Re: [PATCH v4 1/4] mmc: dw_mmc: Invalidate cache of current_speedafter suspend/resume
From: Jaehoon Chung
Date: Thu Aug 08 2013 - 01:15:36 EST
Hi Doung
On 08/07/2013 06:37 AM, Doug Anderson wrote:
> The dw_mmc driver keeps a cache of the current slot->clock in order to
> avoid doing a whole lot of work every time set_ios() is called.
> However, after suspend/resume the register values are bogus so we need
> to ensure that the cached value is invalidated.
>
> In many cases we got by without this since the core mmc code fiddles
> with the clock a lot. If we've got a card present we're probably
> running it at something like 50MHz and the core will temporarily
> switch us to 400kHz after resume. One case that didn't work (for me)
> is the case of having no card in the slot. The slot is initted to
> 400kHz at boot time. After suspend/resume the slot thinks it's still
> at 400kHz (due to the cache) so doesn't adjust timing. When it tries
> to send the command at probe time it just times out and gets left in a
> bad state.
>
> Invalidating the current_speed also means that we don't need to call:
> dw_mci_setup_bus(slot, true);
> ...to force an update of the clock in the case when the slot was left
> powered.
>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> ---
> Changes in v4: None
> Changes in v3: None
> Changes in v2:
> - Fix typo (some -> come)
> - Use ~0 instead of 0xFFFFFFFF; add comment about value
>
> drivers/mmc/host/dw_mmc.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index ee5f167..13a363c 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2511,13 +2511,19 @@ int dw_mci_resume(struct dw_mci *host)
> DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
> mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
>
> + /*
> + * Invalidate the 'current_speed' value since CLKDIV has come up in
> + * default state and our cache is incorrect; set to something we know
> + * slot->clock won't be.
> + */
> + host->current_speed = ~0;
> +
> for (i = 0; i < host->num_slots; i++) {
> struct dw_mci_slot *slot = host->slot[i];
> if (!slot)
> continue;
> if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
> dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
> - dw_mci_setup_bus(slot, true);
If we need not to call dw_mci_setup_bus() at here,
the we can also remove the "force_clkinit".
Best Regards,
Jaehoon Chung
> }
>
> ret = mmc_resume_host(host->slot[i]->mmc);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/