Re: [PATCH v3] gpio: interrupt consistency check for OF GPIO IRQs

From: Stephen Warren
Date: Tue Sep 03 2013 - 13:32:42 EST


On 09/03/2013 06:43 AM, Linus Walleij wrote:
> On Fri, Aug 30, 2013 at 9:55 PM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote:
>> On 08/29/2013 06:24 PM, Javier Martinez Canillas wrote:
>> ...
>>> We have been trying to solve this issue for a few months by now and Linus'
>>> approach seems to be the most sensible solution to me.
>>>
>>> Drivers that request an IRQ and assume that platform code will request and setup
>>> the GPIO have been broken since the boards using these drivers were migrated to
>>> DT (e.g: smsc911x on OMAP2+ boards).
>>
>> That's only true if the driver for the GPIO controller is buggy.
>> Whatever request_irq() maps down to in the GPIO/IRQ controller driver
>> simply needs to set up the pin as an interrupt input, then it doesn't
>> matter which order the driver does things.
>
> As mentioned it can't do that, because doing that creates a
> restriction on which order the driver does things...

I am not convinced here. Which driver (GPIO/IRQ controller driver, or
the driver which uses GPIOs/IRQs?) Which operations?

> But you mentioned that you wanted an API that would account
> for the case where the *same driver* requested the same resource
> (a GPIO line) to be used for both IRQ and GPIO, through two
> different calls.
>
> I would be happy to see how we could do that, preferably in a
> generic way.
>
> Since the gpio_request() does not contain the signature of the
> calling driver I don't see how we could do this without refactoring
> the whole world.
>
> In that case it would probably be easiest to
> *first* proceed to complete Alexandre's suggested refactorings for
> GPIO descriptors, which tie down GPIOs to be requested like
> clocks and regulators and thus tied to a device, so we can from
> there proceed to implement such a conditional request,
> as we will then have the required information in the GPIO
> subsystem.

Indeed, that does seem necessary if you want the GPIO/IRQ core to be
able to implement this feature.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/