems_pcmcia_driver_init+0x0/0xf @ 1
initcall ems_pcmcia_driver_init+0x0/0xf returned 0 after 36 usecs
calling ems_pci_driver_init+0x0/0x16 @ 1
initcall ems_pci_driver_init+0x0/0x16 returned 0 after 53 usecs
calling pcan_driver_init+0x0/0xf @ 1
initcall pcan_driver_init+0x0/0xf returned 0 after 26 usecs
calling peak_pci_driver_init+0x0/0x16 @ 1
initcall peak_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling plx_pci_driver_init+0x0/0x16 @ 1
initcall plx_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling tscan1_init+0x0/0x14 @ 1
initcall tscan1_init+0x0/0x14 returned 0 after 263 usecs
calling cc770_init+0x0/0x2b @ 1
cc770: CAN netdevice driver
initcall cc770_init+0x0/0x2b returned 0 after 1033 usecs
calling cc770_isa_init+0x0/0x130 @ 1
cc770_isa: insufficient parameters supplied
initcall cc770_isa_init+0x0/0x130 returned -22 after 798 usecs
calling cc770_platform_driver_init+0x0/0x11 @ 1
initcall cc770_platform_driver_init+0x0/0x11 returned 0 after 45 usecs
calling pch_can_pci_driver_init+0x0/0x16 @ 1
initcall pch_can_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling grcan_driver_init+0x0/0x11 @ 1
initcall grcan_driver_init+0x0/0x11 returned 0 after 29 usecs
calling tc589_driver_init+0x0/0xf @ 1
initcall tc589_driver_init+0x0/0xf returned 0 after 27 usecs
calling vortex_init+0x0/0x9f @ 1
initcall vortex_init+0x0/0x9f returned 0 after 54 usecs
calling typhoon_init+0x0/0x16 @ 1
initcall typhoon_init+0x0/0x16 returned 0 after 36 usecs
calling ne_init+0x0/0x21 @ 1
initcall ne_init+0x0/0x21 returned -19 after 361 usecs
calling NS8390p_init_module+0x0/0x7 @ 1
initcall NS8390p_init_module+0x0/0x7 returned 0 after 4 usecs
calling ne2k_pci_init+0x0/0x16 @ 1
initcall ne2k_pci_init+0x0/0x16 returned 0 after 37 usecs
calling axnet_cs_driver_init+0x0/0xf @ 1
initcall axnet_cs_driver_init+0x0/0xf returned 0 after 31 usecs
calling pcnet_driver_init+0x0/0xf @ 1
initcall pcnet_driver_init+0x0/0xf returned 0 after 61 usecs
calling amd8111e_driver_init+0x0/0x16 @ 1
initcall amd8111e_driver_init+0x0/0x16 returned 0 after 36 usecs
calling nmclan_cs_driver_init+0x0/0xf @ 1
initcall nmclan_cs_driver_init+0x0/0xf returned 0 after 27 usecs
calling pcnet32_init_module+0x0/0x114 @ 1
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
initcall pcnet32_init_module+0x0/0x114 returned 0 after 1118 usecs
calling b44_init+0x0/0x3f @ 1
initcall b44_init+0x0/0x3f returned 0 after 57 usecs
calling bnx2_pci_driver_init+0x0/0x16 @ 1
initcall bnx2_pci_driver_init+0x0/0x16 returned 0 after 37 usecs
calling cnic_init+0x0/0x8b @ 1
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013)
initcall cnic_init+0x0/0x8b returned 0 after 1371 usecs
calling tg3_driver_init+0x0/0x16 @ 1
initcall tg3_driver_init+0x0/0x16 returned 0 after 54 usecs
calling cxgb_pci_driver_init+0x0/0x16 @ 1
initcall cxgb_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling cxgb4_init_module+0x0/0xa9 @ 1
initcall cxgb4_init_module+0x0/0xa9 returned 0 after 136 usecs
calling dnet_driver_init+0x0/0x11 @ 1
initcall dnet_driver_init+0x0/0x11 returned 0 after 31 usecs
calling dmfe_init_module+0x0/0xea @ 1
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
initcall dmfe_init_module+0x0/0xea returned 0 after 1758 usecs
calling w840_init+0x0/0x23 @ 1
v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@xxxxxxxxx>
http://www.scyld.com/network/drivers.html
v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@xxxxxxxxx>
http://www.scyld.com/network/drivers.html
initcall w840_init+0x0/0x23 returned 0 after 1263 usecs
calling de_init+0x0/0x16 @ 1
initcall de_init+0x0/0x16 returned 0 after 36 usecs
calling tulip_init+0x0/0x2a @ 1
initcall tulip_init+0x0/0x2a returned 0 after 45 usecs
calling de4x5_module_init+0x0/0x16 @ 1
initcall de4x5_module_init+0x0/0x16 returned 0 after 36 usecs
calling uli526x_init_module+0x0/0x9e @ 1
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
initcall uli526x_init_module+0x0/0x9e returned 0 after 1119 usecs
calling s2io_starter+0x0/0x16 @ 1
initcall s2io_starter+0x0/0x16 returned 0 after 36 usecs
calling jme_init_module+0x0/0x2d @ 1
jme: JMicron JMC2XX ethernet driver version 1.0.8
initcall jme_init_module+0x0/0x2d returned 0 after 870 usecs
calling mlx4_init+0x0/0x12e @ 1
initcall mlx4_init+0x0/0x12e returned 0 after 99 usecs
calling mlx4_en_init+0x0/0xf @ 1
initcall mlx4_en_init+0x0/0xf returned 0 after 16 usecs
calling init+0x0/0x5d @ 1
initcall init+0x0/0x5d returned 0 after 83 usecs
calling ks8851_platform_driver_init+0x0/0x11 @ 1
initcall ks8851_platform_driver_init+0x0/0x11 returned 0 after 36 usecs
calling pci_device_driver_init+0x0/0x16 @ 1
initcall pci_device_driver_init+0x0/0x16 returned 0 after 38 usecs
calling fealnx_init+0x0/0x16 @ 1
initcall fealnx_init+0x0/0x16 returned 0 after 36 usecs
calling natsemi_init_mod+0x0/0x16 @ 1
initcall natsemi_init_mod+0x0/0x16 returned 0 after 36 usecs
calling forcedeth_pci_driver_init+0x0/0x16 @ 1
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
forcedeth 0000:00:0a.0: setting latency timer to 64
ata5.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
ata5.00: 488397168 sectors, multi 1: LBA48
ata5: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
ata5.00: configured for UDMA/100
async_waiting @ 112
ata1: SATA link down (SStatus 0 SControl 300)
async_waiting @ 6
async_continuing @ 6 after 4 usec
initcall 2_async_port_probe+0x0/0x49 returned 0 after 1220598 usecs
async_continuing @ 91 after 1210867 usec
ata3: SATA link down (SStatus 0 SControl 300)
async_waiting @ 93
ata2: SATA link down (SStatus 0 SControl 300)
async_waiting @ 91
async_continuing @ 91 after 4 usec
initcall 3_async_port_probe+0x0/0x49 returned 0 after 1514369 usecs
async_continuing @ 93 after 268746 usec
initcall 4_async_port_probe+0x0/0x49 returned 0 after 591892 usecs
async_continuing @ 109 after 581639 usec
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
initcall forcedeth_pci_driver_init+0x0/0x16 returned 0 after 514388 usecs
calling ethoc_driver_init+0x0/0x11 @ 1
initcall ethoc_driver_init+0x0/0x11 returned 0 after 42 usecs
calling yellowfin_init+0x0/0x16 @ 1
initcall yellowfin_init+0x0/0x16 returned 0 after 45 usecs
calling sh_eth_driver_init+0x0/0x11 @ 1
initcall sh_eth_driver_init+0x0/0x11 returned 0 after 30 usecs
calling epic_init+0x0/0x16 @ 1
initcall epic_init+0x0/0x16 returned 0 after 44 usecs
calling smsc9420_init_module+0x0/0x36 @ 1
initcall smsc9420_init_module+0x0/0x36 returned 0 after 36 usecs
calling gem_driver_init+0x0/0x16 @ 1
initcall gem_driver_init+0x0/0x16 returned 0 after 36 usecs
calling cas_init+0x0/0x36 @ 1
initcall cas_init+0x0/0x36 returned 0 after 37 usecs
calling niu_init+0x0/0x36 @ 1
initcall niu_init+0x0/0x36 returned 0 after 45 usecs
calling velocity_init_module+0x0/0x48 @ 1
initcall velocity_init_module+0x0/0x48 returned 0 after 62 usecs
calling xirc2ps_cs_driver_init+0x0/0xf @ 1
initcall xirc2ps_cs_driver_init+0x0/0xf returned 0 after 39 usecs
calling skfddi_pci_driver_init+0x0/0x16 @ 1
initcall skfddi_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling dmascc_init+0x0/0x89c @ 1
dmascc: autoprobing (dangerous)
dmascc: no adapters found
initcall dmascc_init+0x0/0x89c returned -5 after 52931 usecs
calling scc_init_driver+0x0/0xa5 @ 1
AX.25: Z8530 SCC driver version 3.0.dl1bke
initcall scc_init_driver+0x0/0xa5 returned 0 after 1870 usecs
calling mkiss_init_driver+0x0/0x3f @ 1
mkiss: AX.25 Multikiss, Hans Albas PE1AYX
initcall mkiss_init_driver+0x0/0x3f returned 0 after 461 usecs
calling sixpack_init_driver+0x0/0x3f @ 1
AX.25: 6pack driver, Revision: 0.3.0
initcall sixpack_init_driver+0x0/0x3f returned 0 after 1567 usecs
calling yam_init_driver+0x0/0x120 @ 1
YAM driver version 0.8 by F1OAT/F6FBB
initcall yam_init_driver+0x0/0x120 returned 0 after 1737 usecs
calling bpq_init_driver+0x0/0x65 @ 1
AX.25: bpqether driver version 004
initcall bpq_init_driver+0x0/0x65 returned 0 after 252 usecs
calling init_baycomserfdx+0x0/0x100 @ 1
baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_ser_fdx: version 0.10
baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_ser_fdx: version 0.10
initcall init_baycomserfdx+0x0/0x100 returned 0 after 2460 usecs
calling hdlcdrv_init_driver+0x0/0x20 @ 1
hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
hdlcdrv: version 0.8
initcall hdlcdrv_init_driver+0x0/0x20 returned 0 after 1618 usecs
calling init_baycomserhdx+0x0/0xf3 @ 1
baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_ser_hdx: version 0.10
baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_ser_hdx: version 0.10
initcall init_baycomserhdx+0x0/0xf3 returned 0 after 1408 usecs
calling init_baycompar+0x0/0xe5 @ 1
baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_par: version 0.9
baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_par: version 0.9
initcall init_baycompar+0x0/0xe5 returned 0 after 2824 usecs
calling init_baycomepp+0x0/0x111 @ 1
baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_epp: version 0.7
baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_epp: version 0.7
initcall init_baycomepp+0x0/0x111 returned 0 after 1838 usecs
calling nsc_ircc_init+0x0/0x1d8 @ 1
initcall nsc_ircc_init+0x0/0x1d8 returned -19 after 135 usecs
calling donauboe_init+0x0/0x16 @ 1
initcall donauboe_init+0x0/0x16 returned 0 after 52 usecs
calling smsc_ircc_init+0x0/0x4f9 @ 1
initcall smsc_ircc_init+0x0/0x4f9 returned -19 after 162 usecs
calling vlsi_mod_init+0x0/0x110 @ 1
initcall vlsi_mod_init+0x0/0x110 returned 0 after 53 usecs
calling via_ircc_init+0x0/0x1c @ 1
initcall via_ircc_init+0x0/0x1c returned 0 after 37 usecs
calling mcs_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver mcs7780
initcall mcs_driver_init+0x0/0x16 returned 0 after 671 usecs
calling irtty_sir_init+0x0/0x3c @ 1
initcall irtty_sir_init+0x0/0x3c returned 0 after 4 usecs
calling sir_wq_init+0x0/0x49 @ 1
initcall sir_wq_init+0x0/0x49 returned 0 after 94 usecs
calling irda_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver kingsun-sir
initcall irda_driver_init+0x0/0x16 returned 0 after 371 usecs
calling slip_init+0x0/0xa8 @ 1
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
initcall slip_init+0x0/0xa8 returned 0 after 2324 usecs
calling init_x25_asy+0x0/0x6c @ 1
x25_asy: X.25 async: version 0.00 ALPHA (dynamic channels, max=256)
initcall init_x25_asy+0x0/0x6c returned 0 after 964 usecs
calling lapbeth_init_driver+0x0/0x28 @ 1
LAPB Ethernet driver version 0.02
initcall lapbeth_init_driver+0x0/0x28 returned 0 after 1059 usecs
calling ipw2100_init+0x0/0x78 @ 1
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
initcall ipw2100_init+0x0/0x78 returned 0 after 2832 usecs
calling ipw_init+0x0/0x73 @ 1
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdmq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
initcall ipw_init+0x0/0x73 returned 0 after 1661 usecs
calling libipw_init+0x0/0x20 @ 1
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
initcall libipw_init+0x0/0x20 returned 0 after 1573 usecs
calling init_orinoco+0x0/0x1e @ 1
orinoco 0.15 (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Pavel Roskin <proski@xxxxxxx>, et al)
initcall init_orinoco+0x0/0x1e returned 0 after 981 usecs
calling orinoco_driver_init+0x0/0xf @ 1
initcall orinoco_driver_init+0x0/0xf returned 0 after 41 usecs
calling orinoco_plx_init+0x0/0x2d @ 1
orinoco_plx 0.15 (Pavel Roskin <proski@xxxxxxx>, David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>, Daniel Barlow <dan@xxxxxxxxxx>)
initcall orinoco_plx_init+0x0/0x2d returned 0 after 1052 usecs
calling orinoco_driver_init+0x0/0xf @ 1
initcall orinoco_driver_init+0x0/0xf returned 0 after 27 usecs
calling airo_driver_init+0x0/0xf @ 1
initcall airo_driver_init+0x0/0xf returned 0 after 26 usecs
calling airo_init_module+0x0/0x113 @ 1
airo(): Probing for PCI adapters
airo(): Finished probing for PCI adapters
initcall airo_init_module+0x0/0x113 returned 0 after 2328 usecs
calling prism54_module_init+0x0/0x35 @ 1
Loaded prism54 driver, version 1.2
initcall prism54_module_init+0x0/0x35 returned 0 after 1268 usecs
calling hostap_init+0x0/0x40 @ 1
initcall hostap_init+0x0/0x40 returned 0 after 15 usecs
calling hostap_driver_init+0x0/0xf @ 1
initcall hostap_driver_init+0x0/0xf returned 0 after 32 usecs
calling prism2_pci_driver_init+0x0/0x16 @ 1
initcall prism2_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling usb_init+0x0/0xf3 @ 1
zd1211rw usb_init()
usbcore: registered new interface driver zd1211rw
zd1211rw initialized
initcall usb_init+0x0/0xf3 returned 0 after 2291 usecs
calling rtl8180_driver_init+0x0/0x16 @ 1
initcall rtl8180_driver_init+0x0/0x16 returned 0 after 37 usecs
calling rtl_core_module_init+0x0/0x45 @ 1
initcall rtl_core_module_init+0x0/0x45 returned 0 after 18 usecs
calling rtl8192cu_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver rtl8192cu
initcall rtl8192cu_driver_init+0x0/0x16 returned 0 after 1009 usecs
calling rtl92se_driver_init+0x0/0x16 @ 1
initcall rtl92se_driver_init+0x0/0x16 returned 0 after 45 usecs
calling rtl8723ae_driver_init+0x0/0x16 @ 1
initcall rtl8723ae_driver_init+0x0/0x16 returned 0 after 36 usecs
calling rtl88ee_driver_init+0x0/0x16 @ 1
initcall rtl88ee_driver_init+0x0/0x16 returned 0 after 43 usecs
calling wl3501_driver_init+0x0/0xf @ 1
initcall wl3501_driver_init+0x0/0xf returned 0 after 28 usecs
calling lbtf_init_module+0x0/0xde @ 1
initcall lbtf_init_module+0x0/0xde returned 0 after 58 usecs
calling adm8211_driver_init+0x0/0x16 @ 1
initcall adm8211_driver_init+0x0/0x16 returned 0 after 84 usecs
calling mwl8k_driver_init+0x0/0x16 @ 1
initcall mwl8k_driver_init+0x0/0x16 returned 0 after 51 usecs
calling iwl_drv_init+0x0/0x7b @ 1
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
initcall iwl_drv_init+0x0/0x7b returned 0 after 2177 usecs
calling iwl_init+0x0/0x55 @ 1
initcall iwl_init+0x0/0x55 returned 0 after 20 usecs
calling iwl_mvm_init+0x0/0x55 @ 1
initcall iwl_mvm_init+0x0/0x55 returned 0 after 4 usecs
calling il4965_init+0x0/0x6b @ 1
iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
iwl4965: Copyright(c) 2003-2011 Intel Corporation
initcall il4965_init+0x0/0x6b returned 0 after 2136 usecs
calling il3945_init+0x0/0x6b @ 1
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2011 Intel Corporation
initcall il3945_init+0x0/0x6b returned 0 after 2468 usecs
calling rt2500pci_driver_init+0x0/0x16 @ 1
initcall rt2500pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling rt61pci_driver_init+0x0/0x16 @ 1
initcall rt61pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling rt2800pci_init+0x0/0x16 @ 1
initcall rt2800pci_init+0x0/0x16 returned 0 after 39 usecs
calling rt2800usb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver rt2800usb
initcall rt2800usb_driver_init+0x0/0x16 returned 0 after 1009 usecs
calling ath5k_pci_driver_init+0x0/0x16 @ 1
initcall ath5k_pci_driver_init+0x0/0x16 returned 0 after 44 usecs
calling ath9k_init+0x0/0x39 @ 1
initcall ath9k_init+0x0/0x39 returned 0 after 72 usecs
calling ath9k_init+0x0/0x7 @ 1
initcall ath9k_init+0x0/0x7 returned 0 after 4 usecs
calling ath9k_cmn_init+0x0/0x7 @ 1
initcall ath9k_cmn_init+0x0/0x7 returned 0 after 4 usecs
calling ath9k_htc_init+0x0/0x24 @ 1
usbcore: registered new interface driver ath9k_htc
initcall ath9k_htc_init+0x0/0x24 returned 0 after 1009 usecs
calling carl9170_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver carl9170
initcall carl9170_driver_init+0x0/0x16 returned 0 after 1816 usecs
calling ath6kl_sdio_init+0x0/0x2e @ 1
initcall ath6kl_sdio_init+0x0/0x2e returned 0 after 24 usecs
calling ath6kl_usb_init+0x0/0x36 @ 1
usbcore: registered new interface driver ath6kl_usb
initcall ath6kl_usb_init+0x0/0x36 returned 0 after 1178 usecs
calling wil6210_driver_init+0x0/0x16 @ 1
initcall wil6210_driver_init+0x0/0x16 returned 0 after 43 usecs
calling wl12xx_driver_init+0x0/0x11 @ 1
initcall wl12xx_driver_init+0x0/0x11 returned 0 after 29 usecs
calling brcmfmac_module_init+0x0/0x26 @ 1
initcall brcmfmac_module_init+0x0/0x26 returned 0 after 49 usecs
calling cw1200_sdio_init+0x0/0x105 @ 1
initcall cw1200_sdio_init+0x0/0x105 returned 0 after 23 usecs
calling vmxnet3_init_module+0x0/0x35 @ 1
VMware vmxnet3 virtual NIC driver - version 1.2.0.0-k-NAPI
initcall vmxnet3_init_module+0x0/0x35 returned 0 after 1420 usecs
calling catc_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver catc
initcall catc_driver_init+0x0/0x16 returned 0 after 1138 usecs
calling pegasus_init+0x0/0x13e @ 1
pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
initcall pegasus_init+0x0/0x13e returned 0 after 1795 usecs
calling rtl8150_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver rtl8150
initcall rtl8150_driver_init+0x0/0x16 returned 0 after 670 usecs
calling rtl8152_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver r8152
initcall rtl8152_driver_init+0x0/0x16 returned 0 after 1307 usecs
calling asix_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver asix
initcall asix_driver_init+0x0/0x16 returned 0 after 1139 usecs
calling ax88179_178a_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ax88179_178a
initcall ax88179_178a_driver_init+0x0/0x16 returned 0 after 540 usecs
calling cdc_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_ether
initcall cdc_driver_init+0x0/0x16 returned 0 after 1009 usecs
calling r815x_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver r815x
initcall r815x_driver_init+0x0/0x16 returned 0 after 330 usecs
calling eem_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_eem
initcall eem_driver_init+0x0/0x16 returned 0 after 671 usecs
calling dm9601_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver dm9601
initcall dm9601_driver_init+0x0/0x16 returned 0 after 501 usecs
calling smsc75xx_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver smsc75xx
initcall smsc75xx_driver_init+0x0/0x16 returned 0 after 1816 usecs
calling smsc95xx_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver smsc95xx
initcall smsc95xx_driver_init+0x0/0x16 returned 0 after 839 usecs
calling gl620a_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver gl620a
initcall gl620a_driver_init+0x0/0x16 returned 0 after 1478 usecs
calling net1080_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver net1080
initcall net1080_driver_init+0x0/0x16 returned 0 after 671 usecs
calling rndis_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver rndis_host
initcall rndis_driver_init+0x0/0x16 returned 0 after 201 usecs
calling cdc_subset_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_subset
initcall cdc_subset_driver_init+0x0/0x16 returned 0 after 1178 usecs
calling zaurus_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver zaurus
initcall zaurus_driver_init+0x0/0x16 returned 0 after 500 usecs
calling usbnet_init+0x0/0x26 @ 1
initcall usbnet_init+0x0/0x26 returned 0 after 11 usecs
calling int51x1_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver int51x1
initcall int51x1_driver_init+0x0/0x16 returned 0 after 1646 usecs
calling kalmia_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver kalmia
initcall kalmia_driver_init+0x0/0x16 returned 0 after 500 usecs
calling ipheth_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ipheth
initcall ipheth_driver_init+0x0/0x16 returned 0 after 500 usecs
calling cx82310_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cx82310_eth
initcall cx82310_driver_init+0x0/0x16 returned 0 after 1347 usecs
calling cdc_ncm_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_ncm
initcall cdc_ncm_driver_init+0x0/0x16 returned 0 after 670 usecs
calling qmi_wwan_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver qmi_wwan
initcall qmi_wwan_driver_init+0x0/0x16 returned 0 after 840 usecs
calling cdc_mbim_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_mbim
initcall cdc_mbim_driver_init+0x0/0x16 returned 0 after 838 usecs
calling zatm_init_module+0x0/0x16 @ 1
initcall zatm_init_module+0x0/0x16 returned 0 after 51 usecs
calling uPD98402_module_init+0x0/0x7 @ 1
initcall uPD98402_module_init+0x0/0x7 returned 0 after 4 usecs
calling nicstar_init+0x0/0x67 @ 1
initcall nicstar_init+0x0/0x67 returned 0 after 36 usecs
calling hrz_module_init+0x0/0xc6 @ 1
Madge ATM Horizon [Ultra] driver version 1.2.1
initcall hrz_module_init+0x0/0xc6 returned 0 after 1338 usecs
calling fore200e_module_init+0x0/0x23 @ 1
fore200e: FORE Systems 200E-series ATM driver - version 0.3e
initcall fore200e_module_init+0x0/0x23 returned 0 after 788 usecs
calling eni_init+0x0/0x16 @ 1
initcall eni_init+0x0/0x16 returned 0 after 36 usecs
calling idt77252_init+0x0/0x35 @ 1
idt77252_init: at b2d5a532
initcall idt77252_init+0x0/0x35 returned 0 after 1873 usecs
calling solos_pci_init+0x0/0x2d @ 1
Solos PCI Driver Version 1.04
initcall solos_pci_init+0x0/0x2d returned 0 after 1393 usecs
calling adummy_init+0x0/0xe6 @ 1
adummy: version 1.0
initcall adummy_init+0x0/0xe6 returned 0 after 749 usecs
calling he_driver_init+0x0/0x16 @ 1
initcall he_driver_init+0x0/0x16 returned 0 after 37 usecs
calling lynx_pci_driver_init+0x0/0x16 @ 1
initcall lynx_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling uio_init+0x0/0xd6 @ 1
initcall uio_init+0x0/0xd6 returned 0 after 32 usecs
calling uio_pdrv_genirq_init+0x0/0x11 @ 1
initcall uio_pdrv_genirq_init+0x0/0x11 returned 0 after 31 usecs
calling uio_dmem_genirq_init+0x0/0x11 @ 1
initcall uio_dmem_genirq_init+0x0/0x11 returned 0 after 42 usecs
calling sercos3_pci_driver_init+0x0/0x16 @ 1
initcall sercos3_pci_driver_init+0x0/0x16 returned 0 after 43 usecs
calling uio_pci_driver_init+0x0/0x16 @ 1
initcall uio_pci_driver_init+0x0/0x16 returned 0 after 36 usecs
calling mf624_pci_driver_init+0x0/0x16 @ 1
initcall mf624_pci_driver_init+0x0/0x16 returned 0 after 43 usecs
calling cdrom_init+0x0/0xc @ 1
initcall cdrom_init+0x0/0xc returned 0 after 27 usecs
calling nonstatic_sysfs_init+0x0/0xf @ 1
initcall nonstatic_sysfs_init+0x0/0xf returned 0 after 4 usecs
calling yenta_socket_init+0x0/0x16 @ 1
initcall yenta_socket_init+0x0/0x16 returned 0 after 39 usecs
calling pd6729_module_init+0x0/0x16 @ 1
initcall pd6729_module_init+0x0/0x16 returned 0 after 36 usecs
calling init_i82365+0x0/0x497 @ 1
Intel ISA PCIC probe: Intel ISA PCIC probe: not found.
not found.
initcall init_i82365+0x0/0x497 returned -19 after 1954 usecs
calling i82092aa_module_init+0x0/0x16 @ 1
initcall i82092aa_module_init+0x0/0x16 returned 0 after 37 usecs
calling init_tcic+0x0/0x6b1 @ 1
Databook TCIC-2 PCMCIA probe: Databook TCIC-2 PCMCIA probe: not found.
not found.
initcall init_tcic+0x0/0x6b1 returned -19 after 2282 usecs
calling mon_init+0x0/0xec @ 1
initcall mon_init+0x0/0xec returned 0 after 217 usecs
calling ehci_hcd_init+0x0/0xc4 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
initcall ehci_hcd_init+0x0/0xc4 returned 0 after 1397 usecs
calling ehci_pci_init+0x0/0x62 @ 1
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: setting latency timer to 64
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 32 is not supported
ehci-pci 0000:00:02.1: irq 11, io mem 0xfeb00000
ata4: SATA link down (SStatus 0 SControl 300)
async_waiting @ 109
async_continuing @ 109 after 4 usec
initcall 5_async_port_probe+0x0/0x49 returned 0 after 1146508 usecs
async_continuing @ 112 after 904807 usec
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
scsi 4:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
calling 8_sd_probe_async+0x0/0x1ba @ 91
sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
hub 1-0:1.0: USB hub found
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: Attached scsi generic sg0 type 0
hub 1-0:1.0: 10 ports detected
initcall 6_async_port_probe+0x0/0x49 returned 0 after 1149272 usecs
async_continuing @ 113 after 1139128 usec
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
initcall ehci_pci_init+0x0/0x62 returned 0 after 26604 usecs
calling ehci_platform_init+0x0/0x49 @ 1
ehci-platform: EHCI generic platform driver
initcall ehci_platform_init+0x0/0x49 returned 0 after 1813 usecs
calling oxu_driver_init+0x0/0x11 @ 1
initcall oxu_driver_init+0x0/0x11 returned 0 after 28 usecs
calling ohci_hcd_mod_init+0x0/0x84 @ 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
initcall ohci_hcd_mod_init+0x0/0x84 returned 0 after 734 usecs
calling ohci_platform_init+0x0/0x49 @ 1
ohci-platform: OHCI generic platform driver
initcall ohci_platform_init+0x0/0x49 returned 0 after 1807 usecs
calling uhci_hcd_init+0x0/0xbb @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0xbb returned 0 after 1132 usecs
calling sl811h_driver_init+0x0/0x11 @ 1
initcall sl811h_driver_init+0x0/0x11 returned 0 after 29 usecs
calling u132_hcd_init+0x0/0xaf @ 1
driver u132_hcd
initcall u132_hcd_init+0x0/0xaf returned 0 after 2012 usecs
calling r8a66597_driver_init+0x0/0x11 @ 1
initcall r8a66597_driver_init+0x0/0x11 returned 0 after 29 usecs
calling isp1760_init+0x0/0x5c @ 1
initcall isp1760_init+0x0/0x5c returned 0 after 162 usecs
calling ssb_hcd_init+0x0/0x11 @ 1
initcall ssb_hcd_init+0x0/0x11 returned 0 after 31 usecs
calling fusbh200_hcd_init+0x0/0xae @ 1
fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
initcall fusbh200_hcd_init+0x0/0xae returned 0 after 1469 usecs
calling fotg210_hcd_init+0x0/0xae @ 1
fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
4Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
initcall fotg210_hcd_init+0x0/0xae returned 0 after 2277 usecs
calling c67x00_driver_init+0x0/0x11 @ 1
initcall c67x00_driver_init+0x0/0x11 returned 0 after 29 usecs
calling acm_init+0x0/0xd8 @ 1
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
initcall acm_init+0x0/0xd8 returned 0 after 2002 usecs
calling usblp_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usblp
initcall usblp_driver_init+0x0/0x16 returned 0 after 333 usecs
calling wdm_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_wdm
initcall wdm_driver_init+0x0/0x16 returned 0 after 1646 usecs
calling usbtmc_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usbtmc
initcall usbtmc_driver_init+0x0/0x16 returned 0 after 1478 usecs
calling usb_storage_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usb-storage
initcall usb_storage_driver_init+0x0/0x16 returned 0 after 1346 usecs
calling alauda_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-alauda
initcall alauda_driver_init+0x0/0x16 returned 0 after 1178 usecs
calling datafab_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-datafab
initcall datafab_driver_init+0x0/0x16 returned 0 after 1348 usecs
calling ene_ub6250_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums_eneub6250
initcall ene_ub6250_driver_init+0x0/0x16 returned 0 after 709 usecs
calling freecom_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-freecom
initcall freecom_driver_init+0x0/0x16 returned 0 after 1347 usecs
calling isd200_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-isd200
initcall isd200_driver_init+0x0/0x16 returned 0 after 205 usecs
calling jumpshot_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-jumpshot
initcall jumpshot_driver_init+0x0/0x16 returned 0 after 539 usecs
calling realtek_cr_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-realtek
initcall realtek_cr_driver_init+0x0/0x16 returned 0 after 1348 usecs
calling usb_serial_init+0x0/0x17f @ 1
usbcore: registered new interface driver usbserial
initcall usb_serial_init+0x0/0x17f returned 0 after 1035 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver ark3116
usbserial: USB Serial support registered for ark3116
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2019 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver belkin_sa
usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
initcall usb_serial_module_init+0x0/0x19 returned 0 after 3737 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver ch341
usbserial: USB Serial support registered for ch341-uart
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1209 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver cp210x
usbserial: USB Serial support registered for cp210x
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1681 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver cyberjack
usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2382 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver digi_acceleport
usbserial: USB Serial support registered for Digi 2 port USB adapter
usbserial: USB Serial support registered for Digi 4 port USB adapter
initcall usb_serial_module_init+0x0/0x19 returned 0 after 3299 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver empeg
usbserial: USB Serial support registered for empeg
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2316 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver f81232
usbserial: USB Serial support registered for f81232
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1679 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1807 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver garmin_gps
usbserial: USB Serial support registered for Garmin GPS usb/tty
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1457 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver iuu_phoenix
usbserial: USB Serial support registered for iuu_phoenix
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2395 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver kl5kusb105
usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1666 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver mct_u232
usbserial: USB Serial support registered for MCT U232
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1379 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver metro_usb
usbserial: USB Serial support registered for Metrologic USB to Serial
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2304 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver mos7720
usbserial: USB Serial support registered for Moschip 2 port adapter
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1627 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver mos7840
usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1876 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver navman
usbserial: USB Serial support registered for navman
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1680 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver opticon
usbserial: USB Serial support registered for opticon
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2018 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver oti6858
usbserial: USB Serial support registered for oti6858
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2018 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1679 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver quatech2
usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1238 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver sierra
usbserial: USB Serial support registered for Sierra USB modem
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2397 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver usb_serial_simple
usbserial: USB Serial support registered for zio
usbserial: USB Serial support registered for funsoft
usbserial: USB Serial support registered for flashloader
usbserial: USB Serial support registered for vivopay
usbserial: USB Serial support registered for moto_modem
usbserial: USB Serial support registered for hp4x
usbserial: USB Serial support registered for suunto
usbserial: USB Serial support registered for siemens_mpi
initcall usb_serial_module_init+0x0/0x19 returned 0 after 8761 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver ti_usb_3410_5052
usbserial: USB Serial support registered for TI USB 3410 1 port adapter
usbserial: USB Serial support registered for TI USB 5052 2 port adapter
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2533 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver visor
usbserial: USB Serial support registered for Handspring Visor / Palm OS
usbserial: USB Serial support registered for Sony Clie 5.0
usbserial: USB Serial support registered for Sony Clie 3.5
initcall usb_serial_module_init+0x0/0x19 returned 0 after 4736 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver wishbone_serial
usbserial: USB Serial support registered for wishbone_serial
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1796 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver whiteheat
usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
initcall usb_serial_module_init+0x0/0x19 returned 0 after 3078 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver keyspan_pda
usbserial: USB Serial support registered for Keyspan PDA
usbserial: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
initcall usb_serial_module_init+0x0/0x19 returned 0 after 2662 usecs
calling usb_serial_module_init+0x0/0x19 @ 1
usbcore: registered new interface driver xsens_mt
usbserial: USB Serial support registered for xsens_mt
initcall usb_serial_module_init+0x0/0x19 returned 0 after 1380 usecs
calling adu_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver adutux
initcall adu_driver_init+0x0/0x16 returned 0 after 1478 usecs
calling cypress_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cypress_cy7c63
initcall cypress_driver_init+0x0/0x16 returned 0 after 1856 usecs
calling cytherm_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver cytherm
initcall cytherm_driver_init+0x0/0x16 returned 0 after 1646 usecs
calling emi26_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver emi26 - firmware loader
initcall emi26_driver_init+0x0/0x16 returned 0 after 1427 usecs
calling emi62_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver emi62 - firmware loader
initcall emi62_driver_init+0x0/0x16 returned 0 after 1425 usecs
calling ftdi_elan_init+0x0/0x180 @ 1
driver ftdi-elan
ata6.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
ata6: nv_mode_filter: 0x1f39f&0x73ff->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
usbcore: registered new interface driver ftdi-elan
initcall ftdi_elan_init+0x0/0x180 returned 0 after 4651 usecs
calling idmouse_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver idmouse
initcall idmouse_driver_init+0x0/0x16 returned 0 after 1643 usecs
calling iowarrior_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver iowarrior
initcall iowarrior_driver_init+0x0/0x16 returned 0 after 1009 usecs
calling lcd_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usblcd
initcall lcd_driver_init+0x0/0x16 returned 0 after 1477 usecs
calling ld_usb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ldusb
initcall ld_usb_driver_init+0x0/0x16 returned 0 after 330 usecs
calling led_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usbled
initcall led_driver_init+0x0/0x16 returned 0 after 1478 usecs
calling tower_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver legousbtower
initcall tower_driver_init+0x0/0x16 returned 0 after 539 usecs
calling rio_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver rio500
initcall rio_driver_init+0x0/0x16 returned 0 after 1478 usecs
calling usbtest_init+0x0/0x54 @ 1
usbcore: registered new interface driver usbtest
initcall usbtest_init+0x0/0x54 returned 0 after 670 usecs
calling ehset_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usb_ehset_test
initcall ehset_driver_init+0x0/0x16 returned 0 after 879 usecs
calling tv_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver trancevibrator
initcall tv_driver_init+0x0/0x16 returned 0 after 878 usecs
calling uss720_init+0x0/0x52 @ 1
usbcore: registered new interface driver uss720
uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
uss720: NOTE: this is a special purpose driver to allow nonstandard
uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
uss720: If you just want to connect to a printer, use usblp instead
initcall uss720_init+0x0/0x52 returned 0 after 5118 usecs
calling sevseg_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usbsevseg
initcall sevseg_driver_init+0x0/0x16 returned 0 after 1009 usecs
calling usb3503_init+0x0/0x4a @ 1
initcall usb3503_init+0x0/0x4a returned 0 after 76 usecs
calling usb_sisusb_init+0x0/0x1b @ 1
usbcore: registered new interface driver sisusb
initcall usb_sisusb_init+0x0/0x1b returned 0 after 501 usecs
calling samsung_usb2phy_driver_init+0x0/0x11 @ 1
initcall samsung_usb2phy_driver_init+0x0/0x11 returned 0 after 29 usecs
calling samsung_usb3phy_driver_init+0x0/0x11 @ 1
initcall samsung_usb3phy_driver_init+0x0/0x11 returned 0 after 28 usecs
calling gpio_vbus_driver_init+0x0/0x11 @ 1
initcall gpio_vbus_driver_init+0x0/0x11 returned 0 after 27 usecs
calling rcar_usb_phy_driver_init+0x0/0x11 @ 1
initcall rcar_usb_phy_driver_init+0x0/0x11 returned 0 after 29 usecs
calling musb_init+0x0/0x1e @ 1
initcall musb_init+0x0/0x1e returned 0 after 27 usecs
calling tusb_driver_init+0x0/0x11 @ 1
initcall tusb_driver_init+0x0/0x11 returned 0 after 28 usecs
calling ci_hdrc_driver_init+0x0/0x11 @ 1
initcall ci_hdrc_driver_init+0x0/0x11 returned 0 after 35 usecs
calling ci_hdrc_msm_driver_init+0x0/0x11 @ 1
initcall ci_hdrc_msm_driver_init+0x0/0x11 returned 0 after 29 usecs
calling ci_hdrc_pci_driver_init+0x0/0x16 @ 1
initcall ci_hdrc_pci_driver_init+0x0/0x16 returned 0 after 58 usecs
calling ci_hdrc_imx_driver_init+0x0/0x11 @ 1
initcall ci_hdrc_imx_driver_init+0x0/0x11 returned 0 after 28 usecs
calling usbmisc_imx_driver_init+0x0/0x11 @ 1
initcall usbmisc_imx_driver_init+0x0/0x11 returned 0 after 28 usecs
calling renesas_usbhs_driver_init+0x0/0x11 @ 1
initcall renesas_usbhs_driver_init+0x0/0x11 returned 0 after 28 usecs
calling gadget_cfs_init+0x0/0x19 @ 1
initcall gadget_cfs_init+0x0/0x19 returned 0 after 25 usecs
calling init+0x0/0x2e8 @ 1
dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
dummy_hcd dummy_hcd.0: Dummy host controller
ata6.01: configured for UDMA/33
dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 2
async_waiting @ 113
async_continuing @ 113 after 4 usec
hub 2-0:1.0: USB hub found
scsi 5:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5
scsi 5:0:1:0: Attached scsi generic sg1 type 5
hub 2-0:1.0: 1 port detected
initcall 7_async_port_probe+0x0/0x49 returned 0 after 1455987 usecs
initcall init+0x0/0x2e8 returned 0 after 12075 usecs
calling net2272_init+0x0/0x3c @ 1
initcall net2272_init+0x0/0x3c returned 0 after 94 usecs
calling udc_pci_driver_init+0x0/0x16 @ 1
initcall udc_pci_driver_init+0x0/0x16 returned 0 after 39 usecs
calling udc_driver_init+0x0/0x11 @ 1
initcall udc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling r8a66597_driver_init+0x0/0x14 @ 1
initcall r8a66597_driver_init+0x0/0x14 returned -19 after 49 usecs
calling ncmmod_init+0x0/0xf @ 1
initcall ncmmod_init+0x0/0xf returned 0 after 18 usecs
calling init+0x0/0xf @ 1
udc dummy_udc.0: registering UDC driver [g_ncm]
using random self ethernet address
using random host ethernet address
g_ncm gadget: adding config #1 'CDC Ethernet (NCM)'/b2c40ce0
g_ncm gadget: adding 'cdc_network'/eb816f00 to config 'CDC Ethernet (NCM)'/b2c40ce0
usb0: HOST MAC aa:99:de:d4:76:38
usb0: MAC 2a:0a:99:90:0a:c2
g_ncm gadget: CDC Network: dual speed IN/ep1in-bulk OUT/ep2out-bulk NOTIFY/ep5in-int
g_ncm gadget: cfg 1/b2c40ce0 speeds: high full
g_ncm gadget: interface 0 = cdc_network/eb816f00
g_ncm gadget: interface 1 = cdc_network/eb816f00
g_ncm gadget: NCM Gadget
g_ncm gadget: g_ncm ready
dummy_udc dummy_udc.0: binding gadget driver 'g_ncm'
dummy_hcd dummy_hcd.0: port status 0x00010101 has changes
initcall init+0x0/0xf returned 0 after 15500 usecs
calling i8042_init+0x0/0x33e @ 1
i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
initcall i8042_init+0x0/0x33e returned 0 after 4027 usecs
calling parkbd_init+0x0/0x177 @ 1
parport0: cannot grant exclusive access for device parkbd
initcall parkbd_init+0x0/0x177 returned -19 after 241 usecs
calling serport_init+0x0/0x2c @ 1
initcall serport_init+0x0/0x2c returned 0 after 4 usecs
calling ct82c710_init+0x0/0x137 @ 1
initcall ct82c710_init+0x0/0x137 returned -19 after 13 usecs
calling pcips2_driver_init+0x0/0x16 @ 1
initcall pcips2_driver_init+0x0/0x16 returned 0 after 47 usecs
calling ps2mult_drv_init+0x0/0x16 @ 1
initcall ps2mult_drv_init+0x0/0x16 returned 0 after 29 usecs
calling altera_ps2_driver_init+0x0/0x11 @ 1
initcall altera_ps2_driver_init+0x0/0x11 returned 0 after 31 usecs
calling arc_ps2_driver_init+0x0/0x11 @ 1
initcall arc_ps2_driver_init+0x0/0x11 returned 0 after 31 usecs
calling apbps2_of_driver_init+0x0/0x11 @ 1
initcall apbps2_of_driver_init+0x0/0x11 returned 0 after 30 usecs
calling olpc_apsp_driver_init+0x0/0x11 @ 1
initcall olpc_apsp_driver_init+0x0/0x11 returned 0 after 44 usecs
calling fm801_gp_driver_init+0x0/0x16 @ 1
initcall fm801_gp_driver_init+0x0/0x16 returned 0 after 38 usecs
calling l4_init+0x0/0x27e @ 1
initcall l4_init+0x0/0x27e returned -19 after 15 usecs
calling ns558_init+0x0/0x2fe @ 1
initcall ns558_init+0x0/0x2fe returned 0 after 7856 usecs
calling mousedev_init+0x0/0x7c @ 1
mousedev: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x7c returned 0 after 1749 usecs
calling joydev_init+0x0/0xf @ 1
initcall joydev_init+0x0/0xf returned 0 after 4 usecs
calling evdev_init+0x0/0xf @ 1
initcall evdev_init+0x0/0xf returned 0 after 4 usecs
calling adp5588_driver_init+0x0/0x11 @ 1
initcall adp5588_driver_init+0x0/0x11 returned 0 after 32 usecs
calling adp5589_driver_init+0x0/0x11 @ 1
initcall adp5589_driver_init+0x0/0x11 returned 0 after 26 usecs
calling atkbd_init+0x0/0x16 @ 1
initcall atkbd_init+0x0/0x16 returned 0 after 29 usecs
calling cros_ec_keyb_driver_init+0x0/0x11 @ 1
initcall cros_ec_keyb_driver_init+0x0/0x11 returned 0 after 40 usecs
calling events_driver_init+0x0/0x11 @ 1
initcall events_driver_init+0x0/0x11 returned 0 after 29 usecs
calling gpio_keys_polled_driver_init+0x0/0x11 @ 1
initcall gpio_keys_polled_driver_init+0x0/0x11 returned 0 after 31 usecs
calling lm8323_i2c_driver_init+0x0/0x11 @ 1
initcall lm8323_i2c_driver_init+0x0/0x11 returned 0 after 26 usecs
calling lm8333_driver_init+0x0/0x11 @ 1
initcall lm8333_driver_init+0x0/0x11 returned 0 after 26 usecs
calling matrix_keypad_driver_init+0x0/0x11 @ 1
initcall matrix_keypad_driver_init+0x0/0x11 returned 0 after 30 usecs
calling max7359_i2c_driver_init+0x0/0x11 @ 1
initcall max7359_i2c_driver_init+0x0/0x11 returned 0 after 27 usecs
calling mcs_touchkey_driver_init+0x0/0x11 @ 1
initcall mcs_touchkey_driver_init+0x0/0x11 returned 0 after 26 usecs
calling mpr_touchkey_driver_init+0x0/0x11 @ 1
initcall mpr_touchkey_driver_init+0x0/0x11 returned 0 after 26 usecs
calling nkbd_drv_init+0x0/0x16 @ 1
initcall nkbd_drv_init+0x0/0x16 returned 0 after 36 usecs
calling opencores_kbd_device_driver_init+0x0/0x11 @ 1
initcall opencores_kbd_device_driver_init+0x0/0x11 returned 0 after 31 usecs
calling qt2160_driver_init+0x0/0x11 @ 1
initcall qt2160_driver_init+0x0/0x11 returned 0 after 26 usecs
calling skbd_drv_init+0x0/0x16 @ 1
initcall skbd_drv_init+0x0/0x16 returned 0 after 28 usecs
calling sunkbd_drv_init+0x0/0x16 @ 1
initcall sunkbd_drv_init+0x0/0x16 returned 0 after 27 usecs
calling tc3589x_keypad_driver_init+0x0/0x11 @ 1
initcall tc3589x_keypad_driver_init+0x0/0x11 returned 0 after 45 usecs
calling twl4030_kp_driver_init+0x0/0x11 @ 1
initcall twl4030_kp_driver_init+0x0/0x11 returned 0 after 31 usecs
calling xtkbd_drv_init+0x0/0x16 @ 1
initcall xtkbd_drv_init+0x0/0x16 returned 0 after 36 usecs
calling auo_pixcir_driver_init+0x0/0x11 @ 1
initcall auo_pixcir_driver_init+0x0/0x11 returned 0 after 27 usecs
calling cy8ctmg110_driver_init+0x0/0x11 @ 1
initcall cy8ctmg110_driver_init+0x0/0x11 returned 0 after 94 usecs
calling cyttsp_i2c_driver_init+0x0/0x11 @ 1
initcall cyttsp_i2c_driver_init+0x0/0x11 returned 0 after 49 usecs
calling da9034_touch_driver_init+0x0/0x11 @ 1
initcall da9034_touch_driver_init+0x0/0x11 returned 0 after 31 usecs
calling dynapro_drv_init+0x0/0x16 @ 1
initcall dynapro_drv_init+0x0/0x16 returned 0 after 27 usecs
calling hampshire_drv_init+0x0/0x16 @ 1
initcall hampshire_drv_init+0x0/0x16 returned 0 after 27 usecs
calling gunze_drv_init+0x0/0x16 @ 1
initcall gunze_drv_init+0x0/0x16 returned 0 after 27 usecs
calling eeti_ts_driver_init+0x0/0x11 @ 1
initcall eeti_ts_driver_init+0x0/0x11 returned 0 after 32 usecs
calling elo_drv_init+0x0/0x16 @ 1
initcall elo_drv_init+0x0/0x16 returned 0 after 27 usecs
calling egalax_ts_driver_init+0x0/0x11 @ 1
initcall egalax_ts_driver_init+0x0/0x11 returned 0 after 26 usecs
calling fujitsu_drv_init+0x0/0x16 @ 1
initcall fujitsu_drv_init+0x0/0x16 returned 0 after 27 usecs
calling max11801_ts_driver_init+0x0/0x11 @ 1
initcall max11801_ts_driver_init+0x0/0x11 returned 0 after 25 usecs
calling mcs5000_ts_driver_init+0x0/0x11 @ 1
initcall mcs5000_ts_driver_init+0x0/0x11 returned 0 after 25 usecs
calling mms114_driver_init+0x0/0x11 @ 1
initcall mms114_driver_init+0x0/0x11 returned 0 after 25 usecs
calling mtouch_drv_init+0x0/0x16 @ 1
initcall mtouch_drv_init+0x0/0x16 returned 0 after 27 usecs
calling mk712_init+0x0/0x1c1 @ 1
mk712: device not present
initcall mk712_init+0x0/0x1c1 returned -19 after 683 usecs
calling htcpen_isa_init+0x0/0xa @ 1
initcall htcpen_isa_init+0x0/0xa returned -19 after 4 usecs
calling usbtouch_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver usbtouchscreen
initcall usbtouch_driver_init+0x0/0x16 returned 0 after 879 usecs
calling ti_tsc_driver_init+0x0/0x11 @ 1
initcall ti_tsc_driver_init+0x0/0x11 returned 0 after 29 usecs
calling touchit213_drv_init+0x0/0x16 @ 1
initcall touchit213_drv_init+0x0/0x16 returned 0 after 39 usecs
calling tr_drv_init+0x0/0x16 @ 1
initcall tr_drv_init+0x0/0x16 returned 0 after 28 usecs
calling tw_drv_init+0x0/0x16 @ 1
initcall tw_drv_init+0x0/0x16 returned 0 after 27 usecs
calling tsc2007_driver_init+0x0/0x11 @ 1
initcall tsc2007_driver_init+0x0/0x11 returned 0 after 26 usecs
calling w8001_drv_init+0x0/0x16 @ 1
initcall w8001_drv_init+0x0/0x16 returned 0 after 34 usecs
calling wacom_i2c_driver_init+0x0/0x11 @ 1
initcall wacom_i2c_driver_init+0x0/0x11 returned 0 after 27 usecs
calling wm831x_ts_driver_init+0x0/0x11 @ 1
initcall wm831x_ts_driver_init+0x0/0x11 returned 0 after 31 usecs
calling tps6507x_ts_driver_init+0x0/0x11 @ 1
initcall tps6507x_ts_driver_init+0x0/0x11 returned 0 after 30 usecs
calling pm860x_onkey_driver_init+0x0/0x11 @ 1
initcall pm860x_onkey_driver_init+0x0/0x11 returned 0 after 31 usecs
calling bma150_driver_init+0x0/0x11 @ 1
initcall bma150_driver_init+0x0/0x11 returned 0 after 26 usecs
calling gp2a_i2c_driver_init+0x0/0x11 @ 1
initcall gp2a_i2c_driver_init+0x0/0x11 returned 0 after 25 usecs
calling gpio_tilt_polled_driver_init+0x0/0x11 @ 1
initcall gpio_tilt_polled_driver_init+0x0/0x11 returned 0 after 31 usecs
calling keyspan_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver keyspan_remote
initcall keyspan_driver_init+0x0/0x16 returned 0 after 879 usecs
calling mpu3050_i2c_driver_init+0x0/0x11 @ 1
initcall mpu3050_i2c_driver_init+0x0/0x11 returned 0 after 33 usecs
calling pcf50633_input_driver_init+0x0/0x11 @ 1
initcall pcf50633_input_driver_init+0x0/0x11 returned 0 after 30 usecs
calling pcf8574_kp_driver_init+0x0/0x11 @ 1
initcall pcf8574_kp_driver_init+0x0/0x11 returned 0 after 32 usecs
calling powermate_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver powermate
initcall powermate_driver_init+0x0/0x16 returned 0 after 1008 usecs
calling twl4030_pwrbutton_driver_init+0x0/0x14 @ 1
initcall twl4030_pwrbutton_driver_init+0x0/0x14 returned -19 after 49 usecs
calling twl4030_vibra_driver_init+0x0/0x11 @ 1
initcall twl4030_vibra_driver_init+0x0/0x11 returned 0 after 30 usecs
calling twl6040_vibra_driver_init+0x0/0x11 @ 1
initcall twl6040_vibra_driver_init+0x0/0x11 returned 0 after 31 usecs
calling uinput_init+0x0/0xf @ 1
gameport gameport0: NS558 PnP Gameport is pnp00:10/gameport0, io 0x201, speed 903kHz
dummy_hcd dummy_hcd.0: port status 0x00010101 has changes
initcall uinput_init+0x0/0xf returned 0 after 17685 usecs
calling wm831x_on_driver_init+0x0/0x11 @ 1
initcall wm831x_on_driver_init+0x0/0x11 returned 0 after 36 usecs
calling slidebar_init+0x0/0xab @ 1
ideapad_slidebar: DMI does not match
initcall slidebar_init+0x0/0xab returned -19 after 591 usecs
calling i2o_iop_init+0x0/0x45 @ 1
I2O subsystem v1.325
i2o: max drivers = 8
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
initcall i2o_iop_init+0x0/0x45 returned 0 after 3704 usecs
calling i2o_config_init+0x0/0x3f @ 1
I2O Configuration OSM v1.323
initcall i2o_config_init+0x0/0x3f returned 0 after 1217 usecs
calling i2o_bus_init+0x0/0x3e @ 1
I2O Bus Adapter OSM v1.317
initcall i2o_bus_init+0x0/0x3e returned 0 after 858 usecs
calling i2o_scsi_init+0x0/0x3e @ 1
I2O SCSI Peripheral OSM v1.316
initcall i2o_scsi_init+0x0/0x3e returned 0 after 1550 usecs
calling i2o_proc_init+0x0/0x169 @ 1
I2O ProcFS OSM v1.316
initcall i2o_proc_init+0x0/0x169 returned 0 after 1018 usecs
calling pm80x_rtc_driver_init+0x0/0x11 @ 1
initcall pm80x_rtc_driver_init+0x0/0x11 returned 0 after 35 usecs
calling bq32k_driver_init+0x0/0x11 @ 1
initcall bq32k_driver_init+0x0/0x11 returned 0 after 31 usecs
calling cmos_init+0x0/0x5e @ 1
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one day, 114 bytes nvram
initcall cmos_init+0x0/0x5e returned 0 after 2174 usecs
calling ds1286_platform_driver_init+0x0/0x11 @ 1
initcall ds1286_platform_driver_init+0x0/0x11 returned 0 after 31 usecs
calling ds1307_driver_init+0x0/0x11 @ 1
initcall ds1307_driver_init+0x0/0x11 returned 0 after 52 usecs
calling ds1374_driver_init+0x0/0x11 @ 1
initcall ds1374_driver_init+0x0/0x11 returned 0 after 26 usecs
calling ds1511_rtc_driver_init+0x0/0x11 @ 1
initcall ds1511_rtc_driver_init+0x0/0x11 returned 0 after 30 usecs
calling ds1672_driver_init+0x0/0x11 @ 1
initcall ds1672_driver_init+0x0/0x11 returned 0 after 26 usecs
calling ds1742_rtc_driver_init+0x0/0x11 @ 1
initcall ds1742_rtc_driver_init+0x0/0x11 returned 0 after 30 usecs
calling ds3232_driver_init+0x0/0x11 @ 1
initcall ds3232_driver_init+0x0/0x11 returned 0 after 33 usecs
calling em3027_driver_init+0x0/0x11 @ 1
initcall em3027_driver_init+0x0/0x11 returned 0 after 32 usecs
calling fm3130_driver_init+0x0/0x11 @ 1
initcall fm3130_driver_init+0x0/0x11 returned 0 after 25 usecs
calling hid_time_platform_driver_init+0x0/0x11 @ 1
initcall hid_time_platform_driver_init+0x0/0x11 returned 0 after 31 usecs
calling isl1208_driver_init+0x0/0x11 @ 1
initcall isl1208_driver_init+0x0/0x11 returned 0 after 27 usecs
calling isl12022_driver_init+0x0/0x11 @ 1
initcall isl12022_driver_init+0x0/0x11 returned 0 after 26 usecs
calling lp8788_rtc_driver_init+0x0/0x11 @ 1
initcall lp8788_rtc_driver_init+0x0/0x11 returned 0 after 30 usecs
calling m48t35_platform_driver_init+0x0/0x11 @ 1
initcall m48t35_platform_driver_init+0x0/0x11 returned 0 after 30 usecs
calling m48t86_rtc_platform_driver_init+0x0/0x11 @ 1
initcall m48t86_rtc_platform_driver_init+0x0/0x11 returned 0 after 30 usecs
calling max6900_driver_init+0x0/0x11 @ 1
initcall max6900_driver_init+0x0/0x11 returned 0 after 34 usecs
calling msm6242_rtc_driver_init+0x0/0x14 @ 1
initcall msm6242_rtc_driver_init+0x0/0x14 returned -19 after 62 usecs
calling pcf2127_driver_init+0x0/0x11 @ 1
initcall pcf2127_driver_init+0x0/0x11 returned 0 after 26 usecs
calling pcf8523_driver_init+0x0/0x11 @ 1
initcall pcf8523_driver_init+0x0/0x11 returned 0 after 27 usecs
calling pcf50633_rtc_driver_init+0x0/0x11 @ 1
initcall pcf50633_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling rs5c372_driver_init+0x0/0x11 @ 1
initcall rs5c372_driver_init+0x0/0x11 returned 0 after 27 usecs
calling rv3029c2_driver_init+0x0/0x11 @ 1
initcall rv3029c2_driver_init+0x0/0x11 returned 0 after 26 usecs
calling rx8581_driver_init+0x0/0x11 @ 1
initcall rx8581_driver_init+0x0/0x11 returned 0 after 26 usecs
calling snvs_rtc_driver_init+0x0/0x11 @ 1
initcall snvs_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling test_init+0x0/0xa2 @ 1
rtc-test rtc-test.0: rtc core: registered test as rtc1
rtc-test rtc-test.1: rtc core: registered test as rtc2
initcall test_init+0x0/0xa2 returned 0 after 1551 usecs
calling twl4030rtc_driver_init+0x0/0x11 @ 1
initcall twl4030rtc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling tps65910_rtc_driver_init+0x0/0x11 @ 1
initcall tps65910_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling rtc_device_driver_init+0x0/0x11 @ 1
initcall rtc_device_driver_init+0x0/0x11 returned 0 after 31 usecs
calling wm831x_rtc_driver_init+0x0/0x11 @ 1
initcall wm831x_rtc_driver_init+0x0/0x11 returned 0 after 37 usecs
calling x1205_driver_init+0x0/0x11 @ 1
initcall x1205_driver_init+0x0/0x11 returned 0 after 27 usecs
calling moxart_rtc_driver_init+0x0/0x11 @ 1
initcall moxart_rtc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling smbalert_driver_init+0x0/0x11 @ 1
initcall smbalert_driver_init+0x0/0x11 returned 0 after 27 usecs
calling i2c_dev_init+0x0/0xb8 @ 1
i2c /dev entries driver
initcall i2c_dev_init+0x0/0xb8 returned 0 after 1356 usecs
calling ali1535_driver_init+0x0/0x16 @ 1
initcall ali1535_driver_init+0x0/0x16 returned 0 after 47 usecs
calling amd756_driver_init+0x0/0x16 @ 1
initcall amd756_driver_init+0x0/0x16 returned 0 after 45 usecs
calling amd756_s4882_init+0x0/0x261 @ 1
initcall amd756_s4882_init+0x0/0x261 returned -19 after 4 usecs
calling i2c_i801_init+0x0/0x16 @ 1
initcall i2c_i801_init+0x0/0x16 returned 0 after 55 usecs
calling smbus_sch_driver_init+0x0/0x11 @ 1
initcall smbus_sch_driver_init+0x0/0x11 returned 0 after 38 usecs
calling ismt_driver_init+0x0/0x16 @ 1
initcall ismt_driver_init+0x0/0x16 returned 0 after 38 usecs
calling nforce2_driver_init+0x0/0x16 @ 1
sd 4:0:0:0: [sda] Attached SCSI disk
initcall 8_sd_probe_async+0x0/0x1ba returned 0 after 655420 usecs
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-0: nForce2 SMBus adapter at 0x4c00
i2c i2c-1: Transaction failed (0x10)!
g_ncm gadget: resume
dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
i2c i2c-1: Transaction failed (0x10)!
i2c i2c-1: nForce2 SMBus adapter at 0x4c40
initcall nforce2_driver_init+0x0/0x16 returned 0 after 54017 usecs
calling nforce2_s4985_init+0x0/0x26d @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-0: PCA9556 configuration failed
initcall nforce2_s4985_init+0x0/0x26d returned -5 after 4239 usecs
calling piix4_driver_init+0x0/0x16 @ 1
initcall piix4_driver_init+0x0/0x16 returned 0 after 54 usecs
calling i2c_sis5595_init+0x0/0x16 @ 1
initcall i2c_sis5595_init+0x0/0x16 returned 0 after 46 usecs
calling sis630_driver_init+0x0/0x16 @ 1
initcall sis630_driver_init+0x0/0x16 returned 0 after 39 usecs
calling vt586b_driver_init+0x0/0x16 @ 1
initcall vt586b_driver_init+0x0/0x16 returned 0 after 45 usecs
calling i2c_vt596_init+0x0/0x16 @ 1
initcall i2c_vt596_init+0x0/0x16 returned 0 after 40 usecs
calling dw_i2c_driver_init+0x0/0x16 @ 1
initcall dw_i2c_driver_init+0x0/0x16 returned 0 after 39 usecs
calling pch_pcidriver_init+0x0/0x16 @ 1
initcall pch_pcidriver_init+0x0/0x16 returned 0 after 38 usecs
calling kempld_i2c_driver_init+0x0/0x11 @ 1
initcall kempld_i2c_driver_init+0x0/0x11 returned 0 after 52 usecs
calling i2c_pca_pf_driver_init+0x0/0x11 @ 1
initcall i2c_pca_pf_driver_init+0x0/0x11 returned 0 after 31 usecs
calling simtec_i2c_driver_init+0x0/0x11 @ 1
initcall simtec_i2c_driver_init+0x0/0x11 returned 0 after 31 usecs
calling xiic_i2c_driver_init+0x0/0x11 @ 1
initcall xiic_i2c_driver_init+0x0/0x11 returned 0 after 31 usecs
calling diolan_u2c_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver i2c-diolan-u2c
initcall diolan_u2c_driver_init+0x0/0x16 returned 0 after 877 usecs
calling i2c_parport_init+0x0/0x4a @ 1
i2c-parport: adapter type unspecified
initcall i2c_parport_init+0x0/0x4a returned -19 after 759 usecs
calling i2c_parport_init+0x0/0x15d @ 1
i2c-parport-light: adapter type unspecified
initcall i2c_parport_init+0x0/0x15d returned -19 after 800 usecs
calling taos_init+0x0/0x16 @ 1
initcall taos_init+0x0/0x16 returned 0 after 33 usecs
calling i2c_tiny_usb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver i2c-tiny-usb
initcall i2c_tiny_usb_driver_init+0x0/0x16 returned 0 after 1529 usecs
calling scx200_acb_init+0x0/0x7b @ 1
scx200_acb: NatSemi SCx200 ACCESS.bus Driver
initcall scx200_acb_init+0x0/0x7b returned 0 after 1005 usecs
calling msp_driver_init+0x0/0x11 @ 1
initcall msp_driver_init+0x0/0x11 returned 0 after 59 usecs
calling tda7432_driver_init+0x0/0x11 @ 1
initcall tda7432_driver_init+0x0/0x11 returned 0 after 28 usecs
calling tda9840_driver_init+0x0/0x11 @ 1
initcall tda9840_driver_init+0x0/0x11 returned 0 after 28 usecs
calling tea6415c_driver_init+0x0/0x11 @ 1
initcall tea6415c_driver_init+0x0/0x11 returned 0 after 28 usecs
calling saa711x_driver_init+0x0/0x11 @ 1
initcall saa711x_driver_init+0x0/0x11 returned 0 after 29 usecs
calling saa717x_driver_init+0x0/0x11 @ 1
initcall saa717x_driver_init+0x0/0x11 returned 0 after 27 usecs
calling saa7127_driver_init+0x0/0x11 @ 1
initcall saa7127_driver_init+0x0/0x11 returned 0 after 29 usecs
calling saa7185_driver_init+0x0/0x11 @ 1
initcall saa7185_driver_init+0x0/0x11 returned 0 after 27 usecs
calling saa7191_driver_init+0x0/0x11 @ 1
initcall saa7191_driver_init+0x0/0x11 returned 0 after 27 usecs
calling adv7343_driver_init+0x0/0x11 @ 1
initcall adv7343_driver_init+0x0/0x11 returned 0 after 36 usecs
calling adv7393_driver_init+0x0/0x11 @ 1
initcall adv7393_driver_init+0x0/0x11 returned 0 after 28 usecs
calling vpx3220_driver_init+0x0/0x11 @ 1
initcall vpx3220_driver_init+0x0/0x11 returned 0 after 43 usecs
calling bt819_driver_init+0x0/0x11 @ 1
initcall bt819_driver_init+0x0/0x11 returned 0 after 28 usecs
calling ks0127_driver_init+0x0/0x11 @ 1
initcall ks0127_driver_init+0x0/0x11 returned 0 after 28 usecs
calling ths7303_driver_init+0x0/0x11 @ 1
initcall ths7303_driver_init+0x0/0x11 returned 0 after 29 usecs
calling ths8200_driver_init+0x0/0x11 @ 1
initcall ths8200_driver_init+0x0/0x11 returned 0 after 46 usecs
calling tvp5150_driver_init+0x0/0x11 @ 1
initcall tvp5150_driver_init+0x0/0x11 returned 0 after 28 usecs
calling tw2804_driver_init+0x0/0x11 @ 1
initcall tw2804_driver_init+0x0/0x11 returned 0 after 29 usecs
calling tw9903_driver_init+0x0/0x11 @ 1
initcall tw9903_driver_init+0x0/0x11 returned 0 after 107 usecs
calling tw9906_driver_init+0x0/0x11 @ 1
initcall tw9906_driver_init+0x0/0x11 returned 0 after 45 usecs
calling cs53l32a_driver_init+0x0/0x11 @ 1
initcall cs53l32a_driver_init+0x0/0x11 returned 0 after 36 usecs
calling m52790_driver_init+0x0/0x11 @ 1
initcall m52790_driver_init+0x0/0x11 returned 0 after 27 usecs
calling tlv320aic23b_driver_init+0x0/0x11 @ 1
initcall tlv320aic23b_driver_init+0x0/0x11 returned 0 after 28 usecs
calling uda1342_driver_init+0x0/0x11 @ 1
initcall uda1342_driver_init+0x0/0x11 returned 0 after 27 usecs
calling wm8775_driver_init+0x0/0x11 @ 1
initcall wm8775_driver_init+0x0/0x11 returned 0 after 27 usecs
calling wm8739_driver_init+0x0/0x11 @ 1
initcall wm8739_driver_init+0x0/0x11 returned 0 after 27 usecs
calling vp27smpx_driver_init+0x0/0x11 @ 1
initcall vp27smpx_driver_init+0x0/0x11 returned 0 after 36 usecs
calling upd64031a_driver_init+0x0/0x11 @ 1
initcall upd64031a_driver_init+0x0/0x11 returned 0 after 27 usecs
calling upd64083_driver_init+0x0/0x11 @ 1
initcall upd64083_driver_init+0x0/0x11 returned 0 after 34 usecs
calling ml86v7667_i2c_driver_init+0x0/0x11 @ 1
initcall ml86v7667_i2c_driver_init+0x0/0x11 returned 0 after 27 usecs
calling au8522_driver_init+0x0/0x11 @ 1
initcall au8522_driver_init+0x0/0x11 returned 0 after 27 usecs
calling flexcop_module_init+0x0/0x14 @ 1
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
initcall flexcop_module_init+0x0/0x14 returned 0 after 735 usecs
calling saa7146_vv_init_module+0x0/0x7 @ 1
initcall saa7146_vv_init_module+0x0/0x7 returned 0 after 4 usecs
calling smscore_module_init+0x0/0x6b @ 1
initcall smscore_module_init+0x0/0x6b returned 0 after 4 usecs
calling smsdvb_module_init+0x0/0x5f @ 1
initcall smsdvb_module_init+0x0/0x5f returned 0 after 47 usecs
calling budget_init+0x0/0xf @ 1
saa7146: register extension 'budget dvb'
initcall budget_init+0x0/0xf returned 0 after 329 usecs
calling budget_av_init+0x0/0xf @ 1
saa7146: register extension 'budget_av'
initcall budget_av_init+0x0/0xf returned 0 after 1134 usecs
calling av7110_init+0x0/0xf @ 1
saa7146: register extension 'av7110'
initcall av7110_init+0x0/0xf returned 0 after 1603 usecs
calling flexcop_pci_driver_init+0x0/0x16 @ 1
initcall flexcop_pci_driver_init+0x0/0x16 returned 0 after 38 usecs
calling pluto2_driver_init+0x0/0x16 @ 1
initcall pluto2_driver_init+0x0/0x16 returned 0 after 43 usecs
calling pt1_driver_init+0x0/0x16 @ 1
initcall pt1_driver_init+0x0/0x16 returned 0 after 37 usecs
calling module_init_ngene+0x0/0x23 @ 1
nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas
initcall module_init_ngene+0x0/0x23 returned 0 after 443 usecs
calling module_init_ddbridge+0x0/0xa1 @ 1
Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH
initcall module_init_ddbridge+0x0/0xa1 returned 0 after 927 usecs
calling cx25821_init+0x0/0x3d @ 1
cx25821: driver version 0.0.106 loaded
initcall cx25821_init+0x0/0x3d returned 0 after 963 usecs
calling ttusb_dec_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ttusb-dec
initcall ttusb_dec_driver_init+0x0/0x16 returned 0 after 1010 usecs
calling ttusb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ttusb
initcall ttusb_driver_init+0x0/0x16 returned 0 after 331 usecs
calling au0828_init+0x0/0xb5 @ 1
au0828 driver loaded
usbcore: registered new interface driver au0828
initcall au0828_init+0x0/0xb5 returned 0 after 2289 usecs
calling smssdio_module_init+0x0/0x28 @ 1
smssdio: Siano SMS1xxx SDIO driver
smssdio: Copyright Pierre Ossman
initcall smssdio_module_init+0x0/0x28 returned 0 after 2140 usecs
calling pps_ktimer_init+0x0/0x92 @ 1
usb 2-1: new high-speed USB device number 2 using dummy_hcd
pps pps0: new PPS source ktimer
pps pps0: ktimer PPS source registered
initcall pps_ktimer_init+0x0/0x92 returned 0 after 3272 usecs
calling pps_tty_init+0x0/0x94 @ 1
pps_ldisc: PPS line discipline registered
initcall pps_tty_init+0x0/0x94 returned 0 after 460 usecs
calling pps_gpio_driver_init+0x0/0x11 @ 1
initcall pps_gpio_driver_init+0x0/0x11 returned 0 after 63 usecs
calling pda_power_pdrv_init+0x0/0x11 @ 1
initcall pda_power_pdrv_init+0x0/0x11 returned 0 after 38 usecs
calling wm8350_power_driver_init+0x0/0x11 @ 1
initcall wm8350_power_driver_init+0x0/0x11 returned 0 after 31 usecs
calling pm860x_battery_driver_init+0x0/0x11 @ 1
initcall pm860x_battery_driver_init+0x0/0x11 returned 0 after 31 usecs
calling goldfish_battery_device_init+0x0/0x11 @ 1
initcall goldfish_battery_device_init+0x0/0x11 returned 0 after 31 usecs
calling sbs_battery_driver_init+0x0/0x11 @ 1
initcall sbs_battery_driver_init+0x0/0x11 returned 0 after 34 usecs
calling bq27x00_battery_init+0x0/0x7 @ 1
initcall bq27x00_battery_init+0x0/0x7 returned 0 after 4 usecs
calling da903x_battery_driver_init+0x0/0x11 @ 1
initcall da903x_battery_driver_init+0x0/0x11 returned 0 after 31 usecs
calling max17040_i2c_driver_init+0x0/0x11 @ 1
initcall max17040_i2c_driver_init+0x0/0x11 returned 0 after 45 usecs
calling twl4030_madc_battery_driver_init+0x0/0x11 @ 1
initcall twl4030_madc_battery_driver_init+0x0/0x11 returned 0 after 31 usecs
calling pm860x_charger_driver_init+0x0/0x11 @ 1
initcall pm860x_charger_driver_init+0x0/0x11 returned 0 after 31 usecs
calling pcf50633_mbc_driver_init+0x0/0x11 @ 1
initcall pcf50633_mbc_driver_init+0x0/0x11 returned 0 after 38 usecs
calling rx51_battery_driver_init+0x0/0x11 @ 1
initcall rx51_battery_driver_init+0x0/0x11 returned 0 after 31 usecs
calling twl4030_bci_driver_init+0x0/0x14 @ 1
initcall twl4030_bci_driver_init+0x0/0x14 returned -19 after 49 usecs
calling lp8727_driver_init+0x0/0x11 @ 1
initcall lp8727_driver_init+0x0/0x11 returned 0 after 29 usecs
calling lp8788_charger_driver_init+0x0/0x11 @ 1
initcall lp8788_charger_driver_init+0x0/0x11 returned 0 after 31 usecs
calling gpio_charger_driver_init+0x0/0x11 @ 1
initcall gpio_charger_driver_init+0x0/0x11 returned 0 after 46 usecs
calling bq2415x_driver_init+0x0/0x11 @ 1
initcall bq2415x_driver_init+0x0/0x11 returned 0 after 29 usecs
calling bq24190_driver_init+0x0/0x11 @ 1
initcall bq24190_driver_init+0x0/0x11 returned 0 after 28 usecs
calling smb347_driver_init+0x0/0x11 @ 1
initcall smb347_driver_init+0x0/0x11 returned 0 after 28 usecs
calling tps65090_charger_driver_init+0x0/0x11 @ 1
initcall tps65090_charger_driver_init+0x0/0x11 returned 0 after 31 usecs
calling asb100_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall asb100_driver_init+0x0/0x11 returned 0 after 6270 usecs
calling sensors_w83627hf_init+0x0/0x12e @ 1
initcall sensors_w83627hf_init+0x0/0x12e returned -19 after 20 usecs
calling w83793_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall w83793_driver_init+0x0/0x11 returned 0 after 23535 usecs
calling w83795_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
g_ncm gadget: resume
dummy_hcd dummy_hcd.0: port status 0x00100503 has changes
i2c i2c-1: Transaction failed (0x10)!
initcall w83795_driver_init+0x0/0x11 returned 0 after 23502 usecs
calling w83791d_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall w83791d_driver_init+0x0/0x11 returned 0 after 23331 usecs
calling ad7418_driver_init+0x0/0x11 @ 1
initcall ad7418_driver_init+0x0/0x11 returned 0 after 30 usecs
calling adm1021_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
dummy_udc dummy_udc.0: set_address = 2
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
g_ncm gadget: high-speed config #1: CDC Ethernet (NCM)
g_ncm gadget: init ncm ctrl 0
dummy_udc dummy_udc.0: enabled ep5in-int (ep5in-intr) maxpacket 16 stream disabled
g_ncm gadget: notify speed 425984000
g_ncm gadget: notify connect false
i2c i2c-1: Transaction failed (0x10)!
g_ncm gadget: ncm reqa1.80 v0000 i0000 l28
g_ncm gadget: non-CRC mode selected
g_ncm gadget: ncm req21.8a v0000 i0000 l0
i2c i2c-1: Transaction failed (0x10)!
g_ncm gadget: NCM16 selected
g_ncm gadget: ncm req21.84 v0000 i0000 l0
g_ncm gadget: init ncm
g_ncm gadget: activate ncm
dummy_udc dummy_udc.0: enabled ep1in-bulk (ep1in-bulk) maxpacket 512 stream disabled
dummy_udc dummy_udc.0: enabled ep2out-bulk (ep2out-bulk) maxpacket 512 stream disabled
usb0: qlen 10
g_ncm gadget: ncm_close
i2c i2c-1: Transaction failed (0x10)!
usb 2-1: MAC-Address: aa:99:de:d4:76:38
cdc_ncm 2-1:1.0 usb1: register 'cdc_ncm' at usb-dummy_hcd.0-1, CDC NCM, aa:99:de:d4:76:38
i2c i2c-1: Transaction failed (0x10)!
initcall adm1021_driver_init+0x0/0x11 returned 0 after 58900 usecs
calling adm1025_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adm1025_driver_init+0x0/0x11 returned 0 after 17304 usecs
calling adm1026_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adm1026_driver_init+0x0/0x11 returned 0 after 17313 usecs
calling adm1029_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adm1029_driver_init+0x0/0x11 returned 0 after 46601 usecs
calling adm9240_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adm9240_driver_init+0x0/0x11 returned 0 after 23163 usecs
calling ads1015_driver_init+0x0/0x11 @ 1
initcall ads1015_driver_init+0x0/0x11 returned 0 after 29 usecs
calling ads7828_driver_init+0x0/0x11 @ 1
initcall ads7828_driver_init+0x0/0x11 returned 0 after 28 usecs
calling adt7410_driver_init+0x0/0x11 @ 1
initcall adt7410_driver_init+0x0/0x11 returned 0 after 28 usecs
calling adt7411_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adt7411_driver_init+0x0/0x11 returned 0 after 18023 usecs
calling adt7462_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adt7462_driver_init+0x0/0x11 returned 0 after 11450 usecs
calling adt7470_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adt7470_driver_init+0x0/0x11 returned 0 after 17303 usecs
calling adt7475_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall adt7475_driver_init+0x0/0x11 returned 0 after 17313 usecs
calling applesmc_init+0x0/0x2d @ 1
applesmc: supported laptop not found!
applesmc: driver init failed (ret=-19)!
initcall applesmc_init+0x0/0x2d returned -19 after 1859 usecs
calling sm_asc7621_init+0x0/0x73 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall sm_asc7621_init+0x0/0x73 returned 0 after 17720 usecs
calling atxp1_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall atxp1_driver_init+0x0/0x11 returned 0 after 11487 usecs
calling coretemp_init+0x0/0x183 @ 1
initcall coretemp_init+0x0/0x183 returned -19 after 4 usecs
calling dme1737_init+0x0/0x155 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall dme1737_init+0x0/0x155 returned 0 after 17503 usecs
calling ds620_driver_init+0x0/0x11 @ 1
initcall ds620_driver_init+0x0/0x11 returned 0 after 29 usecs
calling ds1621_driver_init+0x0/0x11 @ 1
initcall ds1621_driver_init+0x0/0x11 returned 0 after 29 usecs
calling emc2103_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall emc2103_driver_init+0x0/0x11 returned 0 after 6152 usecs
calling f71882fg_init+0x0/0x114 @ 1
initcall f71882fg_init+0x0/0x114 returned -19 after 31 usecs
calling f75375_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall f75375_driver_init+0x0/0x11 returned 0 after 12401 usecs
calling fam15h_power_driver_init+0x0/0x16 @ 1
initcall fam15h_power_driver_init+0x0/0x16 returned 0 after 61 usecs
calling fschmd_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall fschmd_driver_init+0x0/0x11 returned 0 after 6430 usecs
calling g760a_driver_init+0x0/0x11 @ 1
initcall g760a_driver_init+0x0/0x11 returned 0 after 30 usecs
calling gl520_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall gl520_driver_init+0x0/0x11 returned 0 after 12063 usecs
calling hih6130_driver_init+0x0/0x11 @ 1
initcall hih6130_driver_init+0x0/0x11 returned 0 after 30 usecs
calling htu21_driver_init+0x0/0x11 @ 1
initcall htu21_driver_init+0x0/0x11 returned 0 after 28 usecs
calling i5k_amb_init+0x0/0x56 @ 1
initcall i5k_amb_init+0x0/0x56 returned 0 after 201 usecs
calling aem_init+0x0/0x43 @ 1
initcall aem_init+0x0/0x43 returned 0 after 32 usecs
calling iio_hwmon_driver_init+0x0/0x11 @ 1
initcall iio_hwmon_driver_init+0x0/0x11 returned 0 after 32 usecs
calling ina2xx_driver_init+0x0/0x11 @ 1
initcall ina2xx_driver_init+0x0/0x11 returned 0 after 37 usecs
calling sm_it87_init+0x0/0x5ab @ 1
it87: Found IT8712F chip at 0x290, revision 7
it87: VID is disabled (pins used for GPIO)
it87 it87.656: Detected broken BIOS defaults, disabling PWM interface
initcall sm_it87_init+0x0/0x5ab returned 0 after 3399 usecs
calling k10temp_driver_init+0x0/0x16 @ 1
initcall k10temp_driver_init+0x0/0x16 returned 0 after 47 usecs
calling pem_driver_init+0x0/0x11 @ 1
initcall pem_driver_init+0x0/0x11 returned 0 after 31 usecs
calling lm63_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall lm63_driver_init+0x0/0x11 returned 0 after 17458 usecs
calling lm73_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall lm73_driver_init+0x0/0x11 returned 0 after 34924 usecs
calling lm77_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall lm77_driver_init+0x0/0x11 returned 0 after 23204 usecs
calling sm_lm78_init+0x0/0x393 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall sm_lm78_init+0x0/0x393 returned 0 after 47151 usecs
calling lm80_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall lm80_driver_init+0x0/0x11 returned 0 after 47142 usecs
calling lm95234_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall lm95234_driver_init+0x0/0x11 returned 0 after 17820 usecs
calling ltc4245_driver_init+0x0/0x11 @ 1
initcall ltc4245_driver_init+0x0/0x11 returned 0 after 30 usecs
calling max16065_driver_init+0x0/0x11 @ 1
initcall max16065_driver_init+0x0/0x11 returned 0 after 30 usecs
calling max1619_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall max1619_driver_init+0x0/0x11 returned 0 after 52588 usecs
calling max1668_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall max1668_driver_init+0x0/0x11 returned 0 after 52461 usecs
calling max197_driver_init+0x0/0x11 @ 1
initcall max197_driver_init+0x0/0x11 returned 0 after 36 usecs
calling max6639_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall max6639_driver_init+0x0/0x11 returned 0 after 17888 usecs
calling max6642_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall max6642_driver_init+0x0/0x11 returned 0 after 46603 usecs
calling sensors_nct6775_init+0x0/0x323 @ 1
initcall sensors_nct6775_init+0x0/0x323 returned -19 after 90 usecs
calling ntc_thermistor_driver_init+0x0/0x11 @ 1
initcall ntc_thermistor_driver_init+0x0/0x11 returned 0 after 32 usecs
calling pc87360_init+0x0/0x16f @ 1
pc87360: PC8736x not detected, module not inserted
initcall pc87360_init+0x0/0x16f returned -19 after 1006 usecs
calling pcf8591_init+0x0/0x38 @ 1
initcall pcf8591_init+0x0/0x38 returned 0 after 31 usecs
calling sht15_driver_init+0x0/0x11 @ 1
initcall sht15_driver_init+0x0/0x11 returned 0 after 34 usecs
calling sm_sis5595_init+0x0/0x16 @ 1
initcall sm_sis5595_init+0x0/0x16 returned 0 after 39 usecs
calling smm665_driver_init+0x0/0x11 @ 1
initcall smm665_driver_init+0x0/0x11 returned 0 after 31 usecs
calling smsc47b397_init+0x0/0x167 @ 1
initcall smsc47b397_init+0x0/0x167 returned -19 after 9 usecs
calling sm_smsc47m1_init+0x0/0x244 @ 1
initcall sm_smsc47m1_init+0x0/0x244 returned -19 after 9 usecs
calling thmc50_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall thmc50_driver_init+0x0/0x11 returned 0 after 17778 usecs
calling tmp102_driver_init+0x0/0x11 @ 1
initcall tmp102_driver_init+0x0/0x11 returned 0 after 37 usecs
calling via_cputemp_init+0x0/0x12d @ 1
initcall via_cputemp_init+0x0/0x12d returned -19 after 4 usecs
calling vt1211_init+0x0/0x155 @ 1
initcall vt1211_init+0x0/0x155 returned -19 after 20 usecs
calling sm_vt8231_init+0x0/0x16 @ 1
initcall sm_vt8231_init+0x0/0x16 returned 0 after 38 usecs
calling sensors_w83627ehf_init+0x0/0x130 @ 1
initcall sensors_w83627ehf_init+0x0/0x130 returned -19 after 34 usecs
calling w83l785ts_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall w83l785ts_driver_init+0x0/0x11 returned 0 after 5585 usecs
calling w83l786ng_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall w83l786ng_driver_init+0x0/0x11 returned 0 after 11919 usecs
calling wm831x_hwmon_driver_init+0x0/0x11 @ 1
initcall wm831x_hwmon_driver_init+0x0/0x11 returned 0 after 41 usecs
calling wm8350_hwmon_driver_init+0x0/0x11 @ 1
initcall wm8350_hwmon_driver_init+0x0/0x11 returned 0 after 32 usecs
calling pmbus_driver_init+0x0/0x11 @ 1
initcall pmbus_driver_init+0x0/0x11 returned 0 after 31 usecs
calling adm1275_driver_init+0x0/0x11 @ 1
initcall adm1275_driver_init+0x0/0x11 returned 0 after 30 usecs
calling ltc2978_driver_init+0x0/0x11 @ 1
initcall ltc2978_driver_init+0x0/0x11 returned 0 after 31 usecs
calling max16064_driver_init+0x0/0x11 @ 1
initcall max16064_driver_init+0x0/0x11 returned 0 after 36 usecs
calling max34440_driver_init+0x0/0x11 @ 1
initcall max34440_driver_init+0x0/0x11 returned 0 after 30 usecs
calling max8688_driver_init+0x0/0x11 @ 1
initcall max8688_driver_init+0x0/0x11 returned 0 after 29 usecs
calling ucd9200_driver_init+0x0/0x11 @ 1
initcall ucd9200_driver_init+0x0/0x11 returned 0 after 29 usecs
calling zl6100_driver_init+0x0/0x11 @ 1
initcall zl6100_driver_init+0x0/0x11 returned 0 after 30 usecs
calling pkg_temp_thermal_init+0x0/0x4d6 @ 1
initcall pkg_temp_thermal_init+0x0/0x4d6 returned -19 after 4 usecs
calling vhci_init+0x0/0x26 @ 1
Bluetooth: Virtual HCI driver ver 1.3
initcall vhci_init+0x0/0x26 returned 0 after 1846 usecs
calling bfusb_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver bfusb
initcall bfusb_driver_init+0x0/0x16 returned 0 after 1308 usecs
calling dtl1_driver_init+0x0/0xf @ 1
initcall dtl1_driver_init+0x0/0xf returned 0 after 38 usecs
calling bt3c_driver_init+0x0/0xf @ 1
initcall bt3c_driver_init+0x0/0xf returned 0 after 26 usecs
calling btuart_driver_init+0x0/0xf @ 1
initcall btuart_driver_init+0x0/0xf returned 0 after 26 usecs
calling btsdio_init+0x0/0x26 @ 1
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
initcall btsdio_init+0x0/0x26 returned 0 after 690 usecs
calling btwilink_driver_init+0x0/0x11 @ 1
initcall btwilink_driver_init+0x0/0x11 returned 0 after 35 usecs
calling mmc_blk_init+0x0/0x6d @ 1
initcall mmc_blk_init+0x0/0x6d returned 0 after 27 usecs
calling mmc_test_init+0x0/0xf @ 1
initcall mmc_test_init+0x0/0xf returned 0 after 40 usecs
calling sdio_uart_init+0x0/0xc9 @ 1
initcall sdio_uart_init+0x0/0xc9 returned 0 after 43 usecs
calling sdhci_drv_init+0x0/0x20 @ 1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
initcall sdhci_drv_init+0x0/0x20 returned 0 after 1767 usecs
calling sdhci_driver_init+0x0/0x16 @ 1
initcall sdhci_driver_init+0x0/0x16 returned 0 after 55 usecs
calling goldfish_mmc_driver_init+0x0/0x11 @ 1
initcall goldfish_mmc_driver_init+0x0/0x11 returned 0 after 32 usecs
calling sdricoh_driver_init+0x0/0xf @ 1
initcall sdricoh_driver_init+0x0/0xf returned 0 after 27 usecs
calling ushc_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver ushc
initcall ushc_driver_init+0x0/0x16 returned 0 after 1138 usecs
calling rtsx_pci_sdmmc_driver_init+0x0/0x11 @ 1
initcall rtsx_pci_sdmmc_driver_init+0x0/0x11 returned 0 after 31 usecs
calling sdhci_pltfm_drv_init+0x0/0x14 @ 1
sdhci-pltfm: SDHCI platform and OF driver helper
initcall sdhci_pltfm_drv_init+0x0/0x14 returned 0 after 1645 usecs
calling memstick_init+0x0/0x8c @ 1
initcall memstick_init+0x0/0x8c returned 0 after 141 usecs
calling msb_init+0x0/0x66 @ 1
initcall msb_init+0x0/0x66 returned 0 after 25 usecs
calling tifm_ms_init+0x0/0xf @ 1
initcall tifm_ms_init+0x0/0xf returned 0 after 25 usecs
calling jmb38x_ms_driver_init+0x0/0x16 @ 1
initcall jmb38x_ms_driver_init+0x0/0x16 returned 0 after 46 usecs
calling r852_pci_driver_init+0x0/0x16 @ 1
initcall r852_pci_driver_init+0x0/0x16 returned 0 after 45 usecs
calling rtsx_pci_ms_driver_init+0x0/0x11 @ 1
initcall rtsx_pci_ms_driver_init+0x0/0x11 returned 0 after 33 usecs
calling lm3533_led_driver_init+0x0/0x11 @ 1
initcall lm3533_led_driver_init+0x0/0x11 returned 0 after 31 usecs
calling lm3642_i2c_driver_init+0x0/0x11 @ 1
initcall lm3642_i2c_driver_init+0x0/0x11 returned 0 after 33 usecs
calling pca9532_driver_init+0x0/0x11 @ 1
initcall pca9532_driver_init+0x0/0x11 returned 0 after 31 usecs
calling gpio_led_driver_init+0x0/0x11 @ 1
initcall gpio_led_driver_init+0x0/0x11 returned 0 after 32 usecs
calling lp5523_driver_init+0x0/0x11 @ 1
initcall lp5523_driver_init+0x0/0x11 returned 0 after 30 usecs
calling lp8501_driver_init+0x0/0x11 @ 1
initcall lp8501_driver_init+0x0/0x11 returned 0 after 36 usecs
calling tca6507_driver_init+0x0/0x11 @ 1
initcall tca6507_driver_init+0x0/0x11 returned 0 after 30 usecs
calling ot200_led_driver_init+0x0/0x11 @ 1
initcall ot200_led_driver_init+0x0/0x11 returned 0 after 32 usecs
calling pca963x_driver_init+0x0/0x11 @ 1
initcall pca963x_driver_init+0x0/0x11 returned 0 after 31 usecs
calling da903x_led_driver_init+0x0/0x11 @ 1
initcall da903x_led_driver_init+0x0/0x11 returned 0 after 33 usecs
calling wm8350_led_driver_init+0x0/0x11 @ 1
initcall wm8350_led_driver_init+0x0/0x11 returned 0 after 33 usecs
calling led_pwm_driver_init+0x0/0x11 @ 1
initcall led_pwm_driver_init+0x0/0x11 returned 0 after 31 usecs
calling regulator_led_driver_init+0x0/0x11 @ 1
initcall regulator_led_driver_init+0x0/0x11 returned 0 after 91 usecs
calling lt3593_led_driver_init+0x0/0x11 @ 1
initcall lt3593_led_driver_init+0x0/0x11 returned 0 after 50 usecs
calling lm355x_i2c_driver_init+0x0/0x11 @ 1
initcall lm355x_i2c_driver_init+0x0/0x11 returned 0 after 46 usecs
calling blinkm_driver_init+0x0/0x11 @ 1
i2c i2c-0: Transaction failed (0x10)!
i2c i2c-1: Transaction failed (0x10)!
initcall blinkm_driver_init+0x0/0x11 returned 0 after 5914 usecs
calling timer_trig_init+0x0/0xf @ 1
initcall timer_trig_init+0x0/0xf returned 0 after 45 usecs
calling heartbeat_trig_init+0x0/0x32 @ 1
initcall heartbeat_trig_init+0x0/0x32 returned 0 after 6 usecs
calling bl_trig_init+0x0/0xf @ 1
initcall bl_trig_init+0x0/0xf returned 0 after 4 usecs
calling gpio_trig_init+0x0/0xf @ 1
initcall gpio_trig_init+0x0/0xf returned 0 after 4 usecs
calling ledtrig_cpu_init+0x0/0x53 @ 1
ledtrig-cpu: registered to indicate activity on CPUs
initcall ledtrig_cpu_init+0x0/0x53 returned 0 after 369 usecs
calling transient_trig_init+0x0/0xf @ 1
initcall transient_trig_init+0x0/0xf returned 0 after 4 usecs
calling ledtrig_camera_init+0x0/0x25 @ 1
initcall ledtrig_camera_init+0x0/0x25 returned 0 after 5 usecs
calling ib_core_init+0x0/0xa8 @ 1
initcall ib_core_init+0x0/0xa8 returned 0 after 71 usecs
calling ib_mad_init_module+0x0/0xca @ 1
initcall ib_mad_init_module+0x0/0xca returned 0 after 42 usecs
calling ib_sa_init+0x0/0x59 @ 1
initcall ib_sa_init+0x0/0x59 returned 0 after 80 usecs
calling ib_cm_init+0x0/0x152 @ 1
initcall ib_cm_init+0x0/0x152 returned 0 after 94 usecs
calling iw_cm_init+0x0/0x49 @ 1
initcall iw_cm_init+0x0/0x49 returned 0 after 58 usecs
calling addr_init+0x0/0x58 @ 1
initcall addr_init+0x0/0x58 returned 0 after 76 usecs
calling cma_init+0x0/0xcf @ 1
initcall cma_init+0x0/0xcf returned 0 after 98 usecs
calling mthca_init+0x0/0x15f @ 1
initcall mthca_init+0x0/0x15f returned 0 after 113 usecs
calling c2_pci_driver_init+0x0/0x16 @ 1
initcall c2_pci_driver_init+0x0/0x16 returned 0 after 38 usecs
calling mlx4_ib_init+0x0/0x7d @ 1
initcall mlx4_ib_init+0x0/0x7d returned 0 after 116 usecs
calling mlx5_ib_init+0x0/0x16 @ 1
initcall mlx5_ib_init+0x0/0x16 returned 0 after 39 usecs
calling nes_init_module+0x0/0x100 @ 1
initcall nes_init_module+0x0/0x100 returned 0 after 172 usecs
calling ipoib_init_module+0x0/0x122 @ 1
initcall ipoib_init_module+0x0/0x122 returned 0 after 83 usecs
calling srp_init_module+0x0/0x12b @ 1
initcall srp_init_module+0x0/0x12b returned 0 after 33 usecs
calling isert_init+0x0/0xd4 @ 1
initcall isert_init+0x0/0xd4 returned 0 after 26 usecs
calling dcdbas_init+0x0/0x57 @ 1
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
initcall dcdbas_init+0x0/0x57 returned 0 after 562 usecs
calling cs5535_mfgpt_init+0x0/0x107 @ 1
cs5535-clockevt: Could not allocate MFGPT timer
initcall cs5535_mfgpt_init+0x0/0x107 returned -19 after 1488 usecs
calling hid_init+0x0/0x43 @ 1
initcall hid_init+0x0/0x43 returned 0 after 56 usecs
calling apple_driver_init+0x0/0x16 @ 1
initcall apple_driver_init+0x0/0x16 returned 0 after 32 usecs
calling appleir_driver_init+0x0/0x16 @ 1
initcall appleir_driver_init+0x0/0x16 returned 0 after 24 usecs
calling aureal_driver_init+0x0/0x16 @ 1
initcall aureal_driver_init+0x0/0x16 returned 0 after 24 usecs
calling belkin_driver_init+0x0/0x16 @ 1
initcall belkin_driver_init+0x0/0x16 returned 0 after 24 usecs
calling ch_driver_init+0x0/0x16 @ 1
initcall ch_driver_init+0x0/0x16 returned 0 after 37 usecs
calling ch_driver_init+0x0/0x16 @ 1
initcall ch_driver_init+0x0/0x16 returned 0 after 31 usecs
calling cp_driver_init+0x0/0x16 @ 1
initcall cp_driver_init+0x0/0x16 returned 0 after 24 usecs
calling dr_driver_init+0x0/0x16 @ 1
initcall dr_driver_init+0x0/0x16 returned 0 after 31 usecs
calling ems_driver_init+0x0/0x16 @ 1
initcall ems_driver_init+0x0/0x16 returned 0 after 24 usecs
calling elecom_driver_init+0x0/0x16 @ 1
initcall elecom_driver_init+0x0/0x16 returned 0 after 33 usecs
calling elo_driver_init+0x0/0x74 @ 1
initcall elo_driver_init+0x0/0x74 returned 0 after 85 usecs
calling ez_driver_init+0x0/0x16 @ 1
initcall ez_driver_init+0x0/0x16 returned 0 after 24 usecs
calling gyration_driver_init+0x0/0x16 @ 1
initcall gyration_driver_init+0x0/0x16 returned 0 after 24 usecs
calling holtek_kbd_driver_init+0x0/0x16 @ 1
initcall holtek_kbd_driver_init+0x0/0x16 returned 0 after 24 usecs
calling holtek_mouse_driver_init+0x0/0x16 @ 1
initcall holtek_mouse_driver_init+0x0/0x16 returned 0 after 26 usecs
calling holtek_driver_init+0x0/0x16 @ 1
initcall holtek_driver_init+0x0/0x16 returned 0 after 31 usecs
calling huion_driver_init+0x0/0x16 @ 1
initcall huion_driver_init+0x0/0x16 returned 0 after 24 usecs
calling ks_driver_init+0x0/0x16 @ 1
initcall ks_driver_init+0x0/0x16 returned 0 after 24 usecs
calling keytouch_driver_init+0x0/0x16 @ 1
initcall keytouch_driver_init+0x0/0x16 returned 0 after 25 usecs
calling kye_driver_init+0x0/0x16 @ 1
initcall kye_driver_init+0x0/0x16 returned 0 after 24 usecs
calling magicmouse_driver_init+0x0/0x16 @ 1
initcall magicmouse_driver_init+0x0/0x16 returned 0 after 24 usecs
calling ms_driver_init+0x0/0x16 @ 1
initcall ms_driver_init+0x0/0x16 returned 0 after 25 usecs
calling ntrig_driver_init+0x0/0x16 @ 1
initcall ntrig_driver_init+0x0/0x16 returned 0 after 48 usecs
calling ortek_driver_init+0x0/0x16 @ 1
initcall ortek_driver_init+0x0/0x16 returned 0 after 24 usecs
calling pl_driver_init+0x0/0x16 @ 1
initcall pl_driver_init+0x0/0x16 returned 0 after 24 usecs
calling pl_driver_init+0x0/0x16 @ 1
initcall pl_driver_init+0x0/0x16 returned 0 after 25 usecs
calling picolcd_driver_init+0x0/0x16 @ 1
initcall picolcd_driver_init+0x0/0x16 returned 0 after 25 usecs
calling px_driver_init+0x0/0x16 @ 1
initcall px_driver_init+0x0/0x16 returned 0 after 24 usecs
calling roccat_init+0x0/0x87 @ 1
initcall roccat_init+0x0/0x87 returned 0 after 7 usecs
calling arvo_init+0x0/0x50 @ 1
initcall arvo_init+0x0/0x50 returned 0 after 47 usecs
calling isku_init+0x0/0x50 @ 1
initcall isku_init+0x0/0x50 returned 0 after 53 usecs
calling kone_init+0x0/0x50 @ 1
initcall kone_init+0x0/0x50 returned 0 after 45 usecs
calling koneplus_init+0x0/0x50 @ 1
initcall koneplus_init+0x0/0x50 returned 0 after 53 usecs
calling konepure_init+0x0/0x50 @ 1
initcall konepure_init+0x0/0x50 returned 0 after 46 usecs
calling kovaplus_init+0x0/0x50 @ 1
initcall kovaplus_init+0x0/0x50 returned 0 after 46 usecs
calling lua_driver_init+0x0/0x16 @ 1
initcall lua_driver_init+0x0/0x16 returned 0 after 24 usecs
calling pyra_init+0x0/0x50 @ 1
initcall pyra_init+0x0/0x50 returned 0 after 59 usecs
calling savu_init+0x0/0x50 @ 1
initcall savu_init+0x0/0x50 returned 0 after 45 usecs
calling saitek_driver_init+0x0/0x16 @ 1
initcall saitek_driver_init+0x0/0x16 returned 0 after 24 usecs
calling samsung_driver_init+0x0/0x16 @ 1
initcall samsung_driver_init+0x0/0x16 returned 0 after 25 usecs
calling sony_driver_init+0x0/0x16 @ 1
initcall sony_driver_init+0x0/0x16 returned 0 after 24 usecs
calling speedlink_driver_init+0x0/0x16 @ 1
initcall speedlink_driver_init+0x0/0x16 returned 0 after 24 usecs
calling steelseries_srws1_driver_init+0x0/0x16 @ 1
initcall steelseries_srws1_driver_init+0x0/0x16 returned 0 after 25 usecs
calling sp_driver_init+0x0/0x16 @ 1
initcall sp_driver_init+0x0/0x16 returned 0 after 25 usecs
calling ga_driver_init+0x0/0x16 @ 1
initcall ga_driver_init+0x0/0x16 returned 0 after 31 usecs
calling thingm_driver_init+0x0/0x16 @ 1
initcall thingm_driver_init+0x0/0x16 returned 0 after 24 usecs
calling tm_driver_init+0x0/0x16 @ 1
initcall tm_driver_init+0x0/0x16 returned 0 after 25 usecs
calling tivo_driver_init+0x0/0x16 @ 1
initcall tivo_driver_init+0x0/0x16 returned 0 after 25 usecs
calling twinhan_driver_init+0x0/0x16 @ 1
initcall twinhan_driver_init+0x0/0x16 returned 0 after 24 usecs
calling uclogic_driver_init+0x0/0x16 @ 1
initcall uclogic_driver_init+0x0/0x16 returned 0 after 24 usecs
calling xinmo_driver_init+0x0/0x16 @ 1
initcall xinmo_driver_init+0x0/0x16 returned 0 after 25 usecs
calling zp_driver_init+0x0/0x16 @ 1
initcall zp_driver_init+0x0/0x16 returned 0 after 40 usecs
calling zc_driver_init+0x0/0x16 @ 1
initcall zc_driver_init+0x0/0x16 returned 0 after 26 usecs
calling waltop_driver_init+0x0/0x16 @ 1
initcall waltop_driver_init+0x0/0x16 returned 0 after 24 usecs
calling wiimote_hid_driver_init+0x0/0x16 @ 1
initcall wiimote_hid_driver_init+0x0/0x16 returned 0 after 25 usecs
calling sensor_hub_driver_init+0x0/0x16 @ 1
initcall sensor_hub_driver_init+0x0/0x16 returned 0 after 25 usecs
calling hid_init+0x0/0x45 @ 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
initcall hid_init+0x0/0x45 returned 0 after 1520 usecs
calling vhost_net_init+0x0/0x20 @ 1
initcall vhost_net_init+0x0/0x20 returned 0 after 99 usecs
calling vhost_init+0x0/0x7 @ 1
initcall vhost_init+0x0/0x7 returned 0 after 4 usecs
calling hdaps_init+0x0/0x2d @ 1
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
initcall hdaps_init+0x0/0x2d returned -19 after 2795 usecs
calling goldfish_pdev_bus_driver_init+0x0/0x11 @ 1
goldfish_pdev_bus goldfish_pdev_bus: unable to reserve Goldfish MMIO.
goldfish_pdev_bus: probe of goldfish_pdev_bus failed with error -16
initcall goldfish_pdev_bus_driver_init+0x0/0x11 returned 0 after 2272 usecs
calling hid_accel_3d_platform_driver_init+0x0/0x11 @ 1
initcall hid_accel_3d_platform_driver_init+0x0/0x11 returned 0 after 32 usecs
calling st_accel_driver_init+0x0/0x11 @ 1
initcall st_accel_driver_init+0x0/0x11 returned 0 after 45 usecs
calling exynos_adc_driver_init+0x0/0x11 @ 1
initcall exynos_adc_driver_init+0x0/0x11 returned 0 after 48 usecs
calling lp8788_adc_driver_init+0x0/0x11 @ 1
initcall lp8788_adc_driver_init+0x0/0x11 returned 0 after 32 usecs
calling max1363_driver_init+0x0/0x11 @ 1
initcall max1363_driver_init+0x0/0x11 returned 0 after 32 usecs
calling tiadc_driver_init+0x0/0x11 @ 1
initcall tiadc_driver_init+0x0/0x11 returned 0 after 32 usecs
calling twl6030_gpadc_driver_init+0x0/0x11 @ 1
initcall twl6030_gpadc_driver_init+0x0/0x11 returned 0 after 33 usecs
calling vprbrd_adc_driver_init+0x0/0x11 @ 1
initcall vprbrd_adc_driver_init+0x0/0x11 returned 0 after 45 usecs
calling ad5380_spi_init+0x0/0x11 @ 1
initcall ad5380_spi_init+0x0/0x11 returned 0 after 31 usecs
calling ad5446_init+0x0/0x11 @ 1
initcall ad5446_init+0x0/0x11 returned 0 after 30 usecs
calling mcp4725_driver_init+0x0/0x11 @ 1
initcall mcp4725_driver_init+0x0/0x11 returned 0 after 29 usecs
calling hid_gyro_3d_platform_driver_init+0x0/0x11 @ 1
initcall hid_gyro_3d_platform_driver_init+0x0/0x11 returned 0 after 34 usecs
calling itg3200_driver_init+0x0/0x11 @ 1
initcall itg3200_driver_init+0x0/0x11 returned 0 after 31 usecs
calling st_gyro_driver_init+0x0/0x11 @ 1
initcall st_gyro_driver_init+0x0/0x11 returned 0 after 29 usecs
calling inv_mpu_driver_init+0x0/0x11 @ 1
initcall inv_mpu_driver_init+0x0/0x11 returned 0 after 29 usecs
calling adjd_s311_driver_init+0x0/0x11 @ 1
initcall adjd_s311_driver_init+0x0/0x11 returned 0 after 29 usecs
calling apds9300_driver_init+0x0/0x11 @ 1
initcall apds9300_driver_init+0x0/0x11 returned 0 after 36 usecs
calling hid_als_platform_driver_init+0x0/0x11 @ 1
initcall hid_als_platform_driver_init+0x0/0x11 returned 0 after 33 usecs
calling vcnl4000_driver_init+0x0/0x11 @ 1
initcall vcnl4000_driver_init+0x0/0x11 returned 0 after 30 usecs
calling hid_magn_3d_platform_driver_init+0x0/0x11 @ 1
initcall hid_magn_3d_platform_driver_init+0x0/0x11 returned 0 after 32 usecs
calling st_magn_driver_init+0x0/0x11 @ 1
initcall st_magn_driver_init+0x0/0x11 returned 0 after 50 usecs
calling st_press_driver_init+0x0/0x11 @ 1
initcall st_press_driver_init+0x0/0x11 returned 0 after 29 usecs
calling iio_sysfs_trig_init+0x0/0x30 @ 1
initcall iio_sysfs_trig_init+0x0/0x30 returned 0 after 92 usecs
calling vme_init+0x0/0xf @ 1
initcall vme_init+0x0/0xf returned 0 after 42 usecs
calling ca91cx42_driver_init+0x0/0x16 @ 1
initcall ca91cx42_driver_init+0x0/0x16 returned 0 after 61 usecs
calling tsi148_driver_init+0x0/0x16 @ 1
initcall tsi148_driver_init+0x0/0x16 returned 0 after 38 usecs
calling ipack_init+0x0/0x19 @ 1
initcall ipack_init+0x0/0x19 returned 0 after 35 usecs
calling tpci200_pci_drv_init+0x0/0x16 @ 1
initcall tpci200_pci_drv_init+0x0/0x16 returned 0 after 36 usecs
calling fmc_init+0x0/0xf @ 1
initcall fmc_init+0x0/0xf returned 0 after 35 usecs
calling t_init+0x0/0x12 @ 1
initcall t_init+0x0/0x12 returned 0 after 23 usecs
calling fwe_init+0x0/0xf @ 1
initcall fwe_init+0x0/0xf returned 0 after 31 usecs
calling fc_init+0x0/0xf @ 1
initcall fc_init+0x0/0xf returned 0 after 23 usecs
calling sock_diag_init+0x0/0xf @ 1
initcall sock_diag_init+0x0/0xf returned 0 after 27 usecs
calling flow_cache_init_global+0x0/0x10f @ 1
initcall flow_cache_init_global+0x0/0x10f returned 0 after 45 usecs
calling llc_init+0x0/0x1b @ 1
initcall llc_init+0x0/0x1b returned 0 after 4 usecs
calling llc2_init+0x0/0xbd @ 1
NET: Registered protocol family 26
initcall llc2_init+0x0/0xbd returned 0 after 1230 usecs
calling snap_init+0x0/0x33 @ 1
initcall snap_init+0x0/0x33 returned 0 after 28 usecs
calling netlink_diag_init+0x0/0xf @ 1
initcall netlink_diag_init+0x0/0xf returned 0 after 18 usecs
calling nfnetlink_init+0x0/0x49 @ 1
Netfilter messages via NETLINK v0.30.
initcall nfnetlink_init+0x0/0x49 returned 0 after 779 usecs
calling nfnl_acct_init+0x0/0x37 @ 1
nfnl_acct: registering with nfnetlink.
initcall nfnl_acct_init+0x0/0x37 returned 0 after 943 usecs
calling nfnetlink_queue_init+0x0/0x7b @ 1
initcall nfnetlink_queue_init+0x0/0x7b returned 0 after 27 usecs
calling nfnetlink_log_init+0x0/0x9c @ 1
initcall nfnetlink_log_init+0x0/0x9c returned 0 after 40 usecs
calling nf_conntrack_standalone_init+0x0/0x6e @ 1
nf_conntrack version 0.5.0 (15637 buckets, 62548 max)
initcall nf_conntrack_standalone_init+0x0/0x6e returned 0 after 745 usecs
calling nf_conntrack_proto_sctp_init+0x0/0x51 @ 1
initcall nf_conntrack_proto_sctp_init+0x0/0x51 returned 0 after 57 usecs
calling ctnetlink_init+0x0/0x92 @ 1
ctnetlink v0.93: registering with nfnetlink.
initcall ctnetlink_init+0x0/0x92 returned 0 after 984 usecs
calling nf_conntrack_amanda_init+0x0/0x90 @ 1
initcall nf_conntrack_amanda_init+0x0/0x90 returned 0 after 22 usecs
calling nf_conntrack_ftp_init+0x0/0x1bc @ 1
initcall nf_conntrack_ftp_init+0x0/0x1bc returned 0 after 87 usecs
calling nf_conntrack_h323_init+0x0/0xe0 @ 1
initcall nf_conntrack_h323_init+0x0/0xe0 returned 0 after 86 usecs
calling nf_conntrack_irc_init+0x0/0x155 @ 1
initcall nf_conntrack_irc_init+0x0/0x155 returned 0 after 86 usecs
calling nf_conntrack_snmp_init+0x0/0x19 @ 1
initcall nf_conntrack_snmp_init+0x0/0x19 returned 0 after 4 usecs
calling nf_conntrack_sane_init+0x0/0x1b6 @ 1
initcall nf_conntrack_sane_init+0x0/0x1b6 returned 0 after 85 usecs
calling nf_conntrack_sip_init+0x0/0x1e1 @ 1
initcall nf_conntrack_sip_init+0x0/0x1e1 returned 0 after 5 usecs
calling synproxy_core_init+0x0/0x37 @ 1
initcall synproxy_core_init+0x0/0x37 returned 0 after 31 usecs
calling xt_init+0x0/0x8d @ 1
initcall xt_init+0x0/0x8d returned 0 after 13 usecs
calling tcpudp_mt_init+0x0/0x14 @ 1
initcall tcpudp_mt_init+0x0/0x14 returned 0 after 28 usecs
calling mark_mt_init+0x0/0x37 @ 1
initcall mark_mt_init+0x0/0x37 returned 0 after 4 usecs
calling connmark_mt_init+0x0/0x37 @ 1
initcall connmark_mt_init+0x0/0x37 returned 0 after 4 usecs
calling audit_tg_init+0x0/0x14 @ 1
initcall audit_tg_init+0x0/0x14 returned 0 after 4 usecs
calling checksum_tg_init+0x0/0xf @ 1
initcall checksum_tg_init+0x0/0xf returned 0 after 4 usecs
calling classify_tg_init+0x0/0x14 @ 1
initcall classify_tg_init+0x0/0x14 returned 0 after 4 usecs
calling xt_ct_tg_init+0x0/0x3c @ 1
initcall xt_ct_tg_init+0x0/0x3c returned 0 after 4 usecs
calling dscp_tg_init+0x0/0x14 @ 1
initcall dscp_tg_init+0x0/0x14 returned 0 after 4 usecs
calling hl_tg_init+0x0/0x14 @ 1
initcall hl_tg_init+0x0/0x14 returned 0 after 4 usecs
calling hmark_tg_init+0x0/0x14 @ 1
initcall hmark_tg_init+0x0/0x14 returned 0 after 4 usecs
calling led_tg_init+0x0/0xf @ 1
initcall led_tg_init+0x0/0xf returned 0 after 4 usecs
calling log_tg_init+0x0/0x5a @ 1
initcall log_tg_init+0x0/0x5a returned 0 after 6 usecs
calling nflog_tg_init+0x0/0xf @ 1
initcall nflog_tg_init+0x0/0xf returned 0 after 4 usecs
calling nfqueue_tg_init+0x0/0x14 @ 1
initcall nfqueue_tg_init+0x0/0x14 returned 0 after 4 usecs
calling xt_rateest_tg_init+0x0/0x22 @ 1
initcall xt_rateest_tg_init+0x0/0x22 returned 0 after 4 usecs
calling secmark_tg_init+0x0/0xf @ 1
initcall secmark_tg_init+0x0/0xf returned 0 after 4 usecs
calling tproxy_tg_init+0x0/0x1e @ 1
initcall tproxy_tg_init+0x0/0x1e returned 0 after 4 usecs
calling tcpmss_tg_init+0x0/0x14 @ 1
initcall tcpmss_tg_init+0x0/0x14 returned 0 after 4 usecs
calling tcpoptstrip_tg_init+0x0/0x14 @ 1
initcall tcpoptstrip_tg_init+0x0/0x14 returned 0 after 4 usecs
calling tee_tg_init+0x0/0x14 @ 1
initcall tee_tg_init+0x0/0x14 returned 0 after 4 usecs
calling trace_tg_init+0x0/0xf @ 1
initcall trace_tg_init+0x0/0xf returned 0 after 4 usecs
calling idletimer_tg_init+0x0/0xfb @ 1
initcall idletimer_tg_init+0x0/0xfb returned 0 after 111 usecs
calling xt_cluster_mt_init+0x0/0xf @ 1
initcall xt_cluster_mt_init+0x0/0xf returned 0 after 4 usecs
calling connbytes_mt_init+0x0/0xf @ 1
initcall connbytes_mt_init+0x0/0xf returned 0 after 4 usecs
calling connlabel_mt_init+0x0/0xf @ 1
initcall connlabel_mt_init+0x0/0xf returned 0 after 4 usecs
calling connlimit_mt_init+0x0/0xf @ 1
initcall connlimit_mt_init+0x0/0xf returned 0 after 4 usecs
calling conntrack_mt_init+0x0/0x14 @ 1
initcall conntrack_mt_init+0x0/0x14 returned 0 after 4 usecs
calling ecn_mt_init+0x0/0x14 @ 1
initcall ecn_mt_init+0x0/0x14 returned 0 after 4 usecs
calling hashlimit_mt_init+0x0/0x88 @ 1
initcall hashlimit_mt_init+0x0/0x88 returned 0 after 76 usecs
calling helper_mt_init+0x0/0xf @ 1
initcall helper_mt_init+0x0/0xf returned 0 after 4 usecs
calling hl_mt_init+0x0/0x14 @ 1
initcall hl_mt_init+0x0/0x14 returned 0 after 4 usecs
calling iprange_mt_init+0x0/0x14 @ 1
initcall iprange_mt_init+0x0/0x14 returned 0 after 4 usecs
calling ipvs_mt_init+0x0/0xf @ 1
initcall ipvs_mt_init+0x0/0xf returned 0 after 4 usecs
calling limit_mt_init+0x0/0xf @ 1
initcall limit_mt_init+0x0/0xf returned 0 after 4 usecs
calling multiport_mt_init+0x0/0x14 @ 1
initcall multiport_mt_init+0x0/0x14 returned 0 after 4 usecs
calling nfacct_mt_init+0x0/0xf @ 1
initcall nfacct_mt_init+0x0/0xf returned 0 after 4 usecs
calling owner_mt_init+0x0/0xf @ 1
initcall owner_mt_init+0x0/0xf returned 0 after 4 usecs
calling pkttype_mt_init+0x0/0xf @ 1
initcall pkttype_mt_init+0x0/0xf returned 0 after 4 usecs
calling quota_mt_init+0x0/0xf @ 1
initcall quota_mt_init+0x0/0xf returned 0 after 4 usecs
calling xt_rateest_mt_init+0x0/0xf @ 1
initcall xt_rateest_mt_init+0x0/0xf returned 0 after 4 usecs
calling realm_mt_init+0x0/0xf @ 1
initcall realm_mt_init+0x0/0xf returned 0 after 4 usecs
calling string_mt_init+0x0/0xf @ 1
initcall string_mt_init+0x0/0xf returned 0 after 4 usecs
calling tcpmss_mt_init+0x0/0x14 @ 1
initcall tcpmss_mt_init+0x0/0x14 returned 0 after 4 usecs
calling time_mt_init+0x0/0x57 @ 1
xt_time: kernel timezone is -0000
initcall time_mt_init+0x0/0x57 returned 0 after 1059 usecs
calling u32_mt_init+0x0/0xf @ 1
initcall u32_mt_init+0x0/0xf returned 0 after 4 usecs
calling ip_vs_init+0x0/0xe4 @ 1
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Creating netns size=1100 id=0
IPVS: ipvs loaded.
initcall ip_vs_init+0x0/0xe4 returned 0 after 5198 usecs
calling ip_vs_wrr_init+0x0/0xf @ 1
IPVS: [wrr] scheduler registered.
initcall ip_vs_wrr_init+0x0/0xf returned 0 after 83 usecs
calling ip_vs_lc_init+0x0/0xf @ 1
IPVS: [lc] scheduler registered.
initcall ip_vs_lc_init+0x0/0xf returned 0 after 889 usecs
calling ip_vs_lblc_init+0x0/0x33 @ 1
IPVS: [lblc] scheduler registered.
initcall ip_vs_lblc_init+0x0/0x33 returned 0 after 1230 usecs
calling ip_vs_lblcr_init+0x0/0x33 @ 1
IPVS: [lblcr] scheduler registered.
initcall ip_vs_lblcr_init+0x0/0x33 returned 0 after 421 usecs
calling ip_vs_dh_init+0x0/0xf @ 1
IPVS: [dh] scheduler registered.
initcall ip_vs_dh_init+0x0/0xf returned 0 after 889 usecs
calling ip_vs_sh_init+0x0/0xf @ 1
IPVS: [sh] scheduler registered.
initcall ip_vs_sh_init+0x0/0xf returned 0 after 891 usecs
calling ip_vs_sed_init+0x0/0xf @ 1
IPVS: [sed] scheduler registered.
initcall ip_vs_sed_init+0x0/0xf returned 0 after 1059 usecs
calling ip_vs_nq_init+0x0/0xf @ 1
IPVS: [nq] scheduler registered.
initcall ip_vs_nq_init+0x0/0xf returned 0 after 890 usecs
calling sysctl_ipv4_init+0x0/0x7a @ 1
initcall sysctl_ipv4_init+0x0/0x7a returned 0 after 64 usecs
calling ipip_init+0x0/0x7e @ 1
ipip: IPv4 over IPv4 tunneling driver
initcall ipip_init+0x0/0x7e returned 0 after 1085 usecs
calling gre_init+0x0/0x9b @ 1
gre: GRE over IPv4 demultiplexor driver
initcall gre_init+0x0/0x9b returned 0 after 1099 usecs
calling vti_init+0x0/0x6f @ 1
IPv4 over IPSec tunneling driver
initcall vti_init+0x0/0x6f returned 0 after 1163 usecs
calling init_syncookies+0x0/0x16 @ 1
initcall init_syncookies+0x0/0x16 returned 0 after 27 usecs
calling ah4_init+0x0/0x75 @ 1
initcall ah4_init+0x0/0x75 returned 0 after 17 usecs
calling esp4_init+0x0/0x75 @ 1
initcall esp4_init+0x0/0x75 returned 0 after 4 usecs
calling xfrm4_beet_init+0x0/0x14 @ 1
initcall xfrm4_beet_init+0x0/0x14 returned 0 after 16 usecs
calling tunnel4_init+0x0/0x6d @ 1
initcall tunnel4_init+0x0/0x6d returned 0 after 4 usecs
calling xfrm4_transport_init+0x0/0x14 @ 1
initcall xfrm4_transport_init+0x0/0x14 returned 0 after 4 usecs
calling xfrm4_mode_tunnel_init+0x0/0x14 @ 1
initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 4 usecs
calling ipv4_netfilter_init+0x0/0xf @ 1
initcall ipv4_netfilter_init+0x0/0xf returned 0 after 16 usecs
calling nf_defrag_init+0x0/0x14 @ 1
initcall nf_defrag_init+0x0/0x14 returned 0 after 10 usecs
calling ip_tables_init+0x0/0x8d @ 1
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0x8d returned 0 after 969 usecs
calling iptable_filter_init+0x0/0x40 @ 1
initcall iptable_filter_init+0x0/0x40 returned 0 after 30 usecs
calling iptable_mangle_init+0x0/0x40 @ 1
initcall iptable_mangle_init+0x0/0x40 returned 0 after 48 usecs
calling iptable_raw_init+0x0/0x40 @ 1
initcall iptable_raw_init+0x0/0x40 returned 0 after 29 usecs
calling iptable_security_init+0x0/0x40 @ 1
initcall iptable_security_init+0x0/0x40 returned 0 after 25 usecs
calling ecn_tg_init+0x0/0xf @ 1
initcall ecn_tg_init+0x0/0xf returned 0 after 4 usecs
calling synproxy_tg4_init+0x0/0x41 @ 1
initcall synproxy_tg4_init+0x0/0x41 returned 0 after 4 usecs
calling ulog_tg_init+0x0/0x96 @ 1
initcall ulog_tg_init+0x0/0x96 returned 0 after 29 usecs
calling inet_diag_init+0x0/0x6d @ 1
initcall inet_diag_init+0x0/0x6d returned 0 after 12 usecs
calling tcp_diag_init+0x0/0xf @ 1
initcall tcp_diag_init+0x0/0xf returned 0 after 19 usecs
calling cubictcp_register+0x0/0x78 @ 1
TCP: cubic registered
initcall cubictcp_register+0x0/0x78 returned 0 after 982 usecs
calling xfrm_user_init+0x0/0x41 @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x41 returned 0 after 932 usecs
calling unix_diag_init+0x0/0xf @ 1
initcall unix_diag_init+0x0/0xf returned 0 after 4 usecs
calling inet6_init+0x0/0x2f3 @ 1
NET: Registered protocol family 10
initcall inet6_init+0x0/0x2f3 returned 0 after 2596 usecs
calling ah6_init+0x0/0x75 @ 1
initcall ah6_init+0x0/0x75 returned 0 after 4 usecs
calling esp6_init+0x0/0x75 @ 1
initcall esp6_init+0x0/0x75 returned 0 after 4 usecs
calling tunnel6_init+0x0/0x75 @ 1
initcall tunnel6_init+0x0/0x75 returned 0 after 4 usecs
calling xfrm6_transport_init+0x0/0x14 @ 1
initcall xfrm6_transport_init+0x0/0x14 returned 0 after 4 usecs
calling xfrm6_mode_tunnel_init+0x0/0x14 @ 1
initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 4 usecs
calling xfrm6_ro_init+0x0/0x14 @ 1
initcall xfrm6_ro_init+0x0/0x14 returned 0 after 4 usecs
calling xfrm6_beet_init+0x0/0x14 @ 1
initcall xfrm6_beet_init+0x0/0x14 returned 0 after 4 usecs
calling ip6_tables_init+0x0/0x8d @ 1
ip6_tables: (C) 2000-2006 Netfilter Core Team
initcall ip6_tables_init+0x0/0x8d returned 0 after 1139 usecs
calling ip6table_filter_init+0x0/0x40 @ 1
initcall ip6table_filter_init+0x0/0x40 returned 0 after 33 usecs
calling ip6table_mangle_init+0x0/0x40 @ 1
initcall ip6table_mangle_init+0x0/0x40 returned 0 after 68 usecs
calling ip6table_raw_init+0x0/0x40 @ 1
initcall ip6table_raw_init+0x0/0x40 returned 0 after 24 usecs
calling nf_defrag_init+0x0/0x4a @ 1
initcall nf_defrag_init+0x0/0x4a returned 0 after 50 usecs
calling ah_mt6_init+0x0/0xf @ 1
initcall ah_mt6_init+0x0/0xf returned 0 after 4 usecs
calling eui64_mt6_init+0x0/0xf @ 1
initcall eui64_mt6_init+0x0/0xf returned 0 after 4 usecs
calling frag_mt6_init+0x0/0xf @ 1
initcall frag_mt6_init+0x0/0xf returned 0 after 4 usecs
calling ipv6header_mt6_init+0x0/0xf @ 1
initcall ipv6header_mt6_init+0x0/0xf returned 0 after 4 usecs
calling mh_mt6_init+0x0/0xf @ 1
initcall mh_mt6_init+0x0/0xf returned 0 after 4 usecs
calling rpfilter_mt_init+0x0/0xf @ 1
initcall rpfilter_mt_init+0x0/0xf returned 0 after 4 usecs
calling synproxy_tg6_init+0x0/0x41 @ 1
initcall synproxy_tg6_init+0x0/0x41 returned 0 after 4 usecs
calling sit_init+0x0/0xbc @ 1
sit: IPv6 over IPv4 tunneling driver
initcall sit_init+0x0/0xbc returned 0 after 1970 usecs
calling ip6_tunnel_init+0x0/0xb4 @ 1
initcall ip6_tunnel_init+0x0/0xb4 returned 0 after 392 usecs
calling ip6gre_init+0x0/0x98 @ 1
ip6_gre: GRE over IPv6 tunneling driver
initcall ip6gre_init+0x0/0x98 returned 0 after 1477 usecs
calling packet_init+0x0/0x39 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x39 returned 0 after 1248 usecs
calling packet_diag_init+0x0/0xf @ 1
initcall packet_diag_init+0x0/0xf returned 0 after 4 usecs
calling ipsec_pfkey_init+0x0/0x69 @ 1
NET: Registered protocol family 15
initcall ipsec_pfkey_init+0x0/0x69 returned 0 after 253 usecs
calling ipx_init+0x0/0xd6 @ 1
NET: Registered protocol family 4
initcall ipx_init+0x0/0xd6 returned 0 after 1149 usecs
calling atalk_init+0x0/0x78 @ 1
NET: Registered protocol family 5
initcall atalk_init+0x0/0x78 returned 0 after 1121 usecs
calling x25_init+0x0/0x81 @ 1
NET: Registered protocol family 9
X.25 for Linux Version 0.2
initcall x25_init+0x0/0x81 returned 0 after 1963 usecs
calling lapb_init+0x0/0x7 @ 1
initcall lapb_init+0x0/0x7 returned 0 after 4 usecs
calling nr_proto_init+0x0/0x261 @ 1
NET: Registered protocol family 6
initcall nr_proto_init+0x0/0x261 returned 0 after 2061 usecs
calling rose_proto_init+0x0/0x28f @ 1
NET: Registered protocol family 11
initcall rose_proto_init+0x0/0x28f returned 0 after 3669 usecs
calling ax25_init+0x0/0xae @ 1
NET: Registered protocol family 3
initcall ax25_init+0x0/0xae returned 0 after 1089 usecs
calling can_init+0x0/0xe5 @ 1
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
initcall can_init+0x0/0xe5 returned 0 after 1942 usecs
calling bcm_module_init+0x0/0x4c @ 1
can: broadcast manager protocol (rev 20120528 t)
initcall bcm_module_init+0x0/0x4c returned 0 after 697 usecs
calling cgw_module_init+0x0/0x107 @ 1
can: netlink gateway (rev 20130117) max_hops=1
initcall cgw_module_init+0x0/0x107 returned 0 after 350 usecs
calling irlan_init+0x0/0x255 @ 1
initcall irlan_init+0x0/0x255 returned 0 after 426 usecs
calling rfcomm_init+0x0/0xe3 @ 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
initcall rfcomm_init+0x0/0xe3 returned 0 after 2622 usecs
calling hidp_init+0x0/0x21 @ 1
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
initcall hidp_init+0x0/0x21 returned 0 after 2445 usecs
calling init_rpcsec_gss+0x0/0x54 @ 1
initcall init_rpcsec_gss+0x0/0x54 returned 0 after 123 usecs
calling xprt_rdma_init+0x0/0xbc @ 1
RPC: Registered rdma transport module.
initcall xprt_rdma_init+0x0/0xbc returned 0 after 954 usecs
calling svc_rdma_init+0x0/0x193 @ 1
initcall svc_rdma_init+0x0/0x193 returned 0 after 80 usecs
calling af_rxrpc_init+0x0/0x1a0 @ 1
NET: Registered protocol family 33
Key type rxrpc registered
Key type rxrpc_s registered
initcall af_rxrpc_init+0x0/0x1a0 returned 0 after 2949 usecs
calling rxkad_init+0x0/0x2f @ 1
RxRPC: Registered security type 2 'rxkad'
initcall rxkad_init+0x0/0x2f returned 0 after 1650 usecs
calling atm_clip_init+0x0/0x9c @ 1
initcall atm_clip_init+0x0/0x9c returned 0 after 35 usecs
calling br2684_init+0x0/0x4a @ 1
initcall br2684_init+0x0/0x4a returned 0 after 27 usecs
calling lane_module_init+0x0/0x6b @ 1
lec:lane_module_init: lec.c: initialized
initcall lane_module_init+0x0/0x6b returned 0 after 1270 usecs
calling atm_mpoa_init+0x0/0x45 @ 1
mpoa:atm_mpoa_init: mpc.c: initialized
initcall atm_mpoa_init+0x0/0x45 returned 0 after 930 usecs
calling decnet_init+0x0/0x8a @ 1
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 36Kbytes
NET: Registered protocol family 12
initcall decnet_init+0x0/0x8a returned 0 after 2701 usecs
calling dn_rtmsg_init+0x0/0x74 @ 1
initcall dn_rtmsg_init+0x0/0x74 returned 0 after 25 usecs
calling phonet_init+0x0/0x71 @ 1
NET: Registered protocol family 35
initcall phonet_init+0x0/0x71 returned 0 after 1282 usecs
calling pep_register+0x0/0x14 @ 1
initcall pep_register+0x0/0x14 returned 0 after 18 usecs
calling vlan_proto_init+0x0/0x88 @ 1
8021q: 802.1Q VLAN Support v1.8
initcall vlan_proto_init+0x0/0x88 returned 0 after 788 usecs
calling dccp_init+0x0/0x2ec @ 1
DCCP: Activated CCID 2 (TCP-like)
DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
initcall dccp_init+0x0/0x2ec returned 0 after 5991 usecs
calling dccp_v4_init+0x0/0x70 @ 1
initcall dccp_v4_init+0x0/0x70 returned 0 after 87 usecs
calling dccp_v6_init+0x0/0x70 @ 1
initcall dccp_v6_init+0x0/0x70 returned 0 after 81 usecs
calling dccp_diag_init+0x0/0xf @ 1
initcall dccp_diag_init+0x0/0xf returned 0 after 4 usecs
calling sctp_init+0x0/0x495 @ 1
sctp: Hash tables configured (established 32768 bind 29127)
initcall sctp_init+0x0/0x495 returned 0 after 4239 usecs
calling lib80211_init+0x0/0x1c @ 1
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
initcall lib80211_init+0x0/0x1c returned 0 after 2444 usecs
calling lib80211_crypto_wep_init+0x0/0xf @ 1
lib80211_crypt: registered algorithm 'WEP'
initcall lib80211_crypto_wep_init+0x0/0xf returned 0 after 629 usecs
calling lib80211_crypto_ccmp_init+0x0/0xf @ 1
lib80211_crypt: registered algorithm 'CCMP'
initcall lib80211_crypto_ccmp_init+0x0/0xf returned 0 after 799 usecs
calling lib80211_crypto_tkip_init+0x0/0xf @ 1
lib80211_crypt: registered algorithm 'TKIP'
initcall lib80211_crypto_tkip_init+0x0/0xf returned 0 after 1773 usecs
calling tipc_init+0x0/0xee @ 1
tipc: Activated (version 2.0.0)
NET: Registered protocol family 30
tipc: Started in single node mode
initcall tipc_init+0x0/0xee returned 0 after 4563 usecs
calling init_p9+0x0/0x1e @ 1
9pnet: Installing 9P2000 support
initcall init_p9+0x0/0x1e returned 0 after 1881 usecs
calling p9_virtio_init+0x0/0x2d @ 1
initcall p9_virtio_init+0x0/0x2d returned 0 after 38 usecs
calling p9_trans_rdma_init+0x0/0x11 @ 1
initcall p9_trans_rdma_init+0x0/0x11 returned 0 after 4 usecs
calling dcbnl_init+0x0/0x5e @ 1
initcall dcbnl_init+0x0/0x5e returned 0 after 4 usecs
calling af_ieee802154_init+0x0/0x63 @ 1
NET: Registered protocol family 36
initcall af_ieee802154_init+0x0/0x63 returned 0 after 1230 usecs
calling lowpan_init_module+0x0/0x47 @ 1
initcall lowpan_init_module+0x0/0x47 returned 0 after 18 usecs
calling wimax_subsys_init+0x0/0x231 @ 1
initcall wimax_subsys_init+0x0/0x231 returned 0 after 62 usecs
calling init_dns_resolver+0x0/0xce @ 1
Key type dns_resolver registered
initcall init_dns_resolver+0x0/0xce returned 0 after 891 usecs
calling init_ceph_lib+0x0/0x6d @ 1
Key type ceph registered
libceph: loaded (mon/osd proto 15/24)
initcall init_ceph_lib+0x0/0x6d returned 0 after 2249 usecs
calling vmci_transport_init+0x0/0x121 @ 1
NET: Registered protocol family 40
initcall vmci_transport_init+0x0/0x121 returned 0 after 1296 usecs
calling mpls_gso_init+0x0/0x28 @ 1
mpls_gso: MPLS GSO support
initcall mpls_gso_init+0x0/0x28 returned 0 after 852 usecs
calling mcheck_init_device+0x0/0x20d @ 1
initcall mcheck_init_device+0x0/0x20d returned -5 after 4 usecs
calling mcheck_debugfs_init+0x0/0x3e @ 1
initcall mcheck_debugfs_init+0x0/0x3e returned 0 after 45 usecs
calling severities_debugfs_init+0x0/0x40 @ 1
initcall severities_debugfs_init+0x0/0x40 returned 0 after 23 usecs
calling lapic_insert_resource+0x0/0x34 @ 1
initcall lapic_insert_resource+0x0/0x34 returned -1 after 4 usecs
calling io_apic_bug_finalize+0x0/0x1a @ 1
initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 4 usecs
calling print_ICs+0x0/0x40d @ 1
printing PIC contents
printing PIC contents
... PIC IMR: 3618
... PIC IRR: 0001
... PIC ISR: 0000
... PIC ELCR: 0828
printing local APIC contents on CPU#0/0:
... APIC ID: 00000000 (0)
... APIC VERSION: 00000000
... APIC TASKPRI: 00000000 (00)
... APIC RRR: 00000000
... APIC LDR: 00000000
... APIC DFR: 00000000
... APIC SPIV: 00000000
... APIC ISR field:
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... APIC TMR field:
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... APIC IRR field:
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... APIC ICR: 00000000
... APIC ICR2: 00000000
... APIC LVTT: 00000000
... APIC LVT0: 00000000
... APIC LVT1: 00000000
... APIC TMICT: 00000000
... APIC TMCCT: 00000000
... APIC TDCR: 00000000
number of MP IRQ sources: 0.
testing the IO APIC.......................
IRQ to pin mappings:
.................................... done.
initcall print_ICs+0x0/0x40d returned 0 after 8887 usecs
calling print_ipi_mode+0x0/0x2e @ 1
Using IPI Shortcut mode
initcall print_ipi_mode+0x0/0x2e returned 0 after 1320 usecs
calling check_early_ioremap_leak+0x0/0x54 @ 1
initcall check_early_ioremap_leak+0x0/0x54 returned 0 after 4 usecs
calling pat_memtype_list_init+0x0/0x3a @ 1
initcall pat_memtype_list_init+0x0/0x3a returned 0 after 16 usecs
calling init_oops_id+0x0/0x3b @ 1
initcall init_oops_id+0x0/0x3b returned 0 after 4 usecs
calling sched_init_debug+0x0/0x2a @ 1
initcall sched_init_debug+0x0/0x2a returned 0 after 14 usecs
calling pm_qos_power_init+0x0/0x5b @ 1
initcall pm_qos_power_init+0x0/0x5b returned 0 after 216 usecs
calling pm_debugfs_init+0x0/0x2a @ 1
initcall pm_debugfs_init+0x0/0x2a returned 0 after 15 usecs
calling printk_late_init+0x0/0x4c @ 1
initcall printk_late_init+0x0/0x4c returned 0 after 4 usecs
calling tk_debug_sleep_time_init+0x0/0x41 @ 1
initcall tk_debug_sleep_time_init+0x0/0x41 returned 0 after 14 usecs
calling test_ringbuffer+0x0/0x448 @ 1
Running ring buffer tests...
finished
CPU 0:
events: 5000
dropped bytes: 0
alloced bytes: 389428
written bytes: 382036
biggest event: 23
smallest event: 0
read events: 5000
lost events: 0
total events: 5000
recorded len bytes: 389428
recorded size bytes: 382036
Ring buffer PASSED!
initcall test_ringbuffer+0x0/0x448 returned 0 after 9780917 usecs
calling clear_boot_tracer+0x0/0x30 @ 1
initcall clear_boot_tracer+0x0/0x30 returned 0 after 4 usecs
calling set_recommended_min_free_kbytes+0x0/0x6d @ 1
initcall set_recommended_min_free_kbytes+0x0/0x6d returned 0 after 72 usecs
calling afs_init+0x0/0x169 @ 1
kAFS: Red Hat AFS client v0.1 registering.
initcall afs_init+0x0/0x169 returned 0 after 2198 usecs
calling init_trusted+0x0/0xa8 @ 1
Key type trusted registered
initcall init_trusted+0x0/0xa8 returned 0 after 1302 usecs
calling init_encrypted+0x0/0xfa @ 1
Key type encrypted registered
initcall init_encrypted+0x0/0xfa returned 0 after 1961 usecs
calling init_ima+0x0/0x18 @ 1
IMA: No TPM chip found, activating TPM-bypass!
initcall init_ima+0x0/0x18 returned 0 after 1403 usecs
calling prandom_reseed+0x0/0x55 @ 1
initcall prandom_reseed+0x0/0x55 returned 0 after 9 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 17 usecs
calling pci_sysfs_init+0x0/0x48 @ 1
initcall pci_sysfs_init+0x0/0x48 returned 0 after 237 usecs
calling regulator_init_complete+0x0/0x14c @ 1
initcall regulator_init_complete+0x0/0x14c returned 0 after 4 usecs
calling random_int_secret_init+0x0/0x16 @ 1
initcall random_int_secret_init+0x0/0x16 returned 0 after 16 usecs
calling deferred_probe_initcall+0x0/0x73 @ 1
initcall deferred_probe_initcall+0x0/0x73 returned 0 after 99 usecs
calling late_resume_init+0x0/0x1bb @ 1
Magic number: 1:448:497
initcall late_resume_init+0x0/0x1bb returned 0 after 1923 usecs
calling wl1273_core_init+0x0/0x29 @ 1
initcall wl1273_core_init+0x0/0x29 returned 0 after 59 usecs
calling init_netconsole+0x0/0x1a3 @ 1
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x1a3 returned 0 after 2078 usecs
calling vxlan_init_module+0x0/0x8e @ 1
initcall vxlan_init_module+0x0/0x8e returned 0 after 38 usecs
calling gpio_keys_init+0x0/0x11 @ 1
initcall gpio_keys_init+0x0/0x11 returned 0 after 77 usecs
calling edd_init+0x0/0x2bd @ 1
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
initcall edd_init+0x0/0x2bd returned -19 after 1897 usecs
calling firmware_memmap_init+0x0/0x29 @ 1
initcall firmware_memmap_init+0x0/0x29 returned 0 after 56 usecs
calling tcp_congestion_default+0x0/0xf @ 1
initcall tcp_congestion_default+0x0/0xf returned 0 after 4 usecs
calling tcp_fastopen_init+0x0/0x40 @ 1
initcall tcp_fastopen_init+0x0/0x40 returned 0 after 37 usecs
calling ip_auto_config+0x0/0xe11 @ 1
initcall ip_auto_config+0x0/0xe11 returned 0 after 24 usecs
calling initialize_hashrnd+0x0/0x16 @ 1
initcall initialize_hashrnd+0x0/0x16 returned 0 after 6 usecs
async_waiting @ 1
async_continuing @ 1 after 4 usec
EXT3-fs (sda1): recovery required on readonly filesystem
EXT3-fs (sda1): write access will be enabled during recovery
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): recovery complete
EXT3-fs (sda1): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
async_waiting @ 1
async_continuing @ 1 after 4 usec
debug: unmapping init [mem 0xb2d05000-0xb2dbbfff]
Write protecting the kernel text: 19924k
Testing CPA: Reverting b1000000-b2375000
Testing CPA: write protecting again
Write protecting the kernel read-only data: 8024k
Testing CPA: undo b2375000-b2b4b000
Testing CPA: write protecting again
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
INIT: version 2.86 booting
BUG: unable to handle kernel BUG: unable to handle kernel paging requestpaging request at eaf10f40
at eaf10f40
IP:IP: [<b103e0ef>] task_work_run+0x52/0x87
[<b103e0ef>] task_work_run+0x52/0x87
*pde = 3fbf9067 *pde = 3fbf9067 *pte = 3af10060 *pte = 3af10060
Oops: 0000 [#1] Oops: 0000 [#1] DEBUG_PAGEALLOCDEBUG_PAGEALLOC
CPU: 0 PID: 171 Comm: hostname Tainted: G W 3.12.0-rc4-01668-gfd71a04-dirty #229484
task: eaf157a0 ti: eacf2000 task.ti: eacf2000
EIP: 0060:[<b103e0ef>] EFLAGS: 00010282 CPU: 0
EIP is at task_work_run+0x52/0x87
EAX: eaf10f40 EBX: eaf13f40 ECX: 00000000 EDX: eaf10f40
ESI: eaf15a38 EDI: eaf157a0 EBP: eacf3f3c ESP: eacf3f30
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
CR0: 8005003b CR2: eaf10f40 CR3: 3acf6000 CR4: 00000690
Stack:
eaf15a50 eaf15a50 eacf5dc0 eacf5dc0 eaf157a0 eaf157a0 eacf3f8c eacf3f8c b1029d1d b1029d1d 00000000 00000000 b01137a0 b01137a0 eaf157a0 eaf157a0
eaf157a0 eaf157a0 eaf13f40 eaf13f40 00000001 00000001 00000007 00000007 eacf3f88 eacf3f88 b10cdebb b10cdebb 00000001 00000001 eacf5e10 eacf5e10
00000000 00000000 eaf13f48 eaf13f48 00000002 00000002 eaf13f40 eaf13f40 eace1d80 eace1d80 00000000 00000000 eaf157a0 eaf157a0 eacf3fa4 eacf3fa4
Call Trace:
[<b1029d1d>] do_exit+0x291/0x753
[<b10cdebb>] ? vfs_write+0x11f/0x15a
[<b102a262>] do_group_exit+0x59/0x86
[<b102a29f>] SyS_exit_group+0x10/0x10
[<b237365b>] sysenter_do_call+0x12/0x2d
Code:Code: ed ed dc dc b2 b2 0f 0f 45 45 c8 c8 eb eb 02 02 31 31 c9 c9 89 89 d0 d0 0f 0f b1 b1 0e 0e 39 39 c2 c2 75 75 d8 d8 85 85 d2 d2 74 74 41 41 f3 f3 90 90 8b 8b 87 87 d0 d0 02 02 00 00 00 00 85 85 c0 c0 74 74 f4 f4 31 31 db db eb eb 04 04 89 89 d3 d3 89 89 c2 c2 <8b> <8b> 02 02 85 85 c0 c0 89 89 1a 1a 75 75 f4 f4 89 89 d0 d0 ff ff 52 52 04 04 31 31 c9 c9 ba ba 7d 7d 00 00 00 00 00 00 b8 b8
EIP: [<b103e0ef>] EIP: [<b103e0ef>] task_work_run+0x52/0x87task_work_run+0x52/0x87 SS:ESP 0068:eacf3f30
SS:ESP 0068:eacf3f30
CR2: 00000000eaf10f40
---[ end trace a7919e7f17c0a729 ]---
Fixing recursive fault but reboot is needed!
CPA self-test:
4k 262128 large 0 gb 0 x 262128[b0000000-effef000] miss 0
ok.