[PATCH 8/8][v4] powerpc/perf: Export Power7 memory hierarchy info to user space.

From: Sukadev Bhattiprolu
Date: Fri Sep 13 2013 - 20:49:57 EST


On Power7, the DCACHE_SRC field in MMCRA register identifies the memory
hierarchy level (eg: L2, L3 etc) from which a data-cache miss for a
marked instruction was satisfied.

Use the 'perf_mem_data_src' object to export this hierarchy level to user
space. Some memory hierarchy levels in Power7 don't map into the arch-neutral
levels. However, since newer generation of the processor (i.e. Power8) uses
fewer levels than in Power7, we don't really need to define new hierarchy
levels just for Power7.

We instead, map as many levels as possible and approximate the rest. See
comments near dcache-src_map[] in the patch.

Usage:

perf record -d -e 'cpu/PM_MRK_GRP_CMPL/' <application>
perf report -n --mem-mode --sort=mem,sym,dso,symbol_daddr,dso_daddr"

For samples involving load/store instructions, the memory
hierarchy level is shown as "L1 hit", "Remote RAM hit" etc.
# or

perf record --data <application>
perf report -D

Sample records contain a 'data_src' field which encodes the
memory hierarchy level: Eg: data_src 0x442 indicates
MEM_OP_LOAD, MEM_LVL_HIT, MEM_LVL_L2 (i.e load hit L2).

Note that the PMU event PM_MRK_GRP_CMPL tracks all marked group completions
events. While some of these are loads and stores, others like 'add'
instructions may also be sampled.

As such, the precise semantics of 'perf mem -t load' or 'perf mem -t store'
(which require sampling only loads or only stores cannot be implemented on
Power. (Sampling on PM_MRK_GRP_CMPL and throwing away non-loads and non-store
samples could yield an inconsistent profile of the application).

Thanks to input from Stephane Eranian, Michael Ellerman and Michael Neuling.

Cc: Stephane Eranian <eranian@xxxxxxxxxx>
Cc: Michael Ellerman <michael@xxxxxxxxxxxxxx>
Signed-off-by: Sukadev Bhattiprolu <sukadev@xxxxxxxxxxxxxxxxxx>
---
Changelog[v4]:
Drop support for 'perf mem' for Power (use perf-record and perf-report
directly)

Changelog[v3]:
[Michael Ellerman] If newer levels that we defined in [v2] are not
needed for Power8, ignore the new levels for Power7 also, and
approximate them.
Separate the TLB level mapping to a separate patchset.

Changelog[v2]:
[Stephane Eranian] Define new levels rather than ORing the L2 and L3
with REM_CCE1 and REM_CCE2.
[Stephane Eranian] allocate a bit PERF_MEM_XLVL_NA for architectures
that don't use the ->mem_xlvl field.
Insert the TLB patch ahead so the new TLB bits are contigous with
existing TLB bits.

arch/powerpc/perf/power7-pmu.c | 94 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 94 insertions(+)

diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index 56c67bc..ddfa548 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -11,8 +11,10 @@
#include <linux/kernel.h>
#include <linux/perf_event.h>
#include <linux/string.h>
+#include <linux/uaccess.h>
#include <asm/reg.h>
#include <asm/cputable.h>
+#include <asm/code-patching.h>

/*
* Bits in event code for POWER7
@@ -317,6 +319,97 @@ static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[])
mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SH(pmc));
}

+#define POWER7_MMCRA_DCACHE_MISS (0x1LL << 55)
+#define POWER7_MMCRA_DCACHE_SRC_SHIFT 51
+#define POWER7_MMCRA_DCACHE_SRC_MASK (0xFLL << POWER7_MMCRA_DCACHE_SRC_SHIFT)
+
+#define P(a, b) PERF_MEM_S(a, b)
+#define PLH(a, b) (P(OP, LOAD) | P(LVL, HIT) | P(a, b))
+/*
+ * Map the Power7 DCACHE_SRC field (bits 9..12) in MMCRA register to the
+ * architecture-neutral memory hierarchy levels. For the levels in Power7
+ * that don't map to the arch-neutral levels, approximate to nearest
+ * level.
+ *
+ * 1-hop: indicates another core on the same chip (2.1 and 3.1 levels).
+ * 2-hops: indicates a different chip on same or different node (remote
+ * and distant levels).
+ *
+ * For consistency with this interpretation of the hops, we dont use
+ * the REM_RAM1 level below.
+ *
+ * The *SHR and *MOD states of the cache are ignored/not exported to user.
+ *
+ * ### Levels marked with ### in comments below are approximated
+ */
+static u64 dcache_src_map[] = {
+ PLH(LVL, L2), /* 00: FROM_L2 */
+ PLH(LVL, L3), /* 01: FROM_L3 */
+
+ P(LVL, NA), /* 02: Reserved */
+ P(LVL, NA), /* 03: Reserved */
+
+ PLH(LVL, REM_CCE1), /* 04: FROM_L2.1_SHR ### */
+ PLH(LVL, REM_CCE1), /* 05: FROM_L2.1_MOD ### */
+
+ PLH(LVL, REM_CCE1), /* 06: FROM_L3.1_SHR ### */
+ PLH(LVL, REM_CCE1), /* 07: FROM_L3.1_MOD ### */
+
+ PLH(LVL, REM_CCE2), /* 08: FROM_RL2L3_SHR ### */
+ PLH(LVL, REM_CCE2), /* 09: FROM_RL2L3_MOD ### */
+
+ PLH(LVL, REM_CCE2), /* 10: FROM_DL2L3_SHR ### */
+ PLH(LVL, REM_CCE2), /* 11: FROM_DL2L3_MOD ### */
+
+ PLH(LVL, LOC_RAM), /* 12: FROM_LMEM */
+ PLH(LVL, REM_RAM2), /* 13: FROM_RMEM ### */
+ PLH(LVL, REM_RAM2), /* 14: FROM_DMEM */
+
+ P(LVL, NA), /* 15: Reserved */
+};
+
+/*
+ * Determine the memory-hierarchy information (if applicable) for the
+ * instruction/address we are sampling. If we encountered a DCACHE_MISS,
+ * mmcra[DCACHE_SRC_MASK] specifies the memory level from which the operand
+ * was loaded.
+ *
+ * Otherwise, it is an L1-hit, provided the instruction was a load/store.
+ */
+static void power7_get_mem_data_src(union perf_mem_data_src *dsrc,
+ struct pt_regs *regs)
+{
+ u64 idx;
+ u64 mmcra = regs->dsisr;
+ u64 addr;
+ int ret;
+ unsigned int instr;
+
+ if (mmcra & POWER7_MMCRA_DCACHE_MISS) {
+ idx = mmcra & POWER7_MMCRA_DCACHE_SRC_MASK;
+ idx >>= POWER7_MMCRA_DCACHE_SRC_SHIFT;
+
+ dsrc->val |= dcache_src_map[idx];
+ return;
+ }
+
+ instr = 0;
+ addr = perf_instruction_pointer(regs);
+
+ if (is_kernel_addr(addr))
+ instr = *(unsigned int *)addr;
+ else {
+ pagefault_disable();
+ ret = __get_user_inatomic(instr, (unsigned int __user *)addr);
+ pagefault_enable();
+ if (ret)
+ instr = 0;
+ }
+ if (instr && instr_is_load_store(&instr))
+ dsrc->val |= PLH(LVL, L1);
+}
+
+
static int power7_generic_events[] = {
[PERF_COUNT_HW_CPU_CYCLES] = PME_PM_CYC,
[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = PME_PM_GCT_NOSLOT_CYC,
@@ -437,6 +530,7 @@ static struct power_pmu power7_pmu = {
.get_constraint = power7_get_constraint,
.get_alternatives = power7_get_alternatives,
.disable_pmc = power7_disable_pmc,
+ .get_mem_data_src = power7_get_mem_data_src,
.flags = PPMU_ALT_SIPR,
.attr_groups = power7_pmu_attr_groups,
.n_generic = ARRAY_SIZE(power7_generic_events),
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/