Re: [PATCH 2/2] ARM: dts: USB for Tegra114 Dalmore

[Sergei Shtylyov]

Hello.

On 07/31/2013 09:42 PM, Tuomas Tynkkynen wrote:

> From: Mikko Perttunen <mperttunen@xxxxxxxxxx>

> Device tree entries for the three EHCI controllers on Tegra114.
> Enables the the third controller (USB host) on Dalmore.

   I would have done the board patch separately from the SoC one.

> Signed-off-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
[...]

> diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
> index abf6c40..2905145 100644
> --- a/arch/arm/boot/dts/tegra114.dtsi
> +++ b/arch/arm/boot/dts/tegra114.dtsi
> @@ -430,6 +430,68 @@
>   		status = "disable";
>   	};
>
> +	usb@7d000000 {
> +		compatible = "nvidia,tegra30-ehci", "usb-ehci";
> +		reg = <0x7d000000 0x4000>;
> +		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> +		phy_type = "utmi";
> +		clocks = <&tegra_car TEGRA114_CLK_USBD>;
> +		nvidia,phy = <&phy1>;
> +		status = "disabled";
> +	};
> +
> +	phy1: usb-phy@7d000000 {

   At the same address as the previous node?

> +		compatible = "nvidia,tegra30-usb-phy";
> +		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;

   Hm, there must be some mistake: two similar register ranges.

> +	usb@7d008000 {
> +		compatible = "nvidia,tegra30-ehci", "usb-ehci";
> +		reg = <0x7d008000 0x4000>;
> +		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> +		phy_type = "utmi";
> +		clocks = <&tegra_car TEGRA114_CLK_USB3>;
> +		nvidia,phy = <&phy3>;
> +		status = "disabled";
> +	};
> +
> +	phy3: usb-phy@7d008000 {

   Again at the same address as previous node?

> +		compatible = "nvidia,tegra30-usb-phy";
> +		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;

   Second range conflicts with previous nodes.

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/