Re: "cpufreq: fix serialization issues with freq change notifiers"breaks cpufreq too

[Guennadi Liakhovetski]

On Tue, 10 Sep 2013, Viresh Kumar wrote:

> On 10 September 2013 20:42, Guennadi Liakhovetski <g.liakhovetski@xxxxxx> wrote:
> > 4. reverted that commit, resolving a trivial conflict. Added a debug
> > output in __cpufreq_driver_target() of
> >
> >
> >         if (cpufreq_disabled())
> >                 return -ENODEV;
> > +       pr_info("%s() %d\n", __func__, policy->transition_ongoing);
> >         if (policy->transition_ongoing)
> >                 return -EBUSY;
> 
> Are you sure this diff is on linux-next and not after the revert that
> you mentioned later in the mail? There is some locking introduced
> by my patch which I can't see in you diff..

Of course, isn't that what I've written above? reverted a commit and added 
debug - in that order.

> > Built and booted, got
> >
> > cpufreq: __cpufreq_driver_target(): 1
> >
> > printed out 4 times from the beginning.
> >
> > 5. tried
> >
> > echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
> >
> > the above output appeared 2 more times - no frequency change resulted.
> >
> > 6. reverted commit dceff5ce18801dddc220d6238628619c93bc3cb6, built booted
> > - cpufreq works again.
> >
> >> I am afraid you need to give us some more information on how it broke
> >> your stuff.. :)
> >
> > Hope the above is enough.
> 
> A bit more would be helpful.. Can you add these debug prints to all the places
> where transition_ongoing is getting modified? with %s, __func__ to distinguish
> them better? That will make it a bit easy for me...

Sure, I can... So, with the performance governor I get

[    1.290000] cpufreq-cpu0 cpufreq-cpu0: Looking up cpu0-supply from device tree
[    1.290000] cpufreq: trying to register driver generic_cpu0
[    1.290000] cpufreq: adding CPU 0
[    1.290000] cpufreq: Adding link for CPU: 1
[    1.290000] cpufreq: setting new policy for CPU 0: 398667 - 1196000 kHz
[    1.290000] cpufreq: new min and max freqs are 398667 - 1196000 kHz
[    1.290000] cpufreq: governor switch
[    1.290000] cpufreq: __cpufreq_governor for CPU 0, event 4
[    1.290000] cpufreq: __cpufreq_governor for CPU 0, event 1
[    1.290000] cpufreq_performance: setting to 1196000 kHz because of event 1
[    1.290000] cpufreq: __cpufreq_driver_target().1665 1

This is my debug - .transition_ongoing is incremented ^^^^^^^^

[    1.300000] cpufreq: target for CPU 0: 1196000 kHz, relation 1, requested 1196000 kHz
[    1.300000] cpufreq: governor: change or update limits
[    1.300000] cpufreq: __cpufreq_governor for CPU 0, event 3
[    1.300000] cpufreq_performance: setting to 1196000 kHz because of event 3
[    1.300000] cpufreq: initialization complete
[    1.300000] cpufreq: adding CPU 1
[    1.300000] cpufreq: driver generic_cpu0 up and running

That's it. It never gets decremented again.

> Also, what's the configuration of your system? How many CPUs?

2 CPU cores.

> And are all of them sharing clock? (I believe yes, as you are using cpufreq-cpu0)..

Correct. Debug diff is below.

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index ecc55d1..374e030 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -15,6 +15,8 @@
  * published by the Free Software Foundation.
  */
 
+#define DEBUG
+
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/cpu.h>
@@ -292,6 +294,7 @@ static void __cpufreq_notify_transition(struct cpufreq_policy *policy,
 
 		policy->transition_ongoing++;
 		write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+		pr_info("%s().%d %d\n", __func__, __LINE__, policy->transition_ongoing);
 
 		/* detect if the driver reported a value as "old frequency"
 		 * which is not equal to what the cpufreq core thinks is
@@ -321,6 +324,7 @@ static void __cpufreq_notify_transition(struct cpufreq_policy *policy,
 
 		policy->transition_ongoing--;
 		write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+		pr_info("%s().%d %d\n", __func__, __LINE__, policy->transition_ongoing);
 
 		adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
 		pr_debug("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new,
@@ -359,6 +363,7 @@ void cpufreq_notify_transition(struct cpufreq_policy *policy,
 		write_lock_irqsave(&cpufreq_driver_lock, flags);
 		policy->transition_ongoing--;
 		write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+		pr_info("%s().%d %d\n", __func__, __LINE__, policy->transition_ongoing);
 	}
 }
 EXPORT_SYMBOL_GPL(cpufreq_notify_transition);
@@ -1356,6 +1361,7 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
 	}
 	policy->transition_ongoing++;
 	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+	pr_info("%s().%d %d\n", __func__, __LINE__, policy->transition_ongoing);
 
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
@@ -1656,6 +1662,7 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 	}
 	policy->transition_ongoing++;
 	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+	pr_info("%s().%d %d\n", __func__, __LINE__, policy->transition_ongoing);
 
 	/* Make sure that target_freq is within supported range */
 	if (target_freq > policy->max)
diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
index cf117de..5575b08 100644
--- a/drivers/cpufreq/cpufreq_performance.c
+++ b/drivers/cpufreq/cpufreq_performance.c
@@ -10,6 +10,8 @@
  *
  */
 
+#define DEBUG
+
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/cpufreq.h>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/