[PATCH 15/26] x86 STA2X11: remove the sta2x11-mfd driver.
From: Davide Ciminaghi
Date: Wed Aug 07 2013 - 06:28:51 EST
This patch removes the mfd driver for the Connext chip, the final goal
being to create platform devices through the new OF enabled version of
the pci to amba bridge.
Most of the sta2x11-mfd.h header file is moved to asm/sta2x11.h.
Platform drivers for sctl, scr, apbreg and apb_soc_regs are moved under
arch/x86/platform/sta2x11.c (but the common probe function is empty at
the moment, since we have no struct sta2x11_mfd anymore).
Makefiles and Kconfigs are updated accordingly (note that REGMAP_MMIO is
now selected by CONFIG_STA2X11, not CONFIG_STA2X11_MFD, which does not
exist anymore).
Signed-off-by: Davide Ciminaghi <ciminaghi@xxxxxxxxx>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@xxxxxx>
---
arch/x86/Kconfig | 1 +
arch/x86/include/asm/sta2x11.h | 318 ++++++++++++++++-
arch/x86/platform/Makefile | 1 +
arch/x86/platform/sta2x11/Makefile | 1 +
arch/x86/platform/sta2x11/sta2x11.c | 279 ++++++++++++++
drivers/mfd/Kconfig | 6 -
drivers/mfd/Makefile | 1 -
drivers/mfd/sta2x11-mfd.c | 680 -----------------------------------
include/linux/mfd/sta2x11-mfd.h | 518 --------------------------
9 files changed, 598 insertions(+), 1207 deletions(-)
create mode 100644 arch/x86/platform/sta2x11/Makefile
create mode 100644 arch/x86/platform/sta2x11/sta2x11.c
delete mode 100644 drivers/mfd/sta2x11-mfd.c
delete mode 100644 include/linux/mfd/sta2x11-mfd.h
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 0a779eb..ae05df92 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -559,6 +559,7 @@ config STA2X11
select OF_EARLY_FLATTREE
select OF_DYNAMIC
select IRQ_DOMAIN
+ select REGMAP_MMIO
default n
---help---
This adds support for boards based on the STA2X11 IO-Hub,
diff --git a/arch/x86/include/asm/sta2x11.h b/arch/x86/include/asm/sta2x11.h
index e9d32df..cd76923 100644
--- a/arch/x86/include/asm/sta2x11.h
+++ b/arch/x86/include/asm/sta2x11.h
@@ -1,12 +1,326 @@
/*
* Header file for STMicroelectronics ConneXt (STA2X11) IOHub
+ * Copyright (c) 2009-2011 Wind River Systems, Inc.
+ * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
*/
#ifndef __ASM_STA2X11_H
#define __ASM_STA2X11_H
+#include <linux/types.h>
#include <linux/pci.h>
-/* This needs to be called from the MFD to configure its sub-devices */
-struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev);
+enum sta2x11_plat_dev {
+ sta2x11_sctl = 0,
+ sta2x11_gpio,
+ sta2x11_scr,
+ sta2x11_time,
+ sta2x11_apbreg,
+ sta2x11_apb_soc_regs,
+ sta2x11_vic,
+ sta2x11_n_plat_devs,
+};
+
+#define STA2X11_SCTL_NAME "sta2x11-sctl"
+#define STA2X11_GPIO_NAME "sta2x11-gpio"
+#define STA2X11_SCR_NAME "sta2x11-scr"
+#define STA2X11_TIME_NAME "sta2x11-time"
+#define STA2X11_APBREG_NAME "sta2x11-apbreg"
+#define STA2X11_APB_SOC_REGS_NAME "sta2x11-apb-soc-regs"
+#define STA2X11_VIC_NAME "sta2x11-vic"
+
+/* CAN and MLB */
+#define APBREG_BSR 0x00 /* Bridge Status Reg */
+#define APBREG_PAER 0x08 /* Peripherals Address Error Reg */
+#define APBREG_PWAC 0x20 /* Peripheral Write Access Control reg */
+#define APBREG_PRAC 0x40 /* Peripheral Read Access Control reg */
+#define APBREG_PCG 0x60 /* Peripheral Clock Gating Reg */
+#define APBREG_PUR 0x80 /* Peripheral Under Reset Reg */
+#define APBREG_EMU_PCG 0xA0 /* Emulator Peripheral Clock Gating Reg */
+
+#define APBREG_CAN (1 << 1)
+#define APBREG_MLB (1 << 3)
+
+/* SARAC */
+#define APBREG_BSR_SARAC 0x100 /* Bridge Status Reg */
+#define APBREG_PAER_SARAC 0x108 /* Peripherals Address Error Reg */
+#define APBREG_PWAC_SARAC 0x120 /* Peripheral Write Access Control reg */
+#define APBREG_PRAC_SARAC 0x140 /* Peripheral Read Access Control reg */
+#define APBREG_PCG_SARAC 0x160 /* Peripheral Clock Gating Reg */
+#define APBREG_PUR_SARAC 0x180 /* Peripheral Under Reset Reg */
+#define APBREG_EMU_PCG_SARAC 0x1A0 /* Emulator Peripheral Clock Gating Reg */
+
+#define APBREG_SARAC (1 << 2)
+
+#define SCTL_SCCTL 0x00 /* System controller control register */
+#define SCTL_ARMCFG 0x04 /* ARM configuration register */
+#define SCTL_SCPLLCTL 0x08 /* PLL control status register */
+
+#define SCTL_SCPLLCTL_AUDIO_PLL_PD BIT(1)
+#define SCTL_SCPLLCTL_FRAC_CONTROL BIT(3)
+#define SCTL_SCPLLCTL_STRB_BYPASS BIT(6)
+#define SCTL_SCPLLCTL_STRB_INPUT BIT(8)
+
+#define SCTL_SCPLLFCTRL 0x0c /* PLL frequency control register */
+
+#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_MASK 0xff
+#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_SHIFT 10
+#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_MASK 7
+#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_SHIFT 21
+#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_MASK 7
+#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_SHIFT 18
+#define SCTL_SCPLLFCTRL_DITHER_DISABLE_MASK 0x03
+#define SCTL_SCPLLFCTRL_DITHER_DISABLE_SHIFT 4
+
+
+#define SCTL_SCRESFRACT 0x10 /* PLL fractional input register */
+
+#define SCTL_SCRESFRACT_MASK 0x0000ffff
+
+
+#define SCTL_SCRESCTRL1 0x14 /* Peripheral reset control 1 */
+#define SCTL_SCRESXTRL2 0x18 /* Peripheral reset control 2 */
+#define SCTL_SCPEREN0 0x1c /* Peripheral clock enable register 0 */
+#define SCTL_SCPEREN1 0x20 /* Peripheral clock enable register 1 */
+#define SCTL_SCPEREN2 0x24 /* Peripheral clock enable register 2 */
+#define SCTL_SCGRST 0x28 /* Peripheral global reset */
+#define SCTL_SCPCIECSBRST 0x2c /* PCIe PAB CSB reset status register */
+#define SCTL_SCPCIPMCR1 0x30 /* PCI power management control 1 */
+#define SCTL_SCPCIPMCR2 0x34 /* PCI power management control 2 */
+#define SCTL_SCPCIPMSR1 0x38 /* PCI power management status 1 */
+#define SCTL_SCPCIPMSR2 0x3c /* PCI power management status 2 */
+#define SCTL_SCPCIPMSR3 0x40 /* PCI power management status 3 */
+#define SCTL_SCINTREN 0x44 /* Interrupt enable */
+#define SCTL_SCRISR 0x48 /* RAW interrupt status */
+#define SCTL_SCCLKSTAT0 0x4c /* Peripheral clocks status 0 */
+#define SCTL_SCCLKSTAT1 0x50 /* Peripheral clocks status 1 */
+#define SCTL_SCCLKSTAT2 0x54 /* Peripheral clocks status 2 */
+#define SCTL_SCRSTSTA 0x58 /* Reset status register */
+
+#define SCTL_SCRESCTRL1_USB_PHY_POR (1 << 0)
+#define SCTL_SCRESCTRL1_USB_OTG (1 << 1)
+#define SCTL_SCRESCTRL1_USB_HRST (1 << 2)
+#define SCTL_SCRESCTRL1_USB_PHY_HOST (1 << 3)
+#define SCTL_SCRESCTRL1_SATAII (1 << 4)
+#define SCTL_SCRESCTRL1_VIP (1 << 5)
+#define SCTL_SCRESCTRL1_PER_MMC0 (1 << 6)
+#define SCTL_SCRESCTRL1_PER_MMC1 (1 << 7)
+#define SCTL_SCRESCTRL1_PER_GPIO0 (1 << 8)
+#define SCTL_SCRESCTRL1_PER_GPIO1 (1 << 9)
+#define SCTL_SCRESCTRL1_PER_GPIO2 (1 << 10)
+#define SCTL_SCRESCTRL1_PER_GPIO3 (1 << 11)
+#define SCTL_SCRESCTRL1_PER_MTU0 (1 << 12)
+#define SCTL_SCRESCTRL1_KER_SPI0 (1 << 13)
+#define SCTL_SCRESCTRL1_KER_SPI1 (1 << 14)
+#define SCTL_SCRESCTRL1_KER_SPI2 (1 << 15)
+#define SCTL_SCRESCTRL1_KER_MCI0 (1 << 16)
+#define SCTL_SCRESCTRL1_KER_MCI1 (1 << 17)
+#define SCTL_SCRESCTRL1_PRE_HSI2C0 (1 << 18)
+#define SCTL_SCRESCTRL1_PER_HSI2C1 (1 << 19)
+#define SCTL_SCRESCTRL1_PER_HSI2C2 (1 << 20)
+#define SCTL_SCRESCTRL1_PER_HSI2C3 (1 << 21)
+#define SCTL_SCRESCTRL1_PER_MSP0 (1 << 22)
+#define SCTL_SCRESCTRL1_PER_MSP1 (1 << 23)
+#define SCTL_SCRESCTRL1_PER_MSP2 (1 << 24)
+#define SCTL_SCRESCTRL1_PER_MSP3 (1 << 25)
+#define SCTL_SCRESCTRL1_PER_MSP4 (1 << 26)
+#define SCTL_SCRESCTRL1_PER_MSP5 (1 << 27)
+#define SCTL_SCRESCTRL1_PER_MMC (1 << 28)
+#define SCTL_SCRESCTRL1_KER_MSP0 (1 << 29)
+#define SCTL_SCRESCTRL1_KER_MSP1 (1 << 30)
+#define SCTL_SCRESCTRL1_KER_MSP2 (1 << 31)
+
+#define SCTL_SCPEREN0_UART0 (1 << 0)
+#define SCTL_SCPEREN0_UART1 (1 << 1)
+#define SCTL_SCPEREN0_UART2 (1 << 2)
+#define SCTL_SCPEREN0_UART3 (1 << 3)
+#define SCTL_SCPEREN0_MSP0 (1 << 4)
+#define SCTL_SCPEREN0_MSP1 (1 << 5)
+#define SCTL_SCPEREN0_MSP2 (1 << 6)
+#define SCTL_SCPEREN0_MSP3 (1 << 7)
+#define SCTL_SCPEREN0_MSP4 (1 << 8)
+#define SCTL_SCPEREN0_MSP5 (1 << 9)
+#define SCTL_SCPEREN0_SPI0 (1 << 10)
+#define SCTL_SCPEREN0_SPI1 (1 << 11)
+#define SCTL_SCPEREN0_SPI2 (1 << 12)
+#define SCTL_SCPEREN0_I2C0 (1 << 13)
+#define SCTL_SCPEREN0_I2C1 (1 << 14)
+#define SCTL_SCPEREN0_I2C2 (1 << 15)
+#define SCTL_SCPEREN0_I2C3 (1 << 16)
+#define SCTL_SCPEREN0_SVDO_LVDS (1 << 17)
+#define SCTL_SCPEREN0_USB_HOST (1 << 18)
+#define SCTL_SCPEREN0_USB_OTG (1 << 19)
+#define SCTL_SCPEREN0_MCI0 (1 << 20)
+#define SCTL_SCPEREN0_MCI1 (1 << 21)
+#define SCTL_SCPEREN0_MCI2 (1 << 22)
+#define SCTL_SCPEREN0_MCI3 (1 << 23)
+#define SCTL_SCPEREN0_SATA (1 << 24)
+#define SCTL_SCPEREN0_ETHERNET (1 << 25)
+#define SCTL_SCPEREN0_VIC (1 << 26)
+#define SCTL_SCPEREN0_DMA_AUDIO (1 << 27)
+#define SCTL_SCPEREN0_DMA_SOC (1 << 28)
+#define SCTL_SCPEREN0_RAM (1 << 29)
+#define SCTL_SCPEREN0_VIP (1 << 30)
+#define SCTL_SCPEREN0_ARM (1 << 31)
+
+#define SCTL_SCPEREN1_UART0 (1 << 0)
+#define SCTL_SCPEREN1_UART1 (1 << 1)
+#define SCTL_SCPEREN1_UART2 (1 << 2)
+#define SCTL_SCPEREN1_UART3 (1 << 3)
+#define SCTL_SCPEREN1_MSP0 (1 << 4)
+#define SCTL_SCPEREN1_MSP1 (1 << 5)
+#define SCTL_SCPEREN1_MSP2 (1 << 6)
+#define SCTL_SCPEREN1_MSP3 (1 << 7)
+#define SCTL_SCPEREN1_MSP4 (1 << 8)
+#define SCTL_SCPEREN1_MSP5 (1 << 9)
+#define SCTL_SCPEREN1_SPI0 (1 << 10)
+#define SCTL_SCPEREN1_SPI1 (1 << 11)
+#define SCTL_SCPEREN1_SPI2 (1 << 12)
+#define SCTL_SCPEREN1_I2C0 (1 << 13)
+#define SCTL_SCPEREN1_I2C1 (1 << 14)
+#define SCTL_SCPEREN1_I2C2 (1 << 15)
+#define SCTL_SCPEREN1_I2C3 (1 << 16)
+#define SCTL_SCPEREN1_USB_PHY (1 << 17)
+
+#define PCIE_EP1_FUNC3_0_INTR_REG 0x000
+#define PCIE_EP1_FUNC7_4_INTR_REG 0x004
+#define PCIE_EP2_FUNC3_0_INTR_REG 0x008
+#define PCIE_EP2_FUNC7_4_INTR_REG 0x00c
+#define PCIE_EP3_FUNC3_0_INTR_REG 0x010
+#define PCIE_EP3_FUNC7_4_INTR_REG 0x014
+#define PCIE_EP4_FUNC3_0_INTR_REG 0x018
+#define PCIE_EP4_FUNC7_4_INTR_REG 0x01c
+#define PCIE_INTR_ENABLE0_REG 0x020
+#define PCIE_INTR_ENABLE1_REG 0x024
+#define PCIE_EP1_FUNC_TC_REG 0x028
+#define PCIE_EP2_FUNC_TC_REG 0x02c
+#define PCIE_EP3_FUNC_TC_REG 0x030
+#define PCIE_EP4_FUNC_TC_REG 0x034
+#define PCIE_EP1_FUNC_F_REG 0x038
+#define PCIE_EP2_FUNC_F_REG 0x03c
+#define PCIE_EP3_FUNC_F_REG 0x040
+#define PCIE_EP4_FUNC_F_REG 0x044
+#define PCIE_PAB_AMBA_SW_RST_REG 0x048
+#define PCIE_PM_STATUS_0_PORT_0_4 0x04c
+#define PCIE_PM_STATUS_7_0_EP1 0x050
+#define PCIE_PM_STATUS_7_0_EP2 0x054
+#define PCIE_PM_STATUS_7_0_EP3 0x058
+#define PCIE_PM_STATUS_7_0_EP4 0x05c
+#define PCIE_DEV_ID_0_EP1_REG 0x060
+#define PCIE_CC_REV_ID_0_EP1_REG 0x064
+#define PCIE_DEV_ID_1_EP1_REG 0x068
+#define PCIE_CC_REV_ID_1_EP1_REG 0x06c
+#define PCIE_DEV_ID_2_EP1_REG 0x070
+#define PCIE_CC_REV_ID_2_EP1_REG 0x074
+#define PCIE_DEV_ID_3_EP1_REG 0x078
+#define PCIE_CC_REV_ID_3_EP1_REG 0x07c
+#define PCIE_DEV_ID_4_EP1_REG 0x080
+#define PCIE_CC_REV_ID_4_EP1_REG 0x084
+#define PCIE_DEV_ID_5_EP1_REG 0x088
+#define PCIE_CC_REV_ID_5_EP1_REG 0x08c
+#define PCIE_DEV_ID_6_EP1_REG 0x090
+#define PCIE_CC_REV_ID_6_EP1_REG 0x094
+#define PCIE_DEV_ID_7_EP1_REG 0x098
+#define PCIE_CC_REV_ID_7_EP1_REG 0x09c
+#define PCIE_DEV_ID_0_EP2_REG 0x0a0
+#define PCIE_CC_REV_ID_0_EP2_REG 0x0a4
+#define PCIE_DEV_ID_1_EP2_REG 0x0a8
+#define PCIE_CC_REV_ID_1_EP2_REG 0x0ac
+#define PCIE_DEV_ID_2_EP2_REG 0x0b0
+#define PCIE_CC_REV_ID_2_EP2_REG 0x0b4
+#define PCIE_DEV_ID_3_EP2_REG 0x0b8
+#define PCIE_CC_REV_ID_3_EP2_REG 0x0bc
+#define PCIE_DEV_ID_4_EP2_REG 0x0c0
+#define PCIE_CC_REV_ID_4_EP2_REG 0x0c4
+#define PCIE_DEV_ID_5_EP2_REG 0x0c8
+#define PCIE_CC_REV_ID_5_EP2_REG 0x0cc
+#define PCIE_DEV_ID_6_EP2_REG 0x0d0
+#define PCIE_CC_REV_ID_6_EP2_REG 0x0d4
+#define PCIE_DEV_ID_7_EP2_REG 0x0d8
+#define PCIE_CC_REV_ID_7_EP2_REG 0x0dC
+#define PCIE_DEV_ID_0_EP3_REG 0x0e0
+#define PCIE_CC_REV_ID_0_EP3_REG 0x0e4
+#define PCIE_DEV_ID_1_EP3_REG 0x0e8
+#define PCIE_CC_REV_ID_1_EP3_REG 0x0ec
+#define PCIE_DEV_ID_2_EP3_REG 0x0f0
+#define PCIE_CC_REV_ID_2_EP3_REG 0x0f4
+#define PCIE_DEV_ID_3_EP3_REG 0x0f8
+#define PCIE_CC_REV_ID_3_EP3_REG 0x0fc
+#define PCIE_DEV_ID_4_EP3_REG 0x100
+#define PCIE_CC_REV_ID_4_EP3_REG 0x104
+#define PCIE_DEV_ID_5_EP3_REG 0x108
+#define PCIE_CC_REV_ID_5_EP3_REG 0x10c
+#define PCIE_DEV_ID_6_EP3_REG 0x110
+#define PCIE_CC_REV_ID_6_EP3_REG 0x114
+#define PCIE_DEV_ID_7_EP3_REG 0x118
+#define PCIE_CC_REV_ID_7_EP3_REG 0x11c
+#define PCIE_DEV_ID_0_EP4_REG 0x120
+#define PCIE_CC_REV_ID_0_EP4_REG 0x124
+#define PCIE_DEV_ID_1_EP4_REG 0x128
+#define PCIE_CC_REV_ID_1_EP4_REG 0x12c
+#define PCIE_DEV_ID_2_EP4_REG 0x130
+#define PCIE_CC_REV_ID_2_EP4_REG 0x134
+#define PCIE_DEV_ID_3_EP4_REG 0x138
+#define PCIE_CC_REV_ID_3_EP4_REG 0x13c
+#define PCIE_DEV_ID_4_EP4_REG 0x140
+#define PCIE_CC_REV_ID_4_EP4_REG 0x144
+#define PCIE_DEV_ID_5_EP4_REG 0x148
+#define PCIE_CC_REV_ID_5_EP4_REG 0x14c
+#define PCIE_DEV_ID_6_EP4_REG 0x150
+#define PCIE_CC_REV_ID_6_EP4_REG 0x154
+#define PCIE_DEV_ID_7_EP4_REG 0x158
+#define PCIE_CC_REV_ID_7_EP4_REG 0x15c
+#define PCIE_SUBSYS_VEN_ID_REG 0x160
+#define PCIE_COMMON_CLOCK_CONFIG_0_4_0 0x164
+#define PCIE_MIPHYP_SSC_EN_REG 0x168
+#define PCIE_MIPHYP_ADDR_REG 0x16c
+#define PCIE_L1_ASPM_READY_REG 0x170
+#define PCIE_EXT_CFG_RDY_REG 0x174
+#define PCIE_SoC_INT_ROUTER_STATUS0_REG 0x178
+#define PCIE_SoC_INT_ROUTER_STATUS1_REG 0x17c
+#define PCIE_SoC_INT_ROUTER_STATUS2_REG 0x180
+#define PCIE_SoC_INT_ROUTER_STATUS3_REG 0x184
+#define DMA_IP_CTRL_REG 0x324
+#define DISP_BRIDGE_PU_PD_CTRL_REG 0x328
+#define VIP_PU_PD_CTRL_REG 0x32c
+#define USB_MLB_PU_PD_CTRL_REG 0x330
+#define SDIO_PU_PD_MISCFUNC_CTRL_REG1 0x334
+#define SDIO_PU_PD_MISCFUNC_CTRL_REG2 0x338
+#define UART_PU_PD_CTRL_REG 0x33c
+#define ARM_Lock 0x340
+#define SYS_IO_CHAR_REG1 0x344
+#define SYS_IO_CHAR_REG2 0x348
+#define SATA_CORE_ID_REG 0x34c
+#define SATA_CTRL_REG 0x350
+#define I2C_HSFIX_MISC_REG 0x354
+#define SPARE2_RESERVED 0x358
+#define SPARE3_RESERVED 0x35c
+#define MASTER_LOCK_REG 0x368
+#define SYSTEM_CONFIG_STATUS_REG 0x36c
+#define MSP_CLK_CTRL_REG 0x39c
+#define COMPENSATION_REG1 0x3c4
+#define COMPENSATION_REG2 0x3c8
+#define COMPENSATION_REG3 0x3cc
+#define TEST_CTL_REG 0x3d0
+
+/*
+ * SECR (OTP) registers
+ */
+#define STA2X11_SECR_CR 0x00
+#define STA2X11_SECR_FVR0 0x10
+#define STA2X11_SECR_FVR1 0x14
#endif /* __ASM_STA2X11_H */
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 01e0231..28fc10c 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -11,3 +11,4 @@ obj-y += sfi/
obj-y += ts5500/
obj-y += visws/
obj-y += uv/
+obj-y += sta2x11/
diff --git a/arch/x86/platform/sta2x11/Makefile b/arch/x86/platform/sta2x11/Makefile
new file mode 100644
index 0000000..798c497
--- /dev/null
+++ b/arch/x86/platform/sta2x11/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_STA2X11) = sta2x11.o
diff --git a/arch/x86/platform/sta2x11/sta2x11.c b/arch/x86/platform/sta2x11/sta2x11.c
new file mode 100644
index 0000000..ab3bc62
--- /dev/null
+++ b/arch/x86/platform/sta2x11/sta2x11.c
@@ -0,0 +1,279 @@
+/*
+ * Copyright (c) 2009-2011 Wind River Systems, Inc.
+ * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini, Davide Ciminaghi)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/seq_file.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <asm/sta2x11.h>
+
+static inline int __reg_within_range(unsigned int r,
+ unsigned int start,
+ unsigned int end)
+{
+ return ((r >= start) && (r <= end));
+}
+
+/*
+ * Special sta2x11 regmap lock/unlock functions
+ */
+
+static void sta2x11_regmap_lock(void *__lock)
+{
+ spinlock_t *lock = __lock;
+ spin_lock(lock);
+}
+
+static void sta2x11_regmap_unlock(void *__lock)
+{
+ spinlock_t *lock = __lock;
+ spin_unlock(lock);
+}
+
+/* OTP (one time programmable registers do not require locking */
+static void sta2x11_regmap_nolock(void *__lock)
+{
+}
+
+static bool sta2x11_sctl_writeable_reg(struct device *dev, unsigned int reg)
+{
+ return !__reg_within_range(reg, SCTL_SCPCIECSBRST, SCTL_SCRSTSTA);
+}
+
+static struct regmap_config sta2x11_sctl_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .lock = sta2x11_regmap_lock,
+ .unlock = sta2x11_regmap_unlock,
+ .max_register = SCTL_SCRSTSTA,
+ .writeable_reg = sta2x11_sctl_writeable_reg,
+};
+
+static bool sta2x11_scr_readable_reg(struct device *dev, unsigned int reg)
+{
+ return (reg == STA2X11_SECR_CR) ||
+ __reg_within_range(reg, STA2X11_SECR_FVR0, STA2X11_SECR_FVR1);
+}
+
+static bool sta2x11_scr_writeable_reg(struct device *dev, unsigned int reg)
+{
+ return false;
+}
+
+static struct regmap_config sta2x11_scr_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .lock = sta2x11_regmap_nolock,
+ .unlock = sta2x11_regmap_nolock,
+ .max_register = STA2X11_SECR_FVR1,
+ .readable_reg = sta2x11_scr_readable_reg,
+ .writeable_reg = sta2x11_scr_writeable_reg,
+};
+
+static bool sta2x11_apbreg_readable_reg(struct device *dev, unsigned int reg)
+{
+ /* Two blocks (CAN and MLB, SARAC) 0x100 bytes apart */
+ if (reg >= APBREG_BSR_SARAC)
+ reg -= APBREG_BSR_SARAC;
+ switch (reg) {
+ case APBREG_BSR:
+ case APBREG_PAER:
+ case APBREG_PWAC:
+ case APBREG_PRAC:
+ case APBREG_PCG:
+ case APBREG_PUR:
+ case APBREG_EMU_PCG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool sta2x11_apbreg_writeable_reg(struct device *dev, unsigned int reg)
+{
+ if (reg >= APBREG_BSR_SARAC)
+ reg -= APBREG_BSR_SARAC;
+ if (!sta2x11_apbreg_readable_reg(dev, reg))
+ return false;
+ return reg != APBREG_PAER;
+}
+
+static struct regmap_config sta2x11_apbreg_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .lock = sta2x11_regmap_lock,
+ .unlock = sta2x11_regmap_unlock,
+ .max_register = APBREG_EMU_PCG_SARAC,
+ .readable_reg = sta2x11_apbreg_readable_reg,
+ .writeable_reg = sta2x11_apbreg_writeable_reg,
+};
+
+static bool sta2x11_apb_soc_regs_readable_reg(struct device *dev,
+ unsigned int reg)
+{
+ return reg <= PCIE_SoC_INT_ROUTER_STATUS3_REG ||
+ __reg_within_range(reg, DMA_IP_CTRL_REG, SPARE3_RESERVED) ||
+ __reg_within_range(reg, MASTER_LOCK_REG,
+ SYSTEM_CONFIG_STATUS_REG) ||
+ reg == MSP_CLK_CTRL_REG ||
+ __reg_within_range(reg, COMPENSATION_REG1, TEST_CTL_REG);
+}
+
+static bool sta2x11_apb_soc_regs_writeable_reg(struct device *dev,
+ unsigned int reg)
+{
+ if (!sta2x11_apb_soc_regs_readable_reg(dev, reg))
+ return false;
+ switch (reg) {
+ case PCIE_COMMON_CLOCK_CONFIG_0_4_0:
+ case SYSTEM_CONFIG_STATUS_REG:
+ case COMPENSATION_REG1:
+ case PCIE_SoC_INT_ROUTER_STATUS0_REG...PCIE_SoC_INT_ROUTER_STATUS3_REG:
+ case PCIE_PM_STATUS_0_PORT_0_4...PCIE_PM_STATUS_7_0_EP4:
+ return false;
+ default:
+ return true;
+ }
+}
+
+static struct regmap_config sta2x11_apb_soc_regs_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .lock = sta2x11_regmap_lock,
+ .unlock = sta2x11_regmap_unlock,
+ .max_register = TEST_CTL_REG,
+ .readable_reg = sta2x11_apb_soc_regs_readable_reg,
+ .writeable_reg = sta2x11_apb_soc_regs_writeable_reg,
+};
+
+static struct regmap_config *
+sta2x11_platform_regmap_configs[sta2x11_n_plat_devs] = {
+ [sta2x11_sctl] = &sta2x11_sctl_regmap_config,
+ [sta2x11_apbreg] = &sta2x11_apbreg_regmap_config,
+ [sta2x11_apb_soc_regs] = &sta2x11_apb_soc_regs_regmap_config,
+ [sta2x11_scr] = &sta2x11_scr_regmap_config,
+};
+
+/* Probe for the four platform devices */
+
+static int sta2x11_platform_probe(struct platform_device *dev,
+ enum sta2x11_plat_dev index)
+{
+ return -EINVAL;
+}
+
+static int sta2x11_sctl_probe(struct platform_device *dev)
+{
+ return sta2x11_platform_probe(dev, sta2x11_sctl);
+}
+
+static int sta2x11_apbreg_probe(struct platform_device *dev)
+{
+ return sta2x11_platform_probe(dev, sta2x11_apbreg);
+}
+
+static int sta2x11_apb_soc_regs_probe(struct platform_device *dev)
+{
+ return sta2x11_platform_probe(dev, sta2x11_apb_soc_regs);
+}
+
+static int sta2x11_scr_probe(struct platform_device *dev)
+{
+ return sta2x11_platform_probe(dev, sta2x11_scr);
+}
+
+/* The three platform drivers */
+static struct platform_driver sta2x11_sctl_platform_driver = {
+ .driver = {
+ .name = STA2X11_SCTL_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = sta2x11_sctl_probe,
+};
+
+static int __init sta2x11_sctl_init(void)
+{
+ pr_info("%s\n", __func__);
+ return platform_driver_register(&sta2x11_sctl_platform_driver);
+}
+
+static struct platform_driver sta2x11_platform_driver = {
+ .driver = {
+ .name = STA2X11_APBREG_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = sta2x11_apbreg_probe,
+};
+
+static int __init sta2x11_apbreg_init(void)
+{
+ pr_info("%s\n", __func__);
+ return platform_driver_register(&sta2x11_platform_driver);
+}
+
+static struct platform_driver sta2x11_apb_soc_regs_platform_driver = {
+ .driver = {
+ .name = STA2X11_APB_SOC_REGS_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = sta2x11_apb_soc_regs_probe,
+};
+
+static int __init sta2x11_apb_soc_regs_init(void)
+{
+ pr_info("%s\n", __func__);
+ return platform_driver_register(&sta2x11_apb_soc_regs_platform_driver);
+}
+
+static struct platform_driver sta2x11_scr_platform_driver = {
+ .driver = {
+ .name = STA2X11_SCR_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = sta2x11_scr_probe,
+};
+
+static int __init sta2x11_scr_init(void)
+{
+ pr_info("%s\n", __func__);
+ return platform_driver_register(&sta2x11_scr_platform_driver);
+}
+
+subsys_initcall(sta2x11_apbreg_init);
+subsys_initcall(sta2x11_sctl_init);
+subsys_initcall(sta2x11_apb_soc_regs_init);
+subsys_initcall(sta2x11_scr_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Wind River");
+MODULE_DESCRIPTION("STA2x11 platform drivers");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 633ee43..372d221 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -666,12 +666,6 @@ config STMPE_SPI
This is used to enable SPI interface of STMPE
endmenu
-config MFD_STA2X11
- bool "STMicroelectronics STA2X11"
- depends on STA2X11 && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_MMIO
-
config MFD_SYSCON
bool "System Controller Register R/W Based on Regmap"
select REGMAP_MMIO
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 3c90051..4819411 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
obj-$(CONFIG_MFD_TI_SSP) += ti-ssp.o
obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o
-obj-$(CONFIG_MFD_STA2X11) += sta2x11-mfd.o
obj-$(CONFIG_MFD_STMPE) += stmpe.o
obj-$(CONFIG_STMPE_I2C) += stmpe-i2c.o
obj-$(CONFIG_STMPE_SPI) += stmpe-spi.o
diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c
deleted file mode 100644
index 65c6fa6..0000000
--- a/drivers/mfd/sta2x11-mfd.c
+++ /dev/null
@@ -1,680 +0,0 @@
-/*
- * Copyright (c) 2009-2011 Wind River Systems, Inc.
- * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini, Davide Ciminaghi)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/sta2x11-mfd.h>
-#include <linux/regmap.h>
-
-#include <asm/sta2x11.h>
-
-static inline int __reg_within_range(unsigned int r,
- unsigned int start,
- unsigned int end)
-{
- return ((r >= start) && (r <= end));
-}
-
-/* This describes STA2X11 MFD chip for us, we may have several */
-struct sta2x11_mfd {
- struct sta2x11_instance *instance;
- struct regmap *regmap[sta2x11_n_mfd_plat_devs];
- spinlock_t lock[sta2x11_n_mfd_plat_devs];
- struct list_head list;
- void __iomem *regs[sta2x11_n_mfd_plat_devs];
-};
-
-static LIST_HEAD(sta2x11_mfd_list);
-
-/* Three functions to act on the list */
-static struct sta2x11_mfd *sta2x11_mfd_find(struct pci_dev *pdev)
-{
- struct sta2x11_instance *instance;
- struct sta2x11_mfd *mfd;
-
- if (!pdev && !list_empty(&sta2x11_mfd_list)) {
- pr_warning("%s: Unspecified device, "
- "using first instance\n", __func__);
- return list_entry(sta2x11_mfd_list.next,
- struct sta2x11_mfd, list);
- }
-
- instance = sta2x11_get_instance(pdev);
- if (!instance)
- return NULL;
- list_for_each_entry(mfd, &sta2x11_mfd_list, list) {
- if (mfd->instance == instance)
- return mfd;
- }
- return NULL;
-}
-
-static int sta2x11_mfd_add(struct pci_dev *pdev, gfp_t flags)
-{
- int i;
- struct sta2x11_mfd *mfd = sta2x11_mfd_find(pdev);
- struct sta2x11_instance *instance;
-
- if (mfd)
- return -EBUSY;
- instance = sta2x11_get_instance(pdev);
- if (!instance)
- return -EINVAL;
- mfd = kzalloc(sizeof(*mfd), flags);
- if (!mfd)
- return -ENOMEM;
- INIT_LIST_HEAD(&mfd->list);
- for (i = 0; i < ARRAY_SIZE(mfd->lock); i++)
- spin_lock_init(&mfd->lock[i]);
- mfd->instance = instance;
- list_add(&mfd->list, &sta2x11_mfd_list);
- return 0;
-}
-
-/* This function is exported and is not expected to fail */
-u32 __sta2x11_mfd_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val,
- enum sta2x11_mfd_plat_dev index)
-{
- struct sta2x11_mfd *mfd = sta2x11_mfd_find(pdev);
- u32 r;
- unsigned long flags;
- void __iomem *regs;
-
- if (!mfd) {
- dev_warn(&pdev->dev, ": can't access sctl regs\n");
- return 0;
- }
-
- regs = mfd->regs[index];
- if (!regs) {
- dev_warn(&pdev->dev, ": system ctl not initialized\n");
- return 0;
- }
- spin_lock_irqsave(&mfd->lock[index], flags);
- r = readl(regs + reg);
- r &= ~mask;
- r |= val;
- if (mask)
- writel(r, regs + reg);
- spin_unlock_irqrestore(&mfd->lock[index], flags);
- return r;
-}
-EXPORT_SYMBOL(__sta2x11_mfd_mask);
-
-int sta2x11_mfd_get_regs_data(struct platform_device *dev,
- enum sta2x11_mfd_plat_dev index,
- void __iomem **regs,
- spinlock_t **lock)
-{
- struct pci_dev *pdev = *(struct pci_dev **)dev_get_platdata(&dev->dev);
- struct sta2x11_mfd *mfd;
-
- if (!pdev)
- return -ENODEV;
- mfd = sta2x11_mfd_find(pdev);
- if (!mfd)
- return -ENODEV;
- if (index >= sta2x11_n_mfd_plat_devs)
- return -ENODEV;
- *regs = mfd->regs[index];
- *lock = &mfd->lock[index];
- pr_debug("%s %d *regs = %p\n", __func__, __LINE__, *regs);
- return *regs ? 0 : -ENODEV;
-}
-EXPORT_SYMBOL(sta2x11_mfd_get_regs_data);
-
-/*
- * Special sta2x11-mfd regmap lock/unlock functions
- */
-
-static void sta2x11_regmap_lock(void *__lock)
-{
- spinlock_t *lock = __lock;
- spin_lock(lock);
-}
-
-static void sta2x11_regmap_unlock(void *__lock)
-{
- spinlock_t *lock = __lock;
- spin_unlock(lock);
-}
-
-/* OTP (one time programmable registers do not require locking */
-static void sta2x11_regmap_nolock(void *__lock)
-{
-}
-
-static const char *sta2x11_mfd_names[sta2x11_n_mfd_plat_devs] = {
- [sta2x11_sctl] = STA2X11_MFD_SCTL_NAME,
- [sta2x11_apbreg] = STA2X11_MFD_APBREG_NAME,
- [sta2x11_apb_soc_regs] = STA2X11_MFD_APB_SOC_REGS_NAME,
- [sta2x11_scr] = STA2X11_MFD_SCR_NAME,
-};
-
-static bool sta2x11_sctl_writeable_reg(struct device *dev, unsigned int reg)
-{
- return !__reg_within_range(reg, SCTL_SCPCIECSBRST, SCTL_SCRSTSTA);
-}
-
-static struct regmap_config sta2x11_sctl_regmap_config = {
- .reg_bits = 32,
- .reg_stride = 4,
- .val_bits = 32,
- .lock = sta2x11_regmap_lock,
- .unlock = sta2x11_regmap_unlock,
- .max_register = SCTL_SCRSTSTA,
- .writeable_reg = sta2x11_sctl_writeable_reg,
-};
-
-static bool sta2x11_scr_readable_reg(struct device *dev, unsigned int reg)
-{
- return (reg == STA2X11_SECR_CR) ||
- __reg_within_range(reg, STA2X11_SECR_FVR0, STA2X11_SECR_FVR1);
-}
-
-static bool sta2x11_scr_writeable_reg(struct device *dev, unsigned int reg)
-{
- return false;
-}
-
-static struct regmap_config sta2x11_scr_regmap_config = {
- .reg_bits = 32,
- .reg_stride = 4,
- .val_bits = 32,
- .lock = sta2x11_regmap_nolock,
- .unlock = sta2x11_regmap_nolock,
- .max_register = STA2X11_SECR_FVR1,
- .readable_reg = sta2x11_scr_readable_reg,
- .writeable_reg = sta2x11_scr_writeable_reg,
-};
-
-static bool sta2x11_apbreg_readable_reg(struct device *dev, unsigned int reg)
-{
- /* Two blocks (CAN and MLB, SARAC) 0x100 bytes apart */
- if (reg >= APBREG_BSR_SARAC)
- reg -= APBREG_BSR_SARAC;
- switch (reg) {
- case APBREG_BSR:
- case APBREG_PAER:
- case APBREG_PWAC:
- case APBREG_PRAC:
- case APBREG_PCG:
- case APBREG_PUR:
- case APBREG_EMU_PCG:
- return true;
- default:
- return false;
- }
-}
-
-static bool sta2x11_apbreg_writeable_reg(struct device *dev, unsigned int reg)
-{
- if (reg >= APBREG_BSR_SARAC)
- reg -= APBREG_BSR_SARAC;
- if (!sta2x11_apbreg_readable_reg(dev, reg))
- return false;
- return reg != APBREG_PAER;
-}
-
-static struct regmap_config sta2x11_apbreg_regmap_config = {
- .reg_bits = 32,
- .reg_stride = 4,
- .val_bits = 32,
- .lock = sta2x11_regmap_lock,
- .unlock = sta2x11_regmap_unlock,
- .max_register = APBREG_EMU_PCG_SARAC,
- .readable_reg = sta2x11_apbreg_readable_reg,
- .writeable_reg = sta2x11_apbreg_writeable_reg,
-};
-
-static bool sta2x11_apb_soc_regs_readable_reg(struct device *dev,
- unsigned int reg)
-{
- return reg <= PCIE_SoC_INT_ROUTER_STATUS3_REG ||
- __reg_within_range(reg, DMA_IP_CTRL_REG, SPARE3_RESERVED) ||
- __reg_within_range(reg, MASTER_LOCK_REG,
- SYSTEM_CONFIG_STATUS_REG) ||
- reg == MSP_CLK_CTRL_REG ||
- __reg_within_range(reg, COMPENSATION_REG1, TEST_CTL_REG);
-}
-
-static bool sta2x11_apb_soc_regs_writeable_reg(struct device *dev,
- unsigned int reg)
-{
- if (!sta2x11_apb_soc_regs_readable_reg(dev, reg))
- return false;
- switch (reg) {
- case PCIE_COMMON_CLOCK_CONFIG_0_4_0:
- case SYSTEM_CONFIG_STATUS_REG:
- case COMPENSATION_REG1:
- case PCIE_SoC_INT_ROUTER_STATUS0_REG...PCIE_SoC_INT_ROUTER_STATUS3_REG:
- case PCIE_PM_STATUS_0_PORT_0_4...PCIE_PM_STATUS_7_0_EP4:
- return false;
- default:
- return true;
- }
-}
-
-static struct regmap_config sta2x11_apb_soc_regs_regmap_config = {
- .reg_bits = 32,
- .reg_stride = 4,
- .val_bits = 32,
- .lock = sta2x11_regmap_lock,
- .unlock = sta2x11_regmap_unlock,
- .max_register = TEST_CTL_REG,
- .readable_reg = sta2x11_apb_soc_regs_readable_reg,
- .writeable_reg = sta2x11_apb_soc_regs_writeable_reg,
-};
-
-static struct regmap_config *
-sta2x11_mfd_regmap_configs[sta2x11_n_mfd_plat_devs] = {
- [sta2x11_sctl] = &sta2x11_sctl_regmap_config,
- [sta2x11_apbreg] = &sta2x11_apbreg_regmap_config,
- [sta2x11_apb_soc_regs] = &sta2x11_apb_soc_regs_regmap_config,
- [sta2x11_scr] = &sta2x11_scr_regmap_config,
-};
-
-/* Probe for the four platform devices */
-
-static int sta2x11_mfd_platform_probe(struct platform_device *dev,
- enum sta2x11_mfd_plat_dev index)
-{
- struct pci_dev **pdev;
- struct sta2x11_mfd *mfd;
- struct resource *res;
- const char *name = sta2x11_mfd_names[index];
- struct regmap_config *regmap_config = sta2x11_mfd_regmap_configs[index];
-
- pdev = dev_get_platdata(&dev->dev);
- mfd = sta2x11_mfd_find(*pdev);
- if (!mfd)
- return -ENODEV;
- if (!regmap_config)
- return -ENODEV;
-
- res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENOMEM;
-
- if (!request_mem_region(res->start, resource_size(res), name))
- return -EBUSY;
-
- mfd->regs[index] = ioremap(res->start, resource_size(res));
- if (!mfd->regs[index]) {
- release_mem_region(res->start, resource_size(res));
- return -ENOMEM;
- }
- regmap_config->lock_arg = &mfd->lock;
- /*
- No caching, registers could be reached both via regmap and via
- void __iomem *
- */
- regmap_config->cache_type = REGCACHE_NONE;
- mfd->regmap[index] = devm_regmap_init_mmio(&dev->dev, mfd->regs[index],
- regmap_config);
- WARN_ON(!mfd->regmap[index]);
-
- return 0;
-}
-
-static int sta2x11_sctl_probe(struct platform_device *dev)
-{
- return sta2x11_mfd_platform_probe(dev, sta2x11_sctl);
-}
-
-static int sta2x11_apbreg_probe(struct platform_device *dev)
-{
- return sta2x11_mfd_platform_probe(dev, sta2x11_apbreg);
-}
-
-static int sta2x11_apb_soc_regs_probe(struct platform_device *dev)
-{
- return sta2x11_mfd_platform_probe(dev, sta2x11_apb_soc_regs);
-}
-
-static int sta2x11_scr_probe(struct platform_device *dev)
-{
- return sta2x11_mfd_platform_probe(dev, sta2x11_scr);
-}
-
-/* The three platform drivers */
-static struct platform_driver sta2x11_sctl_platform_driver = {
- .driver = {
- .name = STA2X11_MFD_SCTL_NAME,
- .owner = THIS_MODULE,
- },
- .probe = sta2x11_sctl_probe,
-};
-
-static int __init sta2x11_sctl_init(void)
-{
- pr_info("%s\n", __func__);
- return platform_driver_register(&sta2x11_sctl_platform_driver);
-}
-
-static struct platform_driver sta2x11_platform_driver = {
- .driver = {
- .name = STA2X11_MFD_APBREG_NAME,
- .owner = THIS_MODULE,
- },
- .probe = sta2x11_apbreg_probe,
-};
-
-static int __init sta2x11_apbreg_init(void)
-{
- pr_info("%s\n", __func__);
- return platform_driver_register(&sta2x11_platform_driver);
-}
-
-static struct platform_driver sta2x11_apb_soc_regs_platform_driver = {
- .driver = {
- .name = STA2X11_MFD_APB_SOC_REGS_NAME,
- .owner = THIS_MODULE,
- },
- .probe = sta2x11_apb_soc_regs_probe,
-};
-
-static int __init sta2x11_apb_soc_regs_init(void)
-{
- pr_info("%s\n", __func__);
- return platform_driver_register(&sta2x11_apb_soc_regs_platform_driver);
-}
-
-static struct platform_driver sta2x11_scr_platform_driver = {
- .driver = {
- .name = STA2X11_MFD_SCR_NAME,
- .owner = THIS_MODULE,
- },
- .probe = sta2x11_scr_probe,
-};
-
-static int __init sta2x11_scr_init(void)
-{
- pr_info("%s\n", __func__);
- return platform_driver_register(&sta2x11_scr_platform_driver);
-}
-
-
-/*
- * What follows are the PCI devices that host the above pdevs.
- * Each logic block is 4kB and they are all consecutive: we use this info.
- */
-
-/* Mfd 0 device */
-
-/* Mfd 0, Bar 0 */
-enum mfd0_bar0_cells {
- STA2X11_GPIO_0 = 0,
- STA2X11_GPIO_1,
- STA2X11_GPIO_2,
- STA2X11_GPIO_3,
- STA2X11_SCTL,
- STA2X11_SCR,
- STA2X11_TIME,
-};
-/* Mfd 0 , Bar 1 */
-enum mfd0_bar1_cells {
- STA2X11_APBREG = 0,
-};
-#define CELL_4K(_name, _cell) { \
- .name = _name, \
- .start = _cell * 4096, .end = _cell * 4096 + 4095, \
- .flags = IORESOURCE_MEM, \
- }
-
-static const struct resource gpio_resources[] = {
- {
- /* 4 consecutive cells, 1 driver */
- .name = STA2X11_MFD_GPIO_NAME,
- .start = 0,
- .end = (4 * 4096) - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-static const struct resource sctl_resources[] = {
- CELL_4K(STA2X11_MFD_SCTL_NAME, STA2X11_SCTL),
-};
-static const struct resource scr_resources[] = {
- CELL_4K(STA2X11_MFD_SCR_NAME, STA2X11_SCR),
-};
-static const struct resource time_resources[] = {
- CELL_4K(STA2X11_MFD_TIME_NAME, STA2X11_TIME),
-};
-
-static const struct resource apbreg_resources[] = {
- CELL_4K(STA2X11_MFD_APBREG_NAME, STA2X11_APBREG),
-};
-
-#define DEV(_name, _r) \
- { .name = _name, .num_resources = ARRAY_SIZE(_r), .resources = _r, }
-
-static struct mfd_cell sta2x11_mfd0_bar0[] = {
- /* offset 0: we add pdata later */
- DEV(STA2X11_MFD_GPIO_NAME, gpio_resources),
- DEV(STA2X11_MFD_SCTL_NAME, sctl_resources),
- DEV(STA2X11_MFD_SCR_NAME, scr_resources),
- DEV(STA2X11_MFD_TIME_NAME, time_resources),
-};
-
-static struct mfd_cell sta2x11_mfd0_bar1[] = {
- DEV(STA2X11_MFD_APBREG_NAME, apbreg_resources),
-};
-
-/* Mfd 1 devices */
-
-/* Mfd 1, Bar 0 */
-enum mfd1_bar0_cells {
- STA2X11_VIC = 0,
-};
-
-/* Mfd 1, Bar 1 */
-enum mfd1_bar1_cells {
- STA2X11_APB_SOC_REGS = 0,
-};
-
-static const struct resource vic_resources[] = {
- CELL_4K(STA2X11_MFD_VIC_NAME, STA2X11_VIC),
-};
-
-static const struct resource apb_soc_regs_resources[] = {
- CELL_4K(STA2X11_MFD_APB_SOC_REGS_NAME, STA2X11_APB_SOC_REGS),
-};
-
-static struct mfd_cell sta2x11_mfd1_bar0[] = {
- DEV(STA2X11_MFD_VIC_NAME, vic_resources),
-};
-
-static struct mfd_cell sta2x11_mfd1_bar1[] = {
- DEV(STA2X11_MFD_APB_SOC_REGS_NAME, apb_soc_regs_resources),
-};
-
-
-static int sta2x11_mfd_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
- return 0;
-}
-
-static int sta2x11_mfd_resume(struct pci_dev *pdev)
-{
- int err;
-
- pci_set_power_state(pdev, 0);
- err = pci_enable_device(pdev);
- if (err)
- return err;
- pci_restore_state(pdev);
-
- return 0;
-}
-
-struct sta2x11_mfd_bar_setup_data {
- struct mfd_cell *cells;
- int ncells;
-};
-
-struct sta2x11_mfd_setup_data {
- struct sta2x11_mfd_bar_setup_data bars[2];
-};
-
-#define STA2X11_MFD0 0
-#define STA2X11_MFD1 1
-
-static struct sta2x11_mfd_setup_data mfd_setup_data[] = {
- /* Mfd 0: gpio, sctl, scr, timers / apbregs */
- [STA2X11_MFD0] = {
- .bars = {
- [0] = {
- .cells = sta2x11_mfd0_bar0,
- .ncells = ARRAY_SIZE(sta2x11_mfd0_bar0),
- },
- [1] = {
- .cells = sta2x11_mfd0_bar1,
- .ncells = ARRAY_SIZE(sta2x11_mfd0_bar1),
- },
- },
- },
- /* Mfd 1: vic / apb-soc-regs */
- [STA2X11_MFD1] = {
- .bars = {
- [0] = {
- .cells = sta2x11_mfd1_bar0,
- .ncells = ARRAY_SIZE(sta2x11_mfd1_bar0),
- },
- [1] = {
- .cells = sta2x11_mfd1_bar1,
- .ncells = ARRAY_SIZE(sta2x11_mfd1_bar1),
- },
- },
- },
-};
-
-static void sta2x11_mfd_setup(struct pci_dev *pdev,
- struct sta2x11_mfd_setup_data *sd)
-{
- int i, j;
- for (i = 0; i < ARRAY_SIZE(sd->bars); i++)
- for (j = 0; j < sd->bars[i].ncells; j++) {
- sd->bars[i].cells[j].pdata_size = sizeof(pdev);
- sd->bars[i].cells[j].platform_data = &pdev;
- }
-}
-
-static int sta2x11_mfd_probe(struct pci_dev *pdev,
- const struct pci_device_id *pci_id)
-{
- int err, i;
- struct sta2x11_mfd_setup_data *setup_data;
-
- dev_info(&pdev->dev, "%s\n", __func__);
-
- err = pci_enable_device(pdev);
- if (err) {
- dev_err(&pdev->dev, "Can't enable device.\n");
- return err;
- }
-
- err = pci_enable_msi(pdev);
- if (err)
- dev_info(&pdev->dev, "Enable msi failed\n");
-
- setup_data = pci_id->device == PCI_DEVICE_ID_STMICRO_GPIO ?
- &mfd_setup_data[STA2X11_MFD0] :
- &mfd_setup_data[STA2X11_MFD1];
-
- /* platform data is the pci device for all of them */
- sta2x11_mfd_setup(pdev, setup_data);
-
- /* Record this pdev before mfd_add_devices: their probe looks for it */
- if (!sta2x11_mfd_find(pdev))
- sta2x11_mfd_add(pdev, GFP_ATOMIC);
-
- /* Just 2 bars for all mfd's at present */
- for (i = 0; i < 2; i++) {
- err = mfd_add_devices(&pdev->dev, -1,
- setup_data->bars[i].cells,
- setup_data->bars[i].ncells,
- &pdev->resource[i],
- 0, NULL);
- if (err) {
- dev_err(&pdev->dev,
- "mfd_add_devices[%d] failed: %d\n", i, err);
- goto err_disable;
- }
- }
-
- return 0;
-
-err_disable:
- mfd_remove_devices(&pdev->dev);
- pci_disable_device(pdev);
- pci_disable_msi(pdev);
- return err;
-}
-
-static DEFINE_PCI_DEVICE_TABLE(sta2x11_mfd_tbl) = {
- {PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_GPIO)},
- {PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_VIC)},
- {0,},
-};
-
-static struct pci_driver sta2x11_mfd_driver = {
- .name = "sta2x11-mfd",
- .id_table = sta2x11_mfd_tbl,
- .probe = sta2x11_mfd_probe,
- .suspend = sta2x11_mfd_suspend,
- .resume = sta2x11_mfd_resume,
-};
-
-static int __init sta2x11_mfd_init(void)
-{
- pr_info("%s\n", __func__);
- return pci_register_driver(&sta2x11_mfd_driver);
-}
-
-/*
- * All of this must be ready before "normal" devices like MMCI appear.
- * But MFD (the pci device) can't be too early. The following choice
- * prepares platform drivers very early and probe the PCI device later,
- * but before other PCI devices.
- */
-subsys_initcall(sta2x11_apbreg_init);
-subsys_initcall(sta2x11_sctl_init);
-subsys_initcall(sta2x11_apb_soc_regs_init);
-subsys_initcall(sta2x11_scr_init);
-rootfs_initcall(sta2x11_mfd_init);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Wind River");
-MODULE_DESCRIPTION("STA2x11 mfd for GPIO, SCTL and APBREG");
-MODULE_DEVICE_TABLE(pci, sta2x11_mfd_tbl);
diff --git a/include/linux/mfd/sta2x11-mfd.h b/include/linux/mfd/sta2x11-mfd.h
deleted file mode 100644
index 9a855ac..0000000
--- a/include/linux/mfd/sta2x11-mfd.h
+++ /dev/null
@@ -1,518 +0,0 @@
-/*
- * Copyright (c) 2009-2011 Wind River Systems, Inc.
- * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * The STMicroelectronics ConneXt (STA2X11) chip has several unrelated
- * functions in one PCI endpoint functions. This driver simply
- * registers the platform devices in this iomemregion and exports a few
- * functions to access common registers
- */
-
-#ifndef __STA2X11_MFD_H
-#define __STA2X11_MFD_H
-#include <linux/types.h>
-#include <linux/pci.h>
-
-enum sta2x11_mfd_plat_dev {
- sta2x11_sctl = 0,
- sta2x11_gpio,
- sta2x11_scr,
- sta2x11_time,
- sta2x11_apbreg,
- sta2x11_apb_soc_regs,
- sta2x11_vic,
- sta2x11_n_mfd_plat_devs,
-};
-
-#define STA2X11_MFD_SCTL_NAME "sta2x11-sctl"
-#define STA2X11_MFD_GPIO_NAME "sta2x11-gpio"
-#define STA2X11_MFD_SCR_NAME "sta2x11-scr"
-#define STA2X11_MFD_TIME_NAME "sta2x11-time"
-#define STA2X11_MFD_APBREG_NAME "sta2x11-apbreg"
-#define STA2X11_MFD_APB_SOC_REGS_NAME "sta2x11-apb-soc-regs"
-#define STA2X11_MFD_VIC_NAME "sta2x11-vic"
-
-extern u32
-__sta2x11_mfd_mask(struct pci_dev *, u32, u32, u32, enum sta2x11_mfd_plat_dev);
-
-/*
- * The MFD PCI block includes the GPIO peripherals and other register blocks.
- * For GPIO, we have 32*4 bits (I use "gsta" for "gpio sta2x11".)
- */
-#define GSTA_GPIO_PER_BLOCK 32
-#define GSTA_NR_BLOCKS 4
-#define GSTA_NR_GPIO (GSTA_GPIO_PER_BLOCK * GSTA_NR_BLOCKS)
-
-/* Pinconfig is set by the board definition: altfunc, pull-up, pull-down */
-struct sta2x11_gpio_pdata {
- unsigned pinconfig[GSTA_NR_GPIO];
-};
-
-/* Macros below lifted from sh_pfc.h, with minor differences */
-#define PINMUX_TYPE_NONE 0
-#define PINMUX_TYPE_FUNCTION 1
-#define PINMUX_TYPE_OUTPUT_LOW 2
-#define PINMUX_TYPE_OUTPUT_HIGH 3
-#define PINMUX_TYPE_INPUT 4
-#define PINMUX_TYPE_INPUT_PULLUP 5
-#define PINMUX_TYPE_INPUT_PULLDOWN 6
-
-/* Give names to GPIO pins, like PXA does, taken from the manual */
-#define STA2X11_GPIO0 0
-#define STA2X11_GPIO1 1
-#define STA2X11_GPIO2 2
-#define STA2X11_GPIO3 3
-#define STA2X11_GPIO4 4
-#define STA2X11_GPIO5 5
-#define STA2X11_GPIO6 6
-#define STA2X11_GPIO7 7
-#define STA2X11_GPIO8_RGBOUT_RED7 8
-#define STA2X11_GPIO9_RGBOUT_RED6 9
-#define STA2X11_GPIO10_RGBOUT_RED5 10
-#define STA2X11_GPIO11_RGBOUT_RED4 11
-#define STA2X11_GPIO12_RGBOUT_RED3 12
-#define STA2X11_GPIO13_RGBOUT_RED2 13
-#define STA2X11_GPIO14_RGBOUT_RED1 14
-#define STA2X11_GPIO15_RGBOUT_RED0 15
-#define STA2X11_GPIO16_RGBOUT_GREEN7 16
-#define STA2X11_GPIO17_RGBOUT_GREEN6 17
-#define STA2X11_GPIO18_RGBOUT_GREEN5 18
-#define STA2X11_GPIO19_RGBOUT_GREEN4 19
-#define STA2X11_GPIO20_RGBOUT_GREEN3 20
-#define STA2X11_GPIO21_RGBOUT_GREEN2 21
-#define STA2X11_GPIO22_RGBOUT_GREEN1 22
-#define STA2X11_GPIO23_RGBOUT_GREEN0 23
-#define STA2X11_GPIO24_RGBOUT_BLUE7 24
-#define STA2X11_GPIO25_RGBOUT_BLUE6 25
-#define STA2X11_GPIO26_RGBOUT_BLUE5 26
-#define STA2X11_GPIO27_RGBOUT_BLUE4 27
-#define STA2X11_GPIO28_RGBOUT_BLUE3 28
-#define STA2X11_GPIO29_RGBOUT_BLUE2 29
-#define STA2X11_GPIO30_RGBOUT_BLUE1 30
-#define STA2X11_GPIO31_RGBOUT_BLUE0 31
-#define STA2X11_GPIO32_RGBOUT_VSYNCH 32
-#define STA2X11_GPIO33_RGBOUT_HSYNCH 33
-#define STA2X11_GPIO34_RGBOUT_DEN 34
-#define STA2X11_GPIO35_ETH_CRS_DV 35
-#define STA2X11_GPIO36_ETH_TXD1 36
-#define STA2X11_GPIO37_ETH_TXD0 37
-#define STA2X11_GPIO38_ETH_TX_EN 38
-#define STA2X11_GPIO39_MDIO 39
-#define STA2X11_GPIO40_ETH_REF_CLK 40
-#define STA2X11_GPIO41_ETH_RXD1 41
-#define STA2X11_GPIO42_ETH_RXD0 42
-#define STA2X11_GPIO43_MDC 43
-#define STA2X11_GPIO44_CAN_TX 44
-#define STA2X11_GPIO45_CAN_RX 45
-#define STA2X11_GPIO46_MLB_DAT 46
-#define STA2X11_GPIO47_MLB_SIG 47
-#define STA2X11_GPIO48_SPI0_CLK 48
-#define STA2X11_GPIO49_SPI0_TXD 49
-#define STA2X11_GPIO50_SPI0_RXD 50
-#define STA2X11_GPIO51_SPI0_FRM 51
-#define STA2X11_GPIO52_SPI1_CLK 52
-#define STA2X11_GPIO53_SPI1_TXD 53
-#define STA2X11_GPIO54_SPI1_RXD 54
-#define STA2X11_GPIO55_SPI1_FRM 55
-#define STA2X11_GPIO56_SPI2_CLK 56
-#define STA2X11_GPIO57_SPI2_TXD 57
-#define STA2X11_GPIO58_SPI2_RXD 58
-#define STA2X11_GPIO59_SPI2_FRM 59
-#define STA2X11_GPIO60_I2C0_SCL 60
-#define STA2X11_GPIO61_I2C0_SDA 61
-#define STA2X11_GPIO62_I2C1_SCL 62
-#define STA2X11_GPIO63_I2C1_SDA 63
-#define STA2X11_GPIO64_I2C2_SCL 64
-#define STA2X11_GPIO65_I2C2_SDA 65
-#define STA2X11_GPIO66_I2C3_SCL 66
-#define STA2X11_GPIO67_I2C3_SDA 67
-#define STA2X11_GPIO68_MSP0_RCK 68
-#define STA2X11_GPIO69_MSP0_RXD 69
-#define STA2X11_GPIO70_MSP0_RFS 70
-#define STA2X11_GPIO71_MSP0_TCK 71
-#define STA2X11_GPIO72_MSP0_TXD 72
-#define STA2X11_GPIO73_MSP0_TFS 73
-#define STA2X11_GPIO74_MSP0_SCK 74
-#define STA2X11_GPIO75_MSP1_CK 75
-#define STA2X11_GPIO76_MSP1_RXD 76
-#define STA2X11_GPIO77_MSP1_FS 77
-#define STA2X11_GPIO78_MSP1_TXD 78
-#define STA2X11_GPIO79_MSP2_CK 79
-#define STA2X11_GPIO80_MSP2_RXD 80
-#define STA2X11_GPIO81_MSP2_FS 81
-#define STA2X11_GPIO82_MSP2_TXD 82
-#define STA2X11_GPIO83_MSP3_CK 83
-#define STA2X11_GPIO84_MSP3_RXD 84
-#define STA2X11_GPIO85_MSP3_FS 85
-#define STA2X11_GPIO86_MSP3_TXD 86
-#define STA2X11_GPIO87_MSP4_CK 87
-#define STA2X11_GPIO88_MSP4_RXD 88
-#define STA2X11_GPIO89_MSP4_FS 89
-#define STA2X11_GPIO90_MSP4_TXD 90
-#define STA2X11_GPIO91_MSP5_CK 91
-#define STA2X11_GPIO92_MSP5_RXD 92
-#define STA2X11_GPIO93_MSP5_FS 93
-#define STA2X11_GPIO94_MSP5_TXD 94
-#define STA2X11_GPIO95_SDIO3_DAT3 95
-#define STA2X11_GPIO96_SDIO3_DAT2 96
-#define STA2X11_GPIO97_SDIO3_DAT1 97
-#define STA2X11_GPIO98_SDIO3_DAT0 98
-#define STA2X11_GPIO99_SDIO3_CLK 99
-#define STA2X11_GPIO100_SDIO3_CMD 100
-#define STA2X11_GPIO101 101
-#define STA2X11_GPIO102 102
-#define STA2X11_GPIO103 103
-#define STA2X11_GPIO104 104
-#define STA2X11_GPIO105_SDIO2_DAT3 105
-#define STA2X11_GPIO106_SDIO2_DAT2 106
-#define STA2X11_GPIO107_SDIO2_DAT1 107
-#define STA2X11_GPIO108_SDIO2_DAT0 108
-#define STA2X11_GPIO109_SDIO2_CLK 109
-#define STA2X11_GPIO110_SDIO2_CMD 110
-#define STA2X11_GPIO111 111
-#define STA2X11_GPIO112 112
-#define STA2X11_GPIO113 113
-#define STA2X11_GPIO114 114
-#define STA2X11_GPIO115_SDIO1_DAT3 115
-#define STA2X11_GPIO116_SDIO1_DAT2 116
-#define STA2X11_GPIO117_SDIO1_DAT1 117
-#define STA2X11_GPIO118_SDIO1_DAT0 118
-#define STA2X11_GPIO119_SDIO1_CLK 119
-#define STA2X11_GPIO120_SDIO1_CMD 120
-#define STA2X11_GPIO121 121
-#define STA2X11_GPIO122 122
-#define STA2X11_GPIO123 123
-#define STA2X11_GPIO124 124
-#define STA2X11_GPIO125_UART2_TXD 125
-#define STA2X11_GPIO126_UART2_RXD 126
-#define STA2X11_GPIO127_UART3_TXD 127
-
-/*
- * The APB bridge has its own registers, needed by our users as well.
- * They are accessed with the following read/mask/write function.
- */
-static inline u32
-sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val)
-{
- return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apbreg);
-}
-
-/* CAN and MLB */
-#define APBREG_BSR 0x00 /* Bridge Status Reg */
-#define APBREG_PAER 0x08 /* Peripherals Address Error Reg */
-#define APBREG_PWAC 0x20 /* Peripheral Write Access Control reg */
-#define APBREG_PRAC 0x40 /* Peripheral Read Access Control reg */
-#define APBREG_PCG 0x60 /* Peripheral Clock Gating Reg */
-#define APBREG_PUR 0x80 /* Peripheral Under Reset Reg */
-#define APBREG_EMU_PCG 0xA0 /* Emulator Peripheral Clock Gating Reg */
-
-#define APBREG_CAN (1 << 1)
-#define APBREG_MLB (1 << 3)
-
-/* SARAC */
-#define APBREG_BSR_SARAC 0x100 /* Bridge Status Reg */
-#define APBREG_PAER_SARAC 0x108 /* Peripherals Address Error Reg */
-#define APBREG_PWAC_SARAC 0x120 /* Peripheral Write Access Control reg */
-#define APBREG_PRAC_SARAC 0x140 /* Peripheral Read Access Control reg */
-#define APBREG_PCG_SARAC 0x160 /* Peripheral Clock Gating Reg */
-#define APBREG_PUR_SARAC 0x180 /* Peripheral Under Reset Reg */
-#define APBREG_EMU_PCG_SARAC 0x1A0 /* Emulator Peripheral Clock Gating Reg */
-
-#define APBREG_SARAC (1 << 2)
-
-/*
- * The system controller has its own registers. Some of these are accessed
- * by out users as well, using the following read/mask/write/function
- */
-static inline
-u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val)
-{
- return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_sctl);
-}
-
-#define SCTL_SCCTL 0x00 /* System controller control register */
-#define SCTL_ARMCFG 0x04 /* ARM configuration register */
-#define SCTL_SCPLLCTL 0x08 /* PLL control status register */
-
-#define SCTL_SCPLLCTL_AUDIO_PLL_PD BIT(1)
-#define SCTL_SCPLLCTL_FRAC_CONTROL BIT(3)
-#define SCTL_SCPLLCTL_STRB_BYPASS BIT(6)
-#define SCTL_SCPLLCTL_STRB_INPUT BIT(8)
-
-#define SCTL_SCPLLFCTRL 0x0c /* PLL frequency control register */
-
-#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_MASK 0xff
-#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_SHIFT 10
-#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_MASK 7
-#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_SHIFT 21
-#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_MASK 7
-#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_SHIFT 18
-#define SCTL_SCPLLFCTRL_DITHER_DISABLE_MASK 0x03
-#define SCTL_SCPLLFCTRL_DITHER_DISABLE_SHIFT 4
-
-
-#define SCTL_SCRESFRACT 0x10 /* PLL fractional input register */
-
-#define SCTL_SCRESFRACT_MASK 0x0000ffff
-
-
-#define SCTL_SCRESCTRL1 0x14 /* Peripheral reset control 1 */
-#define SCTL_SCRESXTRL2 0x18 /* Peripheral reset control 2 */
-#define SCTL_SCPEREN0 0x1c /* Peripheral clock enable register 0 */
-#define SCTL_SCPEREN1 0x20 /* Peripheral clock enable register 1 */
-#define SCTL_SCPEREN2 0x24 /* Peripheral clock enable register 2 */
-#define SCTL_SCGRST 0x28 /* Peripheral global reset */
-#define SCTL_SCPCIECSBRST 0x2c /* PCIe PAB CSB reset status register */
-#define SCTL_SCPCIPMCR1 0x30 /* PCI power management control 1 */
-#define SCTL_SCPCIPMCR2 0x34 /* PCI power management control 2 */
-#define SCTL_SCPCIPMSR1 0x38 /* PCI power management status 1 */
-#define SCTL_SCPCIPMSR2 0x3c /* PCI power management status 2 */
-#define SCTL_SCPCIPMSR3 0x40 /* PCI power management status 3 */
-#define SCTL_SCINTREN 0x44 /* Interrupt enable */
-#define SCTL_SCRISR 0x48 /* RAW interrupt status */
-#define SCTL_SCCLKSTAT0 0x4c /* Peripheral clocks status 0 */
-#define SCTL_SCCLKSTAT1 0x50 /* Peripheral clocks status 1 */
-#define SCTL_SCCLKSTAT2 0x54 /* Peripheral clocks status 2 */
-#define SCTL_SCRSTSTA 0x58 /* Reset status register */
-
-#define SCTL_SCRESCTRL1_USB_PHY_POR (1 << 0)
-#define SCTL_SCRESCTRL1_USB_OTG (1 << 1)
-#define SCTL_SCRESCTRL1_USB_HRST (1 << 2)
-#define SCTL_SCRESCTRL1_USB_PHY_HOST (1 << 3)
-#define SCTL_SCRESCTRL1_SATAII (1 << 4)
-#define SCTL_SCRESCTRL1_VIP (1 << 5)
-#define SCTL_SCRESCTRL1_PER_MMC0 (1 << 6)
-#define SCTL_SCRESCTRL1_PER_MMC1 (1 << 7)
-#define SCTL_SCRESCTRL1_PER_GPIO0 (1 << 8)
-#define SCTL_SCRESCTRL1_PER_GPIO1 (1 << 9)
-#define SCTL_SCRESCTRL1_PER_GPIO2 (1 << 10)
-#define SCTL_SCRESCTRL1_PER_GPIO3 (1 << 11)
-#define SCTL_SCRESCTRL1_PER_MTU0 (1 << 12)
-#define SCTL_SCRESCTRL1_KER_SPI0 (1 << 13)
-#define SCTL_SCRESCTRL1_KER_SPI1 (1 << 14)
-#define SCTL_SCRESCTRL1_KER_SPI2 (1 << 15)
-#define SCTL_SCRESCTRL1_KER_MCI0 (1 << 16)
-#define SCTL_SCRESCTRL1_KER_MCI1 (1 << 17)
-#define SCTL_SCRESCTRL1_PRE_HSI2C0 (1 << 18)
-#define SCTL_SCRESCTRL1_PER_HSI2C1 (1 << 19)
-#define SCTL_SCRESCTRL1_PER_HSI2C2 (1 << 20)
-#define SCTL_SCRESCTRL1_PER_HSI2C3 (1 << 21)
-#define SCTL_SCRESCTRL1_PER_MSP0 (1 << 22)
-#define SCTL_SCRESCTRL1_PER_MSP1 (1 << 23)
-#define SCTL_SCRESCTRL1_PER_MSP2 (1 << 24)
-#define SCTL_SCRESCTRL1_PER_MSP3 (1 << 25)
-#define SCTL_SCRESCTRL1_PER_MSP4 (1 << 26)
-#define SCTL_SCRESCTRL1_PER_MSP5 (1 << 27)
-#define SCTL_SCRESCTRL1_PER_MMC (1 << 28)
-#define SCTL_SCRESCTRL1_KER_MSP0 (1 << 29)
-#define SCTL_SCRESCTRL1_KER_MSP1 (1 << 30)
-#define SCTL_SCRESCTRL1_KER_MSP2 (1 << 31)
-
-#define SCTL_SCPEREN0_UART0 (1 << 0)
-#define SCTL_SCPEREN0_UART1 (1 << 1)
-#define SCTL_SCPEREN0_UART2 (1 << 2)
-#define SCTL_SCPEREN0_UART3 (1 << 3)
-#define SCTL_SCPEREN0_MSP0 (1 << 4)
-#define SCTL_SCPEREN0_MSP1 (1 << 5)
-#define SCTL_SCPEREN0_MSP2 (1 << 6)
-#define SCTL_SCPEREN0_MSP3 (1 << 7)
-#define SCTL_SCPEREN0_MSP4 (1 << 8)
-#define SCTL_SCPEREN0_MSP5 (1 << 9)
-#define SCTL_SCPEREN0_SPI0 (1 << 10)
-#define SCTL_SCPEREN0_SPI1 (1 << 11)
-#define SCTL_SCPEREN0_SPI2 (1 << 12)
-#define SCTL_SCPEREN0_I2C0 (1 << 13)
-#define SCTL_SCPEREN0_I2C1 (1 << 14)
-#define SCTL_SCPEREN0_I2C2 (1 << 15)
-#define SCTL_SCPEREN0_I2C3 (1 << 16)
-#define SCTL_SCPEREN0_SVDO_LVDS (1 << 17)
-#define SCTL_SCPEREN0_USB_HOST (1 << 18)
-#define SCTL_SCPEREN0_USB_OTG (1 << 19)
-#define SCTL_SCPEREN0_MCI0 (1 << 20)
-#define SCTL_SCPEREN0_MCI1 (1 << 21)
-#define SCTL_SCPEREN0_MCI2 (1 << 22)
-#define SCTL_SCPEREN0_MCI3 (1 << 23)
-#define SCTL_SCPEREN0_SATA (1 << 24)
-#define SCTL_SCPEREN0_ETHERNET (1 << 25)
-#define SCTL_SCPEREN0_VIC (1 << 26)
-#define SCTL_SCPEREN0_DMA_AUDIO (1 << 27)
-#define SCTL_SCPEREN0_DMA_SOC (1 << 28)
-#define SCTL_SCPEREN0_RAM (1 << 29)
-#define SCTL_SCPEREN0_VIP (1 << 30)
-#define SCTL_SCPEREN0_ARM (1 << 31)
-
-#define SCTL_SCPEREN1_UART0 (1 << 0)
-#define SCTL_SCPEREN1_UART1 (1 << 1)
-#define SCTL_SCPEREN1_UART2 (1 << 2)
-#define SCTL_SCPEREN1_UART3 (1 << 3)
-#define SCTL_SCPEREN1_MSP0 (1 << 4)
-#define SCTL_SCPEREN1_MSP1 (1 << 5)
-#define SCTL_SCPEREN1_MSP2 (1 << 6)
-#define SCTL_SCPEREN1_MSP3 (1 << 7)
-#define SCTL_SCPEREN1_MSP4 (1 << 8)
-#define SCTL_SCPEREN1_MSP5 (1 << 9)
-#define SCTL_SCPEREN1_SPI0 (1 << 10)
-#define SCTL_SCPEREN1_SPI1 (1 << 11)
-#define SCTL_SCPEREN1_SPI2 (1 << 12)
-#define SCTL_SCPEREN1_I2C0 (1 << 13)
-#define SCTL_SCPEREN1_I2C1 (1 << 14)
-#define SCTL_SCPEREN1_I2C2 (1 << 15)
-#define SCTL_SCPEREN1_I2C3 (1 << 16)
-#define SCTL_SCPEREN1_USB_PHY (1 << 17)
-
-/*
- * APB-SOC registers
- */
-static inline
-u32 sta2x11_apb_soc_regs_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val)
-{
- return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apb_soc_regs);
-}
-
-#define PCIE_EP1_FUNC3_0_INTR_REG 0x000
-#define PCIE_EP1_FUNC7_4_INTR_REG 0x004
-#define PCIE_EP2_FUNC3_0_INTR_REG 0x008
-#define PCIE_EP2_FUNC7_4_INTR_REG 0x00c
-#define PCIE_EP3_FUNC3_0_INTR_REG 0x010
-#define PCIE_EP3_FUNC7_4_INTR_REG 0x014
-#define PCIE_EP4_FUNC3_0_INTR_REG 0x018
-#define PCIE_EP4_FUNC7_4_INTR_REG 0x01c
-#define PCIE_INTR_ENABLE0_REG 0x020
-#define PCIE_INTR_ENABLE1_REG 0x024
-#define PCIE_EP1_FUNC_TC_REG 0x028
-#define PCIE_EP2_FUNC_TC_REG 0x02c
-#define PCIE_EP3_FUNC_TC_REG 0x030
-#define PCIE_EP4_FUNC_TC_REG 0x034
-#define PCIE_EP1_FUNC_F_REG 0x038
-#define PCIE_EP2_FUNC_F_REG 0x03c
-#define PCIE_EP3_FUNC_F_REG 0x040
-#define PCIE_EP4_FUNC_F_REG 0x044
-#define PCIE_PAB_AMBA_SW_RST_REG 0x048
-#define PCIE_PM_STATUS_0_PORT_0_4 0x04c
-#define PCIE_PM_STATUS_7_0_EP1 0x050
-#define PCIE_PM_STATUS_7_0_EP2 0x054
-#define PCIE_PM_STATUS_7_0_EP3 0x058
-#define PCIE_PM_STATUS_7_0_EP4 0x05c
-#define PCIE_DEV_ID_0_EP1_REG 0x060
-#define PCIE_CC_REV_ID_0_EP1_REG 0x064
-#define PCIE_DEV_ID_1_EP1_REG 0x068
-#define PCIE_CC_REV_ID_1_EP1_REG 0x06c
-#define PCIE_DEV_ID_2_EP1_REG 0x070
-#define PCIE_CC_REV_ID_2_EP1_REG 0x074
-#define PCIE_DEV_ID_3_EP1_REG 0x078
-#define PCIE_CC_REV_ID_3_EP1_REG 0x07c
-#define PCIE_DEV_ID_4_EP1_REG 0x080
-#define PCIE_CC_REV_ID_4_EP1_REG 0x084
-#define PCIE_DEV_ID_5_EP1_REG 0x088
-#define PCIE_CC_REV_ID_5_EP1_REG 0x08c
-#define PCIE_DEV_ID_6_EP1_REG 0x090
-#define PCIE_CC_REV_ID_6_EP1_REG 0x094
-#define PCIE_DEV_ID_7_EP1_REG 0x098
-#define PCIE_CC_REV_ID_7_EP1_REG 0x09c
-#define PCIE_DEV_ID_0_EP2_REG 0x0a0
-#define PCIE_CC_REV_ID_0_EP2_REG 0x0a4
-#define PCIE_DEV_ID_1_EP2_REG 0x0a8
-#define PCIE_CC_REV_ID_1_EP2_REG 0x0ac
-#define PCIE_DEV_ID_2_EP2_REG 0x0b0
-#define PCIE_CC_REV_ID_2_EP2_REG 0x0b4
-#define PCIE_DEV_ID_3_EP2_REG 0x0b8
-#define PCIE_CC_REV_ID_3_EP2_REG 0x0bc
-#define PCIE_DEV_ID_4_EP2_REG 0x0c0
-#define PCIE_CC_REV_ID_4_EP2_REG 0x0c4
-#define PCIE_DEV_ID_5_EP2_REG 0x0c8
-#define PCIE_CC_REV_ID_5_EP2_REG 0x0cc
-#define PCIE_DEV_ID_6_EP2_REG 0x0d0
-#define PCIE_CC_REV_ID_6_EP2_REG 0x0d4
-#define PCIE_DEV_ID_7_EP2_REG 0x0d8
-#define PCIE_CC_REV_ID_7_EP2_REG 0x0dC
-#define PCIE_DEV_ID_0_EP3_REG 0x0e0
-#define PCIE_CC_REV_ID_0_EP3_REG 0x0e4
-#define PCIE_DEV_ID_1_EP3_REG 0x0e8
-#define PCIE_CC_REV_ID_1_EP3_REG 0x0ec
-#define PCIE_DEV_ID_2_EP3_REG 0x0f0
-#define PCIE_CC_REV_ID_2_EP3_REG 0x0f4
-#define PCIE_DEV_ID_3_EP3_REG 0x0f8
-#define PCIE_CC_REV_ID_3_EP3_REG 0x0fc
-#define PCIE_DEV_ID_4_EP3_REG 0x100
-#define PCIE_CC_REV_ID_4_EP3_REG 0x104
-#define PCIE_DEV_ID_5_EP3_REG 0x108
-#define PCIE_CC_REV_ID_5_EP3_REG 0x10c
-#define PCIE_DEV_ID_6_EP3_REG 0x110
-#define PCIE_CC_REV_ID_6_EP3_REG 0x114
-#define PCIE_DEV_ID_7_EP3_REG 0x118
-#define PCIE_CC_REV_ID_7_EP3_REG 0x11c
-#define PCIE_DEV_ID_0_EP4_REG 0x120
-#define PCIE_CC_REV_ID_0_EP4_REG 0x124
-#define PCIE_DEV_ID_1_EP4_REG 0x128
-#define PCIE_CC_REV_ID_1_EP4_REG 0x12c
-#define PCIE_DEV_ID_2_EP4_REG 0x130
-#define PCIE_CC_REV_ID_2_EP4_REG 0x134
-#define PCIE_DEV_ID_3_EP4_REG 0x138
-#define PCIE_CC_REV_ID_3_EP4_REG 0x13c
-#define PCIE_DEV_ID_4_EP4_REG 0x140
-#define PCIE_CC_REV_ID_4_EP4_REG 0x144
-#define PCIE_DEV_ID_5_EP4_REG 0x148
-#define PCIE_CC_REV_ID_5_EP4_REG 0x14c
-#define PCIE_DEV_ID_6_EP4_REG 0x150
-#define PCIE_CC_REV_ID_6_EP4_REG 0x154
-#define PCIE_DEV_ID_7_EP4_REG 0x158
-#define PCIE_CC_REV_ID_7_EP4_REG 0x15c
-#define PCIE_SUBSYS_VEN_ID_REG 0x160
-#define PCIE_COMMON_CLOCK_CONFIG_0_4_0 0x164
-#define PCIE_MIPHYP_SSC_EN_REG 0x168
-#define PCIE_MIPHYP_ADDR_REG 0x16c
-#define PCIE_L1_ASPM_READY_REG 0x170
-#define PCIE_EXT_CFG_RDY_REG 0x174
-#define PCIE_SoC_INT_ROUTER_STATUS0_REG 0x178
-#define PCIE_SoC_INT_ROUTER_STATUS1_REG 0x17c
-#define PCIE_SoC_INT_ROUTER_STATUS2_REG 0x180
-#define PCIE_SoC_INT_ROUTER_STATUS3_REG 0x184
-#define DMA_IP_CTRL_REG 0x324
-#define DISP_BRIDGE_PU_PD_CTRL_REG 0x328
-#define VIP_PU_PD_CTRL_REG 0x32c
-#define USB_MLB_PU_PD_CTRL_REG 0x330
-#define SDIO_PU_PD_MISCFUNC_CTRL_REG1 0x334
-#define SDIO_PU_PD_MISCFUNC_CTRL_REG2 0x338
-#define UART_PU_PD_CTRL_REG 0x33c
-#define ARM_Lock 0x340
-#define SYS_IO_CHAR_REG1 0x344
-#define SYS_IO_CHAR_REG2 0x348
-#define SATA_CORE_ID_REG 0x34c
-#define SATA_CTRL_REG 0x350
-#define I2C_HSFIX_MISC_REG 0x354
-#define SPARE2_RESERVED 0x358
-#define SPARE3_RESERVED 0x35c
-#define MASTER_LOCK_REG 0x368
-#define SYSTEM_CONFIG_STATUS_REG 0x36c
-#define MSP_CLK_CTRL_REG 0x39c
-#define COMPENSATION_REG1 0x3c4
-#define COMPENSATION_REG2 0x3c8
-#define COMPENSATION_REG3 0x3cc
-#define TEST_CTL_REG 0x3d0
-
-/*
- * SECR (OTP) registers
- */
-#define STA2X11_SECR_CR 0x00
-#define STA2X11_SECR_FVR0 0x10
-#define STA2X11_SECR_FVR1 0x14
-
-extern int sta2x11_mfd_get_regs_data(struct platform_device *pdev,
- enum sta2x11_mfd_plat_dev index,
- void __iomem **regs,
- spinlock_t **lock);
-
-#endif /* __STA2X11_MFD_H */
--
1.7.7.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/