Re: [PATCH 3/5] devicetree: create a separate binding descriptionfor sata_highbank

[Rob Herring]

On 07/26/2013 10:11 AM, Mark Langsdorf wrote:
> The Calxeda sata_highbank driver has been adding its descriptions to the
> ahci driver. Separate them properly.
>
> Signed-off-by: Mark Langsdorf <mark.langsdorf@xxxxxxxxxxx>

Acked-by: Rob Herring <rob.herring@xxxxxxxxxxx>

Rob

> ---
>  .../devicetree/bindings/ata/ahci-platform.txt      | 14 ++--------
>  .../devicetree/bindings/ata/sata_highbank.txt      | 32 ++++++++++++++++++++++
>  2 files changed, 34 insertions(+), 12 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/ata/sata_highbank.txt
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> index 3ec0c5c..14d7b22 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> @@ -4,27 +4,17 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
>  Each SATA controller should have its own node.
>  
>  Required properties:
> -- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
> +- compatible        : compatible list, contains "snps,spear-ahci"
>  - interrupts        : <interrupt mapping for SATA IRQ>
>  - reg               : <registers mapping>
>  
>  Optional properties:
> -- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
> -			SATA port to a combophy and a lane within that
> -			combophy
> -- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
> -			which indicates that the driver supports SGPIO
> -			indicator lights using the indicated GPIOs
> -- calxeda,led-order : a u32 array that map port numbers to offsets within the
> -			SGPIO bitstream.
>  - dma-coherent      : Present if dma operations are coherent
>  
>  Example:
>          sata@ffe08000 {
> -		compatible = "calxeda,hb-ahci";
> +		compatible = "snps,spear-ahci";
>                  reg = <0xffe08000 0x1000>;
>                  interrupts = <115>;
> -		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
> -					&combophy0 2 &combophy0 3>;
>  
>          };
> diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt
> new file mode 100644
> index 0000000..aa1b798
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt
> @@ -0,0 +1,32 @@
> +* Calxeda AHCI SATA Controller
> +
> +SATA nodes are defined to describe on-chip Serial ATA controllers.
> +The Calxeda SATA controller mostly conforms to the AHCI interface
> +with some special extensions to add functionality.
> +Each SATA controller should have its own node.
> +
> +Required properties:
> +- compatible        : compatible list, contains "calxeda,hb-ahci"
> +- interrupts        : <interrupt mapping for SATA IRQ>
> +- reg               : <registers mapping>
> +
> +Optional properties:
> +- dma-coherent      : Present if dma operations are coherent
> +- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
> +			SATA port to a combophy and a lane within that
> +			combophy
> +- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
> +			which indicates that the driver supports SGPIO
> +			indicator lights using the indicated GPIOs
> +- calxeda,led-order : a u32 array that map port numbers to offsets within the
> +			SGPIO bitstream.
> +
> +Example:
> +        sata@ffe08000 {
> +		compatible = "calxeda,hb-ahci";
> +                reg = <0xffe08000 0x1000>;
> +                interrupts = <115>;
> +		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
> +					&combophy0 2 &combophy0 3>;
> +
> +        };
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/