[PATCH v5] watchdog: Add MOXA ART watchdog driver

From: Jonas Jensen
Date: Mon Jul 29 2013 - 06:21:06 EST


Add watchdog driver for MOXA ART SoCs.

Signed-off-by: Jonas Jensen <jonas.jensen@xxxxxxxxx>
---

Notes:
Changes since v4:

1. #include <linux/err.h> because IS_ERR comes from there
2. #include <linux/kernel.h> because UINT_MAX comes from there
3. #include <linux/moduleparam.h> because module_param() comes from there

device tree bindings document:
4. describe compatible variable "Must be" instead of "Should be".
5. change description so it's from the point of view of the device

Applies to next-20130729

.../bindings/watchdog/moxa,moxart-watchdog.txt | 15 ++
drivers/watchdog/Kconfig | 10 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/moxart_wdt.c | 169 +++++++++++++++++++++
4 files changed, 195 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
create mode 100644 drivers/watchdog/moxart_wdt.c

diff --git a/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt b/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
new file mode 100644
index 0000000..1169857
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
@@ -0,0 +1,15 @@
+MOXA ART Watchdog timer
+
+Required properties:
+
+- compatible : Must be "moxa,moxart-watchdog"
+- reg : Should contain registers location and length
+- clocks : Should contain phandle for the clock that drives the counter
+
+Example:
+
+ watchdog: watchdog@98500000 {
+ compatible = "moxa,moxart-watchdog";
+ reg = <0x98500000 0x10>;
+ clocks = <&coreclk>;
+ };
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 362085d..6883aab 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -382,6 +382,16 @@ config RETU_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called retu_wdt.

+config MOXART_WDT
+ tristate "MOXART watchdog"
+ depends on ARCH_MOXART
+ help
+ Say Y here to include Watchdog timer support for the watchdog
+ existing on the MOXA ART SoC series platforms.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moxart_wdt.
+
# AVR32 Architecture

config AT32AP700X_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 2f26a0b..7cab53a 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
+obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o

# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/moxart_wdt.c b/drivers/watchdog/moxart_wdt.c
new file mode 100644
index 0000000..d79dc9c
--- /dev/null
+++ b/drivers/watchdog/moxart_wdt.c
@@ -0,0 +1,169 @@
+/*
+ * MOXA ART SoCs watchdog driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@xxxxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/moduleparam.h>
+
+#define REG_COUNT 0x4
+#define REG_MODE 0x8
+#define REG_ENABLE 0xC
+
+struct moxart_wdt_dev {
+ struct watchdog_device dev;
+ void __iomem *base;
+ unsigned int clock_frequency;
+};
+
+static int heartbeat;
+
+static int moxart_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
+
+ writel(0, moxart_wdt->base + REG_ENABLE);
+
+ return 0;
+}
+
+static int moxart_wdt_start(struct watchdog_device *wdt_dev)
+{
+ struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
+
+ writel(moxart_wdt->clock_frequency * moxart_wdt->dev.timeout,
+ moxart_wdt->base + REG_COUNT);
+ writel(0x5ab9, moxart_wdt->base + REG_MODE);
+ writel(0x03, moxart_wdt->base + REG_ENABLE);
+
+ return 0;
+}
+
+static int moxart_wdt_set_timeout(struct watchdog_device *wdt_dev,
+ unsigned int timeout)
+{
+ struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
+
+ dev_dbg(wdt_dev->dev, "%s: timeout=%u\n", __func__, timeout);
+
+ moxart_wdt->dev.timeout = timeout;
+
+ return 0;
+}
+
+static const struct watchdog_info moxart_wdt_info = {
+ .identity = "moxart-wdt",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops moxart_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = moxart_wdt_start,
+ .stop = moxart_wdt_stop,
+ .set_timeout = moxart_wdt_set_timeout,
+};
+
+static int moxart_wdt_probe(struct platform_device *pdev)
+{
+ struct moxart_wdt_dev *moxart_wdt;
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct resource *res;
+ struct clk *clk;
+ int err;
+ unsigned int max_timeout;
+ bool nowayout = WATCHDOG_NOWAYOUT;
+
+ moxart_wdt = devm_kzalloc(&pdev->dev, sizeof(*moxart_wdt), GFP_KERNEL);
+ if (!moxart_wdt)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, moxart_wdt);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ moxart_wdt->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(moxart_wdt->base))
+ return PTR_ERR(moxart_wdt->base);
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("%s: of_clk_get failed\n", __func__);
+ return PTR_ERR(clk);
+ }
+
+ moxart_wdt->clock_frequency = clk_get_rate(clk);
+ if (moxart_wdt->clock_frequency == 0) {
+ pr_err("%s: incorrect clock frequency\n", __func__);
+ return -EINVAL;
+ }
+
+ max_timeout = UINT_MAX / moxart_wdt->clock_frequency;
+
+ moxart_wdt->dev.info = &moxart_wdt_info;
+ moxart_wdt->dev.ops = &moxart_wdt_ops;
+ moxart_wdt->dev.timeout = max_timeout;
+ moxart_wdt->dev.min_timeout = 1;
+ moxart_wdt->dev.max_timeout = max_timeout;
+ moxart_wdt->dev.parent = &pdev->dev;
+
+ watchdog_init_timeout(&moxart_wdt->dev, heartbeat, &pdev->dev);
+ watchdog_set_nowayout(&moxart_wdt->dev, nowayout);
+
+ watchdog_set_drvdata(&moxart_wdt->dev, moxart_wdt);
+
+ err = watchdog_register_device(&moxart_wdt->dev);
+ if (unlikely(err))
+ return err;
+
+ dev_dbg(dev, "Watchdog enabled (heartbeat=%d sec, nowayout=%d)\n",
+ moxart_wdt->dev.timeout, nowayout);
+
+ return 0;
+}
+
+static int moxart_wdt_remove(struct platform_device *pdev)
+{
+ struct moxart_wdt_dev *moxart_wdt = platform_get_drvdata(pdev);
+
+ moxart_wdt_stop(&moxart_wdt->dev);
+ watchdog_unregister_device(&moxart_wdt->dev);
+
+ return 0;
+}
+
+static const struct of_device_id moxart_watchdog_match[] = {
+ { .compatible = "moxa,moxart-watchdog" },
+ { },
+};
+
+static struct platform_driver moxart_wdt_driver = {
+ .probe = moxart_wdt_probe,
+ .remove = moxart_wdt_remove,
+ .driver = {
+ .name = "moxart-watchdog",
+ .owner = THIS_MODULE,
+ .of_match_table = moxart_watchdog_match,
+ },
+};
+module_platform_driver(moxart_wdt_driver);
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds");
+
+MODULE_DESCRIPTION("MOXART watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@xxxxxxxxx>");
--
1.8.2.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/