[GIT PULL] x86/mm changes for v3.12
From: Ingo Molnar
Date: Tue Sep 03 2013 - 14:31:08 EST
Linus,
Please pull the latest x86-mm-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-mm-for-linus
HEAD: 30e46b574a1db7d14404e52dca8e1aa5f5155fd2 x86: avoid remapping data in parse_setup_data()
Misc smaller fixes:
- a parse_setup_data() boot crash fix
- a memblock and an __early_ioremap cleanup
- turn the always-on CONFIG_ARCH_MEMORY_PROBE=y into a configurable
option and turn it off - it's an unrobust debug facility, it shouldn't
be enabled by default.
Thanks,
Ingo
------------------>
Jianguo Wu (1):
mm: Remove unused variable idx0 in __early_ioremap()
Linn Crosetto (1):
x86: avoid remapping data in parse_setup_data()
Tang Chen (1):
x86: Use memblock_set_current_limit() to set limit for memblock.
Toshi Kani (1):
mm/hotplug, x86: Disable ARCH_MEMORY_PROBE by default
Documentation/memory-hotplug.txt | 16 +++++++++-------
arch/x86/Kconfig | 6 +++++-
arch/x86/include/asm/e820.h | 2 +-
arch/x86/kernel/e820.c | 5 ++++-
arch/x86/kernel/setup.c | 23 ++++++++++-------------
arch/x86/mm/ioremap.c | 5 ++---
6 files changed, 31 insertions(+), 26 deletions(-)
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index 8e5eacb..8fd254c 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -210,13 +210,15 @@ If memory device is found, memory hotplug code will be called.
4.2 Notify memory hot-add event by hand
------------
-In some environments, especially virtualized environment, firmware will not
-notify memory hotplug event to the kernel. For such environment, "probe"
-interface is supported. This interface depends on CONFIG_ARCH_MEMORY_PROBE.
-
-Now, CONFIG_ARCH_MEMORY_PROBE is supported only by powerpc but it does not
-contain highly architecture codes. Please add config if you need "probe"
-interface.
+On powerpc, the firmware does not notify a memory hotplug event to the kernel.
+Therefore, "probe" interface is supported to notify the event to the kernel.
+This interface depends on CONFIG_ARCH_MEMORY_PROBE.
+
+CONFIG_ARCH_MEMORY_PROBE is supported on powerpc only. On x86, this config
+option is disabled by default since ACPI notifies a memory hotplug event to
+the kernel, which performs its hotplug operation as the result. Please
+enable this option if you need the "probe" interface for testing purposes
+on x86.
Probe interface is located at
/sys/devices/system/memory/probe
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b32ebf9..2f9d957 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1344,8 +1344,12 @@ config ARCH_SELECT_MEMORY_MODEL
depends on ARCH_SPARSEMEM_ENABLE
config ARCH_MEMORY_PROBE
- def_bool y
+ bool "Enable sysfs memory/probe interface"
depends on X86_64 && MEMORY_HOTPLUG
+ help
+ This option enables a sysfs memory/probe interface for testing.
+ See Documentation/memory-hotplug.txt for more information.
+ If you are unsure how to answer this question, answer N.
config ARCH_PROC_KCORE_TEXT
def_bool y
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index cccd07f..779c2ef 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -29,7 +29,7 @@ extern void e820_setup_gap(void);
extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
unsigned long start_addr, unsigned long long end_addr);
struct setup_data;
-extern void parse_e820_ext(struct setup_data *data);
+extern void parse_e820_ext(u64 phys_addr, u32 data_len);
#if defined(CONFIG_X86_64) || \
(defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index d32abea..174da5f 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -658,15 +658,18 @@ __init void e820_setup_gap(void)
* boot_params.e820_map, others are passed via SETUP_E820_EXT node of
* linked list of struct setup_data, which is parsed here.
*/
-void __init parse_e820_ext(struct setup_data *sdata)
+void __init parse_e820_ext(u64 phys_addr, u32 data_len)
{
int entries;
struct e820entry *extmap;
+ struct setup_data *sdata;
+ sdata = early_memremap(phys_addr, data_len);
entries = sdata->len / sizeof(struct e820entry);
extmap = (struct e820entry *)(sdata->data);
__append_e820_map(extmap, entries);
sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+ early_iounmap(sdata, data_len);
printk(KERN_INFO "e820: extended physical RAM map:\n");
e820_print_map("extended");
}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f8ec578..b6b45e4 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -426,25 +426,23 @@ static void __init reserve_initrd(void)
static void __init parse_setup_data(void)
{
struct setup_data *data;
- u64 pa_data;
+ u64 pa_data, pa_next;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
- u32 data_len, map_len;
+ u32 data_len, map_len, data_type;
map_len = max(PAGE_SIZE - (pa_data & ~PAGE_MASK),
(u64)sizeof(struct setup_data));
data = early_memremap(pa_data, map_len);
data_len = data->len + sizeof(struct setup_data);
- if (data_len > map_len) {
- early_iounmap(data, map_len);
- data = early_memremap(pa_data, data_len);
- map_len = data_len;
- }
+ data_type = data->type;
+ pa_next = data->next;
+ early_iounmap(data, map_len);
- switch (data->type) {
+ switch (data_type) {
case SETUP_E820_EXT:
- parse_e820_ext(data);
+ parse_e820_ext(pa_data, data_len);
break;
case SETUP_DTB:
add_dtb(pa_data);
@@ -452,8 +450,7 @@ static void __init parse_setup_data(void)
default:
break;
}
- pa_data = data->next;
- early_iounmap(data, map_len);
+ pa_data = pa_next;
}
}
@@ -1070,7 +1067,7 @@ void __init setup_arch(char **cmdline_p)
cleanup_highmap();
- memblock.current_limit = ISA_END_ADDRESS;
+ memblock_set_current_limit(ISA_END_ADDRESS);
memblock_x86_fill();
/*
@@ -1103,7 +1100,7 @@ void __init setup_arch(char **cmdline_p)
setup_real_mode();
- memblock.current_limit = get_max_mapped();
+ memblock_set_current_limit(get_max_mapped());
dma_contiguous_reserve(0);
/*
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 0215e2c..799580c 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -487,7 +487,7 @@ __early_ioremap(resource_size_t phys_addr, unsigned long size, pgprot_t prot)
unsigned long offset;
resource_size_t last_addr;
unsigned int nrpages;
- enum fixed_addresses idx0, idx;
+ enum fixed_addresses idx;
int i, slot;
WARN_ON(system_state != SYSTEM_BOOTING);
@@ -540,8 +540,7 @@ __early_ioremap(resource_size_t phys_addr, unsigned long size, pgprot_t prot)
/*
* Ok, go for it..
*/
- idx0 = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot;
- idx = idx0;
+ idx = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot;
while (nrpages > 0) {
early_set_fixmap(idx, phys_addr, prot);
phys_addr += PAGE_SIZE;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/