[PATCH 05/10] leds: lp5523: make separate API for loading engine

[Milo Kim]

lp5523_load_engine()
  It is called whenever the operation mode is changed to 'load'.
  It is used for simple operation mode change.
  It will be used when engine mode and LED selection is updated in later patch.

lp5523_load_engine_and_select_page()
  Change the operation mode to 'load' and select program page number.
  This is used for programming a LED pattern at a time.
  So load_engine() is replaced with new API, load_engine_and_select_page()
  in lp5523_firmware_loaded().

Signed-off-by: Milo Kim <milo.kim@xxxxxx>
---
 drivers/leds/leds-lp5523.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 72c10e2..b509480 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -152,15 +152,21 @@ static void lp5523_load_engine(struct lp55xx_chip *chip)
 		[LP55XX_ENGINE_3] = LP5523_LOAD_ENG3,
 	};
 
+	lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]);
+
+	lp5523_wait_opmode_done();
+}
+
+static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip)
+{
+	enum lp55xx_engine_index idx = chip->engine_idx;
 	u8 page_sel[] = {
 		[LP55XX_ENGINE_1] = LP5523_PAGE_ENG1,
 		[LP55XX_ENGINE_2] = LP5523_PAGE_ENG2,
 		[LP55XX_ENGINE_3] = LP5523_PAGE_ENG3,
 	};
 
-	lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]);
-
-	lp5523_wait_opmode_done();
+	lp5523_load_engine(chip);
 
 	lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]);
 }
@@ -290,7 +296,7 @@ static void lp5523_firmware_loaded(struct lp55xx_chip *chip)
 	 *  2) write firmware data into program memory
 	 */
 
-	lp5523_load_engine(chip);
+	lp5523_load_engine_and_select_page(chip);
 	lp5523_update_program_memory(chip, fw->data, fw->size);
 }
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/