[PATCH v2 0/5] ARM: shmobile: CPUFreq support on Lager

From: Guennadi Liakhovetski
Date: Thu Sep 26 2013 - 13:21:49 EST

On Lager a da9210 regulator is used to supply DVFS power to the SoC. This
patch series adds I2C and Z-clock support on r8a7790 and CPUFreq support
for the Lager board. Please note, that patch 4/4 is an RFC as explained

Developed on top of today's

git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git devel

plus i2c-rcar patches from my earlier patch series

[PATCH v2 0/5] i2c: rcar: Device Tree support and clock improvements

and the "sh-pfc: r8a7790: Add I2C pin groups and functions" patch from
Ulrich Hecht.

All changes since v1 are noted in respective patches. They all are trivial,
still as soon as test hardware is available, it would be good to run-time
test this version too.

Cc: Guennadi Liakhovetski <g.liakhovetski+renesas@xxxxxxxxx>

Guennadi Liakhovetski (5):
pinctrl: sh-pfc: r8a7790: add pin definitions for the I2C3 interface
ARM: shmobile: r8a7790: add I2C clocks and aliases for the DT mode
ARM: shmobile: r8a7790: add I2C DT nodes
ARM: shmobile: r8a7790: add CPUFreq clock support
ARM: shmobile: lager: (DEVEL) add CPUFreq support

arch/arm/boot/dts/r8a7790-lager-reference.dts | 33 +++++
arch/arm/boot/dts/r8a7790.dtsi | 40 ++++++
arch/arm/mach-shmobile/Kconfig | 2 +
arch/arm/mach-shmobile/board-lager-reference.c | 4 +-
arch/arm/mach-shmobile/clock-r8a7790.c | 160 ++++++++++++++++++++++++
drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 28 ++++
6 files changed, 266 insertions(+), 1 deletions(-)


Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/