Re: [PATCH 2/4] pinmux: Add TB10x pinmux driver

[Linus Walleij]

On Wed, Aug 21, 2013 at 5:57 PM, Christian Ruppert
<christian.ruppert@xxxxxxxxxx> wrote:
> On Wed, Aug 14, 2013 at 06:53:56PM +0200, Linus Walleij wrote:
>>
>> OK, that can also be called a "bank" or "register" but whatever.
>
> As you suggested below I re-read Documentation/pinctrl.txt and it got me
> even more confused:
> Am I right in my understanding that the whole concept of a
> "port/bank/register" or whatever we would like to call it does not exist
> in the pinctrl framework?

Not that I know :-)

If what it means is a number of registers from address x thru x+n
words in memory that is called a register range usually, the
Device Tree "regs" property.

If you're referring to a subset of registers dealing with a batch
of pins or a single pin that can use whatever terminology you
want, I consider it a driver-internal detail. Some GPIO drivers
talk about "ports" when they have e.g. 2 x 32bit registers
handling a total of 64 pins, then that is port 0 and port 1 or
something like this, but it's really up to the driver.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/