[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.0-rc1+ (lab@usb3-otg-test2) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #23 SMP Wed Sep 18 18:31:25 PDT 2013 [ 0.000000] Command line: ro root=UUID=367c651c-6ad1-4b5e-99d4-18e5544747df rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet vga=775 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/P6X58D PREMIUM, BIOS 0703 02/24/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EBFFF write-through [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02b1d000, 0x02b1dfff] PGTABLE [ 0.000000] BRK [0x02b1e000, 0x02b1efff] PGTABLE [ 0.000000] BRK [0x02b1f000, 0x02b1ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M [ 0.000000] BRK [0x02b20000, 0x02b20fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff] [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M [ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k [ 0.000000] RAMDISK: [mem 0x37afb000-0x37feffff] [ 0.000000] ACPI: RSDP 00000000000fba70 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 022410 RSDT1223 20100224 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 022410 FACP1223 20100224 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf7804b0 0B003 (v01 A1382 A1382001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf798000 00040 [ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 022410 APIC1223 20100224 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 022410 OEMMCFG 20100224 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 022410 OEMB1223 20100224 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 022410 OEMHPET 20100224 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 022410 OEMOSFR 20100224 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf799ee0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] [ 0.000000] NODE_DATA [mem 0x13fff9000-0x13fffcfff] [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x13fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbf77ffff] [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] [ 0.000000] On node 0 totalpages: 1046302 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12190 pages used for memmap [ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e5000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7dbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83648 r8192 d22848 u131072 [ 0.000000] pcpu-alloc: s83648 r8192 d22848 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029931 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: ro root=UUID=367c651c-6ad1-4b5e-99d4-18e5544747df rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet vga=775 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4018532K/4185208K available (9199K kernel code, 1065K rwdata, 3652K rodata, 1080K init, 11240K bss, 166676K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16. [ 0.000000] NR_IRQS:4352 nr_irqs:1216 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2806.580 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5613.16 BogoMIPS (lpj=2806580) [ 0.000007] pid_max: default: 32768 minimum: 301 [ 0.000078] Security Framework initialized [ 0.000081] SELinux: Initializing. [ 0.000128] SELinux: Starting in permissive mode [ 0.000458] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001295] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001649] Mount-cache hash table entries: 256 [ 0.002560] Initializing cgroup subsys freezer [ 0.002631] CPU: Physical Processor ID: 0 [ 0.002633] CPU: Processor Core ID: 0 [ 0.002637] mce: CPU supports 9 MCE banks [ 0.002651] CPU0: Thermal monitoring enabled (TM1) [ 0.002668] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.002668] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002668] tlb_flushall_shift: 6 [ 0.002870] Freeing SMP alternatives memory: 28K (ffffffff8201a000 - ffffffff82021000) [ 0.002877] ACPI: Core revision 20130725 [ 0.008904] ACPI: All ACPI Tables successfully acquired [ 0.035100] Switched APIC routing to physical flat. [ 0.035738] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.045745] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05) [ 0.147537] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver. [ 0.147544] perf_event_intel: CPU erratum AAJ80 worked around [ 0.147545] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.147554] ... version: 3 [ 0.147555] ... bit width: 48 [ 0.147557] ... generic registers: 4 [ 0.147558] ... value mask: 0000ffffffffffff [ 0.147559] ... max period: 000000007fffffff [ 0.147561] ... fixed-purpose events: 3 [ 0.147562] ... event mask: 000000070000000f [ 0.148719] SMP alternatives: lockdep: fixing up alternatives [ 0.162318] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.148741] smpboot: Booting Node 0, Processors # 1 [ 0.162529] SMP alternatives: lockdep: fixing up alternatives [ 0.162532] # 2 [ 0.175977] SMP alternatives: lockdep: fixing up alternatives [ 0.175982] # 3 [ 0.189434] SMP alternatives: lockdep: fixing up alternatives [ 0.189439] # 4 [ 0.205181] SMP alternatives: lockdep: fixing up alternatives [ 0.205185] # 5 [ 0.218596] SMP alternatives: lockdep: fixing up alternatives [ 0.218600] # 6 [ 0.232011] SMP alternatives: lockdep: fixing up alternatives [ 0.232015] # 7 OK [ 0.245295] Brought up 8 CPUs [ 0.245300] smpboot: Total of 8 processors activated (44905.28 BogoMIPS) [ 0.251245] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes) [ 0.251654] kworker/u32:0 (49) used greatest stack depth: 4752 bytes left [ 0.251965] pinctrl core: initialized pinctrl subsystem [ 0.252140] RTC time: 11:02:22, date: 09/19/13 [ 0.252323] NET: Registered protocol family 16 [ 0.252977] cpuidle: using governor ladder [ 0.252979] cpuidle: using governor menu [ 0.253073] ACPI: bus type PCI registered [ 0.253293] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.253296] PCI: not using MMCONFIG [ 0.253297] PCI: Using configuration type 1 for base access [ 0.268123] bio: create slab at 0 [ 0.268447] ACPI: Added _OSI(Module Device) [ 0.268449] ACPI: Added _OSI(Processor Device) [ 0.268451] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.268452] ACPI: Added _OSI(Processor Aggregator Device) [ 0.271607] ACPI: EC: Look up EC in DSDT [ 0.274889] ACPI: Executed 1 blocks of module-level executable AML code [ 0.305200] ACPI: SSDT 00000000bf7980c0 01E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.306165] ACPI: Dynamic OEM Table Load: [ 0.306168] ACPI: SSDT (null) 01E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.306552] ACPI: Interpreter enabled [ 0.306563] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.306602] ACPI: (supports S0 S1 S3 S4 S5) [ 0.306604] ACPI: Using IOAPIC for interrupt routing [ 0.306635] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.308769] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.328298] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.328543] ACPI: No dock devices found. [ 0.345166] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.345173] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.345175] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.345395] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.345513] PCI host bridge to bus 0000:00 [ 0.345517] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.345519] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.345521] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.345523] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.345524] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.345526] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 0.345528] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff] [ 0.345577] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000 [ 0.345689] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.345949] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 0.346025] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.346172] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.346307] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400 [ 0.346380] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.346513] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.346604] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 0.346678] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.346810] pci 0000:00:03.0: System wakeup disabled by ACPI [ 0.346900] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 0.346973] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.347108] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.347204] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 0.347448] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 0.347694] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 0.347935] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000 [ 0.348173] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.348225] pci 0000:00:1a.0: reg 0x20: [io 0x9800-0x981f] [ 0.348425] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.348512] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.348567] pci 0000:00:1a.1: reg 0x20: [io 0x9880-0x989f] [ 0.348756] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.348843] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.348894] pci 0000:00:1a.2: reg 0x20: [io 0x9c00-0x9c1f] [ 0.349085] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.349182] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.349207] pci 0000:00:1a.7: reg 0x10: [mem 0xf7dff000-0xf7dff3ff] [ 0.349314] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.349446] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.349538] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.349562] pci 0000:00:1b.0: reg 0x10: [mem 0xf7df8000-0xf7dfbfff 64bit] [ 0.349645] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.349848] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.349934] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.350070] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.350157] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400 [ 0.350242] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.350375] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.350468] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 0.350558] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.350691] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.350778] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.350830] pci 0000:00:1d.0: reg 0x20: [io 0x9080-0x909f] [ 0.351034] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.351124] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.351175] pci 0000:00:1d.1: reg 0x20: [io 0x9400-0x941f] [ 0.351363] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.351449] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.351499] pci 0000:00:1d.2: reg 0x20: [io 0x9480-0x949f] [ 0.351692] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.351789] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.351814] pci 0000:00:1d.7: reg 0x10: [mem 0xf7dfe000-0xf7dfe3ff] [ 0.351921] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.352057] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.352141] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.352321] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.352407] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.352498] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000] [ 0.352503] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.352507] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.352740] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f [ 0.352758] pci 0000:00:1f.2: reg 0x10: [io 0x8000-0x8007] [ 0.352768] pci 0000:00:1f.2: reg 0x14: [io 0x7c00-0x7c03] [ 0.352777] pci 0000:00:1f.2: reg 0x18: [io 0x7880-0x7887] [ 0.352786] pci 0000:00:1f.2: reg 0x1c: [io 0x7800-0x7803] [ 0.352795] pci 0000:00:1f.2: reg 0x20: [io 0x7480-0x748f] [ 0.352804] pci 0000:00:1f.2: reg 0x24: [io 0x7400-0x740f] [ 0.353038] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.353056] pci 0000:00:1f.3: reg 0x10: [mem 0xf7dfd000-0xf7dfd0ff 64bit] [ 0.353081] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.353318] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185 [ 0.353337] pci 0000:00:1f.5: reg 0x10: [io 0x9000-0x9007] [ 0.353346] pci 0000:00:1f.5: reg 0x14: [io 0x8c00-0x8c03] [ 0.353355] pci 0000:00:1f.5: reg 0x18: [io 0x8880-0x8887] [ 0.353364] pci 0000:00:1f.5: reg 0x1c: [io 0x8800-0x8803] [ 0.353373] pci 0000:00:1f.5: reg 0x20: [io 0x8480-0x848f] [ 0.353382] pci 0000:00:1f.5: reg 0x24: [io 0x8400-0x840f] [ 0.353721] pci 0000:01:00.0: [1b4b:914d] type 00 class 0x01018f [ 0.353735] pci 0000:01:00.0: reg 0x10: [io 0xac00-0xac07] [ 0.353744] pci 0000:01:00.0: reg 0x14: [io 0xa880-0xa883] [ 0.353753] pci 0000:01:00.0: reg 0x18: [io 0xa800-0xa807] [ 0.353762] pci 0000:01:00.0: reg 0x1c: [io 0xa480-0xa483] [ 0.353771] pci 0000:01:00.0: reg 0x20: [io 0xa400-0xa40f] [ 0.353781] pci 0000:01:00.0: reg 0x24: [mem 0xf7eff800-0xf7efffff] [ 0.353790] pci 0000:01:00.0: reg 0x30: [mem 0xf7ee0000-0xf7eeffff pref] [ 0.353833] pci 0000:01:00.0: PME# supported from D3hot [ 0.355587] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.355594] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.355600] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.355738] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.355758] pci 0000:02:00.0: reg 0x10: [mem 0xf7ffe000-0xf7ffffff 64bit] [ 0.355855] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.357581] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.357591] pci 0000:00:02.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.357729] pci 0000:03:00.0: [10de:0641] type 00 class 0x030000 [ 0.357742] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.357755] pci 0000:03:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.357768] pci 0000:03:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.357777] pci 0000:03:00.0: reg 0x24: [io 0xbc00-0xbc7f] [ 0.357786] pci 0000:03:00.0: reg 0x30: [mem 0xfba80000-0xfbafffff pref] [ 0.359587] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.359594] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff] [ 0.359600] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbafffff] [ 0.359608] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.359744] pci 0000:04:00.0: [16c3:abcd] type 00 class 0x0c0330 [ 0.359765] pci 0000:04:00.0: reg 0x10: [mem 0xfbbf0000-0xfbbfffff 64bit] [ 0.359862] pci 0000:04:00.0: supports D1 [ 0.359864] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.361593] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.361602] pci 0000:00:07.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.361729] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.361740] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.361865] pci 0000:06:00.0: [11ab:4364] type 00 class 0x020000 [ 0.361892] pci 0000:06:00.0: reg 0x10: [mem 0xfbdfc000-0xfbdfffff 64bit] [ 0.361905] pci 0000:06:00.0: reg 0x18: [io 0xd800-0xd8ff] [ 0.361954] pci 0000:06:00.0: reg 0x30: [mem 0xfbdc0000-0xfbddffff pref] [ 0.362033] pci 0000:06:00.0: supports D1 D2 [ 0.362035] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.363602] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.363608] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.363615] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.363764] pci 0000:05:00.0: [11ab:4364] type 00 class 0x020000 [ 0.363790] pci 0000:05:00.0: reg 0x10: [mem 0xfbcfc000-0xfbcfffff 64bit] [ 0.363803] pci 0000:05:00.0: reg 0x18: [io 0xc800-0xc8ff] [ 0.363852] pci 0000:05:00.0: reg 0x30: [mem 0xfbcc0000-0xfbcdffff pref] [ 0.363929] pci 0000:05:00.0: supports D1 D2 [ 0.363931] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.365606] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.365612] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.365619] pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.365742] pci 0000:08:02.0: [1106:3044] type 00 class 0x0c0010 [ 0.365762] pci 0000:08:02.0: reg 0x10: [mem 0xfbeff000-0xfbeff7ff] [ 0.365774] pci 0000:08:02.0: reg 0x14: [io 0xec00-0xec7f] [ 0.365856] pci 0000:08:02.0: supports D2 [ 0.365858] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold [ 0.365986] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode) [ 0.365991] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.365995] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.366001] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.366003] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.366005] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.366006] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.366008] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.366010] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 0.367459] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.367554] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.367654] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.367748] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.367842] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.367935] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.368029] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15) [ 0.368126] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.368468] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.368477] ACPI: \_SB_.PCI0: notify handler is installed [ 0.368577] Found 1 acpi root devices [ 0.368914] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.368917] vgaarb: loaded [ 0.368919] vgaarb: bridge control possible 0000:03:00.0 [ 0.369102] SCSI subsystem initialized [ 0.369292] libata version 3.00 loaded. [ 0.369453] ACPI: bus type USB registered [ 0.369541] usbcore: registered new interface driver usbfs [ 0.369588] usbcore: registered new interface driver hub [ 0.369659] usbcore: registered new device driver usb [ 0.370372] wmi: Mapper loaded [ 0.370458] Advanced Linux Sound Architecture Driver Initialized. [ 0.370500] PCI: Using ACPI for IRQ routing [ 0.377165] PCI: Discovered peer bus ff [ 0.377167] PCI: root bus ff: using default resources [ 0.377168] PCI: Probing PCI hardware (bus ff) [ 0.377235] PCI host bridge to bus 0000:ff [ 0.377238] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 0.377240] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff] [ 0.377242] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 0.377250] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000 [ 0.377364] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000 [ 0.377459] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000 [ 0.377549] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000 [ 0.377653] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000 [ 0.377743] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000 [ 0.377837] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000 [ 0.377927] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000 [ 0.378017] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000 [ 0.378109] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000 [ 0.378197] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000 [ 0.378289] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000 [ 0.378379] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000 [ 0.378468] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000 [ 0.378556] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000 [ 0.378652] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000 [ 0.378741] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000 [ 0.378829] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000 [ 0.378918] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000 [ 0.379025] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 0.379040] PCI: pci_cache_line_size set to 64 bytes [ 0.379153] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.379160] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff] [ 0.379954] cfg80211: Calling CRDA to update world regulatory domain [ 0.380073] NetLabel: Initializing [ 0.380075] NetLabel: domain hash size = 128 [ 0.380076] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.380130] NetLabel: unlabeled traffic allowed by default [ 0.380351] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.380356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.380361] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.382741] Switched to clocksource hpet [ 0.401866] pnp: PnP ACPI init [ 0.401905] ACPI: bus type PNP registered [ 0.402081] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved [ 0.402084] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 0.402087] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 0.402089] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.402092] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 0.402094] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved [ 0.402119] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.402185] pnp 00:01: [dma 4] [ 0.402261] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.402358] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.402455] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.402545] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.402888] system 00:05: [io 0x0290-0x029f] has been reserved [ 0.402894] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.403207] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.403210] system 00:06: [io 0x0800-0x087f] could not be reserved [ 0.403213] system 00:06: [io 0x0500-0x057f] could not be reserved [ 0.403216] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.403218] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.403221] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.403225] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.403383] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.403523] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active) [ 0.403683] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.403688] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.403926] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.403929] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.403934] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.404128] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.404133] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.404467] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.404470] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.404473] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.404476] system 00:0c: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.404478] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.404483] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.404656] pnp: PnP ACPI: found 13 devices [ 0.404657] ACPI: bus type PNP unregistered [ 0.414251] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 0.414255] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 400000 [ 0.414264] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 [ 0.414273] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 [ 0.414292] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment [ 0.414295] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.414297] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.414299] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.414301] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.414305] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff] [ 0.414308] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.414311] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.414313] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.414317] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.414320] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.414325] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.414332] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.414337] pci 0000:00:02.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.414344] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.414347] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff] [ 0.414351] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbafffff] [ 0.414355] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.414361] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.414365] pci 0000:00:07.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.414372] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.414375] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.414380] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff] [ 0.414384] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.414390] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.414393] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.414397] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.414401] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.414407] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.414410] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.414415] pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.414419] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.414425] pci 0000:00:1e.0: PCI bridge to [bus 08] [ 0.414427] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.414432] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.414441] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.414443] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.414445] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.414446] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.414448] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.414450] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.414452] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.414454] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff] [ 0.414456] pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff] [ 0.414458] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.414459] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbafffff] [ 0.414461] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.414463] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.414465] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 0.414467] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff] [ 0.414469] pci_bus 0000:07: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.414470] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 0.414472] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.414474] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.414476] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.414478] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.414479] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.414481] pci_bus 0000:08: resource 0 [io 0xe000-0xefff] [ 0.414483] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.414485] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 0.414487] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 0.414489] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 0.414490] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff] [ 0.414492] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.414494] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.414497] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 0.414498] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff] [ 0.414540] NET: Registered protocol family 2 [ 0.414928] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.415145] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes) [ 0.417171] TCP: Hash tables configured (established 32768 bind 32768) [ 0.417209] TCP: reno registered [ 0.417233] UDP hash table entries: 2048 (order: 6, 327680 bytes) [ 0.417497] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes) [ 0.417986] NET: Registered protocol family 1 [ 0.418207] RPC: Registered named UNIX socket transport module. [ 0.418209] RPC: Registered udp transport module. [ 0.418211] RPC: Registered tcp transport module. [ 0.418212] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.418536] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.418538] pci 0000:00:1a.0: Performing full reset [ 0.419131] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.419133] pci 0000:00:1a.1: Performing full reset [ 0.419694] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.419695] pci 0000:00:1a.2: Performing full reset [ 0.420877] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.420879] pci 0000:00:1d.0: Performing full reset [ 0.421438] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.421440] pci 0000:00:1d.1: Performing full reset [ 0.422019] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.422021] pci 0000:00:1d.2: Performing full reset [ 0.423055] pci 0000:03:00.0: Boot video device [ 0.439256] pci 0000:04:00.0: xHCI HW did not halt within 16000 usec status = 0x0 [ 0.439334] PCI: CLS 256 bytes, default 64 [ 0.439484] Trying to unpack rootfs image as initramfs... [ 0.526063] Freeing initrd memory: 5076K (ffff880037afb000 - ffff880037ff0000) [ 0.526068] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.526071] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff] [ 0.527875] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0xf [ 0.527887] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0xf [ 0.527894] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0xf [ 0.527902] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0xf [ 0.527910] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0xf [ 0.527917] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0xf [ 0.527923] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0xf [ 0.527932] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0xf [ 0.528004] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.528007] Scanning for low memory corruption every 60 seconds [ 0.529631] audit: initializing netlink socket (disabled) [ 0.529667] type=2000 audit(1379588542.380:1): initialized [ 0.556271] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.561823] VFS: Disk quotas dquot_6.5.2 [ 0.561929] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.563919] NFS: Registering the id_resolver key type [ 0.564005] Key type id_resolver registered [ 0.564006] Key type id_legacy registered [ 0.564108] msgmni has been set to 7858 [ 0.564327] SELinux: Registering netfilter hooks [ 0.565199] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.565218] io scheduler noop registered [ 0.565220] io scheduler deadline registered [ 0.565370] io scheduler cfq registered (default) [ 0.565789] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.566226] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X [ 0.566721] pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X [ 0.567199] pcieport 0000:00:1c.5: irq 66 for MSI/MSI-X [ 0.567528] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.567748] vesafb: mode is 1280x1024x8, linelength=1280, pages=1 [ 0.567750] vesafb: scrolling: redraw [ 0.567752] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 [ 0.567996] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010980000, using 2560k, total 14336k [ 0.618639] Console: switching to colour frame buffer device 160x64 [ 0.668136] fb0: VESA VGA frame buffer device [ 0.668236] intel_idle: MWAIT substates: 0x1120 [ 0.668260] intel_idle: v0.4 model 0x1A [ 0.668261] intel_idle: lapic_timer_reliable_states 0x2 [ 0.668878] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.668916] ACPI: Power Button [PWRB] [ 0.669026] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.669032] ACPI: Power Button [PWRF] [ 0.669322] ACPI: Requesting acpi_cpufreq [ 0.670668] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.672128] Non-volatile memory driver v1.3 [ 0.672409] Linux agpgart interface v0.103 [ 0.672930] [drm] Initialized drm 1.1.0 20060810 [ 0.673105] MXM: GUID detected in BIOS [ 0.673145] checking generic (f9000000 e00000) vs hw (d0000000 10000000) [ 0.673147] checking generic (f9000000 e00000) vs hw (f8000000 2000000) [ 0.673148] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver [ 0.673208] Console: switching to colour dummy device 80x25 [ 0.675231] [drm] hdmi device not found 3 0 1 [ 0.675379] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x096080c1 [ 0.675382] nouveau [ DEVICE][0000:03:00.0] Chipset: G96 (NV96) [ 0.675383] nouveau [ DEVICE][0000:03:00.0] Family : NV50 [ 0.677219] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image... [ 0.748780] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid [ 0.748782] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN [ 0.749080] nouveau [ VBIOS][0000:03:00.0] BIT signature found [ 0.749083] nouveau [ VBIOS][0000:03:00.0] version 62.94.29.00.00 [ 0.770296] nouveau 0000:03:00.0: irq 67 for MSI/MSI-X [ 0.770310] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled [ 0.770388] nouveau [ PFB][0000:03:00.0] RAM type: DDR2 [ 0.770390] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB [ 0.770392] nouveau [ PFB][0000:03:00.0] ZCOMP: 2048 tags [ 0.805520] nouveau [ PTHERM][0000:03:00.0] FAN control: PWM [ 0.805530] nouveau [ PTHERM][0000:03:00.0] fan management: disabled [ 0.805574] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes [ 0.806071] [TTM] Zone kernel: Available graphics memory: 2011818 kiB [ 0.806073] [TTM] Initializing pool allocator [ 0.806086] [TTM] Initializing DMA pool allocator [ 0.806157] nouveau [ DRM] VRAM: 512 MiB [ 0.806159] nouveau [ DRM] GART: 1048576 MiB [ 0.806162] nouveau [ DRM] TMDS table version 2.0 [ 0.806164] nouveau [ DRM] DCB version 4.0 [ 0.806166] nouveau [ DRM] DCB outp 00: 02000300 00000028 [ 0.806168] nouveau [ DRM] DCB outp 01: 01000302 00020030 [ 0.806169] nouveau [ DRM] DCB outp 02: 04011310 00000028 [ 0.806171] nouveau [ DRM] DCB outp 03: 02011312 00020030 [ 0.806173] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080 [ 0.806175] nouveau [ DRM] DCB conn 00: 00001030 [ 0.806177] nouveau [ DRM] DCB conn 01: 00002130 [ 0.806179] nouveau [ DRM] DCB conn 02: 00000210 [ 0.806180] nouveau [ DRM] DCB conn 03: 00000211 [ 0.806182] nouveau [ DRM] DCB conn 04: 00000213 [ 0.851585] nouveau W[ DRM] failed to create encoder 0/1/0: -19 [ 0.851589] nouveau W[ DRM] TV-1 has no encoders, removing [ 0.852113] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.852115] [drm] No driver support for vblank timestamp query. [ 0.852360] nouveau [ DRM] 1 available performance level(s) [ 0.852364] nouveau [ DRM] 3: core 550MHz shader 1375MHz memory 400MHz fanspeed 100% [ 0.852366] nouveau [ DRM] c: core 400MHz shader 800MHz memory 399MHz fanspeed 100% [ 1.149805] nouveau [ DRM] MM: using CRYPT for buffer copies [ 1.214750] nouveau [ DRM] allocated 1280x1024 fb: 0x70000, bo ffff880037956c00 [ 1.214932] fbcon: nouveaufb (fb0) is primary device [ 1.274754] Console: switching to colour frame buffer device 160x64 [ 1.276474] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device [ 1.276476] nouveau 0000:03:00.0: registered panic notifier [ 1.276495] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0 [ 1.279866] brd: module loaded [ 1.281671] loop: module loaded [ 1.282306] ata_piix 0000:00:1f.2: version 2.13 [ 1.282653] ata_piix 0000:00:1f.2: MAP [ [ 1.282655] P0 P2 P1 P3 ] [ 1.282723] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.285508] scsi0 : ata_piix [ 1.285806] scsi1 : ata_piix [ 1.285942] ata1: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20 [ 1.285946] ata2: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20 [ 1.286352] ata_piix 0000:00:1f.5: MAP [ [ 1.286354] P0 -- P1 -- ] [ 1.286395] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.288683] scsi2 : ata_piix [ 1.288938] scsi3 : ata_piix [ 1.289165] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20 [ 1.289168] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20 [ 1.289499] sky2: driver version 1.30 [ 1.289596] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3 [ 1.289653] sky2 0000:06:00.0: irq 68 for MSI/MSI-X [ 1.290129] sky2 0000:06:00.0 eth0: addr 48:5b:39:70:5a:13 [ 1.290244] sky2 0000:05:00.0: Yukon-2 EC Ultra chip revision 3 [ 1.290299] sky2 0000:05:00.0: irq 69 for MSI/MSI-X [ 1.290705] sky2 0000:05:00.0 eth1: addr 48:5b:39:70:52:06 [ 1.291089] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.291092] ohci_hcd: block sizes: ed 80 td 96 [ 1.291100] ohci-pci: OHCI PCI platform driver [ 1.291174] uhci_hcd: USB Universal Host Controller Interface driver [ 1.291540] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.291568] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.291886] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.291905] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.291916] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.291918] uhci_hcd 0000:00:1a.0: Performing full reset [ 1.291931] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 1.291976] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800 [ 1.292274] usb usb1: default language 0x0409 [ 1.292295] usb usb1: udev 1, busnum 1, minor = 0 [ 1.292297] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.292299] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.292301] usb usb1: Product: UHCI Host Controller [ 1.292303] usb usb1: Manufacturer: Linux 3.12.0-rc1+ uhci_hcd [ 1.292304] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.292599] usb usb1: usb_probe_device [ 1.292602] usb usb1: configuration #1 chosen from 1 choice [ 1.292740] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.292929] hub 1-0:1.0: usb_probe_interface [ 1.292931] hub 1-0:1.0: usb_probe_interface - got id [ 1.292940] hub 1-0:1.0: USB hub found [ 1.292993] hub 1-0:1.0: 2 ports detected [ 1.292995] hub 1-0:1.0: standalone hub [ 1.292996] hub 1-0:1.0: no power switching (usb 1.0) [ 1.292998] hub 1-0:1.0: individual port over-current protection [ 1.293000] hub 1-0:1.0: power on to power good time: 2ms [ 1.293244] hub 1-0:1.0: local power source is good [ 1.293370] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.293896] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.293900] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.294150] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 1.294159] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.294163] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.294165] uhci_hcd 0000:00:1a.1: Performing full reset [ 1.294178] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 1.294199] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880 [ 1.294254] usb usb2: default language 0x0409 [ 1.294275] usb usb2: udev 1, busnum 2, minor = 128 [ 1.294277] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.294279] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.294281] usb usb2: Product: UHCI Host Controller [ 1.294282] usb usb2: Manufacturer: Linux 3.12.0-rc1+ uhci_hcd [ 1.294284] usb usb2: SerialNumber: 0000:00:1a.1 [ 1.294462] usb usb2: usb_probe_device [ 1.294465] usb usb2: configuration #1 chosen from 1 choice [ 1.294482] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.294639] hub 2-0:1.0: usb_probe_interface [ 1.294642] hub 2-0:1.0: usb_probe_interface - got id [ 1.294647] hub 2-0:1.0: USB hub found [ 1.294666] hub 2-0:1.0: 2 ports detected [ 1.294668] hub 2-0:1.0: standalone hub [ 1.294670] hub 2-0:1.0: no power switching (usb 1.0) [ 1.294671] hub 2-0:1.0: individual port over-current protection [ 1.294673] hub 2-0:1.0: power on to power good time: 2ms [ 1.294693] hub 2-0:1.0: local power source is good [ 1.294744] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.295336] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.295340] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.295506] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 1.295515] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.295519] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.295521] uhci_hcd 0000:00:1a.2: Performing full reset [ 1.295534] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 1.295567] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00 [ 1.295634] usb usb3: default language 0x0409 [ 1.295655] usb usb3: udev 1, busnum 3, minor = 256 [ 1.295657] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.295659] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.295661] usb usb3: Product: UHCI Host Controller [ 1.295662] usb usb3: Manufacturer: Linux 3.12.0-rc1+ uhci_hcd [ 1.295664] usb usb3: SerialNumber: 0000:00:1a.2 [ 1.295846] usb usb3: usb_probe_device [ 1.295849] usb usb3: configuration #1 chosen from 1 choice [ 1.295866] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.295996] hub 3-0:1.0: usb_probe_interface [ 1.295998] hub 3-0:1.0: usb_probe_interface - got id [ 1.296002] hub 3-0:1.0: USB hub found [ 1.296014] hub 3-0:1.0: 2 ports detected [ 1.296016] hub 3-0:1.0: standalone hub [ 1.296017] hub 3-0:1.0: no power switching (usb 1.0) [ 1.296019] hub 3-0:1.0: individual port over-current protection [ 1.296021] hub 3-0:1.0: power on to power good time: 2ms [ 1.296195] hub 3-0:1.0: local power source is good [ 1.296242] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.296682] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.296686] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.296852] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.296861] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.296865] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.296867] uhci_hcd 0000:00:1d.0: Performing full reset [ 1.296880] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 1.296901] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080 [ 1.296958] usb usb4: default language 0x0409 [ 1.296978] usb usb4: udev 1, busnum 4, minor = 384 [ 1.296980] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.296982] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.296984] usb usb4: Product: UHCI Host Controller [ 1.296986] usb usb4: Manufacturer: Linux 3.12.0-rc1+ uhci_hcd [ 1.296987] usb usb4: SerialNumber: 0000:00:1d.0 [ 1.297308] usb usb4: usb_probe_device [ 1.297311] usb usb4: configuration #1 chosen from 1 choice [ 1.297328] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.297454] hub 4-0:1.0: usb_probe_interface [ 1.297457] hub 4-0:1.0: usb_probe_interface - got id [ 1.297461] hub 4-0:1.0: USB hub found [ 1.297473] hub 4-0:1.0: 2 ports detected [ 1.297474] hub 4-0:1.0: standalone hub [ 1.297476] hub 4-0:1.0: no power switching (usb 1.0) [ 1.297477] hub 4-0:1.0: individual port over-current protection [ 1.297479] hub 4-0:1.0: power on to power good time: 2ms [ 1.297494] hub 4-0:1.0: local power source is good [ 1.297540] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.297983] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.297986] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.298252] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 1.298261] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.298265] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.298267] uhci_hcd 0000:00:1d.1: Performing full reset [ 1.298280] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 1.298287] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400 [ 1.298346] usb usb5: default language 0x0409 [ 1.298366] usb usb5: udev 1, busnum 5, minor = 512 [ 1.298368] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.298370] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.298372] usb usb5: Product: UHCI Host Controller [ 1.298373] usb usb5: Manufacturer: Linux 3.12.0-rc1+ uhci_hcd [ 1.298375] usb usb5: SerialNumber: 0000:00:1d.1 [ 1.298554] usb usb5: usb_probe_device [ 1.298557] usb usb5: configuration #1 chosen from 1 choice [ 1.298573] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.298704] hub 5-0:1.0: usb_probe_interface [ 1.298706] hub 5-0:1.0: usb_probe_interface - got id [ 1.298710] hub 5-0:1.0: USB hub found [ 1.298722] hub 5-0:1.0: 2 ports detected [ 1.298723] hub 5-0:1.0: standalone hub [ 1.298725] hub 5-0:1.0: no power switching (usb 1.0) [ 1.298726] hub 5-0:1.0: individual port over-current protection [ 1.298728] hub 5-0:1.0: power on to power good time: 2ms [ 1.298743] hub 5-0:1.0: local power source is good [ 1.298789] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.299391] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.299395] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.299549] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 1.299557] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.299562] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.299563] uhci_hcd 0000:00:1d.2: Performing full reset [ 1.299576] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 1.299601] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480 [ 1.299656] usb usb6: default language 0x0409 [ 1.299676] usb usb6: udev 1, busnum 6, minor = 640 [ 1.299678] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.299680] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.299682] usb usb6: Product: UHCI Host Controller [ 1.299683] usb usb6: Manufacturer: Linux 3.12.0-rc1+ uhci_hcd [ 1.299685] usb usb6: SerialNumber: 0000:00:1d.2 [ 1.299864] usb usb6: usb_probe_device [ 1.299867] usb usb6: configuration #1 chosen from 1 choice [ 1.299883] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.300013] hub 6-0:1.0: usb_probe_interface [ 1.300015] hub 6-0:1.0: usb_probe_interface - got id [ 1.300019] hub 6-0:1.0: USB hub found [ 1.300168] hub 6-0:1.0: 2 ports detected [ 1.300172] hub 6-0:1.0: standalone hub [ 1.300173] hub 6-0:1.0: no power switching (usb 1.0) [ 1.300175] hub 6-0:1.0: individual port over-current protection [ 1.300177] hub 6-0:1.0: power on to power good time: 2ms [ 1.300192] hub 6-0:1.0: local power source is good [ 1.300237] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.300721] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.303985] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.304187] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.304811] mousedev: PS/2 mouse device common for all mice [ 1.305837] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 1.306377] rtc_cmos 00:02: RTC can wake from S4 [ 1.306811] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.306860] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.307517] ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20130725/utaddress-251) [ 1.307523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.308950] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 1.309234] hidraw: raw HID events driver (C) Jiri Kosina [ 1.310586] usbcore: registered new interface driver usbhid [ 1.310588] usbhid: USB HID core driver [ 1.310777] AMD IOMMUv2 driver by Joerg Roedel [ 1.310778] AMD IOMMUv2 functionality not available on this system [ 1.312503] snd_hda_intel 0000:00:1b.0: irq 70 for MSI/MSI-X [ 1.335203] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3 [ 1.335525] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 1.335805] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 1.336045] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 1.336227] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 1.336450] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 1.336641] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 1.336777] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 1.338497] Netfilter messages via NETLINK v0.30. [ 1.338547] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.338915] ctnetlink v0.93: registering with nfnetlink. [ 1.339189] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.339266] TCP: cubic registered [ 1.339268] Initializing XFRM netlink socket [ 1.339813] NET: Registered protocol family 10 [ 1.340378] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.340494] sit: IPv6 over IPv4 tunneling driver [ 1.340861] NET: Registered protocol family 17 [ 1.340935] Key type dns_resolver registered [ 1.342205] PM: Hibernation image not present or could not be loaded. [ 1.342232] registered taskstats version 1 [ 1.342967] Magic number: 13:572:24 [ 1.342971] misc cpu_dma_latency: hash matches [ 1.343163] rtc_cmos 00:02: setting system clock to 2013-09-19 11:02:23 UTC (1379588543) [ 1.347237] ALSA device list: [ 1.347240] #0: HDA Intel at 0xf7df8000 irq 70 [ 1.393352] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.393449] hub 1-0:1.0: hub_suspend [ 1.393553] usb usb1: bus auto-suspend, wakeup 1 [ 1.393561] usb usb1: suspend_rh [ 1.394226] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.394240] hub 2-0:1.0: hub_suspend [ 1.394251] usb usb2: bus auto-suspend, wakeup 1 [ 1.394253] usb usb2: suspend_rh [ 1.396220] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.396234] hub 3-0:1.0: hub_suspend [ 1.396244] usb usb3: bus auto-suspend, wakeup 1 [ 1.396247] usb usb3: suspend_rh [ 1.397221] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.397234] hub 4-0:1.0: hub_suspend [ 1.397245] usb usb4: bus auto-suspend, wakeup 1 [ 1.397247] usb usb4: suspend_rh [ 1.398195] uhci_hcd 0000:00:1d.1: port 1 portsc 01ab,00 [ 1.398212] hub 5-0:1.0: port 1: status 0301 change 0003 [ 1.398306] uhci_hcd 0000:00:1d.1: port 2 portsc 01ab,00 [ 1.398318] hub 5-0:1.0: port 2: status 0301 change 0003 [ 1.400166] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.400178] hub 6-0:1.0: hub_suspend [ 1.400189] usb usb6: bus auto-suspend, wakeup 1 [ 1.400191] usb usb6: suspend_rh [ 1.498242] hub 5-0:1.0: state 7 ports 2 chg 0006 evt 0000 [ 1.498349] hub 5-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 1.527294] tsc: Refined TSC clocksource calibration: 2806.363 MHz [ 1.600233] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 1.605037] ata4: SATA link down (SStatus 0 SControl 300) [ 1.615899] ata3: SATA link down (SStatus 0 SControl 300) [ 1.741476] usb 5-1: skipped 1 descriptor after interface [ 1.746475] usb 5-1: default language 0x0409 [ 1.762481] usb 5-1: udev 2, busnum 5, minor = 513 [ 1.762484] usb 5-1: New USB device found, idVendor=046d, idProduct=c016 [ 1.762486] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.762489] usb 5-1: Product: Optical USB Mouse [ 1.762491] usb 5-1: Manufacturer: Logitech [ 1.762863] usb 5-1: usb_probe_device [ 1.762866] usb 5-1: configuration #1 chosen from 1 choice [ 1.765509] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 1.765700] usbhid 5-1:1.0: usb_probe_interface [ 1.765703] usbhid 5-1:1.0: usb_probe_interface - got id [ 1.779418] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input11 [ 1.780470] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1/input0 [ 1.780643] hub 5-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 1.882449] usb 5-2: new low-speed USB device number 3 using uhci_hcd [ 1.908223] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.908237] ata2.01: SATA link down (SStatus 0 SControl 300) [ 2.026566] usb 5-2: skipped 1 descriptor after interface [ 2.026569] usb 5-2: skipped 1 descriptor after interface [ 2.031566] usb 5-2: default language 0x0409 [ 2.047519] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.047531] ata1.01: SATA link down (SStatus 0 SControl 300) [ 2.047719] usb 5-2: udev 3, busnum 5, minor = 514 [ 2.047722] usb 5-2: New USB device found, idVendor=045e, idProduct=0750 [ 2.047724] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.047726] usb 5-2: Product: Wired Keyboard 600 [ 2.047728] usb 5-2: Manufacturer: Microsoft [ 2.047938] usb 5-2: usb_probe_device [ 2.047941] usb 5-2: configuration #1 chosen from 1 choice [ 2.050586] usb 5-2: adding 5-2:1.0 (config #1, interface 0) [ 2.050765] usbhid 5-2:1.0: usb_probe_interface [ 2.050768] usbhid 5-2:1.0: usb_probe_interface - got id [ 2.066618] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.0/input/input12 [ 2.066788] uhci_hcd 0000:00:1d.1: reserve dev 3 ep81-INT, period 8, phase 4, 118 us [ 2.067054] ata1.00: ATA-8: Corsair Force 3 SSD, 1.3.3, max UDMA/133 [ 2.067057] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.067224] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.1-2/input0 [ 2.067265] usb 5-2: adding 5-2:1.1 (config #1, interface 1) [ 2.067537] usbhid 5-2:1.1: usb_probe_interface [ 2.067539] usbhid 5-2:1.1: usb_probe_interface - got id [ 2.089006] ata1.00: configured for UDMA/133 [ 2.089611] scsi 0:0:0:0: Direct-Access ATA Corsair Force 3 1.3. PQ: 0 ANSI: 5 [ 2.090692] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.090874] sd 0:0:0:0: [sda] Write Protect is off [ 2.090879] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.090908] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.091319] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.092698] sda: sda1 sda2 sda3 [ 2.093989] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.095483] Freeing unused kernel memory: 1080K (ffffffff81f0c000 - ffffffff8201a000) [ 2.095485] Write protecting the kernel read-only data: 14336k [ 2.097868] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.1/input/input13 [ 2.097888] uhci_hcd 0000:00:1d.1: reserve dev 3 ep82-INT, period 8, phase 4, 118 us [ 2.098248] hid-generic 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.1-2/input1 [ 2.098876] Freeing unused kernel memory: 1028K (ffff8800018ff000 - ffff880001a00000) [ 2.100264] Freeing unused kernel memory: 444K (ffff880001d91000 - ffff880001e00000) [ 2.123216] dracut: dracut-006-6.fc14 [ 2.129964] dracut: rd_NO_LUKS: removing cryptoluks activation [ 2.135690] udev[1261]: starting version 161 [ 2.232827] dracut: Starting plymouth daemon [ 2.423956] blkid (1831) used greatest stack depth: 4552 bytes left [ 2.460709] blkid (1962) used greatest stack depth: 4424 bytes left [ 2.508566] EXT3-fs (sda2): recovery required on readonly filesystem [ 2.508569] EXT3-fs (sda2): write access will be enabled during recovery [ 2.528808] Switched to clocksource tsc [ 2.607283] kjournald starting. Commit interval 5 seconds [ 2.608090] EXT3-fs (sda2): recovery complete [ 2.608092] EXT3-fs (sda2): mounted filesystem with writeback data mode [ 2.608396] mount (2039) used greatest stack depth: 4040 bytes left [ 2.611206] dracut: Mounted root filesystem /dev/sda2 [ 2.626679] dracut: Loading SELinux policy [ 2.660960] SELinux: Disabled at runtime. [ 2.661103] SELinux: Unregistering netfilter hooks [ 2.695680] type=1404 audit(1379588544.851:2): selinux=0 auid=4294967295 ses=4294967295 [ 2.700327] load_policy (2049) used greatest stack depth: 3376 bytes left [ 2.700335] dracut: /sbin/load_policy: Can't load policy: No such file or directory [ 2.725712] dracut: Switching root [ 2.880687] sh (2058) used greatest stack depth: 3184 bytes left [ 2.916730] readahead: starting [ 3.033291] udev[2098]: starting version 161 [ 3.130504] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.130507] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 3.130509] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 3.169763] ehci-pci: EHCI PCI platform driver [ 3.170256] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 3.170285] usb usb1: usb auto-resume [ 3.170293] usb usb1: wakeup_rh [ 3.190678] hub 1-0:1.0: hub_resume [ 3.190873] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.190875] usb usb1: unregistering interface 1-0:1.0 [ 3.194515] usb usb6: usb auto-resume [ 3.194519] usb usb6: wakeup_rh [ 3.194743] uhci_hcd 0000:00:1a.0: shutdown urb ffff88003799ee40 ep1in-intr [ 3.197248] usb usb1: usb_disable_device nuking non-ep0 URBs [ 3.197337] usb usb1: bus auto-suspend, wakeup 0 [ 3.197341] usb usb1: suspend_rh [ 3.197363] usb usb2: usb auto-resume [ 3.197369] usb usb2: wakeup_rh [ 3.214732] hub 6-0:1.0: hub_resume [ 3.215202] usb usb4: usb auto-resume [ 3.215207] usb usb4: wakeup_rh [ 3.217837] hub 2-0:1.0: hub_resume [ 3.217993] usb usb2: unregistering interface 2-0:1.0 [ 3.219507] uhci_hcd 0000:00:1a.1: shutdown urb ffff88003799f980 ep1in-intr [ 3.219719] usb usb2: usb_disable_device nuking non-ep0 URBs [ 3.219806] usb usb2: bus auto-suspend, wakeup 0 [ 3.219810] usb usb2: suspend_rh [ 3.219832] usb usb3: usb auto-resume [ 3.219838] usb usb3: wakeup_rh [ 3.235664] hub 4-0:1.0: hub_resume [ 3.240672] hub 3-0:1.0: hub_resume [ 3.240789] usb usb3: unregistering interface 3-0:1.0 [ 3.241139] uhci_hcd 0000:00:1a.2: shutdown urb ffff880037a08540 ep1in-intr [ 3.242107] usb usb3: usb_disable_device nuking non-ep0 URBs [ 3.242172] usb usb3: bus auto-suspend, wakeup 0 [ 3.242176] usb usb3: suspend_rh [ 3.242214] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 3.242465] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 3.242494] ehci-pci 0000:00:1a.7: debug port 1 [ 3.242500] ehci-pci 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 3.242505] ehci-pci 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 3.242608] ehci-pci 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 3.246499] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported [ 3.246503] ehci-pci 0000:00:1a.7: supports USB remote wakeup [ 3.246524] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf7dff000 [ 3.246531] ehci-pci 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 3.251666] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.251886] usb usb7: default language 0x0409 [ 3.251929] usb usb7: udev 1, busnum 7, minor = 768 [ 3.251931] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.251934] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.251936] usb usb7: Product: EHCI Host Controller [ 3.251937] usb usb7: Manufacturer: Linux 3.12.0-rc1+ ehci_hcd [ 3.251939] usb usb7: SerialNumber: 0000:00:1a.7 [ 3.252156] usb usb7: usb_probe_device [ 3.252160] usb usb7: configuration #1 chosen from 1 choice [ 3.252288] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 3.252424] hub 7-0:1.0: usb_probe_interface [ 3.252428] hub 7-0:1.0: usb_probe_interface - got id [ 3.252440] hub 7-0:1.0: USB hub found [ 3.252523] hub 7-0:1.0: 6 ports detected [ 3.252527] hub 7-0:1.0: standalone hub [ 3.252529] hub 7-0:1.0: no power switching (usb 1.0) [ 3.252532] hub 7-0:1.0: individual port over-current protection [ 3.252535] hub 7-0:1.0: power on to power good time: 20ms [ 3.252655] hub 7-0:1.0: local power source is good [ 3.252950] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 3.253210] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 3.253216] usb usb1: usb auto-resume [ 3.253218] usb usb1: wakeup_rh [ 3.273930] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 3.274057] hub 1-0:1.0: usb_probe_interface [ 3.274059] hub 1-0:1.0: usb_probe_interface - got id [ 3.274065] hub 1-0:1.0: USB hub found [ 3.274083] hub 1-0:1.0: 2 ports detected [ 3.274085] hub 1-0:1.0: standalone hub [ 3.274086] hub 1-0:1.0: no power switching (usb 1.0) [ 3.274088] hub 1-0:1.0: individual port over-current protection [ 3.274089] hub 1-0:1.0: power on to power good time: 2ms [ 3.274150] hub 1-0:1.0: local power source is good [ 3.274328] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 3.274458] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 3.274467] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.274468] usb usb2: usb auto-resume [ 3.274470] usb usb2: wakeup_rh [ 3.274483] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.274495] hub 6-0:1.0: hub_suspend [ 3.274514] usb usb6: bus auto-suspend, wakeup 1 [ 3.274517] usb usb6: suspend_rh [ 3.274540] hub 4-0:1.0: hub_suspend [ 3.274549] usb usb4: bus auto-suspend, wakeup 1 [ 3.274551] usb usb4: suspend_rh [ 3.294881] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 3.294982] hub 2-0:1.0: usb_probe_interface [ 3.294985] hub 2-0:1.0: usb_probe_interface - got id [ 3.294989] hub 2-0:1.0: USB hub found [ 3.295003] hub 2-0:1.0: 2 ports detected [ 3.295005] hub 2-0:1.0: standalone hub [ 3.295007] hub 2-0:1.0: no power switching (usb 1.0) [ 3.295008] hub 2-0:1.0: individual port over-current protection [ 3.295010] hub 2-0:1.0: power on to power good time: 2ms [ 3.295025] hub 2-0:1.0: local power source is good [ 3.295077] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 3.295223] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 3.295228] usb usb3: usb auto-resume [ 3.295230] usb usb3: wakeup_rh [ 3.315916] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 3.316020] hub 3-0:1.0: usb_probe_interface [ 3.316022] hub 3-0:1.0: usb_probe_interface - got id [ 3.316027] hub 3-0:1.0: USB hub found [ 3.316042] hub 3-0:1.0: 2 ports detected [ 3.316043] hub 3-0:1.0: standalone hub [ 3.316045] hub 3-0:1.0: no power switching (usb 1.0) [ 3.316046] hub 3-0:1.0: individual port over-current protection [ 3.316048] hub 3-0:1.0: power on to power good time: 2ms [ 3.316063] hub 3-0:1.0: local power source is good [ 3.316151] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 3.316762] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 3.316778] usb usb4: usb auto-resume [ 3.316780] usb usb4: wakeup_rh [ 3.337700] hub 4-0:1.0: hub_resume [ 3.337752] usb usb4: unregistering interface 4-0:1.0 [ 3.337754] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.337855] uhci_hcd 0000:00:1d.0: shutdown urb ffff880037a09080 ep1in-intr [ 3.338008] usb usb4: usb_disable_device nuking non-ep0 URBs [ 3.338030] usb usb4: bus auto-suspend, wakeup 0 [ 3.338032] usb usb4: suspend_rh [ 3.338049] usb usb5: unregistering interface 5-0:1.0 [ 3.338190] uhci_hcd 0000:00:1d.1: shutdown urb ffff880037a09800 ep1in-intr [ 3.338200] usb 5-1: USB disconnect, device number 2 [ 3.338202] usb 5-1: unregistering device [ 3.338204] usb 5-1: unregistering interface 5-1:1.0 [ 3.355549] usb 5-1: usb_disable_device nuking all URBs [ 3.357702] usb 5-2: USB disconnect, device number 3 [ 3.357705] usb 5-2: unregistering device [ 3.357707] usb 5-2: unregistering interface 5-2:1.0 [ 3.357794] uhci_hcd 0000:00:1d.1: shutdown urb ffff8800bac629c0 ep1in-intr [ 3.358986] uhci_hcd 0000:00:1d.1: release dev 3 ep81-INT, period 8, phase 4, 118 us [ 3.389133] usb 5-2: unregistering interface 5-2:1.1 [ 3.389302] uhci_hcd 0000:00:1d.1: shutdown urb ffff8800bac62f00 ep2in-intr [ 3.390993] uhci_hcd 0000:00:1d.1: release dev 3 ep82-INT, period 8, phase 4, 118 us [ 3.413092] usb 5-2: usb_disable_device nuking all URBs [ 3.417998] usb usb5: usb_disable_device nuking non-ep0 URBs [ 3.418017] usb usb5: bus auto-suspend, wakeup 0 [ 3.418020] usb usb5: suspend_rh [ 3.418039] usb usb6: usb auto-resume [ 3.418041] usb usb6: wakeup_rh [ 3.438917] hub 6-0:1.0: hub_resume [ 3.438970] usb usb6: unregistering interface 6-0:1.0 [ 3.439064] uhci_hcd 0000:00:1d.2: shutdown urb ffff880037ae43c0 ep1in-intr [ 3.439162] usb usb6: usb_disable_device nuking non-ep0 URBs [ 3.439192] usb usb6: bus auto-suspend, wakeup 0 [ 3.439195] usb usb6: suspend_rh [ 3.439228] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.439366] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 3.439384] ehci-pci 0000:00:1d.7: debug port 1 [ 3.439389] ehci-pci 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 3.439392] ehci-pci 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 3.439416] ehci-pci 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 3.443300] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported [ 3.443302] ehci-pci 0000:00:1d.7: supports USB remote wakeup [ 3.443312] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7dfe000 [ 3.443316] ehci-pci 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 3.448848] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.448946] usb usb8: default language 0x0409 [ 3.448969] usb usb8: udev 1, busnum 8, minor = 896 [ 3.448971] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.448973] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.448975] usb usb8: Product: EHCI Host Controller [ 3.448977] usb usb8: Manufacturer: Linux 3.12.0-rc1+ ehci_hcd [ 3.448979] usb usb8: SerialNumber: 0000:00:1d.7 [ 3.449082] usb usb8: usb_probe_device [ 3.449085] usb usb8: configuration #1 chosen from 1 choice [ 3.449109] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 3.449147] hub 8-0:1.0: usb_probe_interface [ 3.449149] hub 8-0:1.0: usb_probe_interface - got id [ 3.449154] hub 8-0:1.0: USB hub found [ 3.449166] hub 8-0:1.0: 6 ports detected [ 3.449167] hub 8-0:1.0: standalone hub [ 3.449169] hub 8-0:1.0: no power switching (usb 1.0) [ 3.449170] hub 8-0:1.0: individual port over-current protection [ 3.449172] hub 8-0:1.0: power on to power good time: 20ms [ 3.449189] hub 8-0:1.0: local power source is good [ 3.449323] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 3.449448] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 3.449452] usb usb4: usb auto-resume [ 3.449454] usb usb4: wakeup_rh [ 3.469889] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 3.469944] hub 4-0:1.0: usb_probe_interface [ 3.469946] hub 4-0:1.0: usb_probe_interface - got id [ 3.469951] hub 4-0:1.0: USB hub found [ 3.469963] hub 4-0:1.0: 2 ports detected [ 3.469965] hub 4-0:1.0: standalone hub [ 3.469967] hub 4-0:1.0: no power switching (usb 1.0) [ 3.469968] hub 4-0:1.0: individual port over-current protection [ 3.469970] hub 4-0:1.0: power on to power good time: 2ms [ 3.469992] hub 4-0:1.0: local power source is good [ 3.470114] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 3.470218] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 3.470225] usb usb5: usb auto-resume [ 3.470229] usb usb5: wakeup_rh [ 3.470266] hub 7-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 3.470278] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.470284] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.470289] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.470300] hub 7-0:1.0: hub_suspend [ 3.470321] usb usb7: bus auto-suspend, wakeup 1 [ 3.470323] ehci-pci 0000:00:1a.7: suspend root hub [ 3.470371] hub 1-0:1.0: hub_suspend [ 3.470380] hub 2-0:1.0: hub_suspend [ 3.470400] usb usb2: bus auto-suspend, wakeup 1 [ 3.470403] usb usb2: suspend_rh [ 3.470426] usb usb1: bus auto-suspend, wakeup 1 [ 3.470428] usb usb1: suspend_rh [ 3.470451] hub 3-0:1.0: hub_suspend [ 3.470471] usb usb3: bus auto-suspend, wakeup 1 [ 3.470474] usb usb3: suspend_rh [ 3.490877] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 3.490936] hub 5-0:1.0: usb_probe_interface [ 3.490938] hub 5-0:1.0: usb_probe_interface - got id [ 3.490943] hub 5-0:1.0: USB hub found [ 3.491005] hub 5-0:1.0: 2 ports detected [ 3.491009] hub 5-0:1.0: standalone hub [ 3.491011] hub 5-0:1.0: no power switching (usb 1.0) [ 3.491012] hub 5-0:1.0: individual port over-current protection [ 3.491014] hub 5-0:1.0: power on to power good time: 2ms [ 3.491053] hub 5-0:1.0: local power source is good [ 3.491159] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 3.491394] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 3.491399] usb usb6: usb auto-resume [ 3.491402] usb usb6: wakeup_rh [ 3.511910] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 3.511960] hub 6-0:1.0: usb_probe_interface [ 3.511962] hub 6-0:1.0: usb_probe_interface - got id [ 3.511967] hub 6-0:1.0: USB hub found [ 3.512024] hub 6-0:1.0: 2 ports detected [ 3.512028] hub 6-0:1.0: standalone hub [ 3.512029] hub 6-0:1.0: no power switching (usb 1.0) [ 3.512031] hub 6-0:1.0: individual port over-current protection [ 3.512033] hub 6-0:1.0: power on to power good time: 2ms [ 3.512095] hub 6-0:1.0: local power source is good [ 3.512193] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 3.512643] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20130725/utaddress-251) [ 3.512651] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.512656] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20130725/utaddress-251) [ 3.512662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.512664] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20130725/utaddress-251) [ 3.512670] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.512672] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.549003] ehci-pci 0000:00:1d.7: GetStatus port:3 status 001403 0 ACK POWER sig=k CSC CONNECT [ 3.549014] hub 8-0:1.0: port 3: status 0501 change 0001 [ 3.549041] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001403 0 ACK POWER sig=k CSC CONNECT [ 3.549123] hub 8-0:1.0: port 4: status 0501 change 0001 [ 3.570075] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.570094] hub 4-0:1.0: hub_suspend [ 3.570116] usb usb4: bus auto-suspend, wakeup 1 [ 3.570120] usb usb4: suspend_rh [ 3.590910] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00 [ 3.590960] uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00 [ 3.612001] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.612017] hub 6-0:1.0: hub_suspend [ 3.612033] usb usb6: bus auto-suspend, wakeup 1 [ 3.612036] usb usb6: suspend_rh [ 3.648917] hub 8-0:1.0: state 7 ports 6 chg 0018 evt 0000 [ 3.648968] hub 8-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 3.648991] ehci-pci 0000:00:1d.7: port 3 low speed --> companion [ 3.676053] EXT3-fs (sda2): using internal journal [ 3.699880] ehci-pci 0000:00:1d.7: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 3.700271] hub 8-0:1.0: port 4, status 0501, change 0000, 480 Mb/s [ 3.700284] ehci-pci 0000:00:1d.7: port 4 low speed --> companion [ 3.734033] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.750997] ehci-pci 0000:00:1d.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 3.751241] hub 8-0:1.0: state 7 ports 6 chg 0000 evt 0018 [ 3.751251] ehci-pci 0000:00:1d.7: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 3.751339] hub 8-0:1.0: port 3, status 0100, change 0001, 12 Mb/s [ 3.837674] Adding 6816212k swap on /dev/sda3. Priority:-1 extents:1 across:6816212k SS [ 3.856035] hub 8-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100 [ 3.856051] ehci-pci 0000:00:1d.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 3.856158] hub 8-0:1.0: port 4, status 0100, change 0001, 12 Mb/s [ 3.960067] hub 8-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100 [ 3.960080] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006 [ 3.960091] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00 [ 3.960104] hub 8-0:1.0: hub_suspend [ 3.960123] usb usb8: bus auto-suspend, wakeup 1 [ 3.960126] ehci-pci 0000:00:1d.7: suspend root hub [ 3.960234] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 4.064163] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 4.166181] usb 5-1: new low-speed USB device number 4 using uhci_hcd [ 4.310164] usb 5-1: skipped 1 descriptor after interface [ 4.315161] usb 5-1: default language 0x0409 [ 4.331122] usb 5-1: udev 4, busnum 5, minor = 515 [ 4.331131] usb 5-1: New USB device found, idVendor=046d, idProduct=c016 [ 4.331137] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.331142] usb 5-1: Product: Optical USB Mouse [ 4.331148] usb 5-1: Manufacturer: Logitech [ 4.331677] usb 5-1: usb_probe_device [ 4.331685] usb 5-1: configuration #1 chosen from 1 choice [ 4.334140] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 4.334378] usbhid 5-1:1.0: usb_probe_interface [ 4.334383] usbhid 5-1:1.0: usb_probe_interface - got id [ 4.347929] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input14 [ 4.348538] hid-generic 0003:046D:C016.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1/input0 [ 4.348831] uhci_hcd 0000:00:1d.1: port 2 portsc 01a3,00 [ 4.348891] hub 5-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 4.452263] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 4.554209] usb 5-2: new low-speed USB device number 5 using uhci_hcd [ 4.574790] sky2 0000:06:00.0 eth7: enabling interface [ 4.574896] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready [ 4.595968] sky2 0000:05:00.0 eth8: enabling interface [ 4.596216] IPv6: ADDRCONF(NETDEV_UP): eth8: link is not ready [ 4.701209] usb 5-2: skipped 1 descriptor after interface [ 4.701215] usb 5-2: skipped 1 descriptor after interface [ 4.706252] usb 5-2: default language 0x0409 [ 4.722257] usb 5-2: udev 5, busnum 5, minor = 516 [ 4.722265] usb 5-2: New USB device found, idVendor=045e, idProduct=0750 [ 4.722272] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.722277] usb 5-2: Product: Wired Keyboard 600 [ 4.722282] usb 5-2: Manufacturer: Microsoft [ 4.722498] usb 5-2: usb_probe_device [ 4.722503] usb 5-2: configuration #1 chosen from 1 choice [ 4.725243] usb 5-2: adding 5-2:1.0 (config #1, interface 0) [ 4.725317] usbhid 5-2:1.0: usb_probe_interface [ 4.725321] usbhid 5-2:1.0: usb_probe_interface - got id [ 4.740744] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.0/input/input15 [ 4.740784] uhci_hcd 0000:00:1d.1: reserve dev 5 ep81-INT, period 8, phase 4, 118 us [ 4.740961] hid-generic 0003:045E:0750.0005: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.1-2/input0 [ 4.741039] usb 5-2: adding 5-2:1.1 (config #1, interface 1) [ 4.741108] usbhid 5-2:1.1: usb_probe_interface [ 4.741149] usbhid 5-2:1.1: usb_probe_interface - got id [ 4.773497] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.1/input/input16 [ 4.773518] uhci_hcd 0000:00:1d.1: reserve dev 5 ep82-INT, period 8, phase 4, 118 us [ 4.773642] hid-generic 0003:045E:0750.0006: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.1-2/input1 [ 4.773791] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 4.776086] usb usb8: usb auto-resume [ 4.776094] ehci-pci 0000:00:1d.7: resume root hub [ 4.797297] hub 8-0:1.0: hub_resume [ 4.797439] hub 8-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 4.797522] hub 8-0:1.0: hub_suspend [ 4.797568] usb usb8: bus auto-suspend, wakeup 1 [ 4.797572] ehci-pci 0000:00:1d.7: suspend root hub [ 4.797645] usb usb8: usb auto-resume [ 4.803239] ehci-pci 0000:00:1d.7: resume root hub [ 4.825298] hub 8-0:1.0: hub_resume [ 4.825493] hub 8-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 4.825535] hub 8-0:1.0: hub_suspend [ 4.825584] usb usb7: usb auto-resume [ 4.825593] ehci-pci 0000:00:1a.7: resume root hub [ 4.825611] usb usb8: bus auto-suspend, wakeup 1 [ 4.825616] ehci-pci 0000:00:1d.7: suspend root hub [ 4.825622] hub 7-0:1.0: hub_resume [ 4.825729] hub 7-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 4.825785] hub 7-0:1.0: hub_suspend [ 4.825855] usb usb7: bus auto-suspend, wakeup 1 [ 4.825859] ehci-pci 0000:00:1a.7: suspend root hub [ 4.831357] usb usb7: usb auto-resume [ 4.837334] ehci-pci 0000:00:1a.7: resume root hub [ 4.837363] hub 7-0:1.0: hub_resume [ 4.837495] hub 7-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 4.837549] hub 7-0:1.0: hub_suspend [ 4.837558] usb usb6: usb auto-resume [ 4.837563] usb usb6: wakeup_rh [ 4.837574] usb usb7: bus auto-suspend, wakeup 1 [ 4.837578] ehci-pci 0000:00:1a.7: suspend root hub [ 4.858326] hub 6-0:1.0: hub_resume [ 4.858423] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.858484] hub 6-0:1.0: hub_suspend [ 4.858565] usb usb6: bus auto-suspend, wakeup 1 [ 4.858571] usb usb6: suspend_rh [ 4.858668] usb usb6: usb auto-resume [ 4.858674] usb usb6: wakeup_rh [ 4.879322] hub 6-0:1.0: hub_resume [ 4.879420] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.879489] hub 6-0:1.0: hub_suspend [ 4.879519] usb usb6: bus auto-suspend, wakeup 1 [ 4.879524] usb usb6: suspend_rh [ 4.879536] usb usb4: usb auto-resume [ 4.879541] usb usb4: wakeup_rh [ 4.900338] hub 4-0:1.0: hub_resume [ 4.900469] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.900520] hub 4-0:1.0: hub_suspend [ 4.900553] usb usb4: bus auto-suspend, wakeup 1 [ 4.900558] usb usb4: suspend_rh [ 4.900647] usb usb4: usb auto-resume [ 4.900653] usb usb4: wakeup_rh [ 4.921342] hub 4-0:1.0: hub_resume [ 4.921419] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.921482] hub 4-0:1.0: hub_suspend [ 4.921524] usb usb3: usb auto-resume [ 4.921530] usb usb3: wakeup_rh [ 4.921551] usb usb4: bus auto-suspend, wakeup 1 [ 4.921556] usb usb4: suspend_rh [ 4.943308] hub 3-0:1.0: hub_resume [ 4.943427] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.943554] hub 3-0:1.0: hub_suspend [ 4.943580] usb usb3: bus auto-suspend, wakeup 1 [ 4.943585] usb usb3: suspend_rh [ 4.943624] usb usb3: usb auto-resume [ 4.943629] usb usb3: wakeup_rh [ 4.964321] hub 3-0:1.0: hub_resume [ 4.964447] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.964498] hub 3-0:1.0: hub_suspend [ 4.964538] usb usb2: usb auto-resume [ 4.964545] usb usb2: wakeup_rh [ 4.964569] usb usb3: bus auto-suspend, wakeup 1 [ 4.964574] usb usb3: suspend_rh [ 4.985340] hub 2-0:1.0: hub_resume [ 4.985494] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.985590] hub 2-0:1.0: hub_suspend [ 4.985660] usb usb2: bus auto-suspend, wakeup 1 [ 4.985665] usb usb2: suspend_rh [ 4.985707] usb usb2: usb auto-resume [ 4.985715] usb usb2: wakeup_rh [ 5.006405] hub 2-0:1.0: hub_resume [ 5.006558] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.006619] hub 2-0:1.0: hub_suspend [ 5.006648] usb usb2: bus auto-suspend, wakeup 1 [ 5.006655] usb usb2: suspend_rh [ 5.006716] usb usb2: usb auto-resume [ 5.006721] usb usb2: wakeup_rh [ 5.006743] usb usb1: usb auto-resume [ 5.006748] usb usb1: wakeup_rh [ 5.027419] hub 1-0:1.0: hub_resume [ 5.027436] hub 2-0:1.0: hub_resume [ 5.027574] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.027607] hub 1-0:1.0: hub_suspend [ 5.027672] usb usb1: bus auto-suspend, wakeup 1 [ 5.027676] usb usb1: suspend_rh [ 5.027696] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.027729] usb usb1: usb auto-resume [ 5.027733] hub 2-0:1.0: hub_suspend [ 5.027734] usb usb1: wakeup_rh [ 5.027768] usb usb2: bus auto-suspend, wakeup 1 [ 5.027772] usb usb2: suspend_rh [ 5.048477] hub 1-0:1.0: hub_resume [ 5.048628] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.048843] hub 1-0:1.0: hub_suspend [ 5.048868] usb usb1: bus auto-suspend, wakeup 1 [ 5.048873] usb usb1: suspend_rh [ 5.049010] usb usb1: usb auto-resume [ 5.049017] usb usb1: wakeup_rh [ 5.069383] hub 1-0:1.0: hub_resume [ 5.069571] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 5.069593] hub 1-0:1.0: hub_suspend [ 5.069615] usb usb1: bus auto-suspend, wakeup 1 [ 5.069619] usb usb1: suspend_rh [ 5.836056] sshd (3021): /proc/3021/oom_adj is deprecated, please use /proc/3021/oom_score_adj instead. [ 5.956305] uhci_hcd 0000:00:1d.1: reserve dev 4 ep81-INT, period 8, phase 4, 93 us [ 5.995648] uhci_hcd 0000:00:1d.1: release dev 4 ep81-INT, period 8, phase 4, 93 us [ 6.301860] sky2 0000:06:00.0 eth7: Link is up at 100 Mbps, full duplex, flow control both [ 6.301891] IPv6: ADDRCONF(NETDEV_CHANGE): eth7: link becomes ready [ 6.957185] uhci_hcd 0000:00:1d.1: reserve dev 4 ep81-INT, period 8, phase 4, 93 us [ 7.922348] fuse init (API version 7.22)