Re: Memory synchronization vs. interrupt handlers

[H. Peter Anvin]

On 08/29/2013 04:51 PM, Paul E. McKenney wrote:
> On Wed, Aug 28, 2013 at 01:28:08PM -0700, H. Peter Anvin wrote:
>> On 08/28/2013 12:16 PM, Alan Stern wrote:
>>> Russell, Peter, and Ingo:
>>>
>>> Can you folks enlighten us regarding this issue for some common 
>>> architectures?
>>
>> On x86, IRET is a serializing instruction; it guarantees hard
>> serialization of absolutely everything.
> 
> So a second interrupt from this same device could not appear to happen
> before the IRET, no matter what device and/or I/O bus?  Or is IRET
> defined to synchronize all the way out to the whatever device is
> generating the next interrupt?

The second interrupt from this same device can occur as soon as the EOI
cycle is done, which happens before the IRET.  The EOI cycle is an I/O
operation and since integer operations to memory are strongly ordered
that implies all other effects are globally visible.

In addition, there is usually synchronization that happens due to
reading an interrupt status register or something else.

>> I would expect architectures that have weak memory ordering to put
>> appropriate barriers in the IRQ entry/exit code.
> 
> Adding a few on CC.  Also restating the question as I understand it:
> 
> 	Suppose that a given device generates an interrupt on CPU 0,
> 	but that before CPU 0's interrupt handler completes, this device
> 	wants to generate a second interrupt on CPU 1.  This can happen
> 	as soon as CPU 0's handler does an EOI or equivalent.
> 
> 	Can CPU 1's interrupt handler assume that all the in-memory effects
> 	of CPU 0's interrupt handler will be visible, even if neither
> 	interrupt handler uses locking or memory barriers?
> 

On x86 it certainly can.

	-hpa


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/