[PATCH 07/10] crypto: omap-aes: Add IRQ info and helper macros

From: Joel Fernandes
Date: Wed Aug 14 2013 - 19:16:21 EST


Add IRQ information to pdata and helper macros. These are
required for PIO-mode support.

Signed-off-by: Joel Fernandes <joelf@xxxxxx>
---
drivers/crypto/omap-aes.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index 71da52b..c057eac 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -82,6 +82,10 @@

#define AES_REG_LENGTH_N(x) (0x54 + ((x) * 0x04))

+#define AES_REG_IRQ_STATUS(dd) ((dd)->pdata->irq_status_ofs)
+#define AES_REG_IRQ_ENABLE(dd) ((dd)->pdata->irq_enable_ofs)
+#define AES_REG_IRQ_DATA_IN BIT(1)
+#define AES_REG_IRQ_DATA_OUT BIT(2)
#define DEFAULT_TIMEOUT (5*HZ)

#define FLAGS_MODE_MASK 0x000f
@@ -127,6 +131,8 @@ struct omap_aes_pdata {
u32 data_ofs;
u32 rev_ofs;
u32 mask_ofs;
+ u32 irq_enable_ofs;
+ u32 irq_status_ofs;

u32 dma_enable_in;
u32 dma_enable_out;
@@ -846,6 +852,8 @@ static const struct omap_aes_pdata omap_aes_pdata_omap4 = {
.data_ofs = 0x60,
.rev_ofs = 0x80,
.mask_ofs = 0x84,
+ .irq_status_ofs = 0x8c,
+ .irq_enable_ofs = 0x90,
.dma_enable_in = BIT(5),
.dma_enable_out = BIT(6),
.major_mask = 0x0700,
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/