Re: [PATCH 5/5] usb: musb: dsps: use proper child nodes

[Sebastian Andrzej Siewior]

On 08/01/2013 07:24 AM, George Cherian wrote:
>> b/arch/arm/boot/dts/am33xx.dtsi
>> index 38b446b..0f756ca 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -333,21 +337,85 @@
>>               status = "disabled";
>>           };
>>   -        usb@47400000 {
>> -            compatible = "ti,musb-am33xx";
>> -            reg = <0x47400000 0x1000    /* usbss */
>> -                   0x47401000 0x800        /* musb instance 0 */
>> -                   0x47401800 0x800>;    /* musb instance 1 */
>> -            interrupts = <17        /* usbss */
>> -                      18        /* musb instance 0 */
>> -                      19>;        /* musb instance 1 */
>> -            multipoint = <1>;
>> -            num-eps = <16>;
>> -            ram-bits = <12>;
>> -            port0-mode = <3>;
>> -            port1-mode = <3>;
>> -            power = <250>;
>> +        usb: usb@47400000 {
>> +            compatible = "ti,am33xx-usb";
>> +            reg = <0x47400000 0x1000>;
>> +            ranges;
>> +            #address-cells = <1>;
>> +            #size-cells = <1>;
>>               ti,hwmods = "usb_otg_hs";
>> +            status = "disabled";
>> +
>> +            ctrl_mod: control@44e10000 {
>> +                compatible = "ti,am335x-ctrl-module";
>> +                reg = <0x44e10000 0x650>;
> 
> Do you really need to map Control Module base to 0x650? If some other
> driver does this mapping

This is what I cam currently not sure about. Either we minimize the
register window and introduce two (the other wakeup) or we keep using
the same reset driver for other devices.

> we will always end returning -EPROBE_DEFER.
> 
> How about this
>     reg =     <0x44e10620 0x4> ,
this has to be 16 bytes in size

>         <0x44e10648 0x1>;
this has to be 4 bytes in size.

>     reg-names = "phycontrol_dev" , "phywkup_dev";
> 
> and map for power on/off and phywkup separately in the control driver.
> 
>> +                reg-names = "control_dev";
>> +                status = "disabled";
>> +            };
>> +
> 
> <snip>
> 
>> diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
>> index 797e3fd..b7257ae 100644
>> --- a/drivers/usb/musb/Kconfig
>> +++ b/drivers/usb/musb/Kconfig
>> @@ -83,6 +83,7 @@ config USB_MUSB_AM35X
>>     config USB_MUSB_DSPS
>>       tristate "TI DSPS platforms"
>> +    select USB_MUSB_AM335X_CHILD
> 
> How about adding select AM335X_PHY_USB here?

For now maybe a good think but if we do multi platform support we
should recommend them instead of forcing users. What you think?

Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/