[PATCH 2/3] ACPI/EC: Convert all printk to dynamic debug function
From: tianyu . lan
Date: Thu Sep 12 2013 - 03:34:23 EST
From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
This patch is to convert all printks in the ec driver to pr_debug/info/err
and define pr_fmt macro to replace PREFIX.
Signed-off-by: Lan Tianyu <tianyu.lan@xxxxxxxxx>
---
drivers/acpi/ec.c | 49 ++++++++++++++++++++++++-------------------------
1 file changed, 24 insertions(+), 25 deletions(-)
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index a06d983..d5309fd 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -28,6 +28,7 @@
/* Uncomment next line to get verbose printout */
/* #define DEBUG */
+#define pr_fmt(fmt) "ACPI : EC: " fmt
#include <linux/kernel.h>
#include <linux/module.h>
@@ -49,9 +50,6 @@
#define ACPI_EC_DEVICE_NAME "Embedded Controller"
#define ACPI_EC_FILE_INFO "info"
-#undef PREFIX
-#define PREFIX "ACPI: EC: "
-
/* EC status register */
#define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
#define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
@@ -131,26 +129,26 @@ static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */
static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
{
u8 x = inb(ec->command_addr);
- pr_debug(PREFIX "---> status = 0x%2.2x\n", x);
+ pr_debug("---> status = 0x%2.2x\n", x);
return x;
}
static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
{
u8 x = inb(ec->data_addr);
- pr_debug(PREFIX "---> data = 0x%2.2x\n", x);
+ pr_debug("---> data = 0x%2.2x\n", x);
return x;
}
static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
{
- pr_debug(PREFIX "<--- command = 0x%2.2x\n", command);
+ pr_debug("<--- command = 0x%2.2x\n", command);
outb(command, ec->command_addr);
}
static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data)
{
- pr_debug(PREFIX "<--- data = 0x%2.2x\n", data);
+ pr_debug("<--- data = 0x%2.2x\n", data);
outb(data, ec->data_addr);
}
@@ -241,7 +239,7 @@ static int ec_poll(struct acpi_ec *ec)
}
advance_transaction(ec, acpi_ec_read_status(ec));
} while (time_before(jiffies, delay));
- pr_debug(PREFIX "controller reset, restart transaction\n");
+ pr_debug("controller reset, restart transaction\n");
spin_lock_irqsave(&ec->lock, flags);
start_transaction(ec);
spin_unlock_irqrestore(&ec->lock, flags);
@@ -309,12 +307,12 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
}
}
if (ec_wait_ibf0(ec)) {
- pr_err(PREFIX "input buffer is not empty, "
+ pr_err("input buffer is not empty, "
"aborting transaction\n");
status = -ETIME;
goto end;
}
- pr_debug(PREFIX "transaction start (cmd=0x%02x, addr=0x%02x)\n",
+ pr_debug("transaction start (cmd=0x%02x, addr=0x%02x)\n",
t->command, t->wdata ? t->wdata[0] : 0);
/* disable GPE during transaction if storm is detected */
if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
@@ -331,12 +329,12 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
/* It is safe to enable the GPE outside of the transaction. */
acpi_enable_gpe(NULL, ec->gpe);
} else if (t->irq_count > ec_storm_threshold) {
- pr_info(PREFIX "GPE storm detected(%d GPEs), "
+ pr_info("GPE storm detected(%d GPEs), "
"transactions will use polling mode\n",
t->irq_count);
set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
}
- pr_debug(PREFIX "transaction end\n");
+ pr_debug("transaction end\n");
end:
if (ec->global_lock)
acpi_release_global_lock(glk);
@@ -570,12 +568,12 @@ static void acpi_ec_run(void *cxt)
struct acpi_ec_query_handler *handler = cxt;
if (!handler)
return;
- pr_debug(PREFIX "start query execution\n");
+ pr_debug("start query execution\n");
if (handler->func)
handler->func(handler->data);
else if (handler->handle)
acpi_evaluate_object(handler->handle, NULL, NULL, NULL);
- pr_debug(PREFIX "stop query execution\n");
+ pr_debug("stop query execution\n");
kfree(handler);
}
@@ -593,7 +591,8 @@ static int acpi_ec_sync_query(struct acpi_ec *ec)
if (!copy)
return -ENOMEM;
memcpy(copy, handler, sizeof(*copy));
- pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value);
+ pr_debug("push query execution (0x%2x) on queue\n",
+ value);
return acpi_os_execute((copy->func) ?
OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER,
acpi_ec_run, copy);
@@ -616,7 +615,7 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state)
{
if (state & ACPI_EC_FLAG_SCI) {
if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) {
- pr_debug(PREFIX "push gpe query to the queue\n");
+ pr_debug("push gpe query to the queue\n");
return acpi_os_execute(OSL_NOTIFY_HANDLER,
acpi_ec_gpe_query, ec);
}
@@ -630,7 +629,7 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device,
struct acpi_ec *ec = data;
u8 status = acpi_ec_read_status(ec);
- pr_debug(PREFIX "~~~> interrupt, status:0x%02x\n", status);
+ pr_debug("~~~> interrupt, status:0x%02x\n", status);
advance_transaction(ec, status);
if (ec_transaction_done(ec) &&
@@ -776,7 +775,7 @@ static int ec_install_handlers(struct acpi_ec *ec)
* The AE_NOT_FOUND error will be ignored and OS
* continue to initialize EC.
*/
- printk(KERN_ERR "Fail in evaluating the _REG object"
+ pr_err("Fail in evaluating the _REG object"
" of EC device. Broken bios is suspected.\n");
} else {
acpi_remove_gpe_handler(NULL, ec->gpe,
@@ -795,10 +794,10 @@ static void ec_remove_handlers(struct acpi_ec *ec)
acpi_disable_gpe(NULL, ec->gpe);
if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
- pr_err(PREFIX "failed to remove space handler\n");
+ pr_err("failed to remove space handler\n");
if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
&acpi_ec_gpe_handler)))
- pr_err(PREFIX "failed to remove gpe handler\n");
+ pr_err("failed to remove gpe handler\n");
clear_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags);
}
@@ -840,7 +839,7 @@ static int acpi_ec_add(struct acpi_device *device)
ret = !!request_region(ec->command_addr, 1, "EC cmd");
WARN(!ret, "Could not request EC cmd io port 0x%lx", ec->command_addr);
- pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
+ pr_info("GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
ec->gpe, ec->command_addr, ec->data_addr);
ret = ec_install_handlers(ec);
@@ -931,7 +930,7 @@ static int ec_validate_ecdt(const struct dmi_system_id *id)
/* MSI EC needs special treatment, enable it */
static int ec_flag_msi(const struct dmi_system_id *id)
{
- printk(KERN_DEBUG PREFIX "Detected MSI hardware, enabling workarounds.\n");
+ pr_debug("Detected MSI hardware, enabling workarounds.\n");
EC_FLAGS_MSI = 1;
EC_FLAGS_VALIDATE_ECDT = 1;
return 0;
@@ -1010,7 +1009,7 @@ int __init acpi_ec_ecdt_probe(void)
status = acpi_get_table(ACPI_SIG_ECDT, 1,
(struct acpi_table_header **)&ecdt_ptr);
if (ACPI_SUCCESS(status)) {
- pr_info(PREFIX "EC description table is found, configuring boot EC\n");
+ pr_info("EC description table is found, configuring boot EC\n");
boot_ec->command_addr = ecdt_ptr->control.address;
boot_ec->data_addr = ecdt_ptr->data.address;
boot_ec->gpe = ecdt_ptr->gpe;
@@ -1030,7 +1029,7 @@ int __init acpi_ec_ecdt_probe(void)
/* This workaround is needed only on some broken machines,
* which require early EC, but fail to provide ECDT */
- printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
+ pr_debug("Look up EC in DSDT\n");
status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device,
boot_ec, NULL);
/* Check that acpi_get_devices actually find something */
@@ -1042,7 +1041,7 @@ int __init acpi_ec_ecdt_probe(void)
saved_ec->data_addr != boot_ec->data_addr ||
saved_ec->gpe != boot_ec->gpe ||
saved_ec->handle != boot_ec->handle)
- pr_info(PREFIX "ASUSTek keeps feeding us with broken "
+ pr_info("ASUSTek keeps feeding us with broken "
"ECDT tables, which are very hard to workaround. "
"Trying to use DSDT EC info instead. Please send "
"output of acpidump to linux-acpi@xxxxxxxxxxxxxxx\n");
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/