Re: ioatdma: add ioat_raid_enabled module parameter

[Dan Williams]

On 8/2/13 12:34 AM, "Brice Goglin" <Brice.Goglin@xxxxxxxx> wrote:

>Le 01/08/2013 19:15, Jiang, Dave a écrit :
>> On Thu, 2013-08-01 at 10:11 -0700, Jon Mason wrote:
>>> On Wed, Jul 31, 2013 at 03:14:07PM -0700, Jiang, Dave wrote:
>>>> I'm ok with enabling this for people that just want to use DMA and not
>>>> RAID. 
>>> I might be crazy, but I'd be in favor of disabling the RAID offload by
>>> default on non-Atom platforms.
>>>
>> I suppose. Technically it is disabled starting with 3.10 because of the
>> channel switch issue. I'm ok with this disabled by default for the 3.2
>> platforms that has broken pq-val.
>>
>
>Here's a patch that may do what you guys are saying.
>
>Brice
>
>
>
>ioatdma: disable RAID by default when buggy and add module param
>
>Commit f26df1a1 added a 64-byte alignment requirement for legacy
>operations to work around a silicon errata when mixing legacy and
>RAID descriptors.
>
>RAID offload is now disabled by default on buggy 3.2 platforms.
>Passing ioat_raid_enabled=1 force-enables it on all platforms
>(previous behavior).
>Passing ioat_raid_enabled=0 force-disables it everywhere.
>
>When RAID offload is disabled, legacy operations (memcpy, etc.)
>can work again without alignment restrictions.
>
>Signed-off-by: Brice Goglin <Brice.Goglin@xxxxxxxx>
>---
> drivers/dma/ioat/dma_v3.c |   16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
>Index: b/drivers/dma/ioat/dma_v3.c
>===================================================================
>--- a/drivers/dma/ioat/dma_v3.c	2013-07-31 23:06:24.163810000 +0200
>+++ b/drivers/dma/ioat/dma_v3.c	2013-08-02 09:28:51.817037742 +0200
>@@ -67,6 +67,11 @@
> #include "dma.h"
> #include "dma_v2.h"
> 
>+static int ioat_raid_enabled = -1;
>+module_param(ioat_raid_enabled, int, 0444);
>+MODULE_PARM_DESC(ioat_raid_enabled,
>+		 "control support of RAID offload (-1=enabled unless broken [default],
>0=disabled, 1=enabled)");
>+
> /* ioat hardware assumes at least two sources for raid operations */
> #define src_cnt_to_sw(x) ((x) + 2)
> #define src_cnt_to_hw(x) ((x) - 2)
>@@ -1775,7 +1780,7 @@ int ioat3_dma_probe(struct ioatdma_devic
> 	dma->device_alloc_chan_resources = ioat2_alloc_chan_resources;
> 	dma->device_free_chan_resources = ioat2_free_chan_resources;
> 
>-	if (is_xeon_cb32(pdev))
>+	if (ioat_raid_enabled == 1 && is_xeon_cb32(pdev))
> 		dma->copy_align = 6;

Actually we can delete this now because is_xeon_cb32() already effectively
means that raid offload will not be used.

> 
> 	dma_cap_set(DMA_INTERRUPT, dma->cap_mask);
>@@ -1783,7 +1788,14 @@ int ioat3_dma_probe(struct ioatdma_devic
> 
> 	device->cap = readl(device->reg_base + IOAT_DMA_CAP_OFFSET);
> 
>-	if (is_bwd_noraid(pdev))
>+	/* disable RAID if:
>+	 *    force-disabled by module param,
>+	 * or not force-enabled on buggy 3.2 platforms,
>+	 * or not actually supported.
>+	 */
>+	if (ioat_raid_enabled == 0
>+	    || (ioat_raid_enabled != 1 && is_xeon_cb32(pdev))
>+	    || is_bwd_noraid(pdev))
> 		device->cap &= ~(IOAT_CAP_XOR | IOAT_CAP_PQ | IOAT_CAP_RAID16SS);
> 
> 	/* dca is incompatible with raid operations */
>

I like Jon¹s suggestion.  Just make raid disabled by default on non-atom
platforms.  When if a non-atom platform comes along without the previous
restrictions it can add itself to this list.

So let¹s drop the module parameter and just cleanup the 3.2 support to
reflect the current reality of raid being disabled.

--
Dan

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/