Re: [PATCH] usb: musb: am335x: Do not remove the session binHOST-only mode

[Bin Liu]

Sebastian,

On Tue, Aug 13, 2013 at 8:44 AM, Sebastian Andrzej Siewior
<bigeasy@xxxxxxxxxxxxx> wrote:
> This was a misunderstanding then. Sorry. I understood that the bin has
> to be unset and then the controller set it once a device there.
You meant ID pin? I think it should be set all the time since the
driver initialized for host-only mode, if it is unset, the controller
has not way to know if a device is plugged or not.

>
>> I am not sure if anywhere mentioned about the ID pin, but ASAIK all
>> the different boards using am335x have ID pin grounded for host port.
> evm is the only I am aware of. The evm-sk and beagle bone have just one
> port. Beagle bone black is not mainline.
You meant the dts only supports one port for evm-sk and bone? The
boards physically have two ports, usb0 is device only, usb1 is host
only.

> This is the case already. From musb_start()
> …
>         if (musb->port_mode != MUSB_PORT_MODE_HOST &&
>              (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
>                  musb->is_active = 1;
>          } else {
>                  devctl |= MUSB_DEVCTL_SESSION;
>          }
> …
great! then the host port on gp evm should work now, right?

>
>>>> -Bin.
>
> Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/