Re: [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices

From: Kevin Hilman
Date: Thu Sep 12 2013 - 17:34:30 EST


Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> writes:

> From: Aaron Lu <aaron.lu@xxxxxxxxx>
>
> This patch adds runtime PM support for the I2C bus in a similar way that
> has been done for PCI bus already. This means that the I2C bus core
> prepares runtime PM for a client device just before a driver is about to be
> bound to it. Devices that are not bound to any driver are not prepared for
> runtime PM.
>
> In order to take advantage of this runtime PM support, the client device
> driver needs drop the device runtime PM reference count by calling
> pm_runtime_put() in its ->probe() callback and possibly implement rest of
> the runtime PM callbacks.
>
> If the driver doesn't support runtime PM (like most of the existing I2C
> client drivers), the device in question is regarded as being runtime PM
> active and powered on.

But for existing drivers which already support runtime PM (at least 7 by
a quick grep), they will be stuck runtime enabled and stop hitting
low-power states after this patch.

> The patch adds also runtime PM support for the adapter device because it is
> needed to be able to runtime power manage the I2C controller device. The
> adapter device is handled along with the I2C controller device (it uses
> pm_runtime_no_callbacks()).
>
> Signed-off-by: Aaron Lu <aaron.lu@xxxxxxxxx>
> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> ---
> drivers/i2c/i2c-core.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 43 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index f32ca29..44374b4 100644
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -248,11 +248,30 @@ static int i2c_device_probe(struct device *dev)
> client->flags & I2C_CLIENT_WAKE);
> dev_dbg(dev, "probe\n");
>
> + /* Make sure the adapter is active */
> + pm_runtime_get_sync(&client->adapter->dev);
> +
> + /*
> + * Enable runtime PM for the client device. If the client wants to
> + * participate on runtime PM it should call pm_runtime_put() in its
> + * probe() callback.
> + */
> + pm_runtime_get_noresume(&client->dev);
> + pm_runtime_set_active(&client->dev);

Why the set_active here?

For hardware that is disabled/powered-off on startup, there will now be
a mismatch between the hardware state an the RPM core state.

Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/