Re: [PATCH v3 05/10] ARM: dts: omap3-beagle: Use reset-gpios forhsusb2_reset

[Benoit Cousson]

Hi Roger,

Yes, I will. I've been waiting for these ones for so long :-)

Thanks,
Benoit

On 03/10/2013 12:34, Roger Quadros wrote:
> Hi Benoit,
>
> Could you please take the device tree related patches [5 to 10] in this series?
> Thanks.
>
> cheers,
> -roger
>
> On 09/24/2013 11:53 AM, Roger Quadros wrote:
> > We no longer need to model the RESET line as a regulator since
> > the USB phy-nop driver accepts "reset-gpios" property.
> >
> > Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> > ---
> >   arch/arm/boot/dts/omap3-beagle.dts |   13 +------------
> >   1 files changed, 1 insertions(+), 12 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> > index dfd8310..71bde47 100644
> > --- a/arch/arm/boot/dts/omap3-beagle.dts
> > +++ b/arch/arm/boot/dts/omap3-beagle.dts
> > @@ -44,17 +44,6 @@
> >   		};
> >   	};
> >
> > -	/* HS USB Port 2 RESET */
> > -	hsusb2_reset: hsusb2_reset_reg {
> > -		compatible = "regulator-fixed";
> > -		regulator-name = "hsusb2_reset";
> > -		regulator-min-microvolt = <3300000>;
> > -		regulator-max-microvolt = <3300000>;
> > -		gpio = <&gpio5 19 0>;	/* gpio_147 */
> > -		startup-delay-us = <70000>;
> > -		enable-active-high;
> > -	};
> > -
> >   	/* HS USB Port 2 Power */
> >   	hsusb2_power: hsusb2_power_reg {
> >   		compatible = "regulator-fixed";
> > @@ -68,7 +57,7 @@
> >   	/* HS USB Host PHY on PORT 2 */
> >   	hsusb2_phy: hsusb2_phy {
> >   		compatible = "usb-nop-xceiv";
> > -		reset-supply = <&hsusb2_reset>;
> > +		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
> >   		vcc-supply = <&hsusb2_power>;
> >   	};

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/