Re: [PATCH v4 0/5] clk: dt: bindings for mux, divider & gate clocks

[Santosh Shilimkar]

Mike,

On Thursday 22 August 2013 01:53 AM, Mike Turquette wrote:
> This series introduces binding definitions for common register-mapped
> clock multiplexer, divider and gate IP blocks along with the
> corresponding setup functions for matching DT data.  The bindings are
> similar to the struct definitions but please don't hold that against the
> binding: the struct definitions closely model the hardware register
> layout.
> 
> The delta from v3 is very small and only consists of cosmetic changes
> and one functional change for better error handling.
> 
> Changes since v3:
> * added Tested-by & Reviewed-by from Heiko
> * replaced underscores with dashes in DT property names
> * bail from of clock setup function early if of_iomap fails
> * removed unecessary explict cast
> 
> Mike Turquette (5):
>   clk: divider: replace bitfield width with mask
>   clk: of: helper for determining number of parent clocks
>   clk: dt: binding for basic multiplexer clock
>   clk: dt: binding for basic divider clock
>   clk: dt: binding for basic gate clock
> 
I have used $subject series as the base for the Keystone
ccf support and tested these patches on Keystone EVM. Will
post those patches soon on the lists.

For the series if you need more tested-by tags, feel free to
add,
Tested-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/