Re: [PATCH v5 2/4] media: s5p-tv: Restore vpll clock rate

From: Tomasz Stanislawski
Date: Wed Sep 25 2013 - 11:46:44 EST


Hi,

As you can see sdo, hdmi and mixer are saparate drivers that are
parts of s5p-tv drivers set. Could you rename commit name to
'media: s5p-tv: sdo: Restore vpll clock rate after streamoff'


On 09/21/2013 05:00 PM, Mateusz Krawczuk wrote:
> Restore vpll clock rate if start stream fail or stream is off.
>
> Signed-off-by: Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> drivers/media/platform/s5p-tv/sdo_drv.c | 23 +++++++++++++++++++++--
> 1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/s5p-tv/sdo_drv.c b/drivers/media/platform/s5p-tv/sdo_drv.c
> index 0afa90f..e49ac6c 100644
> --- a/drivers/media/platform/s5p-tv/sdo_drv.c
> +++ b/drivers/media/platform/s5p-tv/sdo_drv.c
> @@ -55,6 +55,8 @@ struct sdo_device {
> struct clk *dacphy;
> /** clock for control of VPLL */
> struct clk *fout_vpll;
> + /** vpll rate before sdo stream was on */
> + unsigned long vpll_rate;
> /** regulator for SDO IP power */
> struct regulator *vdac;
> /** regulator for SDO plug detection */
> @@ -193,17 +195,33 @@ static int sdo_s_power(struct v4l2_subdev *sd, int on)
>
> static int sdo_streamon(struct sdo_device *sdev)
> {
> + int ret;
> +
> /* set proper clock for Timing Generator */
> - clk_set_rate(sdev->fout_vpll, 54000000);
> + sdev->vpll_rate = clk_get_rate(sdev->fout_vpll);
> + ret = clk_set_rate(sdev->fout_vpll, 54000000);
> + if (ret < 0) {
> + dev_err(sdev->dev, "Failed to set vpll rate\n");
> + return ret;
> + }
> dev_info(sdev->dev, "fout_vpll.rate = %lu\n",

Could you also remove the line below in a new 'sdo: cleanup' patch?
Change dev_info to dev_dbg in the line above.

> clk_get_rate(sdev->fout_vpll));
> /* enable clock in SDO */
> sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON);
> - clk_enable(sdev->dacphy);
> + ret = clk_enable(sdev->dacphy);
> + if (ret < 0) {
> + dev_err(sdev->dev, "clk_enable(dacphy) failed\n");
> + goto fail;
> + }
> /* enable DAC */
> sdo_write_mask(sdev, SDO_DAC, ~0, SDO_POWER_ON_DAC);
> sdo_reg_debug(sdev);
> return 0;
> +
> +fail:
> + sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON);
> + clk_set_rate(sdev->fout_vpll, sdev->vpll_rate);
> + return ret;
> }
>
> static int sdo_streamoff(struct sdo_device *sdev)
> @@ -220,6 +238,7 @@ static int sdo_streamoff(struct sdo_device *sdev)
> }
> if (tries == 0)
> dev_err(sdev->dev, "failed to stop streaming\n");

Produce some warning if the line below fails.

> + clk_set_rate(sdev->fout_vpll, sdev->vpll_rate);
> return tries ? 0 : -EIO;
> }
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/