Re: [PATCHv2 1/9] hwspinlock/core: add common dt bindings and OFhelpers

[Suman Anna]

Kumar,

On 09/27/2013 11:04 AM, Kumar Gala wrote:
> 
> On Sep 17, 2013, at 2:30 PM, Suman Anna wrote:
> 
>> All the platform-specific hwlock driver implementations need the
>> number of locks and the associated base id for registering the
>> locks present within a hwspinlock device with the driver core.
>> These two variables are represented by 'hwlock-num-locks' and
>> 'hwlock-base-id' properties. The documentation and OF helpers to
>> retrieve these common properties have been added to the driver core.
>>
>> Signed-off-by: Suman Anna <s-anna@xxxxxx>
>> ---
>> .../devicetree/bindings/hwlock/hwlock.txt          | 26 +++++++++
>> drivers/hwspinlock/hwspinlock_core.c               | 61 +++++++++++++++++++++-
>> include/linux/hwspinlock.h                         | 11 ++--
>> 3 files changed, 93 insertions(+), 5 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/hwlock/hwlock.txt
>>
>> diff --git a/Documentation/devicetree/bindings/hwlock/hwlock.txt b/Documentation/devicetree/bindings/hwlock/hwlock.txt
>> new file mode 100644
>> index 0000000..789930e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/hwlock/hwlock.txt
>> @@ -0,0 +1,26 @@
>> +Generic hwlock bindings
>> +=======================
>> +
>> +Generic bindings that are common to all the hwlock platform specific driver
>> +implementations, the retrieved values are used for registering the device
>> +specific parameters with the hwspinlock core.
>> +
>> +The validity and need of these common properties may vary from one driver
>> +implementation to another. Look through the individual hwlock driver
>> +binding documentations for identifying which are mandatory and which are
>> +optional for that specific driver.
>> +
>> +Common properties:
>> +- hwlock-base-id:	Base Id for the locks for a particular hwlock device.
>> +			This property is used for representing a set of locks
>> +			present in a hwlock device with a unique base id in
>> +			the driver core. This property is mandatory ONLY if a
>> +			SoC has several hwlock devices.
>> +
>> +			See documentation on struct hwspinlock_pdata in
>> +			linux/hwspinlock.h for more details.
>> +
>> +- hwlock-num-locks:	Number of locks present in a hwlock device. This
>> +			property is needed on hwlock devices, where the number
>> +			of supported locks within a hwlock device cannot be
>> +			read from a register.
>> diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c
>> index 461a0d7..aec32e7 100644
>> --- a/drivers/hwspinlock/hwspinlock_core.c
>> +++ b/drivers/hwspinlock/hwspinlock_core.c
>> @@ -1,7 +1,7 @@
>> /*
>>  * Hardware spinlock framework
>>  *
>> - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
>> + * Copyright (C) 2010-2013 Texas Instruments Incorporated - http://www.ti.com
>>  *
>>  * Contact: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
>>  *
>> @@ -27,6 +27,7 @@
>> #include <linux/hwspinlock.h>
>> #include <linux/pm_runtime.h>
>> #include <linux/mutex.h>
>> +#include <linux/of.h>
>>
>> #include "hwspinlock_internal.h"
>>
>> @@ -308,6 +309,64 @@ out:
>> }
>>
>> /**
>> + * of_hwspin_lock_get_base_id() - OF helper to retrieve base id
>> + * @dn: device node pointer
>> + *
>> + * This is an OF helper function that can be called by the underlying
>> + * platform-specific implementations, to retrieve the base id for the
>> + * set of locks present within a hwspinlock device instance.
>> + *
>> + * Returns the base id value on success, -ENODEV on generic failure or
>> + * an appropriate error code as returned by the OF layer
>> + */
>> +int of_hwspin_lock_get_base_id(struct device_node *dn)
>> +{
>> +	unsigned int val;
>> +	int ret = -ENODEV;
>> +
>> +#ifdef CONFIG_OF
>> +	if (!dn)
>> +		return -ENODEV;
> 
> Checking !dn is done in of_property_read_u32, so you don't need to duplicate

I have added this specifically since my intention is to differentiate
the validity of the node vs the presence of the property within a node.
This property may be optional for some platforms and a must for some
others, and differentiating would allow the individual driver
implementations to make the distinction.

> 
>> +
>> +	ret = of_property_read_u32(dn, "hwlock-base-id", &val);
>> +	if (!ret)
>> +		ret = val;
>> +#endif
>> +
>> +	return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(of_hwspin_lock_get_base_id);
>> +
>> +/**
>> + * of_hwspin_lock_get_num_locks() - OF helper to retrieve number of locks
>> + * @dn: device node pointer
>> + *
>> + * This is an OF helper function that can be called by the underlying
>> + * platform-specific implementations, to retrieve the number of locks
>> + * present within a hwspinlock device instance.
>> + *
>> + * Returns a positive number of locks on success, -ENODEV on generic
>> + * failure or an appropriate error code as returned by the OF layer
>> + */
>> +int of_hwspin_lock_get_num_locks(struct device_node *dn)
>> +{
>> +	unsigned int val;
>> +	int ret = -ENODEV;
>> +
>> +#ifdef CONFIG_OF
>> +	if (!dn)
>> +		return -ENODEV;
> 
> Checking !dn is done in of_property_read_u32, so you don't need to duplicate

Same comment as above.

regards
Suman

> 
>> +
>> +	ret = of_property_read_u32(dn, "hwlock-num-locks", &val);
>> +	if (!ret)
>> +		ret = val ? val : -ENODEV;
>> +#endif
>> +
>> +	return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(of_hwspin_lock_get_num_locks);
>> +
>> +/**
>>  * hwspin_lock_register() - register a new hw spinlock device
>>  * @bank: the hwspinlock device, which usually provides numerous hw locks
>>  * @dev: the backing device
>> diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h
>> index 3343298..1f6a5b8 100644
>> --- a/include/linux/hwspinlock.h
>> +++ b/include/linux/hwspinlock.h
>> @@ -1,7 +1,7 @@
>> /*
>>  * Hardware spinlock public header
>>  *
>> - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
>> + * Copyright (C) 2010-2013 Texas Instruments Incorporated - http://www.ti.com
>>  *
>>  * Contact: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
>>  *
>> @@ -26,6 +26,7 @@
>> #define HWLOCK_IRQ	0x02	/* Disable interrupts, don't save state */
>>
>> struct device;
>> +struct device_node;
>> struct hwspinlock;
>> struct hwspinlock_device;
>> struct hwspinlock_ops;
>> @@ -60,6 +61,8 @@ struct hwspinlock_pdata {
>>
>> #if defined(CONFIG_HWSPINLOCK) || defined(CONFIG_HWSPINLOCK_MODULE)
>>
>> +int of_hwspin_lock_get_base_id(struct device_node *dn);
>> +int of_hwspin_lock_get_num_locks(struct device_node *dn);
>> int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
>> 		const struct hwspinlock_ops *ops, int base_id, int num_locks);
>> int hwspin_lock_unregister(struct hwspinlock_device *bank);
>> @@ -80,9 +83,9 @@ void __hwspin_unlock(struct hwspinlock *, int, unsigned long *);
>>  * code path get compiled away. This way, if CONFIG_HWSPINLOCK is not
>>  * required on a given setup, users will still work.
>>  *
>> - * The only exception is hwspin_lock_register/hwspin_lock_unregister, with which
>> - * we _do_ want users to fail (no point in registering hwspinlock instances if
>> - * the framework is not available).
>> + * The only exception is hwspin_lock_register/hwspin_lock_unregister and
>> + * associated OF helpers, with which we _do_ want users to fail (no point
>> + * in registering hwspinlock instances if the framework is not available).
>>  *
>>  * Note: ERR_PTR(-ENODEV) will still be considered a success for NULL-checking
>>  * users. Others, which care, can still check this with IS_ERR.
>> -- 
>> 1.8.3.3
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/