Re: [RFC][PATCH] drivers: base: dynamic memory block creation

From: Seth Jennings
Date: Wed Aug 14 2013 - 17:53:07 EST


On Wed, Aug 14, 2013 at 02:37:26PM -0700, Yinghai Lu wrote:
> On Wed, Aug 14, 2013 at 1:35 PM, Greg Kroah-Hartman
> <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> > On Wed, Aug 14, 2013 at 01:05:33PM -0700, Dave Hansen wrote:
> >> On 08/14/2013 12:43 PM, Greg Kroah-Hartman wrote:
> >> > On Wed, Aug 14, 2013 at 02:31:45PM -0500, Seth Jennings wrote:
> >> >> ppc64 has a normal memory block size of 256M (however sometimes as low
> >> >> as 16M depending on the system LMB size), and (I think) x86 is 128M. With
> >> >> 1TB of RAM and a 256M block size, that's 4k memory blocks with 20 sysfs
> >> >> entries per block that's around 80k items that need be created at boot
> >> >> time in sysfs. Some systems go up to 16TB where the issue is even more
> >> >> severe.
> >> >
> >> > The x86 developers are working with larger memory sizes and they haven't
> >> > seen the problem in this area, for them it's in other places, as I
> >> > referred to in my other email.
> >>
> >> The SGI guys don't run normal distro kernels and don't turn on memory
> >> hotplug, so they don't see this. I do the same in my testing of
> >> large-memory x86 systems to speed up my boots. I'll go stick it back in
> >> there and see if I can generate some numbers for a 1TB machine.
> >>
> >> But, the problem on x86 is at _worst_ 1/8 of the problem on ppc64 since
> >> the SECTION_SIZE is so 8x bigger by default.
> >>
> >> Also, the cost of creating sections on ppc is *MUCH* higher than x86
> >> when amortized across the number of pages that you're initializing. A
> >> section on ppc64 has to be created for each (2^24/2^16)=256 pages while
> >> one on x86 is created for each (2^27/2^12)=32768 pages.
> >>
> >> Thus, x86 folks with our small pages and large sections tend to be
> >> focused on per-page costs. The ppc folks with their small sections and
> >> larger pages tend to be focused on the per-section costs.
> >
> > Ah, thanks for the explaination, now it makes more sense why they are
> > both optimizing in different places.
>
> I had one local patch that sent before, it will probe block size for
> generic x86_64.
> set it to 2G looks more reasonable for system with 1T+ ram.

If I am understanding you correctly, you are suggesting we make the block size
a boot time tunable. It can't be a runtime tunable since the memory blocks are
currently created a boot time.

On ppc64, we can't just just choose a memory block size since it must align
with the underlying LMB (logical memory block) size, set in the hardware ahead
of time.

Seth

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/