[RESEND RFC PATCH v3 00/35] mm: Memory Power Management

From: Srivatsa S. Bhat
Date: Fri Aug 30 2013 - 09:18:11 EST


[ Resending, since some of the patches didn't go through successfully
the last time around. ]

Overview of Memory Power Management and its implications to the Linux MM
========================================================================

Today, we are increasingly seeing computer systems sporting larger and larger
amounts of RAM, in order to meet workload demands. However, memory consumes a
significant amount of power, potentially upto more than a third of total system
power on server systems[4]. So naturally, memory becomes the next big target
for power management - on embedded systems and smartphones, and all the way
upto large server systems.

Power-management capabilities in modern memory hardware:
-------------------------------------------------------

Modern memory hardware such as DDR3 support a number of power management
capabilities - for instance, the memory controller can automatically put
memory DIMMs/banks into content-preserving low-power states, if it detects
that the *entire* memory DIMM/bank has not been referenced for a threshold
amount of time, thus reducing the energy consumption of the memory hardware.
We term these power-manageable chunks of memory as "Memory Regions".

Exporting memory region info from the platform to the OS:
--------------------------------------------------------

The OS needs to know about the granularity at which the hardware can perform
automatic power-management of the memory banks (i.e., the address boundaries
of the memory regions). On ARM platforms, the bootloader can be modified to
pass on this info to the kernel via the device-tree. On x86 platforms, the
new ACPI 5.0 spec has added support for exporting the power-management
capabilities of the memory hardware to the OS in a standard way[5][6].

Estimate of power-savings from power-aware Linux MM:
---------------------------------------------------

Once the firmware/bootloader exports the required info to the OS, it is upto
the kernel's MM subsystem to make the best use of these capabilities and manage
memory power-efficiently. It had been demonstrated on a Samsung Exynos board
(with 2 GB RAM) that upto 6 percent of total system power can be saved by
making the Linux kernel MM subsystem power-aware[3]. (More savings can be
expected on systems with larger amounts of memory, and perhaps improved further
using better MM designs).


Role of the Linux MM in enhancing memory power savings:
------------------------------------------------------

Often, this simply translates to having the Linux MM understand the granularity
at which RAM modules can be power-managed, and keeping the memory allocations
and references consolidated to a minimum no. of these power-manageable
"memory regions". The memory hardware has the intelligence to automatically
transition memory banks that haven't been referenced for a threshold amount
of time, to low-power content-preserving states. And they can also perform
OS-cooperative power-off of unused (unallocated) memory regions. So the onus
is on the Linux VM to become power-aware and shape the allocations and
influence the references in such a way that it helps conserve memory power.
This involves consolidating the allocations/references at the right address
boundaries, keeping the memory-region granularity in mind.


So we can summarize the goals for the Linux MM as follows:

o Consolidate memory allocations and/or references such that they are not
spread across the entire memory address space, because the area of memory
that is not being referenced can reside in low power state.

o Support light-weight targeted memory compaction/reclaim, to evacuate
lightly-filled memory regions. This helps avoid memory references to
those regions, thereby allowing them to reside in low power states.


Assumptions and goals of this patchset:
--------------------------------------

In this patchset, we don't handle the part of getting the region boundary info
from the firmware/bootloader and populating it in the kernel data-structures.
The aim of this patchset is to propose and brainstorm on a power-aware design
of the Linux MM which can *use* the region boundary info to influence the MM
at various places such as page allocation, reclamation/compaction etc, thereby
contributing to memory power savings.

So, in this patchset, we assume a simple model in which each 512MB chunk of
memory can be independently power-managed, and hard-code this in the kernel.
As mentioned, the focus of this patchset is not so much on how we get this info
from the firmware or how exactly we handle a variety of configurations, but
rather on discussing the power-savings/performance impact of the MM algorithms
that *act* upon this info in order to save memory power.

That said, its not very far-fetched to try this out with actual region
boundary info to get the real power savings numbers. For example, on ARM
platforms, we can make the bootloader export this info to the OS via device-tree
and then run this patchset. (This was the method used to get the power-numbers
in [3]). But even without doing that, we can very well evaluate the
effectiveness of this patchset in contributing to power-savings, by analyzing
the free page statistics per-memory-region; and we can observe the performance
impact by running benchmarks - this is the approach currently used to evaluate
this patchset.


Brief overview of the design/approach used in this patchset:
-----------------------------------------------------------

The strategy used in this patchset is to do page allocation in increasing order
of memory regions (within a zone) and perform region-compaction in the reverse
order, as illustrated below.

---------------------------- Increasing region number---------------------->

Direction of allocation---> <---Direction of region-compaction


We achieve this by making 3 major design changes to the Linux kernel memory
manager, as outlined below.

1. Sorted-buddy design of buddy freelists:

To allocate pages in increasing order of memory regions, we first capture
the memory region boundaries in suitable zone-level data-structures, and
modify the buddy allocator such that we maintain the buddy freelists in
region-sorted-order. Thus, automatically page allocation occurs in the
order of increasing memory regions.

2. Split-allocator design: Page-Allocator as front-end; Region-Allocator as
back-end:

Mixing up movable and unmovable pages can disrupt opportunities for
consolidating allocations. In order to separate such pages at a memory-region
granularity, a "Region-Allocator" is introduced which allocates entire memory
regions. The Page-Allocator is then modified to get its memory from the
Region-Allocator and hand out pages to requesting applications in
page-sized chunks. This design is showing significant improvements in the
effectiveness of this patchset in consolidating allocations to minimum no.
of memory regions.

3. Targeted region compaction/evacuation:

Over time, due to multiple alloc()s and free()s in random order, memory gets
fragmented, which means the memory allocations will no longer be consolidated
to a minimum no. of memory regions. In such cases we need a light-weight
mechanism to opportunistically compact memory to evacuate lightly-filled
memory regions, thereby enhancing the power-savings.

Noting that CMA (Contiguous Memory Allocator) does targeted compaction to
achieve its goals, the v2 of this patchset generalized the targeted
compaction code and reused it to evacuate memory regions.

[ I have temporarily dropped this feature in this version (v3) of the
patchset, since it can benefit from some considerable changes. I'll revive
it in the next version and integrate it with the split-allocator design. ]


Experimental Results:
====================

I'll include the detailed results as a reply to this cover-letter, since it
can benefit from a dedicated discussion, rather than squeezing it here itself.


This patchset has been hosted in the below git tree. It applies cleanly on
v3.11-rc7.

git://github.com/srivatsabhat/linux.git mem-power-mgmt-v3


Changes in v3:
=============

* The major change is the splitting of the memory allocator into a
Page-Allocator front-end and a Region-Allocator back-end. This helps in
keeping movable and unmovable allocations separated across region
boundaries, thus improving the opportunities for consolidation of memory
allocations to a minimum no. of regions.

* A bunch of fixes all over, especially in the handling of freepage
migratetypes and the buddy merging code.


Changes in v2:
=============

* Fixed a bug in the NUMA case.
* Added a new optimized O(log n) sorting algorithm to speed up region-sorting
of the buddy freelists (patch 9). The efficiency of this new algorithm and
its design allows us to support large amounts of RAM quite easily.
* Added light-weight targetted compaction/reclaim support for memory power
management (patches 10-14).
* Revamped the cover-letter to better explain the idea behind memory power
management and this patchset.


Some important TODOs:
====================

1. Revive the targeted region-compaction/evacuation code and make it
work well with the new Page-Allocator - Region-Allocator split design.

2. Add optimizations to improve the performance and reduce the overhead in
the MM hot paths.

3. Add support for making this patchset work with sparsemem, THP, memcg etc.


References:
----------

[1]. LWN article that explains the goals and the design of my Memory Power
Management patchset:
http://lwn.net/Articles/547439/

[2]. v2 of the "Sorted-buddy" patchset with support for targeted memory
region compaction:
http://lwn.net/Articles/546696/

LWN article describing this design: http://lwn.net/Articles/547439/

v1 of the patchset:
http://thread.gmane.org/gmane.linux.power-management.general/28498

[3]. Estimate of potential power savings on Samsung exynos board
http://article.gmane.org/gmane.linux.kernel.mm/65935

[4]. C. Lefurgy, K. Rajamani, F. Rawson, W. Felter, M. Kistler, and Tom Keller.
Energy management for commercial servers. In IEEE Computer, pages 39â48,
Dec 2003.
Link: researcher.ibm.com/files/us-lefurgy/computer2003.pdf

[5]. ACPI 5.0 and MPST support
http://www.acpi.info/spec.htm
Section 5.2.21 Memory Power State Table (MPST)

[6]. Prototype implementation of parsing of ACPI 5.0 MPST tables, by Srinivas
Pandruvada.
https://lkml.org/lkml/2013/4/18/349

[7]. Review comments suggesting modifying the buddy allocator to be aware of
memory regions:
http://article.gmane.org/gmane.linux.power-management.general/24862
http://article.gmane.org/gmane.linux.power-management.general/25061
http://article.gmane.org/gmane.linux.kernel.mm/64689

[8]. Patch series that implemented the node-region-zone hierarchy design:
http://lwn.net/Articles/445045/
http://thread.gmane.org/gmane.linux.kernel.mm/63840

Summary of the discussion on that patchset:
http://article.gmane.org/gmane.linux.power-management.general/25061

Forward-port of that patchset to 3.7-rc3 (minimal x86 config)
http://thread.gmane.org/gmane.linux.kernel.mm/89202

[9]. Disadvantages of having memory regions in the hierarchy between nodes and
zones:
http://article.gmane.org/gmane.linux.kernel.mm/63849


Srivatsa S. Bhat (35):
mm: Restructure free-page stealing code and fix a bug
mm: Fix the value of fallback_migratetype in alloc_extfrag tracepoint
mm: Introduce memory regions data-structure to capture region boundaries within nodes
mm: Initialize node memory regions during boot
mm: Introduce and initialize zone memory regions
mm: Add helpers to retrieve node region and zone region for a given page
mm: Add data-structures to describe memory regions within the zones' freelists
mm: Demarcate and maintain pageblocks in region-order in the zones' freelists
mm: Track the freepage migratetype of pages accurately
mm: Use the correct migratetype during buddy merging
mm: Add an optimized version of del_from_freelist to keep page allocation fast
bitops: Document the difference in indexing between fls() and __fls()
mm: A new optimized O(log n) sorting algo to speed up buddy-sorting
mm: Add support to accurately track per-memory-region allocation
mm: Print memory region statistics to understand the buddy allocator behavior
mm: Enable per-memory-region fragmentation stats in pagetypeinfo
mm: Add aggressive bias to prefer lower regions during page allocation
mm: Introduce a "Region Allocator" to manage entire memory regions
mm: Add a mechanism to add pages to buddy freelists in bulk
mm: Provide a mechanism to delete pages from buddy freelists in bulk
mm: Provide a mechanism to release free memory to the region allocator
mm: Provide a mechanism to request free memory from the region allocator
mm: Maintain the counter for freepages in the region allocator
mm: Propagate the sorted-buddy bias for picking free regions, to region allocator
mm: Fix vmstat to also account for freepages in the region allocator
mm: Drop some very expensive sorted-buddy related checks under DEBUG_PAGEALLOC
mm: Connect Page Allocator(PA) to Region Allocator(RA); add PA => RA flow
mm: Connect Page Allocator(PA) to Region Allocator(RA); add PA <= RA flow
mm: Update the freepage migratetype of pages during region allocation
mm: Provide a mechanism to check if a given page is in the region allocator
mm: Add a way to request pages of a particular region from the region allocator
mm: Modify move_freepages() to handle pages in the region allocator properly
mm: Never change migratetypes of pageblocks during freepage stealing
mm: Set pageblock migratetype when allocating regions from region allocator
mm: Use a cache between page-allocator and region-allocator


arch/x86/include/asm/bitops.h | 4
include/asm-generic/bitops/__fls.h | 5
include/linux/mm.h | 42 ++
include/linux/mmzone.h | 75 +++
include/trace/events/kmem.h | 10
mm/compaction.c | 2
mm/page_alloc.c | 935 +++++++++++++++++++++++++++++++++---
mm/vmstat.c | 130 +++++
8 files changed, 1124 insertions(+), 79 deletions(-)


Regards,
Srivatsa S. Bhat
IBM Linux Technology Center

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/